CLEANING OF SEWAGE LINE, SOAKAGE WELLS, SEPTIC TANKS, MANHOLES AND WATER TANKS AT INF BDE OTM IN ZONE-III UNDER GE (S) JAIPUR AT MIL STN JAIPUR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and in soft /loose soil etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5 m but not exceeding 3.0 m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan in soft/loose soil etc complete all as specified and directed

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed

Removal of excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed.

M&L for RCC (nominal mix) 1:1.5:3 type A-1 using 20 mm graded stone aggregate as in slab supported on wall,beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

M&L forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work (except brick), straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed. Note : Serviceable old bricks obtained from dismantling shall be re-used under this item.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed

M&L for Form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work for fair finished concrete surface exc 5 cm but not exc 10 cm wide complete all as specified and directed.

M&L for mild steel TMT bar 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 50mm thick sand stone slabs set and jointed over joists etc jointed in cement mortar 1:4 complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm / 450X 350X 7 mm / 300x 600x7 mm / 450x 300x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15 mm thick in CM 1:4 complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, coloured, M-35 Grade with grey cement and pigment laid over and including sand cushing 25 mm thick complete all as specified and directed.

M&L (execpt interlocking paver block) for interlocking paver block, any shape and size of 60 mm thickness, by vibratory compaction, cutting paver blocks in required size and pattern, filling joints with sand complete all as specified and directed. Note : (1) Old paver block obtained from dismantle shall be used. (2) 25mm thick Sand cushioning shall be included in quoted rate.

M&L for chequered cement concrete tiles 25 cm x 25 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement with and including integral water proofing compound at rate of 03% by weight of cement or as per manufacturer specification complete all as specified and directed.

Cleaning of sewage line 100 mm dia SGWG /RCC NP 2 pipe or any other specification including removing all type of blockage from manholes to manholes by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc including deposing off all sludge waste ,debries etc to outside MD land complete all as specified and directed. (Contractor has to depute extra labour for cleaning of sewage lines to clear the blockage in sewer lines as and when required.)

Cleaning of sewage line 150 mm dia SGWG /RCC NP 2 pipe or any other specification including removing all type of blockage from manholes to manholes by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc including deposing off all sludge waste ,debries etc to outside MD land complete all as specified and directed. (Contractor has to depute extra labour for cleaning of sewage lines to clear the blockage in sewer lines as and when required.)

Cleaning of sewage line 200 mm dia SGWG /RCC NP 2 pipe or any other specification including removing all type of blockage from manholes to manholes by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc including deposing off all sludge waste ,debries etc to outside MD land complete all as specified and directed. (Contractor has to depute extra labour for cleaning of sewage lines to clear the blockage in sewer lines as and when required.)

M&L for making arrangement for bypass to nearest manhole or line to keep sewage flow continuous including providing required necessary tools and plants such as portable pump set, flexible hose pipe etc all as required at site upto 30m distance complete all as specified and directed.

M&L for making arrangement for bypass to nearest manhole or line to keep sewage flow continuous including providing required necessary tools and plants such as portable pump set, flexible hose pipe etc all as required at site exc. 30m but n.exc. 60 m distance complete all as specified and directed.

Cleaning and maint of sewage system including removing all type of blockage from wash hand basins ,bottle trap, kitchen sink, water closet, Nahani trap , Floor trap, Gully trap sewage lines of any dia, manholes,by providing all tools and plants including bamboos, iron rod, bucket, rope, ladder etc and manpower as required complete all as specified and directed. Note:- (i) Contractor has to provide minimum Two Nos safaiwals /Sweepers daily to attend the sewage complaint which is received day to day by sub division. (ii) Any complaint which is not completed within two days from the date of issue of complaint, compensation will be charged @Rs. 200/- per day for each complaint. (iii) No of blockage/ complaints cleared per day shall be recorded in MB is to be paid to the contractor as each Job. (iv) Cleaning of septic tank, manhole, sewage line and soakage well are paid separately under relevant item.

Hiring vehicle mounted sewer suction cum jetting machine of capacity 3000 to 12000 litre with recycling facility for cleaning /descaling/maintenance of sewer line and Manhole for underground drainage system complete all as specified and directed by engineer in-charge.

Disconnecting existing water tanks of capacity exc 250 liters but not exe 500 Ltrs setting aside or lowering if required for cleaning and reconnecting or refixing in same position,including cleaning and removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc and including neatly writing date of cleaning (DD/MM/YY) upto 10 mm thick and upto 100 mm height each bold capital/ Italic letters with white/black synthetic enamel paint complete all as specified and directed.

Disconnecting existing water tanks of capacity exc 500 liters but not exe 1000 Ltrs setting aside or lowering if required for cleaning and reconnecting or refixing in same position,including cleaning and removing all scale and dirt etc from tanks and from the mouths of circulating pipes etc and including neatly writing date of cleaning (DD/MM/YY) upto 10 mm thick and upto 100 mm height each bold capital/ Italic letters with white/black synthetic enamel paint complete all as specified and directed.

M&L for scooping and taking out sludge and foreign material from manhole of any size of depth not exc 1.50m and including removing and re-fixing of manholes covers and appliances required for safe disposal of sludge and foreign material by carrying out the same in covered van/trolley out side defence land and disposed off at distance not less than 1.5 KM away from defence land which is not detrimental to public health complete all as specified and as directed. Note :- Net volume of internal size of each manhole, up to the depth of water from bottom shall be measured for payment purpose including de-watering and removing dry/wet sludge etc complete all as specified and directed.

M&L for scooping and taking out sludge and foreign material from manhole of any size of depth exc 1.50m but not exc. 3.00m depth and including removing and re-fixing of manholes covers and appliances required for safe disposal of sludge and foreign material by carrying out the same in covered van/trolley out side defence land and disposed off at distance not less than 1.5 KM away from defence land which is not detrimental to public health complete all as specified and as directed. Note :- Net volume of internal size of each manhole, up to the depth of water from bottom shall be measured for payment purpose including de-watering and removing dry/wet sludge etc complete all as specified and directed.

M&L for scooping and taking out water and foreign material from septic tank / soak well of any description and any depth including removing and re-fixing of septic tank and soak well cover etc and appliances required for safe disposal of sludge and foreign material by carrying out the same in covered van/trolley out of defence land complete all as specified and directed. Note :- Net volume of internal size of each septic tank / soak well up to the depth of water from bottom shall be measured for payment purpose including de-watering and removing dry / wet sludge etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

M&L PVC (SWR) vent cowl 110 mm complete all as specified and directed.

M&L PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed

S&F cast iron soil, waste and vent 100 mm bore of pipes (sand cast) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F cast iron soil, waste and vent 75 mm bore of pipes (sand cast) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F cast iron soil, waste and vent 100 mm bore of pipes (sand cast in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed.

S&F cast iron soil, waste and vent 75 mm bore of pipes (sand cast) in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed.

S&F in repair CI Bends (any radius), diminishing pieces or tapers (larger bore measured) for 75 mm bore of pipe complete all as specified and directed.

S&F in repair CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors for 75 mm bore of pipe complete all as specified and directed.

S&F in repair CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors for 100 mm bore of pipe complete all as specified and directed.

S&F in repair cast iron cowls for 100 mm bore of pipe complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 100 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

Salt Glazed stone ware (SGSW) drain pipes, grade 'A' of 100 mm internal diameter of pipe, laid in trenches and jointed in CM 1:1 complete all as specified and directed.

Salt Glazed stone ware (SGSW) drain pipes, grade 'A' of 150 mm internal diameter of pipe, laid in trenches and jointed in CM 1:1 complete all as specified and directed.

Salt Glazed stone ware (SGSW) drain pipes, grade 'A' of 200 mm internal diameter of pipe, laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M&L for SGSW gully trap 150 x 150 mm square or round mouthed type 'P' complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100 mm dia of pipe complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia of pipe complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 200/225 mm dia of pipe complete all as specified and directed.

M&L in repair wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe also including plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repair Water closet vitreous china squatting pan, orissa pattern 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) and including provision of lime concrete bedding ,'P' or 'S' trap 100 mm bore , flushing pipe ,anti-syphonage pipe and connection etc and making good to floor complete all as specified and directed.

M&L in repair for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.

S&F in repair PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, inlet, ball valve, float and handle etc complete all as specified and directed.

M&L in repair for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including supply & fixing pillar cock 15 mm bore CP fancy type, PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required for 75mm internal dia of pipe complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of stone sett paving of any description or thickness laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete un-reinforced in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar for 100 mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar for 150 mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar for 200 mm internal dia of pipe complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required for 100 mm internal dia of pipe complete all as specified and directed.

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3471522)

M/S ROHIT CONSTRUCTION (BID ID -3480891)

Satish kumar and company (BID ID -3476609)