Carrying out the improvement works to the AEE O M Peelamedu office building at Peelamedu 110 11 KV SS Premises Coimbatore

Dismantling ,Clearing away the from the site of the exisiting pressed tiles and weathering course as per the direction of site engineer including labour, lead, lift, etc., complete

Dismantling the existing damaged PCC and clearing away from the site including cost of labour charges, lead, lift, etc., complete.

Chipping the existing concrete/plastering and clearing away from the site including cost of labour charges, lead, lift, etc., complete.

Providing PCC 1:2:4 mix using 6 mm and 10 mm HBG metal of a average thickness of 0.075 m with water proofing compound over the RCC roof top and finishing the top with power trolling including cost of all materials, labour, curing, finishing with proper slope, lead,lift, etc., complete as per the direction of site incharge

Old Terrace Screed Repair with UV Resistant Waterproof coating below 500 Sq.m - Providing and Applying high perfomance solar reflective & Acrylate silicon based Waterproofing coating which is single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof screed surface applied @ 1.5 l/m2 in 3 coats to achieve 1mm DFT, having tensile strength 2N/ mm2 confirming to ASTM D 412; Elongation at break ≥ 200%, Abrasion resistance 21mg confirming to ASTM D 4060 and Crack bridging ability up to 2 mm, including surface preparation, priming the surface with 1 coat diluted with water in the ratio 2:1 spreading @ 0.125 L/m2 as self-priming coat in the SSD condition and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification.

Providing PCC 1:3:6 mix using 6 to 10mm HBG metal including cost of all materials,pointing, labour, curing, finishing with proper slope, lead,lift, etc., complete as per the direction of site incharge.

Brick work in CM 1:5 using II class chamber burnt bricks for walls including cost of all materials, curing,labour, lead, lift, etc. complete.

Plastering with CM 1:5, 12mm thick including cost of all materials, labour, curing, lead, lift, etc. complete.

Plastering with cm 1:3, 12mm thick for ceiling, beams, sunshade including cost of cement, all materials,curing, labour, lead, lift, etc., complete.

Supplying and laying of Vitrified floor tiles for of size 600 x 600 x 8 mm double charged for office room of approved quality and colour laid in CM. 1:3 , 20 mm thick and pointing with white cement using 0.40 Kg/m2 including finishing joint and pointing Flush with tiles surface including cost of cement, all materials, labour ,curing, leads and lifts etc., complete.

White washing two coats using white cement for ceiling surfaces including cost of all materials, labour, lead, lift,Scaffolding, T&P, etc. complete.

Painting two coats with interior emulsion of approved quality and colour over a priming coat for inside wall surfaces including cost of all materials, labour, lead, lift, T&P, etc. complete.

Painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc, complete in all floors complying with standard specifications and as directed by the departmental officers.

Enamel Painting with two coats for old wood works of approved colour over a primer coat including cost of all materials, labour, scrapping with sand paper, lead,lift, etc., complete.

Painting two coats with enamel paint of approved quality for old iron work and primary coat including cost of all materials, labour, lead, lift etc., complete

Providing Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter a Solid panel PVC door with frame.

Supplying and fixing of suitable MS sections to the required length for supporting the MS Staircase and MS Landing, including fabrication, labour for fixing in correct position,cutting and Enamel Painting, etc., complete as per the direction of Engineer incharge of work

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 12.5 litres capacity PVC low level flushing tank with a pair of CI brackets, etc.,complete with all fittings

Suppplying fixing Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling,Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe 15mm dia GM Wheel Valve, 15mm dia Nylon Connection,15mm dia Brass Nipples, 15mm CP Pillar Tap etc, with all accessories, including cost of all materials, labour, lead, lift, etc., complete.

Supplying, laying and jointing 110mm dia PVC pipes (having working pressure 6 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall Internal water supply above ground level.

Supplying, laying and jointing 50mm dia PVC pipes (having working pressure 6 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall Internal water supply above ground level.

Supplying, laying and jointing UPVC 40 mm dia pipes of Class 5 (having working pressure of 10 kg/ sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting, and fixing UPVC specials using UPVC adhesives. including cost of all materials, labour, etc., complete.

Supplying, laying and jointing UPVC 25 mm dia pipes of Class 5 (having working pressure of 10 kg/ sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting, and fixing UPVC specials using UPVC adhesives. including cost of all materials, labour, etc., complete.

Supplying and fixing in position of 25mm dia gun metal gate valve of approved make of best quality including cost of materials, labour, lead, lift, etc., complete

Supplying and fixing in position of 40mm dia gun metal gate valve of approved make of best quality including cost of materials, labour, lead, lift, etc., complete

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 5.5mm thick mirror of following size , Shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification.Size :600 x 450 mm

Supplying and fixing Chromium plated Angle tap 15mm dia approved ISI make, including cost of all materials, labour, etc., complete.

Supplying fixing CP Two way Bib cock with Health faucet approved ISI make, including cost of all materials, labour, etc., complete.

SS Heavy duty Long body tap 15mm approved ISI make including cost of all materials, labour, etc., complete

Supplying and laying of Non - slippery type Design ceramic floor tiles of 305x305x6 mm for bath of approved size, quality and colour laid in CM. 1:3, 20 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing Flush with tiles surface including cost of cement, all materials, labour, curing, lead, lift etc., complete

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

Please Enable Macros to View BoQ information