Power supply arrangement at newly made check post in transporting road for Dewalgadda village bypass near Birsamunda chowk Dewalgadda by extension of overhead line from Weighbridge number -5 under Magadh OCP,M-S Area

Amount

Erection of metallic pole of length above 10mtr and upto 12 mtr in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above Including binding etc. as required for Tensioning of Conductor where required.during changing of damaged insulators or changing of cross arms

Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 4 wire system.

Supplying of channel iron 75 mm X 40 mm x 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 2 wire system.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G: I. Bolt, nuts and straps etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Providing of 25 sq mm 4 core isi marked, upto 1.1 kv grade Alluminium armouredcable for laying service wire

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of size not exceeding 35 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. As required

Providing of Onload Manual switch disconnector changer with sheet steel enclosure Type, 100 Amp

Providing and fixing 100 A rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way, Double door

Erection of cradle guard as required.

Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Fixing Charge of supplied items including end termination no 12 at 15% of item cost

Total impact of GST for the purpose of CTC