Electrical Works in staff Qtr and TE Compound at 2 Block RAJAJINAGAR Bengaluru

Amount

Supplying and Laying of following size PVC insulated PVC sheathed XLPE Aluminium conductor UG Cable of 1.1 KV grade on surface of wall / pole / in ground i/c necessary testing & commissioning etc., complete as reqd., [M/s Polycab / SS / BSNL approved make] a) 4C X 25Sqmm

b) 2C X 6Sqmm

Supplying and making end termination with brass compression gland suitable for following size PVC sheathed / XLPE al. UG Cable of 1.1 KV grade and al. lugs etc., complete as reqd. a) 4C X 25Sqmm

2C X 6Sqmm

Supplying and laying 40mm dia. 'A' Class G.I. pipe for CC road/ on surface of wall with clamps and painting the same etc., as required.(Make: Any ISI marked)

Supplying and laying 40 mm dia HDPE pipe for cable protection on surface of wall with clamps and painting the same etc., as required.(Make: Any ISI marked)

SITC of 30Watt LED type Street light fitting suitable for operation on 230V, 50Hz, AC supply on surface of wall / on the existing GI pipe bracket / pole i/c making necessary interconnections, testing / commissioning etc complete as reqd. [Make: M/s Havells, Model : 30 W LED 6500 K HEXAYP7PN6K030 9405 / SS BSNL approved make]

Supplying and fixing of 32mm dia x 5feet GI bend pipe suitably bent to fix the existing LED street light fittings on surface of wall / existing pole with necessary clamps, accessories etc., complete as reqd.

Supplying and fixing Weather proof / shock proof SMC box of size 150mm x 150mm x 100 mm with No. 1 No. 16A porcellain fuse cut out & 16A, 4 way connector block suitable size clamps to mount on the wall / existing compound light poles i/c necessary inter connections, testing, commissioning etc., complete as reqd. [Make: M/s Syntax, or superior make]

Supplying and Laying of 3 core 2.5 Sqmm Aluminium BTC cable in existing surface/ recessed steel conduit/PVC conduit/Trunk box/panel street light bracket/pole including connections etc as reqd.

S&D of 2 x 16 Sqmm wire sizes FRLS PVC insulated copper conductor single core cable in existing surface/ recessed steel conduit/PVC conduit/Trunk box/panel including connections etc as reqd.[M/s Polycab / SS / BSNL approved make]

Supplying and fixing of 25mm dia PVC pipe along with accessories on surface of wall etc., complete as reqd.

Replacing following faulty/ Burnt electrical items suitable for operation of 230V 50HZ AC supply i/c making necessary interconnections, testing, commissioning etc. as reqd. [M/s L&T or ss make] a) Pot Head 4core25sqmm Cable on Bescom Pole

b) 100A Aerial Fuse Cutout- 3Nos & 1No neutral link with DMC/FRP Sheet & suitable clamp [Bescom approved make]

c) 19/25MM PVC alkethene sleeve

d) 4x 25 Sqmm PVC insulated AL weather proof wire

e) 32 mm PVC Pipe in Bescom Pole

f) 6/10 A SP MCB

Rectification of faulty meter board removing of Bescom Meter and fixing in the same, Distribution panel board including removing & re-termination of burnt out terminals, replacing of burnt out 4x10 Sqmm copper wire approx. length 3Mtrs & 16 no copper lugs, tightening of bus bar, arranging power shut down and restoring of power supply etc., as reqd.

Cutting the existing cement concrete 0.15Mtrs x 0.20Mtr digging by using compressor hammer drill machine / manual digging, cleaning the debris from site etc., and refilling of the same in the proportion of 1:3:6 RCC concrete neat finishing, making good the damages etc., complete as reqd.

S&F of 15watts LED Bulb/Light suitable for 230V, 50Hz, AC supply, modification to bracket on existing street light pole by using suitable size MS flat/pipe for fixing the holder, necessary hardware, testing, commissioning etc., as required.

Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7mtr long with charcoal/ coke and salt etc. as required (Body-2No & Neutral Earthing-2 No).

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required.

Providing and fixing 25 mm X 5 mm G.I strip on surface or in recess for connections etc., as required.

Supplying and fixing, 300 mm X 300 mm X 100 mm powder coated ms box with suitable length 25mm x 5mm, 4 strip copper bus bar box along with accessories on surface of wall i/c necessary painting etc., complete as reqd.

AGNES ELECTRICALS