8304 SPECIAL REPAIR TO BLDG NO P-167 (RATION STORE COMPLEX) AT AFMC PUNE UNDER GE (CENTRAL) PUNE

Amount

Dismantling floor,hearth or wall tiling incl cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, Apron etc.

M&L for 40mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete

M&L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete

M&L machine cut Kota stone 18 to 20 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in treads etc including rubbing and mirror polishing laid over and including screed bed 20mm thick in CM 1:4 including 2mmx2mm grooves-02 Nos and rounding to exposed face complete all as specified and directed.

M&L machine cut Kota stone 16 to 18 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in risers & skirting etc including rubbing and mirror polishing laid over and including backing coat 10mm thick in CM 1:3 complete all as specified and directed.

Material and labour for Chequered cement concrete tiles 25Cm x 25 Cm x 25mm thick laid over and including 15mm thick screed bed in CM 1:6, set, jointed with grey cement and pigments and pointed in neat cement slurry in floors complete as directed and specified.

M&L for darkshed glossy finish coloured, polished vitrified tiles 9 to 10 mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in flooring, set and jointed in neat cement slurrry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:6).

M&L for darkshed glossy finish coloured, polished vitrified tiles 9 to 10 mm thick area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in skirting, set and jointed in neat cement slurrry and 10mm thick backing coat in CM (1:4) including tringular filletting in CM 1:4 on top of tiles.

M & L for 400x400mmx6 to 7mm thick, non skid ceramic coloured tiles in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:4) etc complete all as specified and directed by Engineer-in-Charge.

M&L for 300x600x6 to 7mm thick, coloured, glazed ceramic tiles as in skirting/Dado, laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in CM 1:4 including triangular filleting on top wherever required in CM 1:3 complete all as specified and directed by Engr-in-Charge.

Demolition of brick/precast block walling built in cement mortar complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15mm thick in CM (1:4) on fair faces of PCC block/brick walling, using water proofing compound @ 3% by weight of cement surface finished with sponge finish complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed. Make: Pidilite, Fosroc or equivalent

M&L rendering 10mm thick in CM 1:6, on brick/ PCC block walling, finished even & smooth with a thin layer of sagol finish.

M&L rendering 10mm thick in CM 1:3, in ceiling, finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plaster surface and applying three coats of white wash on wall complete all as specified and directed.

M&L preparation of newly plastered surface and using sand paper to have even and smooth surface and applying two coats of weather coat paint (Weather coat Exterior emulsion ) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge.

M&L for preparation of newly plaster surface and applying three coats of white wash of ceiling wall complete all as specified and directed.

M&L preparation of old surface of wall and applying two coats of oil bound distemper over a coat of suitable primer applying white putty on wall surfaces complete all as specified and directed.

M&L for complete removal or existing treatment and preparation of old decorated surfaces and applying two coats of weather coat paint (Weather coat Exterior emulsion ) manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge.

M&L for preparation of old surface of wall and applying two coat of white wash complete all as specified and directed.

M&L for preparation of old painted surface of ceiling and applying two coat of white wash complete all as specified and directed.

Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm (without taking off shutters from the frames).

Supply & fixing in repair steel windows with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars dovetailed or welded all as specified.

Supply & fixing in repair steel windows with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete without glazing bars dovetailed or welded all as specified.

S & F 125 x 60mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. with one shop coat of red oxide primer complete all as specified.

M&L Plain Cement Concrete type B0, 1:2:4 (using 12.5 mm graded granite stone aggregate) cast in situ for filling the pressed steel frames and similar works complete all as specified and as directed

S & F IInd class hard wood 40mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail and stile as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated.

Material and labour preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer.

M & L Preparartion of newly wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

M & L Preparartion of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint for changing to tint complete all as specified and as directed

M&L preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

M&L in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 176 of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.

M & L for 75mm thick cement concrete type C – 2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc all as specified and directed complete

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F in repair 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long.

S&F butt hinges 100mm size stainless steel medium weight all as specified.

S&F aluminium handles, anodised, cast type, of size 150 mm

Demolition of RCC (reinforcement cut as required to facilitate demolition) complete as directed.

M&L, RCC nominal mix type B1 (1:2:4) using 20mm graded stone aggregate as in lintel, roof beam,chajjas, band, cover slabs etc. complete all as specified and directed.

Use and waste of form work to sides and soffits of roof beam/Lintel beam, chajjas etc rough finished surface of concrete.

S&F MS TMT bars upto 10mm dia cut to length, bent to shape required including cranking, bending , binding, hooking ends abd binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

M&L for PCC 1:2:4 type B-2, (using 20mm graded stone aggregate) as in coping, levelling concrete, surface channels and drains incl all moulds and forms all as spd and directed.

S&F in repair MS window handle 125mm with nut or bolt to steel windows fixed at any height (i.e. upto three storey) complete

Supply and fixed in repair box type window hinges for steel window in lieu of broken projected type hinges or any type by welding of suitable size at site at any height (i.e. three storeyed) complete as directed by Engineer-in-charge

M&L for grinding, rubbing and Polishing to existing kota stone flooring/ terrazo tile/ terrazo cast in situ incld filling of joints where required upto entire satisfaction of Engineer-in-Charge and complete as directed

S&F MS framed work as in doors or gates of angle or other section with gusset plates,rails,braces,etc complete drilled for fixing of steel sheeting of other covering doors,etc to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging also fastening and fixing complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal', white , including fixing bolts etc including PVC seat cover white with flat bottom including CP or aluminium anodised hinges devices etc complete all as specified and directed.

S & F in repairs fancy type hand shower (Health Faucet) (ABS body) with 1.2 Mtr long Flexible tube and wall hook for iron pipe 15 mm bore or brass ferrule complete all as specified and directed at site.

S&F in repair fancy type pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed completed all as specified and as directed.

S&F in repair PVC connection 15mm dia and 600 mm long

S&F in repair Stop valves, 15 mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F in repair 15mm chromium plated cast copper alloy bib taps (fancy type) complete all as specified and as directed

S&F in repair angle cock 15mm bore CP complete all as specified and directed.

S&F in repair vitreous china flat back type wash basin, white of size 550 x 400 mm including brackets, chromium plated waste coupling and waste pipe complete

S & fixing in repair syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets,32mm flush pipe etc, complete all as specified.

Supply and Fix in repairs Stainless steel grating dome 125mm dia with or without waste holes as required.

Taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified and directed of following sizes :-

(a) 15mm bore

(b) 20mm bore

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) incld cutting chases, pinning in brick/concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 complete all as specified and as directed of the following sizes

(a) 15mm bore

(b) 20mm bore

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc incld cutting chases, pinning in brick/concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 complete all as specified and directed of the following sizes :-

(a) 15mm bore

(b) 20mm bore

S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor/wall complete all as specified & directed of following sizes :-

(a) 110mm bore

(b) 75mm bore

S&F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

Agarwal Agencies

PRASHANT CONSTRUCTION

SBS Enterprises