Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.9 LAccepted-AOC HIMACHAL PRADESH HP | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹17.8 L+₹3.5 L (24.2%)Rejected-AOC | L2 | Rejected-AOC BEING NOT LOWEST | |
| 3 | L3₹18.2 L+₹3.9 L (27.5%)Rejected-AOC | L3 | Rejected-AOC BEING NOT LOWEST | |
| 4 | L4₹19.7 L+₹5.5 L (38.2%)Rejected-AOC | L4 | Rejected-AOC BEING NOT LOWEST | |
| 5 | L5₹22.5 L+₹8.2 L (57.2%)Rejected-AOC | L5 | Rejected-AOC BEING NOT LOWEST |
Tender Value
₹25.7 L
EMD Value
₹51,400
Closing Date
9 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 863 EWS
GE 863 EWS C/O 56 APO
SPL REPAIR OF T50 T44 OF 104 I FD WKSP COY EME AT POOH SPL REPAIR TO BLDG NO T153 OR LIVING AT LOWER VALLEY AND T09 OR LIVING AT UPPER VALLEY OF 17 JAT IN THE AREA OF AGE BRI POOH UNDER GE 863 EWS
2023_MES_594877_1
GE863/EWS-T-24 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Pooh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 863 EWS
₹51,400
Yes
20 Jul 2023
12 May 2023
12 Jun 2023
12 May 2023
9 Jun 2023
26 May 2023
Amount
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets, complete, all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in framed work or Framed work,complete, all as specified and directed .
Dismantling timber scantlings under 40 sq.cm in section, in any positions as in framed work but in fillets, rails, posts, rafters, purlins, etc, complete, all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete, all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) , complete, all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete, all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete, all as specified and directed.
Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames) and remove from site , complete, all as specified and directed.
Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames) and remove from site , complete, all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.
M & L for second class hardwood clean sawn scantlings as in timber framed and fixed, complete, all as specified and directed.
M & L for second class hardwood clean sawn scantlings as in timber framed and fixed, but except timber, complete all as specified and directed
M & L for 6mm thick (No of ply 5) plywood, grade BWR, type BB, fixed with nails to timber frame work, as in ceiling etc, complete, all as specified and directed.
M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3 & n.exc 6 sq.cm complete all as specified and directed.
M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 Sq.cm but n.exc 25 Sq.cm complete all as specified and directed.
M & L for pre-cast cement concrete type, C1 (1:3:6) using 20mm well graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:6), complete, all as specified and directed.
M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete, all as specified and directed.
M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but EXCEPT STONE, complete, all as specified and directed.(Stone shall be used as obtained fromsrl item No 04 here in before )
M & L for providing precast cement concrete Type C1 (1:3:6) using 20mm well graded stone aggregate and set in cement mortar (1:6) as in bond stone, complete, all as specified and directed.
M & L for providing Plain cement concrete, type C1 (1:3:6) using 20mm well graded stone aggregate as in coping, complete, all as specified and directed.
M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:6), complete, all as specified and directed.
M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar (1:4) on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles, complete all as specified and directed.
M&L Machine cut kota stone slab flooring 18mm to 20 mm thick laid over and including 20 mm thick cement screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified and directed.
M & L Machine cut Kota stone slab18mm to 20 mm thick ,in riser of steps, skirting, dado and pillar laid over 10 mm thick cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified and directed.
M & L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm/ 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over 20mm thick screed bed in cement mortar (1:4) as in floors with grey cement and pigment , complete all as specified and directed.
M & L for providing Plain cement concrete, type C1 (1:3:6) using 20mm well graded aggregate as in roof kerb or mud stops, round on edges, complete, all as specified and directed.
S&F of 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, over and including 20 mm thick screed bed or bedding layer of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm well graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and fair without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.
M & L for RCC 1:2:4 type B-1 ( 20 mm well graded stone aggregate ) as in chajjas, complete, all as specified and directed
M & L for RCC 1:2:4 type B-1 ( 20 mm well graded stone aggregate ) as in Beams , cantilevers, bressummers, lintels etc, complete, all as specified and directed
M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete, complete, all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete, complete, all as specified and directed.
S & F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and directed.
M & L for mild steel TMT bars upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed.
S & F of 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap using grade of zinc coating -275. inclusive of both sides, fixed with ‘L’ or ‘J’ type hooks or cranked hook / bolts and washers as in roof covering etc, complete, all as specified and directed.
M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster (1:4) using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement), complete, all as specified and directed.
Supply only integral water proofing compound of approved brand/make, complete, all as specified and directed.
M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement plaster (1:6) and finished even and smooth (without using extra cement), complete, all as specified and directed.
M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar (1:4), complete, all as specified and directed.
S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint, complete, all as specified and directed.
S & F second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats, complete, all as specified and directed.
S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009), complete, all as specified and directed.
S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009), complete, all as specified and directed.
M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane, complete, all as specified and directed.
M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square exc 0.5 sqm in each pane, complete, all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete, all as specified and directed.
S & F clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165, complete, all as specified and directed.
M & L for providing Plain cement concrete type C1 (1:3:6) using 20mm well graded stone aggregate as in hold fast blocks, complete, all as specified and directed.
S & F 125 mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.
S & F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.
S & F 300mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedS & F 125mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.
S & F 150 mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed.
S & F 100 mm Aluminium handles, cast type, anodised of extruded section, complete, all as specified and directed. complete all as specified and directed.
S & F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed, complete, all as specified and directed.
S & F 125mm aluminium, anodised, barrel tower bolts of extruded section and fixed, complete, all as specified and directed.
S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed.
M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint as in treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each, complete, all as specified and directed.
M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint as in treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m, complete, all as specified and directed.
S&F for IInd Class hard wood of Small fittings such as brackets of any type, latch and hing blocks, shaped door & window stops & the like, including all necessary labours; articles n exc 200 cu.cm each, complete, all as specified and directed.
M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete, all as specified and directed.
M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of alkali resistant primer, complete, all as specified and directed.
M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash, complete, all as specified and directed.
M & L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil, complete, all as specified and directed.
M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer, complete, all as specified and directed.
M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality), complete, all as specified and directed .
M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete, all as specified and directed
M & L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint), complete, all as specified and directed.
S & F in repair 20 mm dia., Aluminium alloy anodised curtain rails with brackets fixed, complete, all as specified and directed.
M & L for 75 mm thick Plain Cement concrete type C2, (1:3:6) using 40 mm well graded stone aggregate in sub base of flooring/ hard standing /footpath, complete, all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B0 using 12.50mm well graded stone aggregate as in floor, including rough finished with out using extra cement, complete, all as specified and directed.
S & F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, complete, all as specified and directed.
S & F in repairs bib taps, 15 mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.
S & F in repairs 15 mm dia stop valves fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed.
Supply and fixed (in repair) PVC connections 45 cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete all as specified and directed.
Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces, complete, all as specified and directed.
Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface, complete, all as specified and directed.
Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board, complete, all as specified and directed.
M&L for point wiring using approved colour coding as per IS with using approved colour coding as per IS 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC Casing and caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch, complete, all as specified and directed.
All as per Srl item No 79 here-in-before but controlled with one socket outlet 5 Amp on same board with other switches with cables 1.5 Sqmm, complete, all as per specified and directed.
All as per Srl item No 79 here-in-before but controlled with one socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm, complete, all as per specified and directed.
All as per Srl item No 79 here-in-before but controlled with one multipin socket outlet 15 Amp, independent board with cable 2.5 sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor, complete, all as per specified and directed.
Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way, complete, all as specified and directed.
Supply and fixing of socket outlet multipin 15 Amp, 2-in-one 230 Volts, flush type, complete, all as specified and directed.
Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type, complete, all as specified and directed.
Supply and fixing of switch piano type 5 Amps, 230 Volt, flush button single pole one way, complete, all as specified and directed.
M&L Ceiling rose, 3 terminal with ISI mark, complete, all as specified and directed.
Supply and fixing surface & wall mounted LED 20W tube light fitting 4 feet with high quality material and design, extruded aluminium housing enhances safety. High quality PC diffuser, reliable and robust housing structure, maximize the endurance over the life time slim integrated design, easy to install, efficacy 125 limen/ watt all accessories, complete, as specified and directed. Make: Crompton Cat No. CCS-100-20-65-HL2-DP-NWH or equivalent of Wipro/Philips/Havells/Bajaj.
Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings, complete, all as specified and directed. Make : Anchor/leader/havells
Supply and fixing LED lamp 9W energy saving upto 80%, BEE rated with all accessories, complete, all as specified and directed. Make:Cromptom part No-LED 9DFCDL-PRO-BO/ LED 9W-B22/E27-CDL/WW or equivalent in Philips/wipro/Havells / Bajaj.
Supply & Fixing bulk head light with 10 Watt, LED Lamp complete,all as specified and directed. Make Crompton Cat No LBHP-10-CDL or equivalent in Philips/wipro/Havells/ Bajaj.
Supply and fixing, MCBs Distribution board , sheet metal enclosure, SPN 240 Volts , 08 ways with 200 amps rated bus bar , double door for MCBs, ,with IP 43 protection ,complete all as specified and directed.
S&F MCBs, SPN, 40 Amp,10 KA, complete, all as specified and directed.
S&F MCBs, SP 6 Amp to 32 Amp, 10 KA, complete, all as specified and directed.
Material & labour in replacement earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr depth below ground level at any type of strata) as with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. Connected with galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers as earth lead including concrete chamber of PCC 1:3:6 type C1 (using 20mm graded stone aggregate) with fair finish, internal surface of concrete chamber shall be given internal dia 300mmx300mm, 15mm thick plaster in CM 1:4) funnel with wire mesh, RCC pit cover of 320x320x80mm size in (1:2:4) Type B1 (using 20mm graded stone aggregate ) reinforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1 (2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm bore dia light grade GI pipe for protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing wire to panel, including testing on completion complete all as specified and directed. Note : (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick reinforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.
Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 6 Sqmm, complete, all as specified and directed.
Supply and fixing in replacment recessed mounted/ ceiling downlight 36w with pressure die-cost aluminium housing for effective thermal management, high transmission factor PMMA diffuser for better performance and suitable driver, , complete, all as specified and directed. Make: Crompton. Cat No. LCTLRF7-36-WW or Havells - Cat No TRATO2X2PLR36WLED 857MOD (Warm White) or Wipro - Cat No (Warm White) No.CRCO10R036HP57TLG2
Supply and fixing surface & wall mounted LED 20W tube light fitting batten 4 feet, mirrorlite slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories, complete, all as specified and directed.
Supply and fixing, MCBs Distribution board , sheet metal enclosure, SPN 240 Volts , 12 ways with 200 amps rated bus bar , double door for MCBs, ,with IP 43 protection ,complete all as specified and directed.
S&F MCBs, TPN 63-40 Amp,10 KA, complete, all as specified and directed.
Net Contract Sum will be after deducting Sch Of Credit of Rs. 37825.00
M/S PAWAN KUMAR NEGI GOVT. CONTRACTOR
H.S. Enterprises
M/S SANTOSH KUMAR
Kusan Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .