Spl repair of Bldg (08 X QTRS) of 4 INF DEF and EMP COY at Old Cantt Prayagraj.

Taking down Chowkats or frames, area of opening n'exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down Chowkats or frames, area of opening exc 1.5 Sqm but n'exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

S&F Pressed steel frame 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed, including preparation of new primed surface and applying two coats of synthetic enamel paint over steel surface complete all as specified and directed

S&F Pressed steel frame 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and fixed, including preparation of new primed surface and applying two coats of synthetic enamel paint over steel surface complete all as specified and directed

M & L for PCC (1 2 4) type B-1 using 20mm for filling in door frames complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid Frames/ Chowkhat for door/ window/ Ceosetory windows etc of size 45 x 70 mm, fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. NOTE : (i) The WPC shall comprising of virgin PVC polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms). (ii) The frame shall fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws. (iii) The WPC shall have minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. (iv) The cost of M.S. hold fast/ lugs or SS dash fasteners shall deemed included in quoted unit rate. Each frame shall be fixed with min 06x holdfasts/ faster's.

S&F 30 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

All as pe item No. 07 above but decorative type flush door shutter of size 35mm thick

S&F 30mm thick plain WPC factory made glazed Skeleton door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. Door should be fixed with SS hinges and SS screws. Door should be water prrof, termite proof, fire retardant and having screw holding capacity complete all as per manufacturers specification & drawings & as directed by Engr-in-charge. (Note: Required stainless steel butt hinges and necessary S S screws shall be included and stainless steel wiremesh also included.)

M&l for providing and fixing factory made UPVC Sliding window (Three track white colour), area n'exc 2.0Sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2+ -0.2mm thick, Touch Lock of zinc alloyed (white powder coated), roller system, wire cloth and/or plain glass in penal of shutters, fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. Note: Window profile shall be hollow section with multi chamber. All sections shall be miterd cut and fusion welded at all corners. Size of profiles/ sections shall be as under :- (i) Frame - 88mm x 52mm duly inserted galvanised steel section having size 30mm x 18mm -2 nos, (ii) Sliding sash - 42mm x 67mm duly inserted galvanised steel section having size 30mm x 18mm (iii) Sliding mesh Sash - 42mm x 57mm , duly inserted galvanised steel section having size 26mm x 10mm (iv) Sliding interlock (One vertical length in each shutters-45.5mm x 28mm), (v) Glazing bead - 24.5mm x 16mm . (vi) The unit rate quoted by contractor excludes cost of glass and wire cloth but includes all other connected accessories. Net Opening will be measured for payment purpose.

M&L for providing and fixing factory made uPVC white colour fixed window (Area exceeding 1.00 sqm but not exceeding 2.00 sqm each), made of extruded profiles with wall thickness of 2.3mm(+-0.2mm) including drilling of holes for fixing hardware and drainage of water etc., m making arrangement for fixing of hardware, EPDM gasket, 1.2+ -0.2mm thick, Touch Lock of zinc alloyed (white powder coated), roller system, wire cloth and/or plain glass in penal of shutters, fixed to the wall with 8mm x 100mm long fasteners complete all as specified and directed. Note: Window profile shall be hollow section with multi chamber. All sections shall be miterd cut and fusion welded at all corners. Size of profiles/ sections shall be as under :- (i) Frame - 88mm x 52mm duly inserted galvanised steel section having size 30mm x 18mm - 2 Nos, (ii) Sliding sash - 42mm x 67mm duly inserted galvanised steel section having size 30mm x 18mm (iii) Sliding mesh Sash - 42mm x 57mm , duly inserted galvanised steel section having size 26mm x 10mm (iv) Sliding interlock (One vertical length in each shutters-45.5mm x 28mm), (v) Glazing bead - 24.5mm x 16mm . (i) Frame - 60mm x 58mm duly inserted galvanised steel section having size 28mm x 21.5mm. (ii) 'T' profile/section (One vertical length in between two shutters-60mm x 74mm duly inserted galvanised steel section having size 27mm x 17 mrn. (iii) Glazing bead -35mm x 20mm (iv) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.

S&F stainless steel wire mesh, 0.56mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

S&F 5.5 mm thick plain sheet glass as in,shutters with and including rubber gasket and natural colour anodized aluminium snap beading/glazing, clips etc complete all as specified and directed.

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazingoil putty n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for providing and applying approved quality weatherproof silicone sealant around the perimeter of uPVC window frames (internal and external sides) to seal the gap between frame and masonry/plaster surface, masking, and cleaning, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 150mm long SS handles with required full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F 200mm long SS barrel tower bolts with required full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F 250 mm long SS sliding door bolt with hasp, staple (bolt type) and fixing clips with required full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F 100 mm long SS butt hinges with required full body threaded star headed counter sunk S.S screws, complete all as specified and directed

S&F 300 mm long, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed

Dismantling of wooden boarding of any description fixed in any position with screws / nails etc , complete all as specified and directed.

M&L for providing and fixing 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid board shutters for cup boards, work stations and bathroom/kitchen cabinet etc, one side white color and other side laminted fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note : (i) WPC shall comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. (ii) WPCshall be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter. (iii) stainless steel butt hinges and necessary S.S screws shall be paid separately

M&L for providing and fixing 12 mm thick factory made single extruded WPC (Wood Polymer composite) solid plain both side white color board for backing of cup boards and bathroom/kitchen cabinets etc. with stainless steel screws etc. complete all as specified and directed Note : WPC shall comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant.

S&F 30mm wide stainless steel continuous (piano) hinges with required full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F 150 mm Hasp and staple, stainless steel, wire type, including bolt to hinge plate with required full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F 50mm magnetic catches for cabinets with striking plate & magnetic stud as per sample kept in GE's offce and as approved complete all as specified and directed.

S&F stainless steel 150mm dia oval shape handle fancy type brass polished bright finish with required full body threaded star headed counter sunk S.S screwscomplete all as specified and directed.

M&L for 40 mm dia CP brass cuboard knobs fixed with nuts ,screws and washers, bright polished complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down drapery rod including bracket and cap, any discription and pattern complete all as specified and directed.

S&F 25 mm dia stainless steel drapery rod cut to size and fixed in position including brackets, cap both ends fixed to wall complete all as directed. Note : Drapery rod for each door/ window /ventilator/ opening shall contain one pair breacket and one cap on ceach side Brakets and caps shall be strictly as per sample kept in GE's office.

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: (i) Water proofing compound shall be mixed @ 200ml per 50Kg cement (min) or as per manufecturer's specification. WPC shall be measured & paid seprately under respective item here-in-under as 'SUPPLY ONLY'. (ii) The unit rates quoted shall be applicable for exicution of work up to 10m height and deemed included cost of all T&P ,scafolding and all safety precaution (i.e. Safety Jacket, Safety Shoes, Safety Masks, Safety Helmet, Safety harness, Safety Goggles etc) required for smooth exicution of work. Without safety precaution this work will not be allow to commence.

M&L for rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: (i) The unit rates quoted shall be applicable for exicution of work up to 10m height and deemed included cost of all T&P ,scafolding and all safety precaution (i.e. Safety Jacket, Safety Shoes, Safety Masks, Safety Helmet, Safety harness, Safety Goggles etc) required for smooth exicution of work. Without safety precaution this work will not be allow to commence.

M&L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finisheing the surface even & fair complete all as specified and directed.

Supply only liquid integral crystalline water proofing compound complete all as specified and directed.

M&L for complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit), make surface clean, free from dust, loose paint etc complete all as specified and directed.

M&L for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon addictive & color stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algal propertiess in two coats @ 1.79 ltrs (undiluted)/10sq mtrs diluted with water as per manufacturer instruction applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m. the spray machine should be of reputed paint manufacturer as mentioned in PS and accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface using auto roller for making the surface uniform complete all as specified and directed. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Make of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent make as mentioned in Appx 'D' Note- The contractor shall obtain approval of the agency from GE and shall enter a memorandum of understanding (MOU) with the manufacturer duly approved by GE. The execution of work shall be commenced after the submission of MOU and necessary approval from the Engineer-in-charge. MOU shall be valid during currency of work. However during defectlibality period, if any defect is noticed, the contractor shall only be responsible for the rectification of same.

M&L for 1mm thick wall care putty with one coat of acrylic water based exterior grade primer @0.9 ltrs (undiluted)/10sq mtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. Make of Manufacturer : ASIAN/ BERGER/ NEROLAC or equivalent make as mentioned in Appx 'D'

M&L for preparation of old treated surface of wall by scrapping with wire brush/sanding paper/ metal patti, removing nails etc, and make surface clean, free from dust, loose paint etc, filling drpessions, with wall care putty, to receive decorative coat/painting coat complete all as specified and directed

M&L for applying two coats of oil bound distemper on prepared wall surface complete all as specified and directed.

M&L for applying three coats of white wash on prepared ceiling surfaces, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paints on old steel/wooden surfaces of any description over 10 cm width or girth including preparation of surface complete all as specified and directed.

Dismantling of sheets in roof coverings (corrugated, semicorrugated, etc.) complete all as specified and directed

M&L for prepainted coloured galvaniume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile stregnth of 550 mpa as in roof covering and cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for prepainted coloured galvaniume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to roof wall, fixed with self tapping screws complete all as specified and directed.

M&L for structural steel work using rolled mild steel of grade Fe 410-W(Gde-E- 250)quality-A as in roof trusses (framed and trussed), purlins, crane gantries, rails and fastenings, heavy bracket framing (made from beam, tee, angle, channel or flat sections), including distance pieces, cleats, gusset plates etc., cut to required lengths, hoisted, fixed in position, including welding, bolting or riveting as required complete all as specified and directed.

S&F mild steel screw bolts diameter of neck in 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), remaving serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n'exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement mortar screed bed or bedding layer (1:4) for laying floor finishes complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including10mm thick plaster in cm 1:4 complete all as specified and directed.

M&L for Treatment to sunken floor and sides as mentioned here after:- (Step-I) Cleaning of RCC surface to remove existing treatment to sides and base slab by using sand blasting with compressed air. (Step-II) M&L application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite. (Step-III) M&L 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified. (Step-IV) M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base. Note:All debris obtained from site will be thrown away out side Def Land by contractor at his own expense.

M&L for PCC 1:7:12 type F2 (using 40 mm graded stone aggregate) as in filling into sunken floor complete all as specfied and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F UPVC (SWR) 110 mm dia pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed.

S&F 75 mm dia UPVC (SWR) pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm dia UPVC (SWR) pipes TYPE -B Conforming to IS 13592 single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F UPVC (SWR) 110 mm dia pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm dia UPVC (SWR) bends any radius with oval access door complete all as specified and directed.

S&F 75 mm dia UPVC (SWR) bends with access door any radius complete all as specified and directed.

S&F 110 mm dia UPVC(SWR) plain bends any radius complete all as specified and directed.

S&F 75 mm dia UPVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia UPVC (SWR) branch piece, (double Y) equal or unequal complete all as specified and directed.

S&F 75 mm dia UPVC (SWR) branch piece, (double Y) equal or unequal complete all as specified and directed.

S & F in repair 75 mm dia UPVC floor trap plain with grating including jointing with solvent cement complete all as specified.

M&L for Mild steel work in brackets, clamps, flat iron supports, holdfasts etc., fabricated from MS flat/round/angle sections, including cutting, bending, drilling, welding, and fixing in position to hold rainwater pipes against wall, with necessary bolts, nuts, washers, and painting two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified & directed.

All as per Item No. 73 above but 15mm bore pipe

M&L for Cutting chases, pinning in brick walls not exc 10 cm girth, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc.complete all as specified.

Taking down plumbing fitings any discription, type and pattern ( bib tap, stop cock , pillar tap, mixture / gate valve etc) complete all as specified and directed.

S&F PP-R Gate valves (brass insert), 20mm outer dia complete all as specified and directed.

S&F PP-R Gate valves (brass insert), 25mm outer dia complete all as specified and directed.

S&F 15 mm bore bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. Make: Cat pat No. OPP-SSF-15037PM of Jaquar or eqiuvalent of grohe or Kohlar

S&F 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. Make: Cat pat No. OPP-SSF-15053PM of Jaquar or eqiuvalent of grohe or Kohlar

S&F angle cock, 2 way, with wall flange 15 mm dia cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. Make: Jaquar or eqiuvalent of grohe or Kohlar

S&F central hole basin mixer for WHB cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed. Make: Cat pat No. CQT-CHR-23167B of Jaquar or eqiuvalent of grohe or Kohlar

S&F 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed Make: Cat pat No. CAN-CHR-1185 of Jaquar or eqiuvalent of grohe or Kohlar

S&F Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed. Make: Cat pat No. CQT-CHR-23309 of Jaquar or eqiuvalent of grohe or Kohlar

Taking down bathroom fittings including asseccories any discription, type and pattern ( towel ring/ towel rail/ soap dish/ toilet paper holder/ PVC connection etc/ health faueit/ looking mirror/bathroom cabinate / glass self/ bathroom met etc.) complete all as specified and directed.

S&F Health faucet (Hand shower) with 1 metre flexible tube and wall hook, chromium plated complete all as specified and directed. Make: Cat pat No. ALD-CHR-573 of Jaquar or eqiuvalent of grohe or Kohlar

S&F Overhead Rain shower SS 100 mm dia (4") with 200 mm (8") long shower arm and wall flange complete all as specified and directed. Make: Cat pat No. F7020109SS of CERA or eqiuvalent of grohe or Kohlar or Jaquarr

S&F Tubler towel rail 600mm Long, chromium plated, including brackets fixed to wall with stainless steel screws, complete all as specified and directed. Make: Cat pat No. CAN-CHR-35711PS of Jaquar or eqiuvalent of grohe or Kohlar

S&F SS soap dish primium quality (as per sample kept in GE office) fixed to wall/ doors complete all as specified and directed. Make: Cat pat No. AQN-CHR-7731 of Jaquar or eqiuvalent of grohe or Kohlar

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F glass shelf matt finished chromium plated (MCH/Colour CP) with bracket and fittings (as per sample kept in GE office) fixed to wall complete all as specified and Make: Cat pat No. CAN-CHR-1171N of Jaquar or eqiuvalent of grohe or Kohlar

S&F corner glass shelf superior quality matt finished crromium plated (MCH/Colour CP ) with bracket and fittings (as per sample kept in GE office) fixed to wall complete all as specified and directed. Make: Cat pat No. ACN-CHR-1173 of Jaquar or eqiuvalent of grohe or Kohlar

Taking down sanitory fittings including asseccories any discription, type and pattern (WC/EWC/ WHB/ flushing cistern etc ) complete all as specified and directed.

S&F vitreous china wash hand basin with pedestal pattern, white, flat back, size 550 x 400 mm, excluding taps, waste chain and plug, but including bracket, 32 mm waste coupling, and flexible PVC waste pipe, complete all as specified and directed. Make: Cat pat No. CNS-WHT-801 of Jaquar or eqiuvalent of grohe or Kohlar

S&F Vitreous China pedestal pattern (P-trap), white, with integral foot rests including setting the trap and pan in concrete, complete all as specified and directed. Make: Cat pat No. CNS-WHT-551SSPP of Jaquar or eqiuvalent of grohe or Kohlar

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete, complete all as specified and directed. Make: Cat pat No. CNS-WHT-451 of Jaquar or eqiuvalent of grohe or Kohlar

S&F 10 ltrs PVC (White) valve less syphonic action type, Slim Wall Hung flushing cistern, low level with installation kit, drainage pipe, inlet ball valve float, handle, aluminium brackets for bottom support complete fixing with gitties embeded in wall etc complete all as specified and directed. WHC-Make: Cat pat No. WHC-WHT-184T of Jaquar or eqiuvalent of grohe or Kohlar

Dismantling water tanks exc 250 ltr but n'exc 500 Ltrs capicity, any type and discription including removing from site complete all as specified and directed.

S&F 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Taking down existing sink / steel pate rack etc of any type, size and discription including it's assesories complete all as specified and directed.

S&F sinks without drainage board made of stainless steel 1.0 mm thick (kitchen or laboratory type) of overall size: 495 mm × 420 mm; bowl size: 410 mm × 330 mm × 160 mm, with plugs, washers and wastes; including bedding in cement mortar on / to dwarf wall or fixing with cantilever brackets, connecting union to pipe, PVC waste pipe , uPVC bottle trap, complete all as specified and directed

S&F Stailness steel plate rack of size 910mm x 780mm x 250mm (31'' x 36 " 10") with separators and 3 tier shelves, made out of 1.00mm thick stailness steel sheet of grade AI SI 304 including fixing arrangment complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc.complete all as specified and directed.

M&L for Brick work with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar including removing of rubish out side of MOD area complete all as specified and directed.

M&L for Baroda green marble 14 to 16 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. Note : cost of screed bed deemed included in quoted unit rates.

M&L for rounding to one edge of stone slabs as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, chajjas, staircases, landings and similar suspended work complete all as specifie and directed. Note :- Reinforcement shall be cut as required to facilitate demolition.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and as directed. NOTE: reinforcement to be measured and paid separately under respective item here-in-after.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of cement concrete of any description and in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-1 (using 20 mm graded graded stone aggregate) in plinth protection/ sub base , finished suface even and smooth with using extra cement complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm for laying of cable and foundation of poles stays and getting out in any type of soil all as specified.

Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all as directed.

Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed by Engineer-in-Charge

Taking down water mains/ sewage pipe on any discription, dia of pipe n,exc 300mm and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed.

Supply, laying, jointing and testing in trenches DWCPE pipe (SN 8) of nominal size 163 (ID)/180 (OD) dia as per IS-16098 (Part-2): 2013 upto a depth of 1.65 m required to make sewer line functional complete all as specified and as directed. Note:- Excavation and earthwork incl returning filling shall be measured and paid seperately under respective itemof BoQ.

M&L for exterior out door / parking tiles/Endura tiles of size 400 x 400 mm x 10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and incl 15 mm thick screed bed or bedding layer in cement mortar (1:6) Complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring for one light point/ fan point/ exhaust fan point controlled by one switch with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed conduit, including non metallic PVC conduit of apropriate size (not less than 20 mm dia) with all accessories, fitting and fixtures, factory made ressessed terminal boxes of reqd size (made of pressed steel sheet not less than 1.6 mm thick) duly painted with two coats of block bituminous paint over a coat of red oxide primer (both side), top cover made of 6 mm thick Phenolic laminated sheet, earthing cable of same discription to common earth drawn in same conduit connected to earth dolly and making good disturbed surfaces and finished to match with existing complete all as specified and directed.

All as per item No 123 above but for One 2-way light point controlled by 2x two way 5 Amps switch.

All as per item No 123 above but for One bell point controlled by one 5 Amps bell switch.

All as per item No 123 above but for One 5 amp socket outlet point on same board 2.5 sqmm (nominal area) cable.

All as per item No 123 above but for One 5/15/16 Amp socket outlet on Independant board with 2.5 sqmm (nominal area) cable.

All as per item No. 122 above but for One 15/16 Amp socket outlet on Independant board with 4.0Sqmm (nominal area) cable (geyser Point).

S&F switch piano, flush butten, single pole one way 5 Amps 240 Volt complete all as specified and directed.

S&F switch piano, flush butten, single pole two way 5 Amps 240 Volt complete all as specified and directed.

S&F bell switch, piano type single pole one way 5 Amp complete all as specified and directed

S&F socket 5 amps 5 pin, socket outlet, flush type , 230 volts complete all as specified and directed

S&F switch piano fiush button single pole one way 15 Amp 240 volt complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp , flush type , 230 volts complete all as specified and directed

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F fan regulator, flush type120 watt single phase complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

S&F lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/ angular/pendent holder fittings including9Watt LED lamp/bulb complete all as specified and directed

S&F LED tube light fittings,18/20 watt fixed on wall with rawl/plug , including making connection from connector to ceiling rose with and including 23/0 0076 flexible copper wire three core of required length complete all as specified and directed.

S&F LED bulk head light fitting, 9/10Watt, including LED lamp and making connection complete all as specified and directed.

S&F wall bracket light fancy type suitable for B-22 base holder including 10W LED bulb complete all as specified and directed.

S&F LED Mirror light fitting with lamp,1 x 10Watt, 2 feet long, 6000K, Decorative Indirect up-down light for mirror and as wall light application,made of extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection from ceiling rose to connector with and including three core flexible copper cable of size 23/0.0076 of required length complete all as specified and directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along (including MCB/MCCB/Isolator etc) with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, siingle pole and neutral 8 way 240 Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F miniature circuit breaker (MCB) Single Pole, 6 to 32 Amps 240 volts, 10KA 'C' Curve complete all as specified and directed.

S&F miniature circuit breaker (MCB) SPN, 6 to 32 Amps 240 volts, 10KA 'C' Curve complete all as specified and directed.

Taking down existing Ceiling fan/Exhaust fans with frame and mosquito mesh net including disconnecting all electrical connection, dismantling blades and depositing to store complete all as specified and directed. (NOTE: Existing fans shall be deposited by the contractor in AGE E/M store Yard at Old Cantt Pryagraj.)

S&F ceiling fan with Brush Less Direct Current (BLDC) Motor,ingle phase AC,230 V, 50 Hz, 1200 mm sweep, BEE 5 star rated, class of insulation: B, copper winding, with remote or electronic regulator unit for speed control, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope and all remaining accessories like safety pin, nut bolts, washers etc, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, complete all as specified and directed.

S&F of new exhaust fan, matel body, heavy duty, 300 mm sweep ,single phase 240 volt including making electrical connection from connector to ceiling rose with and including 3 core 23/0.0076 size flaxible copper cable, marking MES No wirh paint complete all as specified and directed.

S&F electric water heater(Geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories complete all as specified and directed. Note: The contractor shall deposite the existing geyser if any to store yard of AGE (E&M) Old Cantt Prayagraj.

Taking down existing street light/ road light/ building light/ flood light from pole/ wall at any height and location iincluding brecket complete all as specified and directed.

S&F road lighting luminaire with LED lamp and all accessories, 35 Watt, unique peanut optics to ensure uniform distribution, higher spacing between poles, maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance fixed on pole/wall with bracket, connecting to existing junction box with and including three core flexible copper wire of size 23/0.0076 complete all as specified and directed.

Taking down existing submain wiring of any discription, in any location complete all as specified and directed.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run as continuous earth wire of similar description, drawn in and including 20mm dia 'medium grade' PVC concealed conduits (with fittings) incl taking down the old unserviceable wiring complete all as specified and directed. NOTE: Two run of main wire and one run of earth wire with conduit shall measured as One unit length.

Taking down existing UG cable of any discription, in any location complete all as specified and directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.

M&L for Supply,laying, jointing & testing of 25 Sqmm, 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ.

M & L for sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. Note: Punned thickness of sand shall be measured.

Supply and laying dry well burnt locally available brick sub class 'B' old size bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.

S&F 50mm dia galvanised steel tubing light grade with all necessary fittings laid in trenches, fixed to walls, poles, under road/floor etc for cable protection, complete all as specified and directed.

M&L for earthing complete with steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron, steel earthwire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made from PCC (1:2:4) type B-1(using 20mm graded stone aggregates) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in loose/ soft soil, ( excavation, returning filling in and removal of surplus soil to a distance not exceeding 50 metres), all as per electrical plate No.5 of SSR Part-I connected to earth test point all as specified or indicated including testing on complete all as specified and directed.

Please Enable Macros to View BoQ information