HRBC/JPM(E)/NIT/21/25-26

200W

150W

100W

i) Lumen efficacy > or = 135 Lumen/ Watt, ii) CCT- 5700K iii) CRI = or > 70 iv) THD < or = 10% (at Full Load), v) SDCM < or = 05, vi) P.F = or > 0.95. viii) Efficiency should be = or > 85%, ix) The Driver (Make - XITANIUM / OSRAM / INVENTRONICS/ Philips/Wipro/Crompton) should be a potted driver with class-1 protection and inbuilt short circuit, open circuit, over voltage and under voltage protection and mounted inside the luminaire. Wattage of the Driver should always be greater than OR equal to the Wattage of the Luminaire. x) PC/PMMA lens should be provided for each LED xi)LED SMD type only High power leds 1-3W, & The LED chip module(make- Osram / Nichia / Cree/Lumiled) xii) LED chip module should not be overdriven or underdriven by the driver as compared to its rated current as per OEM standard. xiii) The luminer must have pure polyester powder coated pressure die cast Al. housing IP 66, impact resistance IK 10 xiv) SPD internal should be 4 KV and external should be 10 KV,and covered in proper housing. xv) Luminaire and Driver both should have the life of 50000 burning hour (with only 30% lumen degradation or 70% lumen maintenance) as per TM-21 report