REPAIR / MAINT OF MISC E/M INSTALLATION WORKS OF DG SET, RENEWAL OF OLD EARTHING AND OTHER CONNECTED ITEMS UNDER GE (MCTE) MHOW

Amount

Maintenance and servicing to DG set once in a three month including attending faults on call basis for normal repairs including replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing of bearings of engine and alternator, checking of batteries, applying petroleum jelly to battery tereminals, adding distilled water checking the oil, coolent levels Auto Manual functions, contact points, timers of capacity 200 KVA DG set installed at 110 Single officers area Mhow complete all as specified and as directed by Engr- in- Charge.

Note:- (i) Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii) The work of maintenance shalll be carried out through respective authorized dealer/ Highly skill operator/ Mechanic and electrician whose certificate shall be produced to Engineer-in-charge. (iv) Proper record & test results of the same shall be maintained as directed. (v) Work shall be carried out at site at different location.

All as per item No.1 here-in-before but capacity 180 KVA DG set installed at MAP Kodariya.

All as per item No.1 here-in-before but capacity 160 KVA DG set installed at MAP Kodariya and HQ MCTE Mess.

All as per item No.1 here-in-before but capacity 125 KVA DG set installed at FCTS Mhow.

All as per item No.1 here-in-before but capacity 100 KVA DG set installed at HQ MCTE.

All as per item No.1 here-in-before but capacity 62.5 KVA DG set installed at MAP Kodariya.

All as per item No.1 here-in-before but capacity 30KVA DG set installed at WB-02, WB-27, GC Mess.

Supply only Diesel filter element with 'O' ring suitable for 160 KVA to 200 KVA DG set compete all as specified and as directed. Make : Cummins, Kirloskar, Greaves, Koel (As per DG Set Make)

Supply only Diesel filter element with 'O' ring suitable for125/100 KVA DG set compete all as specified and as directed. Make : Cummins, Kirloskar, Greaves, Koel (As per DG Set Make)

Supply only Diesel filter element with 'O' ring suitable for 62.5 KVA DG set compete all as specified and as directed. Make : Cummins, Kirloskar, Greaves, Koel (As per DG Set Make)

Supply only Diesel filter element with 'O' ring suitable for 30 KVA DG set compete all as specified and as directed. Make : Cummins, Kirloskar, Greaves, Koel (As per DG Set Make)

Supply only air filter element suitable for 180 to 200 KVA DG set compete all as specified and as directed. Make : (As per DG Set Make)

Supply only air filter element suitable for 160 KVA DG set compete all as specified and as directed. Make : (As per DG Set Make)

Supply only air filter element suitable for 125 KVA DG set compete all as specified and as directed. Make : (As per DG Set Make)

Supply only air filter element suitable for 100 KVA DG set compete all as specified and as directed. Make : (As per DG Set Make)

Supply only air filter element suitable for capacity 62.50/30 KVA DG set compete all as specified and as directed by Engr-in charge. Make : (As per DG Set Make)

Supply only Fan Belt complete suitable for 180 to 200 KVA DG set compete all as specified and as directed. Make : Fenner/ Dunlop.

Supply only Fan Belt complete suitable for 160 KVA DG set compete all as specified and as directed. Make : Fenner/ Dunlop.

Supply only Fan Belt complete suitable for 125 KVA DG set compete all as specified and as directed. Make : Fenner/ Dunlop.

Supply only Fan Belt complete suitable for 100 KVA DG set compete all as specified and as directed. Make : Fenner/ Dunlop.

Supply only Fan Belt complete suitable for capacity 62.50/30 KVA DG set compete all as specified and as directed by Engr-in charge. Make : Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for 180 to 200 KVA DG set compete all as specified and as directed. Make : Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for 160 KVA DG set compete all as specified and as directed. Make : Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for 125 KVA DG set compete all as specified and as directed. Make : Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for 100 KVA DG set compete all as specified and as directed. Make : Fenner/ Dunlop.

Supply only Belt for battery charging alternator complete suitable for capacity 62.50/30 KVA DG set compete all as specified and as directed by Engr-in charge. Make : Fenner/ Dunlop.

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 180 to 200 KVA DG set compete all as specified and as directed.

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 160 KVA DG set compete all as specified and as directed. Make : (As per DG Set Make)

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 125 KVA DG set compete all as specified and as directed. Make : (As per DG Set Make)

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for 100 KVA DG set compete all as specified and as directed. Make : (As per DG Set Make)

Supply only Rubber Hose pipe set for water circuit with clamps complete suitable for capacity 62.50/30 KVA DG set compete all as specified and as directed by Engr-in charge. Make : (As per DG Set Make)

Supply only Engine oil, multi grade premium Genuine oil 20W/ 40 as per manufacturer recommendations in DG sets complete all as specified and as directed. Make : Indian oil/ Hindustan Petrolium/ Castrol/ BPCL

Supply and applying Petrolium Jelly (01 Kg plastic sealed container) complete all as specified and as directed. Make : Indian oil/ Hindustan Petrolium/ Castrol/ BPCL

Supply and fill distilled water for topping up in lead acid batteries complete all as specified and as directed.

Supply and fill electrolyte of suitable specific gravity for lead acid batteries in sealed container complete all as specified and as directed.

M & L for Battery leads of PVC insulated, multistranded, copper conductor of size 70 sqmm of 1.25 mtr long ach duly fixed with brass clamps, copper lugs suitable for DG set batteries installed at different locations complete including removal of extg unserviceable one complete all as specified and as directed.

M & L for battery teriminal brass clamps including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge.

M & L for disconnecting all electrical connections from DG set charging alternator of any capacity from base plate by opening nuts & bolts keeping aside the alternator for inspection and taking out to the work shop for rewinding including testing & commissioning complete all as specified & directed.

Taking down turbo charger from engine of DG set of any capacity for servicing and replacement of turbo kit complete all as specified and directed

M & L for water temperature guage including sensor and cable complete as per sample including removal of extg unserviceable one complete all as specified and as directed.

M & L for dismantaling the radiator taking to work shop for overhauling & cleaning, de-scaling with acid, removal of leakage including soldering and welding, brazing as required and renewal of gaskets, nuts, bolts, mounting pads,drain out hoses pipe, clips, etc and refixing its original position for following capacities of DG set complete all as specified and directed

(a) 30 KVA DG set to 100 KVA DG set

(b) 125 KVA DG set to 160 KVA DG set

(c) 180 KVA DG set to 200 KVA DG set

M & L for repair and calibration of FIP and injectors from authorised dealer for petty repairs to make the FIP functional as per standard calibration procedure and norms including replacement of minor spares, gasket etc for smooth functioning of FIP and refixing its original position including testing at site for following capacities of DG set complete all as specified and as directed. Note :- A certificate to the effect that the calibration and repairs has been carried out by the authorised dealer shall be submitted by the contractor.

(a) 30 KVA DG set to 100 KVA DG set

(b) 125 KVA DG set to 160 KVA DG set

(c) 180 KVA DG set to 200 KVA DG set

M & L for Repair/ overhauling of self starting/ Exciter system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 24 volts with necessary connections including testing and commissioing complete all as specified and as directed.

M & L for Repair/ overhauling of self starting system of DG set including replacement of carbon brushes, bearings, bushes, rewinding of armature and field coil etc and varnishing of capacity 12 volts with necessary connections including testing and commissioing complete all as specified and as directed.

M & L for repairing of battery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator, diode plate, corbon brushes of capacity 24 volts including testing and commissioing complete all as specified and as directed.

M & L for repairing of battery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator, diode plate, corbon brushes of capacity 12 volts including testing and commissioing complete all as specified and as directed.

M & L for AVR (automatic voltage regulator) control unit assembly suitable for 30 KVA DG set to 160 KVA DG set including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge.

M & L for AVR (automatic voltage regulator) control unit assembly suitable for 180 KVA DG set to 200 KVA DG set including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge.

M & L for fuel steel braided pipe with benjo bolts and washers etc of length 30 cm long including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge.

M & L for fuel steel braided pipe with benjo bolts and washers etc of length 45 cm long including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge.

M & L for fuel steel braided pipe with benjo bolts and washers etc of length 60 cm long including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge.

M & L for canopy hinges for auqastic doors with suitable bolts and nuts of DG set including removal of extg unserviceable one compete all as specified and as directed by Engr-in charge.

M & L for Anti vibration pads with suitable bolts and washers including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge.

M & L for carrying our repairs to AMF panel/ Auto and Manual of up to 200 KVA DG set at various installation including study, tracing out circuit, testing, replacing all defective parts, rewinding existing power and control wiring with same cables including testing and commissioing complete all as specified and as directed. (Note:- Spares like Volt meter, CT, power contactor required for repair will be measured and paid under relevant items.

Supply only for digital type frequency meter 96 x 96mm flush/ square pattern including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge. Make : L&T/ AE or equivalent

Supply only for LED indicator lamps R, Y, B with holder 15mm screw type including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge. Make : Rishab/ L&T/ AE/ Legrand or equivalent

Supply only for CT cast resin type of ratio 400/5 Amps of suitable VA burden including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge. Make : AE/ L&T/ Nutech/ Amol

Supply only for CT cast resin type of ratio 200/5 Amps of suitable VA burden including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge. Make : AE/ L&T/ Nutech/ Amol

S & F for CT cast resin type of ratio 100/5 Amps of suitable VA burden including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge. Make : AE/ L&T/ Nutech/ Amol

S & F for Power Contactor 415 Volt, 50 Hz AC suitable for DG set control panel/ AMF panel for following capacity of DG set including removal of extg unserviceable one compete all as specified and as directed. Make : Simens/ L&T/ ABB/ C&S/ Schneider.

(a) 100 KVA DG set to 160 KVA DG set

(b) 180 KVA DG set to 200 KVA DG set

S & F for Time dealy relay suitable for 30 KVA DG set to 100 KVA DG set including removal of extg unserviceable one complete all as specified and as directed. Make : Simens/ L&T/ ABB/ C & S

S & F for Time dealy relay suitable for 125 KVA DG set to 200 KVA DG set including removal of extg unserviceable one complete all as specified and as directed. Make : Simens/ L&T/ ABB/ C & S

M & L for solinoid switch assembly 24 volts suitable up to 200 KVA DG set including removal of extg unserviceable one complete all as specified and as directed by Engr-in-Charge.

M & L for solinoid switch assembly 12 volts suitable up to 200 KVA DG set including removal of extg unserviceable one complete all as specified and as directed by Engr-in-Charge.

M & L for self starter assembly 12 volts complete suitable up to 200 KVA DG setincluding removal of extg unserviceable one complete all as specified and as directed. Make : Lucas/ TVS

M & L for self starter assembly 24 volts complete suitable up to 200 KVA DG set including removal of extg unserviceable one complete all as specified and as directed. Make : Lucas/ TVS

M & L for electronic speed control unit assembly 12 volts suitable up to 200 KVA DG set including removal of extg unserviceable one complete all as specified. Make : Lucas/ TVS

M & L for electronic speed control unit assembly 24 volts suitable up to 200 KVA DG set including removal of extg unserviceable one complete all as specified. Make : Lucas/ TVS

M & L for SMPS (system main power supply) type control unit assembly suitable for 12 volts battery charger for including removal of extg unserviceable one complete all as specified.

M & L for SMPS (system main power supply) type control unit assembly suitable for 24 volts battery charger for including removal of extg unserviceable one complete all as specified.

S & F for single phase preventer suitable for operation on 415 Volts 50 Hz AC supply including removal of extg unserviceable one complete all as specified and as directed by Engr-in charge. Make : L&T/ Minilec

S & F for battery low maintenance lead acid of capacity 12 volts 180 AH with initial charging including removal of extg unserviceable one, all as specified and as directed by Engr-in-Charge. Make : Exide/ AMCO/ Amaron

S & F battery low maintenance lead acid of capacity 12 volts 150 AH with initial charging including removal of extg unserviceable one all as specified and as directed by Engr-in charge. Make : Exide/ AMCO/ Amaron

M & L for welding MS pipe heavy duty 100mm dia suitable for exhaust manifold of DG set with necessary scraping cutting to size as required and painting with two coats silver paint over a coat of redoxide primer including removal of extg unserviceable one complete all as specified and as directed.

M & L for Engine complete overhauling of DG set capacity UP TO 200 KVA of Kirloskar/ Crompton Greaves makes by opening the top cover complete including dismantling the engine head, cylinder liner and piston assembly, crankshaft assembly, radiater fan belt and radiator fan, gear assembly complete removing of engine side for repair/ replacement of parts i.e gasket, washer, 'O' ring all types etc including grinding polishing of crank shaft, head repairing and overhauling valve seat cutting and replacing, valve tapping, head assemble and testing of DG set after necessary repair with and authorised dealer fix at site reassembling of DG set and testing on full load upto entire satisfaction of Engineer in Charge all as directed (Note :- Measure spare parts will be measured and paid seperately under relevent items)

(a) Supply only Piston assembly

(b) Supply only Piston ring set

(c) Supply only full engine gasket

(d) Supply only Main bearing set

(e) Supply only Main cylinder liner

(f) Supply only Main cylinder head copper sleeves

(g) Supply only Lock nut

(h) Supply only Big end bearing

(i) Supply only Timing Belt

(j) Supply only benjo bolt

(k) Supply only Timing belt tension adjuster

(l) Supply only inlet valve

(m) Supply only Exhaust Valve

(n) Supply only head gasket

(o) Supply only oil pump assembly

(p) Supply only Thrust washer

(q) Supply only Crank case gasket

(r) Supply only Head nozzle plug set

S & F for pressure gauge 0 to 7 Kg/ sqcm along with sensor and cables for DG set including removal of extg unserviceable one complete all specified and as directed.

S & F for microprocessor based multifunction controller suitable for DG sets operation of any capacity and showing the various parameters such as volt, ampere, frequency, RPM etc complete as per site requirment including removal of extg unserviceable one complete all specified and as directed.

S & F connecting and testing MCCB in existing DG set Panel of the following capacity, suitable for 415 volts, 50 Hz, with extended terminals type, inter locked to prevent opening when the Switch is in ON Position, connecting and testing complete including removal of exiting unsv all as specified and directed. Make : L&T/ ABB/ Siemens/ Schneider.

(a) 4 pole 200 Amps with thermal magnetic release breaking capacity 16 KA, Ics=100% Icu

(b) 4 pole 400 Amps with thermal magnetic release breaking capacity 25 KA, Ics=100% Icu

(f) 4 pole 630 Amps with thermal magnetic release breaking capacity 36 KA, Ics=100% Icu

S & F connecting and testing open execution on load change over in existing DG set Panel of the following capacity, suitable for 415 volts, 50 Hz, 630 Amp, 4 pole with extended terminals type, interlocked to prevent opening when the Switch is in ON Position, connecting and testing complete including removal of exiting unsv all as specified and directed. Make : ABB/ Siemens/ Schneider/ Legrand.

Supply and fill genuine coolant in 5 ltrs plastic sealed container for topping up in Radiator of DG set located at different locations as directed by Engr-in-Charge complete all as specified and as directed. Make : Cummins/ Volvoline

M&L for earthing complete with GI steel earth plate electrode 60cm x 60cm x 6.0mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI strip 32 x 6mm by means of nuts, bolts checks nuts and washers made of GI earth wire protected by GI pipe 40mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) pre-cast RCC (1:2:4) type-B-1, cover slab 30cm x 30cm x 10cm with one lifting handle made out of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate layers, including necessary excavation and earth work in any type of soil complete all as shown in electrical plate No.3 of MES schedule Part-I and testing after completion.

M & L for disconnecting all electrical connections from Coupling and flywheel DG set alternator of any capacity from base plate by opening nuts & bolts keeping aside the alternator for inspection and taking out to the work shop for rewinding including testing & commissioning complete all as specified & directed.

M&L for Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of size up to 200 KVA complete all as specified and as directed.

Ms Kailash Chandra Babulal

M/s Shree Ganesh Traders

sanjay traders

Vinayak Trading House

Archana Construction

SAHYOG ELECTRIC