Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.5 LAccepted-AOC | ₹6.5 L Quoted ₹5.4 L | 1 | Accepted-AOC ok |
| 2 | 2₹5.5 LRejected-Finance | ₹5.5 L | 2 | Rejected-Finance not ok |
| Sl No | Description | Qty | Unit | V.ANBURAJA L2 | CREATIVE BUILDERS AND DECORS L1 |
|---|---|---|---|---|---|
| 1.00 | Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.
(a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.
The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. 500 Lit | 1 | No. | 2,30,000 ₹2.3 L | 2,26,200 ₹2.3 L |
| 2.00 | Supply and fixing of following L angle truss including cost of Material conveyance of all material, fabrication and fixing charges etc.Complete as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete as Directed by the Departmental Officer. | 350 | Kg | 120 ₹42,000 | 113 ₹39,550 |
| 3.00 | Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. | 41 | M2 | 1,120 ₹45,920 | 1,113 ₹45,633 |
| 4.00 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B | 1.04 | M3 | 199 ₹206.96 | 197 ₹204.88 |
| 5.00 | Brick Work in Cement Mortor 1:5 Mix (one cement, five M- Sand ) using new best country Bricks of size 8 ¾” x 4 ¼” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications. | 3.11 | M3 | 7,199 ₹22,388.89 | 7,191 ₹22,364.01 |
| 6.00 | Plastering in Cement Mortor 1:5 Mix (one cement, five M- Sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. | 13.5 | M2 | 295 ₹3,982.50 | 288 ₹3,888 |
| 7.00 | Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. | 1.58 | m3 | 5,825 ₹9,203.50 | 5,815 ₹9,187.70 |
| 8.00 | Conduction geophysical survey quality and quantity test an transportation charges etc., (Rate as adopted by TWAD board) | 1 | no | 2,550 ₹2,550 | 2,500 ₹2,500 |
| 9.00 | Drilling of borewells of size 6" to 8" dia. in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples as directed by the Department Officers. | 36 | no | 1,290 ₹46,440 | 1,282 ₹46,152 |
| 10.00Supply and Delivery of 150 mm dia PVC casing pipe as IS 12818/1992 Including cost and conveyance to the site etc. complete | |||||
Tender Value
₹6.5 L
EMD Value
₹6,500
Closing Date
18 Sept 2025, 3:00 pmClosed
Executive Officer
Nemili Town Panchayat office
Providing R.O Plant Athora street in Nemili Town panchayat
2025_DTP_604092_1
201/2025-2026
Open Tender
Civil Works
240 days
Nemili Town panchayat office
2 and above
2 documents required · 2 mandatory
₹0
₹6,500
Yes
19 Mar 2026
15 Sept 2025
18 Sept 2025
15 Sept 2025
18 Sept 2025
15 Sept 2025
15 Sept 2025 - 18 Sept 2025
Amount
Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. 500 Lit
Supply and fixing of following L angle truss including cost of Material conveyance of all material, fabrication and fixing charges etc.Complete as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete as Directed by the Departmental Officer.
Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B
Brick Work in Cement Mortor 1:5 Mix (one cement, five M- Sand ) using new best country Bricks of size 8 ¾” x 4 ¼” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.
Plastering in Cement Mortor 1:5 Mix (one cement, five M- Sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Conduction geophysical survey quality and quantity test an transportation charges etc., (Rate as adopted by TWAD board)
Drilling of borewells of size 6" to 8" dia. in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples as directed by the Department Officers.
Supply and Delivery of 150 mm dia PVC casing pipe as IS 12818/1992 Including cost and conveyance to the site etc. complete
With slotter
Without slotter
labour Charges for inserting 150mm dia OD P.V.C Casing Pipes Assembley (With Slot or With Out Sloter In the Drilled holes Including the jointing the Pipe With P,V,C Coupler with Cement pipes complete
Supply and delivery of Single Phase submersible pump set suitable 150mm dia Borewell with ISI mark IS 8034/2002 Without pannel board of 15x80 etc complete
Supply and delivery of Single phase pannel boardwith Star Delta suitable for 1.50 HP submersible motor with DOL with two level guard and auto start etc. complete
Supply and delivery of following HDPE/GI pipes and specials confirming to IS 554/86 GI pipes IS 1239/1990 part I required
UPVC 50mm
50mm GI Bend
50mmGI Flange set
50mm GI Elbow
50mm MS clamp set
50mm GM Non return valve
32 mm dia GI pipe
32 mmdia GI bend
2.50sqm 3 core flat copper submersible cable
150 mm dia Bore plate
HDPE Tank 1000 lit
Labour charges for the erection of 1.00HP submersible pump set in the deep bore well including fixing and jointing submersible cable with Proper clamps upt to the starter to required depth and also fixing of riser pipes, valves erection, erection of Panel board consisting of TPICN switches and laying & jointing the cables and twin earthing asper IE rules, etc complete.
Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
V.ANBURAJA (BID ID -1464247)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid