Construction of Integrated Check Post at Bhairahawa in Nepal - Main Package-1

Amount

Total Amount of BoQ 2

Amount after unconditional Rebate

Description of Work / Item(s)

Amount

Total Amount of Schedule I, III, V & VI (Percentage Rate) and Schedule II & IV (Item Rate)

Schedule-I Civil Works based on DSR 2018 ( BOQ 3 )

Schedule-II Civil Works Non Schedule Items ( BOQ 4 )

Schedule-III Electrical Works based on DSR 2018 ( BOQ 5 )

Schedule-IV Electrical Works Non Schedule Items ( BOQ 6 )

Schedule-V Wet Riser and Sprinkler System(based on DSR-2019) ( BOQ 7 )

Schedule-VI Prime Cost Items ( BOQ 8 )

Bidder Name

Amount

K S M BASHIR MOHAMMAD AND SONS(GSTN-09AAEFK3277F1Z9)

BRIDGE AND ROOF COMPANY INDIA LTD.(GSTN-19AABCB3166E1ZW)

Dineshchandra R Agrawal Infracon Pvt. Ltd.(GSTN-24AABCD9523D1Z0)

BSR INFRATECH INDIA LIMITED(GSTN-NA)

Description of Work / Item(s)

Amount

Schedule-II

CIVIL WORKS NON SCHEDULE

BUILDINGS & SHEDS

Providing and fixing machine cut, mirror/ eggshell/ flame/ polished , 18 mm th.Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (To be secured to the backing by means of cramps, which shall be paid for separately).

Providing and laying burnt clay face brick tiles (as per approved pattern 17-20 mm nominal thickness of 230x75 mm size on walls jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over plastered wall and finished neat complete.

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers manually on prepared surface (200 mm layer), mixing by mix in place method with rotavator at OMC, and compacting with rammer to achieve the desired density, complete as per clause 401 of MoRT&H specifications (Table:- 400-2 : For Grading-II Material).

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in Charge) - The sheets shall have total coated thickness (TCT) of 0.50 mm with Zinc Aluminium Alloy of AZ- 150 (as per AS 1397-1993) yield strength of 550MPA. The sheets shall have a hot dip metallic Zinc- Aluminium Alloy coating of Zn- 45% and Al- 55% with total mass coating of 150 gsm/sqm on both sides. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Design,manufacture,supply & erection of Pre-engineered Building as per building description : (Animal Shed) Drawing No.: RITES/AP/BH/Arch/AS/01 Building Type : Clear Span Width : 9.0 Mtrs. O/O Of Steel Line. Width Module : 1 @ 9.0 Mtrs. O/O Of Steel Line. Length : 16.920 Mtrs. O/O Of Steel Line. No. Of Bay Spacing : 3 @ 5.64 Mtrs. O/O Of Steel Line. End Wall Col. Spacing : Not Applicable Roof Slope : 1:10 Clear Height : 4.0M Clear Height Under The Knee (This item Continues from Sr. No. 8.1 to 8.3)

Brick wall height : Full Height Open All Around The Building, Only Gable Portion Of Both Endwall Will Be Cladded. Diagonal Bracing (type/location): Diagonal Rod Bracing in Roof Only. Diagonal Bracing (FEW/BEW ) : Rigid End Frame Frame (Half Bay Loaded) Frame at Both End Walls. Roofing : Single Skin 0.47mm TCT Hi-Rib Colour Coated Galvalume profiled Panel. Wall : Single Skin 0.50mm TCT Hi-Rib colour coated Galvalume Profiled panel. Daylight panels (nos.and %): NA Eave Gutter /Flashing /Downpipe: Matching to roof & wall

DESIGN LOADS Live Load For Roof : 0.75kN/SQM Dead Load For Roof : 0.15kN/sqm Wind speed/pressure : 47 Meter/Second Seismic Zone/Factor : V (0.36) Deflection in Rafter (Vertical) : Span/180 Deflection to Column (Horizontal) : Height/150 Deflection to Purlin : Span/150 Applicable Codes: Primary Member Design - IS:800-2007 (Limit State Design) Without Chapter-12 Secondary Member Design - IS:801-1975 Loads & Load Combination - IS:875-1987 Earthquake Load- IS:1893-2016 (Part-1)-Only Static Analysis Wind Load As Per IS:875-2015 (Part-3) With Terrain Category-2 Slender Sections For Web & Semi-Compact Sections For Flanges.

Structural Steel Specification a) Primary Steel All primary steel members shall be solid web buildup section in manufactured out of 345 Mpa steel plates. All portals shall be supplied in fully finished and ready to use condition for field assembly. b) Cold formed section These shall be Z/C shaped cold formed section out 275 GSM Galvanised steel stripes conforming to ASTM 570. c) Rod bracing, flange bracing, misc. steel components such as clips etc. shall be out of 240/250 Mpa steel conforming to IS 2062. d) Structural Hardware All primary steel connections shall be established using high tensile Gr. 8.8 fasteners. Steel secondary connections bolt shall be done by Galvanised Gr. 4.6 fasteners.

Design,manufacture,supply& erection of pre-Engineered Building as per description : (Fumigation shed) Drawing No.: RITES/AP/BH/Arch/FS/01 Building Type :Clear Span Width : 11.50 Mtrs. O/O Of Steel Line. Width Module : 1 @ 11.50 Mtrs. O/O Of Steel Line. Length : 16.0 Mtrs. O/O Of Steel Line. No. Of Bay Spacing : 1 @ 5.455 Mtrs. + 1 @ 5.090 Mtrs. + 1 @ 5.455 Mtrs. O/O Of Steel Line. End Wall Col. Spacing : 2 @ 5.75 Mtrs. O/O Of Steel Line. Roof Slope : 1:10 Clear Height : 6.0M Clear Height Under The Knee (This item Continues from Sr. No. 9.1 to 9.3)

Brick wall height : 3.0M Brickwall& Above Cladding All Around The Building. Diagonal Bracing (type/location) : Diagonal Rod/Pipe Bracing in Roof Only. Diagonal Bracing (FEW/BEW ) : Rigid End Frame Frame (Half Bay Loaded) Frame at B End Walls. Roofing : Single Skin 0.47mm TCT Hi-Rib Colour Coated Galvalume profiled Panel. Wall : Single Skin 0.50mm TCT Hi-Rib colour coated Galvalume Profiled panel. Daylight panels (nos.and %): NA Eave Gutter /Flashing /Downpipe: Matching to roof & wall

DESIGN LOADS Live Load For Roof : 0.75kN/SQM Dead Load For Roof : 0.15kN/sqm Wind speed/pressure : 47 Meter/Second Seismic Zone/Factor : V (0.36) Deflection in Rafter (Vertical) : Span/180 Deflection to Column (Horizontal) : Height/150 Deflection to Purlin : Span/150 Primary Member Design - IS:800-2007 (Limit State Design) Without Chapter-12 Secondary Member Design - IS:801-1975 Loads & Load Combination - IS:875-1987 Earthquake Load- IS:1893-2016 (Part-1)-Only Static Analysis Wind Load As Per IS:875-2015 (Part-3) With Terrain Category-2 Slender Sections For Web & Semi-Compact Sections For Flanges.

Structural Steel Specification a) Primary Steel All primary steel members shall be solid web buildup section in manufactured out of 345 Mpa steel plates. All portals shall be supplied in fully finished and ready to use condition for field assembly. b) Cold formed section These shall be Z/C shaped cold formed section out 275 GSM Galvanised steel stripes conforming to ASTM 570. c) Rod bracing, flange bracing, misc. steel components such as clips etc. shall be out of 240/250 Mpa steel conforming to IS 2062. d) Structural Hardware All primary steel connections shall be established using high tensile Gr. 8.8 fasteners. Steel secondary connections bolt shall be done by Galvanised Gr. 4.6 fasteners.

Design,manufacture,supply & erection of Pre-engineered Building as per building description: (Porters Rest Area-01) Drawing NO.: RITES/AP/BH/Arch/PRA-01/01 Building Type : . Clear Span Width : 18.0 Mtrs. O/O Of Steel Line. Width Module : 1 @ 3.885 Mtrs. + 1 @ 10.0 Mtrs. + 1 @ 3.885 Mtrs. C/C Of Steel Column Length : 58.0 Mtrs. O/O Of Steel Line. No. Of Bay Spacing : 1 @ 8.770 Mtrs. + 7 @ 7.00 Mtrs. C/C Of Steel Column. End Wall Col. Spacing : 1 @ 3.885 Mtrs. + 2 @ 5.0 Mtrs. + 1 @ 3.885 Mtrs. C/C Of Steel Column Roof Slope : 1:10 Clear Height : 4.50M Clear Height Under The Knee (This item Continues from Sr. No. 10.1 to 10.3)

Brick wall height : Full Height Open All Around The Building, Only Gable Portion Of Both Endwall Will Be Cladded. Diagonal Bracing (type/location): Diagonal Rod Bracing in Roof & Sidewalls. Diagonal Bracing (FEW/BEW ): Rigid End Frame Frame (Half Bay Loaded) Frame at Both EndWalls. Roofing : Single Skin 0.47mm TCT Hi-Rib Colour Coated Galvalume profiled Panel. Wall : Single Skin 0.50mm TCT Hi-Rib colour coated Galvalume Profiled panel. Daylight panels (nos. and %): NA Eave Gutter /Flashing /Downpipe: Matching to roof & wall

DESIGN LOADS Live Load For Roof : 0.75kN/SQM Dead Load For Roof : 0.15kN/sqm Wind speed/pressure : 47 Meter/Second Seismic Zone/Factor : V (0.36) Deflection in Rafter (Vertical) : Span/180 Deflection to Column (Horizontal) : Height/150 Deflection to Purlin : Span/150 Applicable Codes: Primary Member Design - IS:800-2007 (Limit State Design) Without Chapter-12 Secondary Member Design - IS:801-1975 Loads & Load Combination - IS:875-1987 Earthquake Load- IS:1893-2016 (Part-1)-Only Static Analysis Wind Load As Per IS:875-2015 (Part-3) With Terrain Category-2 Slender Sections For Web & Semi-Compact Sections For Flanges.

Structural Steel Specification a) Primary Steel All primary steel members shall be solid web buildup section in manufactured out of 345 Mpa steel plates. All portals shall be supplied in fully finished and ready to use condition for field assembly. b) Cold formed section These shall be Z/C shaped cold formed section out 275 GSM Galvanised steel stripes conforming to ASTM 570. c) Rod bracing, flange bracing, misc. steel components such as clips etc. shall be out of 240/250 Mpa steel conforming to IS 2062. d) Structural Hardware All primary steel connections shall be established using high tensile Gr. 8.8 fasteners. Steel secondary connections bolt shall be done by Galvanised Gr. 4.6 fasteners.

Design,manufacture,supply & erection of Pre-engineered Building as per building description: (Porters Rest Area-02) (2 No.) Drawing No.: RITES/AP/BH/Arch/PRA-02/01 Building Type : Clear Span Width : 18.0 Mtrs. O/O Of Steel Line. Width Module : 1 @ 3.885 Mtrs. + 1 @ 10.0 Mtrs. + 1 @ 3.885 Mtrs. C/C Of Steel Column Length : 35.50 Mtrs. O/O Of Steel Line. No. Of Bay Spacing : 1 @ 9.270 Mtrs. + 4 @ 6.50 Mtrs. C/C Of Steel Column. End Wall Col. Spacing : 1 @ 3.885 Mtrs. + 2 @ 5.0 Mtrs. + 1 @ 3.885 Mtrs. C/C Of Steel Column Roof Slope : 1:10 Clear Height : 4.50M Clear Height Under The Knee (This item Continues from Sr. No. 11.1 to 11.3)

Brick wall height : Full Height Open All Around The Building, Only Gable Portion Of Both Endwall Will Be Cladded. Diagonal Bracing (type/location) : Diagonal Rod Bracing in Roof & Sidewalls. Diagonal Bracing(FEW/BEW ): Rigid End Frame Frame (Half Bay Loaded) Frame at Both EndWalls. Roofing : Single Skin 0.47mm TCT Hi-Rib Colour Coated Galvalume profiled Panel. Wall : Single Skin 0.50mm TCT Hi-Rib colour coated Galvalume Profiled panel. Daylight panels (nos. and %): NA Eave Gutter /Flashing /Downpipe: Matching to roof & wall

DESIGN LOADS Live Load For Roof : 0.75kN/SQM Dead Load For Roof : 0.15kN/sqm Wind speed/pressure : 47 Meter/Second Seismic Zone/Factor : V (0.36) Deflection in Rafter (Vertical) : Span/180 Deflection to Column (Horizontal) : Height/150 Deflection to Purlin : Span/150 Applicable Codes: Primary Member Design - IS:800-2007 (Limit State Design) Without Chapter-12 Secondary Member Design - IS:801-1975 Loads & Load Combination - IS:875-1987 Earthquake Load- IS:1893-2016 (Part-1)-Only Static Analysis Wind Load As Per IS:875-2015 (Part-3) With Terrain Category-2 Slender Sections For Web & Semi-Compact Sections For Flanges.

Structural Steel Specification a) Primary Steel All primary steel members shall be solid web buildup section in manufactured out of 345 Mpa steel plates. All portals shall be supplied in fully finished and ready to use condition for field assembly. b) Cold formed section These shall be Z/C shaped cold formed section out 275 GSM Galvanised steel stripes conforming to ASTM 570. c) Rod bracing, flange bracing, misc. steel components such as clips etc. shall be out of 240/250 Mpa steel conforming to IS 2062. d) Structural Hardware All primary steel connections shall be established using high tensile Gr. 8.8 fasteners. Steel secondary connections bolt shall be done by Galvanised Gr. 4.6 fasteners.

Design,manufacture,supply & erection of Pre-engineered Building as per building description: (Warehouse Export) Drawing No.: RITES/AP/BH/Arch/Warehouse Export/01 Building Type : Clear Span Width : 20.0 Mtrs. O/O Of Steel Line. Width Module : 1 @ 20.0 Mtrs. O/O Of Steel Line. Length : 91.0 Mtrs. O/O Of Steel Line. No. Of Bay Spacing : 1 @ 8.0 Mtrs. + 10 @ 7.50 Mtrs. + 1 @ 8.0 Mtrs. O/O Of Steel Line. End Wall Col. Spacing : 4 @ 5.0 Mtrs. O/O Of Steel Line. Roof Slope : 1:10 Clear Height : 7.0M Clear Height Under The Knee Brick wall height : 3.0Mtrs. Brickwall& Above Cladding All Around The Building. Diagonal Bracing (type/location): Diagonal Rod Bracing in Roof & Both Side walls. Diagonal Bracing (FEW/BEW ): Rigid End Frame Frame (Half Bay Loaded) Frame at Both EndWalls. Roofing : Single Skin 0.47mm TCT Hi-Rib Colour Coated Galvalume profiled Panel. Wall : Single Skin 0.50mm TCT Hi-Rib colour coated Galvalume Profiled panel. (This item Continues from Sr. No. 12.1 to 12.3)

Daylight panels (nos. and %): Polycarbonate Sheet, 2.0mm Thick, 18 Nos. Of Size 2400mm x 1000mm Eave Gutter /Flashing /Downpipe : Matching to roof & wall S-Type Louvers : 1.0M High S-Type Louvers At Both Sidewall Of Building Turbovents : 600mm Throat Dia., 2 Nos. In Each Bay (Total 20 Nos. In Roof) Additional Load : • Additional Load Of min.10 Kg/Sqm. On Roof For Services Etc. • Additional Load Of min.150 Kg/Rmt On All Around The Periphery Of Sidewall Columns For Cable Tray & Pipe Rack. Mezzanine : Dead Load = 250 Kg/Sqm. For 100mm Thick RCC Slab Live Load = 300 Kg/Sqm. Mezzanine Area = 20M X 8.115M Mezzanine Height = As per drawing 0.80mm Thick GI Deck Sheet Is Considered For Mezzanine Area. 1 Nos. Of Staircase Is for Mezzanine Access.

DESIGN LOADS Live Load For Roof : 0.75kN/SQM Dead Load For Roof : 0.15kN/sqm Wind speed/pressure : 47 Meter/Second Seismic Zone/Factor : V (0.36) Deflection in Rafter (Vertical) : Span/180 Deflection to Column (Horizontal) : Height/150 Deflection to Purlin : Span/150 Applicable Codes: Primary Member Design - IS:800-2007 (Limit State Design) Without Chapter-12 Secondary Member Design - IS:801-1975 Loads & Load Combination - IS:875-1987 Earthquake Load- IS:1893-2016 (Part-1)-Only Static Analysis Wind Load As Per IS:875-2015 (Part-3) With Terrain Category-2 Slender Sections For Web & Semi-Compact Sections For Flanges.

Structural Steel Specification a) Primary Steel All primary steel members shall be solid web buildup section in manufactured out of 345 Mpa steel plates. All portals shall be supplied in fully finished and ready to use condition for field assembly. b) Cold formed section These shall be Z/C shaped cold formed section out 275 GSM Galvanised steel stripes conforming to ASTM 570. c) Rod bracing, flange bracing, misc. steel components such as clips etc. shall be out of 240/250 Mpa steel conforming to IS 2062. d) Structural Hardware All primary steel connections shall be established using high tensile Gr. 8.8 fasteners. Steel secondary connections bolt shall be done by Galvanised Gr. 4.6 fasteners.

Design,manufacture,supply & erection of Pre-engineered Building as per building description: (Ware House Import) (2 No) Drawing No.: RITES/AP/BH/Arch/WI-1/01 Building Type : Clear Span Width : 20.0 Mtrs. O/O Of Steel Line. Width Module : 1 @ 20.0 Mtrs. O/O Of Steel Line. Length : 83.50 Mtrs. O/O Of Steel Line. No. Of Bay Spacing : 1 @ 8.0 Mtrs. + 9 @ 7.50 Mtrs. + 1 @ 8.0 Mtrs. O/O Of Steel Line. End Wall Col. Spacing : 4 @ 5.0 Mtrs. O/O Of Steel Line. Roof Slope : 1:10 Clear Height : 7.0M Clear Height Under The Knee Brick wall height : 3.0Mtrs. Brickwall& Above Cladding All Around The Building. Diagonal Bracing (type/location): Diagonal Rod Bracing in Roof & Both Sidewalls. Diagonal Bracing (FEW/BEW ): Rigid End Frame Frame (Half Bay Loaded) Frame at Both EndWalls. (This item Continues from Sr. No. 13.1 to 13.3)

Roofing : Single Skin 0.47mm TCT Hi-Rib Colour Coated Galvalume profiled Panel. Wall : Single Skin 0.50mm TCT Hi-Rib colour coated Galvalume Profiled panel. Daylight panels (nos. and %) : Polycarbonate Sheet, 2.0mm Thick, 18 Nos. Of Size 2400mm x 1000mm Eave Gutter /Flashing/Downpipe: Matching to roof & wall S-Type Louvers : 1.0M High S-Type Louvers At Both Sidewall Of Building Turbovents : 600mm Throat Dia., 2 Nos. In Each Bay (Total 18 Nos. In Roof) Additional Load : • Additional Load Of min. 10 Kg/Sqm. On Roof For Services Etc. • Additional Load Of min.150 Kg/Rmt On All Around The Periphery Of Sidewall Columns For Cable Tray & Pipe Rack. Mezzanine : Dead Load = 250 Kg/Sqm. For 100mm Thick RCC Slab Live Load = 300 Kg/Sqm. Mezzanine Area = 20M X 8.115M Mezzanine Height = As per drawing 0.80mm Thick GI Deck Sheet Is Considered For Mezzanine Area. 1 Nos. Of Staircase Is Considered For Mezzanine Access.

DESIGN LOADS Live Load For Roof : 0.75kN/SQM Dead Load For Roof : 0.15kN/sqm Wind speed/pressure : 47 Meter/Second Seismic Zone/Factor : V (0.36) Deflection in Rafter (Vertical) : Span/180 Deflection to Column (Horizontal) : Height/150 Deflection to Purlin : Span/150 Applicable Codes: Primary Member Design - IS:800-2007 (Limit State Design) Without Chapter-12 Secondary Member Design - IS:801-1975 Loads & Load Combination - IS:875-1987 Earthquake Load- IS:1893-2016 (Part-1)-Only Static Analysis Wind Load As Per IS:875-2015 (Part-3) With Terrain Category-2 Slender Sections For Web & Semi-Compact Sections For Flanges.

Structural Steel Specification a) Primary Steel All primary steel members shall be solid web buildup section in manufactured out of 345 Mpa steel plates. All portals shall be supplied in fully finished and ready to use condition for field assembly. b) Cold formed section These shall be Z/C shaped cold formed section out 275 GSM Galvanised steel stripes conforming to ASTM 570. c) Rod bracing, flange bracing, misc. steel components such as clips etc. shall be out of 240/250 Mpa steel conforming to IS 2062. d) Structural Hardware All primary steel connections shall be established using high tensile Gr. 8.8 fasteners. Steel secondary connections bolt shall be done by Galvanised Gr. 4.6 fasteners

(Ware House Parking) Supplying, providing, fabricating, welding, handling, assembling and fixing in position, erecting at site at all heights tubular space structure system (Drawing NO.: RITES/AP/BH/Arch/PROCESS AREA) to support roof and consisting of electric resistance or induction butt welded tubes/pipes confirming to IS: 1161/1239/3589/4923 ERW Steel pipe of approved equivalent and forged/machined mild steel cones/ props/ tube end connectors, solid forged spherical node connectors, High tensile bolts, support system, stubs and mild steel base plate, columns and other structural members conforming to IS: 2062 as per approved space structure system and including transportation, cutting, threading, machining, leads and lifts up to all heights, tools and plants and necessary scaffolding etc. required for all operations involved. The complete structure to be painted with one coat of epoxy primer and one coat of polyurethane paint as per Engineer-in charge.

(Import Process Area) Supplying, providing, fabricating, welding, handling, assembling and fixing in position, erecting at site at all heights tubular space structure system (Drawing NO.: RITES/AP/BH/Arch/PROCESS AREA) to support roof and consisting of electric resistance or induction butt welded tubes/pipes confirming to IS: 1161/1239/3589/4923 ERW Steel pipe and forged/machined mild steel cones/ props/ tube end connectors, solid forged spherical node connectors, High tensile bolts, support system, stubs and mild steel base plate, columns and other structural members conforming to IS: 2062 as per approved space structure system and including transportation, cutting, threading, machining, leads and lifts up to all heights, tools and plants and necessary scaffolding etc. required for all operations involved. The complete structure to be painted with one coat of epoxy primer and one coat of polyurethane paint as per Engineer-in charge.

(Export Process Area) Supplying, providing, fabricating, welding, handling, assembling and fixing in position, erecting at site at all heights tubular space structure system (Drawing NO.: RITES/AP/BH/Arch/PROCESS AREA) to support roof and consisting of electric resistance or induction butt welded tubes/pipes confirming to IS: 1161/1239/3589/4923 ERW Steel pipe and forged/machined mild steel cones/ props/ tube end connectors, solid forged spherical node connectors, High tensile bolts, support system, stubs and mild steel base plate, columns and other structural members conforming to IS: 2062 as per approved space structure system and including transportation, cutting, threading, machining, leads and lifts up to all heights, tools and plants and necessary scaffolding etc. required for all operations involved. The complete structure to be painted with one coat of epoxy primer and one coat of polyurethane paint as per Engineer-in charge.

Providing and laying Non- slip floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all olours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 ement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

Supplying, providing, and fixing in position at all heights Sky Light sheet- 10 mm thick multi-walled Polycarbonate sheet

Providing & Spreading of Non Metal floor hardener as per BSCP 204,BS 3900 Part R - 4 BS-4204 @ 3 Kg/sqm in floor concrete. (As per manufactured specification)

Extra for in providing & fixing channel for preparing panels of required size and then vaccume dewatering fresh cement concrete work by levelling with screed vibrators dewatering of excess water through vaccume pump with bottom filter mat and top mat dually sealling the edges around finishes with power floter and power trowel to obtain hard surface with labour, materials,masonary,generator for power supply tools and plants with all lead and lift as per specifications and as directed by Engineer- in- Charge.

Providing & laying polythene sheet below trimix

Charges for getting the building/structural designs approved by RITES for proof checking/vetting by IIT.

Design & supply of structure design of PEB structure (including design of foundations, mezzanine or ground floor as per architecture drawings as per NBC quidelines & prevalling IS codes, coordinated with steel superstructure drawings supplied by approved PEB vendor and in accordance with architectural GAD supplied with tender. Submission of design/drawings with calculation for approval to RITES.

Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 60x60x 75 cm of mix 1:2:4(1 cement:2 fine sand : 4 graded stone aggregate 40 mm nominal size), every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 60x60x75 cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately).

INTERNAL PLUMBING

SANITARY INSTALLATIONS

Providing & Fixing white glazed vitreous china wash basin with, 32mm C.P. brass waste of standard pattern complete including cutting and making good the wall and sealing the sleeves as required including fixing on brackets. Oval wash basin

Providing & Fixing white glazed vitreous china wash basin with, 32mm C.P. brass waste of standard pattern complete including cutting and making good the wall and sealing the sleeves as required including fixing on brackets. Under Counter wash basin

Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providivg and Fixing of 15mm dia. Self closing type C.P. brass pillar tap for wash basin, including cutting and making good the walls wherever required.

Providivg and Fixing of 15mm dia. Self closing type C.P. brass bib cocks with wall flanges for washing area, including cutting and making good the walls wherever required.

Providing, fixing & testing and commissioning of white viterous china large half stall urinal including providing & fixing CI / MS bracket (duly painted with 2 coats of paints over a coat of primer), including 32mm dia CP brass waste with dome type grating complete including cutting and making good the wall and sealing the sleeves as required including fixing on brackets.

Providing, fixing & testing and commissioning of glazed vitreous china flat back urinals partition complete with fixing on wall with dash fasteners complete in all respects with cuttiing of wall and making good the same as directed.

Prividing and Fixing 15mm C.P. brass self closing urinal valve complete with CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange including cutting and making good the walls wherever required.

Providing & fixing adjustable type wash basin for handicap toilet with, 32mm C.P. brass waste of standard pattern complete including cutting and making good the wall and sealing the sleeves as required including fixing on brackets.

Providing & fixing raised toilet seat for handicap toilet of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing CP brass Health faucet with 8mm dia 1 mtr. Long PVC tube and wall hook fixed to wall with rawl plugs and CP brass screws complete.

Providing and fixing (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2-way Bib Cock.

Providing and fixing CP brass soap dish 113 mm dia and 43mm deep with fixing handles and concealed fitting arrangement fixed in position by rawl plugs and CP brass screws weighing not less than 300gms.

Providing & fixing CP brass liquid soap dispenser with stainles steel lid and brackets fixed to wooden cleats with C.P. brass screws.

Prividing and Fixing 1.5 feet long connecting hose with CP brass nuts at both ends complete.

Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality. 600 mm long towel rail with total length of 620 mm, 66 mm wide and effective height of 88 mm, weighing not less than 900gms.

Providing and fixing CP brass towel ring half circular shape 206 mm long, 132 mm wide with minimum distances of 57 mm from wall face with concealed fittings arrangement of approved quality, weighing not less than 500 gms.

Supplying automatic 'NO-Touch' ABS electric hand-driers complete with all accessories & fittings.

Providing & Fixing 300mm long SS grab bars fixed to wall with rawl plugs and CP brass screws complete.

Providing and fixing Chiller cum Water Dispenser with an inbuilt RO water purifier, fan cooled condenser for fast cooling, double purification by RO + UF with TDS controller suitable to remove even dissolved impurities while retaining essential minerals. Dispenser shall be floor standing design, suitable for water from all sources such as bore-wells, tanks or tap-water. Dispenser shall have water storage capacity of 20 litres and should have corporates Filmtec RO membrane, filter change alarm, Auto-start and Auto-off, Inbuilt Auto-Flushing System, Built-in SMPS that supports wide range of input voltage (200-240V AC) also Corrosion free stainless steel body and Food grade, non-breakable, ABS plastic construction complete with following specifications. Type: Water Purifier Purification Capacity: 25 litres/ hour Max. Duty Cycle: 150 Liters / Day Input Voltage: 200-240 v AC Operating Voltage: 24V DC

SOIL, WASTE, VENT & RAIN WATER PIPES

Providing & fixing cast brass floor clean out plug with suitable insert keys for opening, male threaded joint with connection of soil/waste pipe with GI., sockets lubricated with grease.

Providing and fixing GI inlet fitting approximately 450 mm long with one or more 32/40/50mm dia.. GI Sockets welded and dipped in hot bitumen complete.

Providing and fixing 100mm dia. GI pipe approximately 450 mm long with one reducer elbow 100x50 mm and dipped in hot bitumen complete.

Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works. 125mm

Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works. 100mm

EXTERNAL PLUMBING

SEWERAGE SYSTEM

Providing and laying non-pressure NP3 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete with bed concrete 1:4:8(1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size as per standard design. 150 mm diameter

Providing and laying non-pressure NP3 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete with bed concrete 1:4:8(1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size as per standard design. 200 mm diameter

Providing and laying non-pressure NP3 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete with bed concrete 1:4:8(1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size as per standard design. 250 mm diameter

Providing and laying non-pressure NP3 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete with bed concrete 1:4:8(1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size as per standard design. 300 mm diameter

Constructing Solid blocks masonry circular type manhole 0.91 m internal dia at bottom and 0.60m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with FRP. cover and frame (Load bearing 20 Ton) 600 mm internal diameter conforming to EN 124 fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.

Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 mSolid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.

Constructing Solid blocks masonry circular manhole 1.22 m internal dia at bottom and 0.60 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :1.68 m deep with FRP. cover and frame (Load bearing 20 Ton) 600 mm internal diameter conforming to EN 124 fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.

Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.

Constructing Solid blocks masonry circular manhole 1.52 m internal dia at bottom and 0.60 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :2.30 m deep with FRP. cover and frame (Load bearing 20 Ton) 600 mm internal diameter conforming to EN 124 fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.

Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m. Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.

Procuring and installing LDPE septic tank with provision of sludge chamber and clear water chamber complete in all respects with following user provisions :25 Users

EXTERNAL WATER SUPPLY SYSTEM

Constructing Solid blocks masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with FRP cover with frame 600x600mm internal dimensions (20 ton load bearing) i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm

Constructing Solid blocks masonary chamber 90 cm X 90 cm X 100 cm inside with 75 class designation brick work in cement mortar 1: 4 ( 1 cement : 4 coarse sand ) for sluice valve with 600x600mm internal dimension(20 Ton load bearing) FRP cover with frame and RCC top slab 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design. Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.

Constructing Solid blocks masonary chamber 30 cm X 30 cm X 50 cm inside with 75 class designation brick work in cement mortar 1: 4 ( 1 cement : 4 coarse sand ) for sluice valve with 300x300mm internal dimension(2.5 Ton load bearing) FRP cover with frame and RCC top slab 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design. Solid blocks of approved quality and class designation 5 having compressive strength of 4-6 N/sq.mm.

Providing and fixing G.I. pipes (I.S. 1239 heavy duty class) complete with all necessary G.I. Fittings including all necessary fittings like bends, elbows, tees etc., either welded or screwed or flanged joints as per requirements, including all anchor blocks, anchor fasteners, couplings in all respects including enamel painting of required shade, cutting holes and chases in RCC wall and making good complete.150 mm dia

Providing and making connection of garden hydrant with MDPE pipe including saddle of pipe diax25mm dia and fixing on pipe complete in all respects.

Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge PN - 16 Pipe, 20 mm OD PE80 ISO : 4427

Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge PN - 12.5 Pipe, 25 mm OD PE80 ISO : 4427

Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge PN - 12.5 Pipe, 32 mm OD PE80 ISO : 4427

Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge PN - 12.5 Pipe, 40 mm OD PE80 ISO : 4427

Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge PN - 10 Pipe, 50 mm OD PE80 ISO : 4427

Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge PN - 6 Pipe, 63 mm OD PE80 ISO : 4427

Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge PN - 8 Pipe, 90 mm OD PE80 ISO : 4427

Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge PN - 8 Pipe, 110 mm OD PE80 ISO : 4427

Providing and fixing Blue Coloured MDPE pipes of PE 80 Grade stabilized including all MDPE electrofusion fittings i/c support at 1.0mm c/c & testing of joints complete as per direction of Engineer in Charge PN - 8 Pipe, 160 mm OD PE80 ISO : 4427

PUMPS

Providing, fixing and testing of skid mounted pumping system comprising of :- a) Horizontal centrifugal pumping set with CI body and bronze impeller with stainless steel SS 304 shafts connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply. b) GI Suction and delivery header with Ball valves Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. NRVs to be used should be with Springs and O-Ring arrangement. c) Complete set system to be mounted on a common base frame and shall follow following duty. Domestic Water Transfer Pump No. of Pumps: 2 (1 Working + 1 Stand by ) Capacity : app.500 lpm Head : 50m

Providing, fixing and testing of skid mounted pumping system comprising of :- a)Horizontal centrifugal pumping set with CI body and bronze impeller with stainless steel SS 304 shafts connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply. b)GI Suction and delivery header with Ball valves Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. NRVs to be used should be with Springs and O-Ring arrangement. c)Complete set system to be mounted on a common base frame and shall follow following duty. Filter/Softener Feed Pump No. of Pumps: 2 (1 Working + 1 Stand by ) Capacity : app.500 lpm Head : 25m

Pressure Filter (Domestic Water) Providing and fixing vertical pressure filter with dual media filter (comprising of 1050mm bed depth of graded sand gravel and 1050mm bed depth of Anthracite) fabricated from high performance M.S plate of minimum 6mm thick for shell & 8mm thick for dished ends with top and bottom flanged openings including top and bottom hub and lateral distribution and collection system complete with initial charge of filter media, face piping, valves, accessories, painting, testing and commissioning complete.(Tested to 6 Kg/m2) Discharge : 28000 lph Filtration Rate : 15000 lit./m2/h Suggested dia app. : 1.500 m

Activated carbon Filter (Domestic Water) Providing and fixing vertical activated carbon filter comprising of activated carbon filter media fabricated from high performance M.S plate of minimum 6mm thick for shell & 8mm thick for dished ends with top and bottom flanged openings including top and bottom hub and lateral distribution and collection system complete with initial charge of filter media, face piping, valves, accessories, painting, testing and commissioning complete.(Tested to 6 Kg/m2) Discharge : 28000 lph Filtration Rate : 15000 lit./m2/h Suggested dia app. : 1.500 m

Water Softener Providing and fixing ‘Cation’ ION exchange water softener fabricated from minimum 8mm thick M.S. plate on shell and 10mm thick M.S. plate on dished ends complete with initial charge of filter media and ION exchange resins, face piping accessories, piping testing and commissioning complete with resins of approved quality and make and brine tank of required capacity. (Bidder must indicate type and quantity of resin used and quantity of salt required per regeneration). Minimum expected rate of flow: 28000 lph Total soft water to be produced between two regeneration: app. 225 Cu.m Expected raw water hardness : app. 250-300 ppm(Hardness values are assumed. Please get it tested before execution) Expected treated water hardness: less than 100 ppm Max. working pressure : 4 Kg/cm2 Total soft water to be produced between two regeneration: app. 225 Cu.m

Providing and fixing M.S salt saturator, internally rubber lined as per requirement and externally painted with suitable anti-corrosive paint, with all required accessories for holding and supplying salt for softener complete in all respects, with electrically operated stirrer and of capacity 500 litres.

a) One incoming main isolation 160A TPN MCCB (25ka). b) 200 A TPN Fully taped copper bus bar in a separate bus bar chamber. c) 2 Nos. 40 A TPN MCB outgoing for domestic water transfer pumps with 2 Nos. DOL starter. d) Motor controller with float swich and controll wiring for switch on and swich off the pumps. Relay for cyclic operation of domestic water transfer pumps. Pump working sequence should change after every operation.Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter also consist of Single phase preventors complete with auto manual swiches, Voltmeter/Ameter, Indication lights. e) 2 Nos. 40 A TPN MCB outgoing for filter feed pumps with 2 Nos. DOL starter. f) Motor controller with float swich and controll wiring for switch on and swich off the pumps. Relay for cyclic operation of filter feed pumps. Pump working sequence should change after every operation. Contractor overload relays and MCBs should confirm to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammeter & voltmeter also consist of Single phase preventors complete with auto manual swiches, Voltmeter/Ameter, Indication lights.

Providing and fixing motor pump controller cum water level indicating panel in powder coated sheet metal box in 16 gauges M.S including the following: i) Electronic water level controller working on magnetic type sensing probes with necessary length of armored cable up to control panel. ii) Electronic minimum 4-level indicator with magnetic type sensing probes and necessary length of armored cable upto control panel. iii) Arrangement of alternate switching mechanism for operational and standby pumps.

(A) For Water level indicators with following details:

Underground water tanks

Minimum 4 level Multi level indicators with magnetic type sensor probes complete.

Centralized overhead water tank

Minimum 4 level Multi level indicators with magnetic type sensor probes complete.

(B) For water level controllers with electronic sensing probe complete in all respect for following functions.

i) Tubewell Water Pumps

To cut off at low level in raw water U.G tanks. And cut off at high level in U.G raw water tank.

Providing and fixing G.I. pipes (I.S. 1239 heavy duty class) complete with all necessary G.I. Fittings including all necessary fittings like bends, elbows, tees etc., either welded or screwed or flanged joints as per requirements, including all anchor blocks, anchor fasteners, couplings in all respects including enamel painting of required shade, cutting holes and chases in RCC wall and making good complete (The cost of flanges will be paid separately). 65mm dia

Providing and fixing G.I. pipes (I.S. 1239 heavy duty class) complete with all necessary G.I. Fittings including all necessary fittings like bends, elbows, tees etc., either welded or screwed or flanged joints as per requirements, including all anchor blocks, anchor fasteners, couplings in all respects including enamel painting of required shade, cutting holes and chases in RCC wall and making good complete (The cost of flanges will be paid separately). 80mm dia

Providing and fixing G.I. pipes (I.S. 1239 heavy duty class) complete with all necessary G.I. Fittings including all necessary fittings like bends, elbows, tees etc., either welded or screwed or flanged joints as per requirements, including all anchor blocks, anchor fasteners, couplings in all respects including enamel painting of required shade, cutting holes and chases in RCC wall and making good complete (The cost of flanges will be paid separately). 100mm dia

Providing and fixing C.I double flanges suction strainer bucket type/ “Y” type including, nuts, bolts and 3mm thick rubber insertion complete. a) 100mm dia

Providing and fixing butterfly valves, wafer end type class PN 1.0 as per I.S:13095 - 1991 or BS:5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) a) 100mm dia nominal bore.

Providing and fixing M.S. slotted cable tray supported from ceiling at intervals of 60cms on both ends including cable clips with nuts and bolts welding of support rods with ceiling inserts or through dash fasteners cutting and making good complete. a) 300mm wide

Providing and fixing M.S. slotted cable tray supported from ceiling at intervals of 60cms on both ends including cable clips with nuts and bolts welding of support rods with ceiling inserts or through dash fasteners cutting and making good complete. b) 150mm wide

Providing and fixing M.S. structural work fabricated from standard section e.g. M.S rounds, angles, channels, plates including cutting to size, drilling, welding fixing and welding to insert plates in RCC structural members or through dash fasteners as per site conditions as directed by Engineer-in-charge including cutting and making good the walls, ceilings and floors (for pipe supports, clamps etc.)

SUBMERSIBLE PUMP

Submersible single stage single entry pumps with C.I.body and C.I. two vane enclosed type impeller connected to TEFC submersible motor for 415 volts, 3 phase, 50 cycles including MCC panel with level controllers, auto control, sequential change over facility with one proper working at low level & two proper working at high level with an audible alarm including all interconnectivity cables, with both pumps connected to common outlet header including valves, non return valves, lifting chains etc. complete in all respect. (This item continues to Sr. No. 107.1 to 107.5)

(one working+One Standby)

(Solid handiling capacity 12mm)

Capacity : 225 lpm (Each)

Head : 12 m

HP (Approx) - 1.0 HP

UV Treatment: Providing and fixing automatic uV Treatment system consisting of electronic system, suitable to doze UV to a flow of water of maximum 28000 lph. against a pressure of 40-50psi complete with all standard accessories.

SEWERAGE TREATMENT PLANT-CAPACITY 170 CUM/DAY (85 KLD x 2)

Design, supplying, installing, testing & commissioning of SBR based Sewage Treatment Plant (excluding excavation, back filling & disposal of surplus earth MS/Civil construction work) for the following duty: (This item continues from Sr. No. 110.01 to 110.17)

Nature of effluent - Domestic Sewage from toilets, canteen kitchen waste water.

Daily average flow - 170 Cum / Day (85 KLD x 2)

Owners Scope- All Civil related activities, Power, Water and all plant room requirements like Treated water disposal, Drain trench, Ventilation, Lightining etc

The STP shall be designed based on the following parameters:

Flow Rate - 170 KL/day (85 KLD x 2)

BOD - 250 - 350 mg/lt.

COD - 400 - 500 mg/lt.

SS - 250 - 350 mg/lt.

Oil & Grease - 50 - 100 mg/lt.

The treated sewage shall have following characteristics:

BOD - less than 10 mg/lt.

COD - less than 100 mg/lt.

SS - Less than 10 mg/lt.

Oil & Grease - less then 10 mg/lt.

Supply, installation, testing & commissioning of 2 Nos. Stainless Steel Suitable Sized Manually operated Bar Screen made of SS 304 in RCC screen channel with Belt Conveyor, Aluminium Chute, Wheel Barrow.

Supply, installation, testing & commissioning of Non clogging type submersible pumps capable of handling solids up to 35 mm having CI. casing impeller complete with all accessories, valves, headers etc motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically. Pumps shall have following duty: (This item continues to Sr. No. 111.1 to 111.6)

Raw Sewage Transfer Pumps

Flow rate (each) = 7 m3/hr

Qty = 3 Nos (2W + 1SB)

Equalization Tank Transfer Pump

Flow rate (each) = 40 m3/hr

Qty = 2 Nos (1W + 1SB)

Supply, installation, testing & commissioning of Waste Activated Sludge Pumps -Non clogging type centrifugal pumps capable of handling solids up to 7-8 mm having C.I. casing & CI impeller complete with all accessories, motor of required capacity, Pumps shall have following duty: (This item continues from Sr. No. 112.1 to 112.3)

Flow rate (each) = 16 m3/hr

Head = 6 mtr

Qty = 02 Nos (1W + 1SB)

Supply, Installation, Testing & Commissioning of Jet Aeration System consisting of a Submersible pump connected to an injector type venturi assembly for aeration in Equalization Tank. Submersible Pump shall be Single Phase 1.5 kw motor rating.

Supply, Installation, Testing & Commissioning of Self Aspirating Unidirectional Jet Aeration System consisting of a jet motive pump connected to an injector type venturi assembly for aeration in SBR Tank. Jet motive pump shall be capable of maintaing 3.75 kg/hr SOR in the tank with 3 phase 5.9 kw motor rating.

Supply, Installation, Testing & Commissioning of Centrifugal pumps having C.I. casing & CI impeller complete with all accessories, valves, headers motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) Pumps shall have following duty: (This Item continues from Sr. No. 115.1 to 115.4)

Irrigation Pumps

Flow rate (each) = 6 m3/hr

Head = 30-35 Mtr

Quantity = 02 Nos (1W + 1S)

Supply, installation, testing & commissioning of SBR Package, Automated system which shall include MS Tank size of diameter 3.657 meter, 20.50 meter length, 6 mm thick. This tank will have three partitions. Each partition will represent one treatment unit namely – primary settler, equalization tank, and SBR, Surface Floating type Decanter with solid exclusive and all time scum free features to efficiently and uniformly withdraw clear supertant, consisting of Submersible Pump mounted to a float system. (This item continues to Sr No.116.1)

The decanter shall be free to move vertically while being guided horizontally through its hinged connection to allow free vertical displacement during the operation. Inlet of sewage water decantation and aeration shall be automatic and PLC controlled with the help of suitable equipment arrangement. SBR cycle shall be auto controlled with feedback of various equipments. Human Machine Interface shall be provided with PLC to make the system complete. 3 nos. Float Switches are provided in Equalization Tank & 4 nos. Float Switches are provided in SBR Tank for measuring level.

Electrical wiring for electrical connection of equipments.with cable trays ets.complete.

Supply, Installation, Testing & Commissioning of UV Disnfection System with required accessories.

Providing and fixing FRP Treated Water Tank of 25000 ltr capacity.

TUBE WELL SYSTEM

Supplying & installation of submersible pump set directly coupled with 7.5 HP motor nominal speed 2900 RPM suitable for operation on 3-phase, 50 cycles, 400 (+) / (-) 5% volts A.C. power supply to give yield of 30000/24000 LPH at a head of 50/70 mtrs. (This item continues from Sr. No. 121.1 to 121.4)

Total head = 50/70 Mt

Flow rate = 36000/30000 LPH

H P = Minimum 7.5 HP

(Or as per site condition)

Supply, installation and commissioning of panel board duly wired made of 16/18 SWG sheet including fixing of the same in wall/floor on angle iron frame as per site conditions, and fitted with the following: (This item continues from Sr. No. 123.1 to 123.9)

1 No. L & T make DOL starter.

1 No A/E make suitable range voltmeter size 96 mm.

1 No A/E make suitable range ammeter size 96 mm.

1 No. minilec make single phase preventer.

3 Nos MCB for lamps, ammeter and voltmeter.

3 Nos. indicating lamps (Essen/Rishab make).

1 No MCB of suitable range (MDS/Standard make).

Push button ON/ OFF switch L & T make - 1 No.

Supply & installation of 80 mm dia column pipe made out of 80 mm dia GI including the cost of fittings complete in all respect 'B' class pipe.

Providing & fixing heavy duty PVC sheathed copper conductor 1100 volts grade cables with clamps complete in all respect. (This item continues from Sr. No. 124.1 to 124.2)

Control cable for low water level guard 2 core 2.5 Sq.mm.

Power cable 3 core 4 Sq.mm.

FIRE FIGHTING WORKS (INTERNAL & EXTERNAL WORKS)

(A) PIPING & VALVES

Providing and fixing C.I. foot valves including nuts, bolts,1.5mm thick compressed asbestos gasket complete and companion flange as per table " E "in all respects 150 mm dia.

Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg/ cm2 of approved quality as specified. (This item continues from Sr. No. 128.1 to 128.2)

25 mm dia.

50 mm dia.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station. (This item continues from Sr. No. 129.1 to 129.2)

Dial diameter 100 mm calibration 0-15 kg/ sq.cm.

Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia..

Providing and fixing blank flanges as per table 'E' with asbestos gasket, nut, bolts, washers complete (This item continues to Sr. No. 130.1)

150 mm dia.

Providing and fixing one coat of 4 mm thick PYPKOTE/ COATAK anti-rust pipe protection including primer and lap of 25mm on external buried pipe including surface preparation, complete in all respects. (This item continues from Sr. No. 131.1 to 131.2)

80mm dia

100mm dia

(B) FIRE HYDRANT ACCESSORIES

Providing and fixing door with frame for all internal fire hydrants fabricated from 20x20x3 mm and 40x20x3 mm aluminium hollow box sections mounted with 3 no. of 100 mm Aluminium butt hinge on Aluminium angle frame of 45x45x5 mm size with hold fasts fixed to wall with P.C.C. (1:2:4) blocks 100x100x100 mm including 2 nos allen key lock for locking along with padlock arrangement & fully glazed with 4 mm thick float glass approved by local Fire Authority, powder coated fire red finish with " fire hose' written on front suitable to house 15 mm long two length of canvas hose with couplings, one no of branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire hose and supports for hoses, branch pipes, Axe and hose reel. Size 2100x 900 mm complete as per approved design including necessary fixing arrangement for hoses & axe and branch pipe.)

Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. Sheet with single or double glazed front door and locking arrangement, painted "Fire Red" with powder coated paint "Fire Hose" written on front including suitable supports to place 900 mm above ground level, approximately size 750x600x250 mm deep (to house two lengths of canvas hose with couplings, branch pipe and nozzle for external hydrants)

Providing and fixing gunmetal fire brigade suction 150 mm dia. for fire tank complete with PVC Cap companion flange as per table "E" nuts, bolts, gasket etc (This item continues to Sr. No. 135.1)

Supplying and fixing of Fire Man's Axe with heavy insulated rubber tested upto 20 KV and confirming to IS :926.

Air Cushion Tank for Risers

Providing and fixing of air vessel of the following specifications fabricated with MS Pipe of thickness specified specifications. (This Item continues to Sr. No. 138.01 to 138.12)

a. Diameter : 200 mm

b. Shell Thickness: 6.35 mm

c. Dish Ends : 10 mm

d. Height : 1000 mm

e. Finishing: Two coats of red enamal

paint over primer out side and two

coats of epoxy coating inside.

f. Material of construction: M.S

g. Test Pressure: 20 Kg/Sq.Cm.

h. Height of supporting legs: 400 mm

i. Quantity

Note: Contractor should submit general arrangement drawings before fabrication of vessel and ultrosonic test report to be submitted on supply of vessel and test to be conducted at the presence of Plumbing-In-Charge. Also cost shall include two nos. Gunmetal NRV(ISI Marked)

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : (This item continues to Sr. No. 139.1)

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.

(C)SPRINKLERS & ACCESSORIES

Providing & fixing 25mm dia. UL listed gunmetal inspector test and drain valve with integral sight glass connected to drain line complete in all respects.

(D) FIRE PUMPS & ACCESSORIES

Air Vessel for Fire Pump:

Providing and fixing of air vessel of the following specifications fabricated with MS sheets. (This Item continues from Sr. No. 145.01 to 145.12)

a. Diameter : 400 mm

b. Shell Thickness: 8 mm

c. Dish Ends : 10 mm

d. Height : 1500 mm

e. Finishing: Two coats of red enamal

paint over primer out side and two

coats of epoxy coating inside.

f. Material of construction: M.S

g. Test Pressure: 22 Kg/Sq.Cm.

h. Height of supporting legs: 400 mm

i. Quantity

Note: Contractor should submit general arrangement drawings before fabrication of vessel and ultrosonic test report to be submitted on supply of vessel and test to be conducted at the presence of Plumbing-In-Charge.

Providing and fixing liquid level controller for fire pump to stop fire pump in case of low level of water in tank , cost of conduit, cable and panel including making connection to pump panel and commissioning complete. (This item continues from Sr. No. 145.1 to 145.2)

Float type Sensor with panel

Installation

Providing and fixing liquid level controller for tubewell pump to start both the tubewell pumps in case of low level of fire water in tank, stop manually (when fire extinguished) also provision of over riding domestic water pumps inter-locking in case of fire, cost of conduit, probes or float switches cable and panel including making connection to pump panel and commissioning complete. (This item continues from Sr. No. 146.1 to 146.2)

Float type Sensor with panel

Installation

Supplying & laying of following 1100 volt grade PVC insulated sheathed copper conductor armoured cable as per specification in cable trays, clamped includes anchor fastners to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning. (For Jockey Pump 2 Runs) (This item continues to Sr. No. 147.1)

3 core 4 sqmm

Supplying & laying of following 1100 volt grade PVC insulated sheathed XLPE aluminium conductor armoured cables as per specification in cable trays, ducts, clamped includes anchor fastners to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.(For Main Hydrant/Sprinkler Pumps 2 Runs) (This item continues to Sr. No. 148.1)

3 core 35 sqmm

Cable end termination of the following PVC insulated sheathed PVC/XLPE aluminium conductor armoured cables of 1100 volt grade including supplying and fixing of crimping aluminium lugs, double compression glands with earthing facility at both ends of cables etc. complete as required (This item continues to Sr. No. 149.1 to 149.2)

3 core 35 sqmm Alumnium conductor cable

3 core 4 sqmm Copper conductor cable

Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels ,slotted angle, etc.) including cutting to size, drilling ,welding or insert plates including cost of (Hilti) fasteners, clamp in RCC structural members as directed, including two or more coats of synthetic enamel paint over one coat of primer after surface preparation including cutting and making good walls.

(E)FIRE EXTINGUISHERS & MISC. ITEMS

Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.)

Providing and fixing mechanical foam type (ISI marked) fire extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve 30 cm long high pressure discharge hose, discharge nozzle suspension bracket ISI marked finished externally with red enamel paint and fixed to wall with brackets complete with internal charger. (This item continues to Sr. No. 153.1)

9 liters capacity. (IS. 15683)

Providing and fixing water Co2(ISI marked) extinguishers including all accessories as per IS specification with wall bracket with rawl plug (This item continues to Sr. No. 154.1)

Capacity 9 liters.(IS:15683)

Providing and fixing ABC powder type fire extinguishers consisting of welded M.S. cylindrical body automatic modular ABC powder type extinguisher actuated through a sprinkler head mounted on The extinguisher body finished externally with red enamel paint and fixed to ceiling with brackets complete with internal charge. [For Transformer/DG/LT panel room] (This item continues to Sr. No. 156.1)

Capacity 5 Kg.(IS:15683)

Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site.

Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, trolly mounted, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 22.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.)

Providing and fixing mechanical foam type (ISI marked) fire extinguishers consisting of welded M.S. cylindrical body squeeze lever discharge valve 30 cm long high pressure discharge hose, discharge nozzle, trolly mounted ISI marked finished externally with red enamel paint and fixed to wall with brackets complete with internal charger. (This item continues to Sr. No. 158.1)

50 liters capacity. (IS. 15683)

PAVEMENT WORK

Clearing and grubbing road land including uprooting rank vegetation, grass, brushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of treees cut earlier and disposal of unserviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness.

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required to slope and compacting to meet requirement of Table 300- 2.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required to slope and compacting to meet requirement of Table No. 300- 2.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. (Grading-IV)

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. (Grading-V)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(laying uing mechanical paver)

Providing and laying 100mm thick factory made cement concrete interlocking paver block of M-45 grade by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer - in - charge.

SIGNAGE WORKS

Providing, Supplying & fixing of Sign Boards made of S-304 grade Stainless steel Pipes with braces of SS grade S-304 of square pipe flats rectangular section etc. including , cutting argon welding polishing, buffing complete with necessary holes nuts, bolts & caps, anchor plates of SS grade ASTM – 304 as per size , drawing and to the satisfaction of Engineer in charge. The Signage Substrate shall be of 4mm ACP sheet with face fully covered by RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting and messages with overlay sheeting / HIGH INTENSITY PRISMATIC GRADE Type IV / Cast Vinyl to be fixed with Very High Bond tape of 24mm wide and 2.3mm thick, to the back support frame of 19mm X 24mm X1.2mm thick SS Rectagular Pipe. Complete with desired foundations ( as per details ) including Excavation PCC1:4:8, RCC 1:2:4 , Center shuttering , Foundation bolts and curing . All stainless steel items shall be of S-304 Grade (EXTERNAL SIGNAGES) (Material should be in compliance with Code of practise for Road signs, Indian Road congress 2010, IRC-67-2010) (This description is common from item from S No. 168.1 to 168.5 )

(Design Nos.1) Providing, Supplying & fixing Single sided Sign Board of size 1930 mm x 1320 mm (50 mm dia SS pipe of S-304 grade 1.6mm thick) with inner frame of 1830mm x 1220mm ( of 19 mm x 24mm rectangular, 1.20mm thick SS pipe of S-304 Grade) along with diagonal support also of 19mm x 24mm rectangular, 1.20mm thick SS pipe of S-304 Grade, with sign substrate of 1830mm x 1220mm of 4mm ACP sheet with face fully covered by RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting and messages and symbols accordingly, fixed to inner frame with the help of Very High Bond tape of 24mm wide and 2.3mm thick. The board shall have a leg support of 168mm dia 3mm thick SS pipe of S-304 grade of height 4420mm, with necessary holes, nuts bolts & caps. The boards shall be grouted in a foundation size of 1200mm x 900mm x 900m with CC 1: 2: 4 laid with the help of shuttering. All relevant specs to confirming to detail drawing enclosed.

(Design Nos. 2) Providing, Supplying & fixing Single sided Sign board of size 974mm x 1284mm ( 32mm dia SS pipe of S-304 grade 1.6mm thick ). with inner frame of 910mm x 1220mm (of 19mm x 24mm rectangle, 1.2mm Thick SS pipe of S-304 Grade ) along with diagonal support also of 19mm x 24mm sectangle, 1.2mm Thick SS pipe of S-304 Grade, with sign substrate of size . 910mm x 1220mm, of 4mm ACP sheet with face fully covered with RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting, and messages and symbols accordingly, fixed to inner frame of 910mm x 1220mm of ( 19mm x 24mm square, 1.2mm Thick SS pipe of S-304 Grade ) with the help of Very High Bond tape of 24mm wide and 2.3mm thick. .The board shall have a one leg support of 60mm dia 2mm thick SS pipe of S-304 grade of height 4.084m with Hold fast The boards shall be grouted in a foundation size of 600mm x 600mm x 900mm with CC 1: 2: 4 laid with the help of shuttering Complete. All relevant specs confirming to detail drawing enclosed.

(Design Nos. 3) Providing Supplying & fixing Double Sided Sign board of size 1930mm x 1320m ( 50mm dia SS pipe of S-304 grade 1.6mm). with inner frame of 1830mm x 1220mm (of 19mm X 24mm X 1.2mm thick Rectangular SS pipe of S-304 Grade ) along with diagonal support also of 19mm X 24mm X 1.2mm thick Rectangular pipe of S-304 Grade, with sign substrate of size 1830mm x 1220mm, of 4mm ACP with face fully covered by RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting, and messages and symbols accordingly, fixed to inner frame of 1830mm x 1220mm of (19mm X 24mm X 1.2mm Thick Rectangular pipe of S-304 Grade ) with the help of Very High Bond tape of 24mm wide and 2.3mm thick. .The board shall have a two leg support of 73mm dia 2mm thick SS pipe of S-304 grade of height 4.04m and 3.4mmm respectively, with necessary holes, nuts bolts & caps. The boards shall be fixed on two nos. foundations of size 900mm x 900mm x 1200m with CC 1:2:4 laid with the help of shuttering. All relevant specs confirming to detail drawing enclosed.

(Design Nos. 4) Providing, Supplying & fixing Single sided Sign board of size 974mm x 673mm & 974mm x 368mm ( 32mm dia SS pipe of S-304 grade 1.6mm thick ). with inner frame of 910mm x 610mm & 910mm x 304mm (of 19mm x 24mm rectangular , 1.2mm Thick SS pipe of S-304 Grade ), with sign substrate of size 910mm x 610mm & 910mmx 304mm, of 4mm ACP with face fully covered with RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting, and messages and symbols accordingly, fixed to inner frame of 910mm x 610mm & 910mmx 304mm of ( 19mm x 24mm square, 1.2mm Thick SS pipe of S-304 Grade ) with the help of Very High Bond tape of 24mm wide and 2.3mm thick .The board shall have a one leg support of 60mm dia 2mm thick SS pipe of S-304 grade of height 2840mm with Hold fast The boards shall be grouted in a foundation size of 600mm x 600mm x 600mm with CC 1: 2: 4 laid with the help of shuttering Complete. All relevant specs conforming to detail drawing enclosed.

(Design Nos. 5) Providing, Supplying & fixing Single sided Sign board of size 1320mm x 2540mm ( 50mm dia SS pipe of S-304 grade 1.6mm thick ). with inner frame of 1220mm x 2440mm (of 19mm x 24mm rectangle, 1.2mm Thick SS pipe of S-304 Grade ) along with diagonal support also of 19mm x 24mm rectangle, 1.2mm Thick SS pipe of S-304 Grade, with sign substrate of size 1220mm x 2440mm, of 4mm ACP with face fully covered by RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting, and messages and symbols accordingly, fixed to inner frame of 1220mm x 2440mm of ( 19mm x 24mm rectangle, 1.2mm Thick SS pipe of S-304 Grade ) with the help of Very High Bond tape of 24mm wide and 2.3mm thick. .The board shall have a one leg support of 168mm dia 3 mm thick SS pipe of S-304 grade of height 4040mm with base plate of 10mm thick SS plate of size 600mm x 600mm with 4 Nos. stiffeners of 10mm SS plate of S-304 grade. The boards shall be fixed on a foundation size of 1500mm x 900mm x 900mm with CC 1: 2: 4 laid with the help of shuttering and 12 Nos. of foundation bolts of 20mm dia SS, S-304 grade of 600mm length Complete. All relevant specs confirming to detail drawing enclosed.

WALL/ PILLAR MOUNTED EXTERNAL SIGNAGE (Design Nos. 8) Providing, Supplying & fixing Single sided Sign Board of size 600 mm x 900 mm with suitable inner frame and proper support, with sign substrate of suitable size of 4mm ACP sheet with face fully covered by RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting and messages and symbols accordingly, fixed to inner frame with the help of Very High Bond tape of 24mm wide and 2.3mm thick. The board is to be fixed on RCC wall/pillar with dash fasteners of SS pipe of S-304 grade. All stainless steel items shall be of S-304 Grade ( EXTERNAL SIGNAGES) (Material should be in compliance with Code of practise for Road signs, Indian Road congress 2010, IRC-67-2010)

Double Sided Overhead Retro Reflective Sign Boards

Providing, Supplying & fixing of Double Sided Overhead Retro Reflective Sign Boards made of 4mm thick ACP Sheet with face and rear fully covered with RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting and messages with overlay sheeting, with support frame structure of 72 mm X 72 mm x 2 mm SS Pipe of S-304 grade side and inner frame of 7856 mm x 1530 mm (of 19 mm X 24 mm X 1.2 mm thick Rectangular pipe of S-304 Grade) along with vertical support of 19 mm X 24 mm X 1.2 mm thick Rectangular pipe of S-304 Grade, with signage fixed with Very High Bond tape of 24 mm wide and 2.3 mm thick and rivets. Size of the board 8000 mm X 1674 mm. All relevant specification confirming to detail drawing enclosed.

Over Head Gantry Structure

Fabrication Supplying & Erecting of Over Head Gantry structure made of steel work in built up tubular (round, suare or rectangular hollow tubes etc. trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete : Hot finished seamless type tubes. The whole gantry shall be painted with 2 Coat of Epoxy paint of desired colour.

The gantry shall be erected on two nos. foundation of size 3500 mm x 2000 mm x 2580 mm with pedestal size of 900 mm x 900 mm x 1830 mm and footing of size 3500 mm x 2000 mm x 600 mm of RCC of 1: 2: 4 and PCC of 1:4:8 in size 3550 mm x 2050 mm x 150 mm with reinforced steel of 1750 Kg, 12 mm dia and 10 mm dia TOR steel with 12 foundation bolts of 1220 mm length and 25 mm dia for one foundation complete with center shuttering. Complete as per approved drawing and to the satisfaction of engineer in charge. (Detail as per enclosed drawing)

Fascia Sign Board Providing, Supplying & fixing of Facia Sign Boards made of 4mm thick ACP Sheet with face covered with RETRO REFLECTIVE MICRO PRISMATIC Type IV Sheeting and messages with overlay sheeting, with edge support frame structure of 72mm X 72mm X 2mm SS Pipe of S-304 grade and 19mm x 24mm x 1.5mm inner frame with diagonals and bracing. Messages and graphics shall be plotter cut with overlay sheeting or HIGH INTENSITY PRISMATIC GRADE Type IV fixed with Very High Bond tape of 24mm wide and 2.3mm thick and rivets, fixed on to a existing structure with the help of suitable expansion fastners. (Detail as per enclosed drawing) ( EXTERNAL SIGNAGES) Material should be in compliance with Code of practise for Road signs, Indian Road congress 2010, IRC-67-2010)

INTERNAL SIGANGES

Supplying & fixing of Emergency Escape signages made of 1mm SS sheet with face fully covered with Photo-luminescent sheet with message and letters Plotter / Electronically cut text of vinyl lamination. (EXTERNAL SIGNAGES) Material should be in compliance with Code of practise for Road signs, Indian Road cingress 2010, IRC-67-2010) (INTERNAL SIGNAGES) Material should be in compliance with Code of practise for Road signs, Indian Road cingress 2010, IRC-67-2010) (This description is common from Sr. No. 177.1 to 177.2)

Fire Extingusher Boards size (250 mm x 250 mm)

Fire Exit (4 Nos.) (250 mm x 250 mm)

Ceiling Hung Sign Board-Single Sided

Manufacturing, Supplying & fixing of ceiling hung sign board of size 900 mm x 300 mm (Single Sided) as shown in the drawing with all necessary texts and symbols. Sign Board shall be made of 4 mm Thick ACP Fully covered with High Intensity Micro Prismatic Sheting (Type IV) with powder coated aluminium frame work of specified sections. Supported with frame of 19 mm x 24 mm x 1.2 mm thick SS rectangle pipe and 25 mm dia. pipe stainless steel pipe (S-304 grade). (INTERNAL SIGNAGES) Material should be in compliance with Code of practise for Road Airport signs, Indian Road congress 2010, IRC-67-2010)

Ceiling hung sign board (Double Sided)

Manufacturing, Supplying & fixing of ceiling hung sign board of size 900mm x 300mm (Double Sided) as shown in the drawing with all necessary texts and symbols. Sign Board shall be made of 4mm Thick ACP Fully covered with High Intensity Micro Prismatic Sheting (Type IV) with powder coated aluminium frame work of specified sections. Supported with frame of 19mm x 24mm x 1.2mm thick SS rectangle pipe and 25 mm dia. pipe stainless steel pipe (S-304 grade). (INTERNAL SIGNAGES) Material should be in compliance with Code of practise for Road Airport signs, Indian Road congress 2010, IRC-67-2010) Exit/Entry (2 Nos)

Manufacturing, Supplying & fixing of S.S.Plate of following sizes made of 2mm SS sheet with message and letters Plotter / Electronically cut text of vinyl lamination including all nuts, bolts and other accessories. (Material should be in compliance with Code of practise for Road and Airport signs, Indian Road congress 2010, IRC-67-2010) a) Ladies Toilet (12 Nos.) ( Size 150 mm x 150 mm) (Only figure Based) b) Gents Toilet (12 Nos.) ( Size 150 mm x 150 mm) (Only figure Based) c) Handicapped Toilet (3 Nos.) ( Size 150 mm x 150 mm) d) Child Care (3 Nos.) ( Size 150 mm x 150 mm) e) Wash Room ( Size 300 mm x 100 mm) (Figure + Text based) (12 Nos.) (This item continues up to Sr. No. 182.1)

f) Drinking water ( Size 300 mm x 100 mm) (5 Nos) g) Dining Hall (2 nos.) h) Immigration ( 3 ) i) Customs (3) j) Retail Shops (3) k) Exit (11) l) Conference Room ( Size 300 mm x 100 mm) 2 No. m) Waiting Hall ( Size 300 mm x 100 mm) 2 No. n) Tourist Information Centre ( Size 300 mm x 100 mm) 5 No. o) Restricted Area ( Size 300 mm x 150 mm) (3 Nos.) p) Stairs ( Size 300 mm x 100 mm) (Only figure Based) (5 Nos) q) Bank ( Size 300 mm x 100 mm) 3 No. r) Plates for office area ( Size 300 mm x 100 mm) (60 Nos) s) Conference Room ( Size 300 mm x 100 mm) 2 No. t) Guest Room (2 No.) u) Committee Room ( 1 No.) v) Command and Control Room ( Size 300 mm x 150 mm) 2 No.

GUIDE MAP

Providing and fixing of signage made of SS outer frame 1200mm x 900mm with one vertical and horizontal braces of SS 304 grade stainless steel 50x50x2mm square tube covered with ACP sheet 3mm thick on back side with written matter / logo of approved colour and language on coloured overlay and lamination, the front side be provided polycarbonate sheet 2mm thick and translite printing of Master Plan duly laminated , the complete board be fixed to stainless steel SS 304 grade 125mm dia pipe 7’ – 0” long legs on both side with 4 nos.SS attachment cleats / clips and the pipes be fixed above plates of SS 10mm thick 0.3m x 0.3m size and 0’ – 6’’ pipe below plate having triangular supports of SS plate 10mm (0.15m x 0.10) on all four sides at lower portion (hanging down below plate), both posts embedded in PCC 1:2:4 blocks of size 2’x2’x2’-6” in pit and fixed with 4 nos. stainless steel nut and bolts of size 2’ long 16mm dia and top of vertical pipe be closed with a semi spherical cap of stainless steel (This item continues up to Sr. No. 184.1)

All the sheets be fixed properly on the SS frames and joint be sealed to make the assembly water proof complete back lit with electrical LED light fitting (electrical point provided within 2 meter of spot of fixing).The whole signage post is to be fabricated as per drawing and directions of the Engineer in-Charge.

PLANTATION AND HORTICULTURE

Boundary Plantation

Boundary plantation wlth Eucalyptus species (suitable for water logging condition), Perimeter=2.58 km, Plant to Plant Spacing 3.5 m., total no. of plant = 738

Distance fixing pit to pit (3md for 1600 pits)

Coconut rope purchase for planting line management

Pitting per ha 1600 pits (size of pits : 45cm.30cm.30cm) is needed 32 md/ha

Plantation of seedling (20md/1600 seedlings)

Purchase and Transportation of seedling & vemicompost

Eucalyptus Seedling Purchase, grown in polytube (3"*7")& height is > 1 foot. (10% extra seedling for moratity & replacement)

871 Seedlings with polytube (3"*7") transportation by pickup van (loading and unloading) from nursery to plantation site about 7 km (750 seedling/van )

Transportation of seedling within site (600 seedling/md) for 738 seedlings

Vermicompost purchase (Per plant 1 kg)

Vermicompost transportation by Pickup van (loading and unloading) from Gaushala to plantation site about 7 km

Transportation of vermicompost within site & mixing into pit (300kg/md)

Gardening with show plants

Show plants purchase

Palm Trees (Perennial), above 5 feet height

Flowering plants (Perennial), 2-4 feet height

Medium size evergreen & other tree species (Perennial), 3- 4 feet height

Show plants transportation

1068 show plants transportation by Pickup van (loading and unloading) from nursery to plantation site about 7 km (425 plants/van)

Transportation of show plants within site (300 show plants/md) for 1750 show plants

Show plants plantation

Distance fixing pit to pit (3md for 1600 pits)

Coconut rope purchase for planting line management

Pitting per ha 1600 pits (size of pits : 45cm*30cm$30cm) is needed 32 md/ha

Plantation of show plants (20md/1600 plants)

Vermicompost purchase & mixing into pit

Vermicompost purchase (Per plant 1 kg)

Vermicompost transportation by Pickup van (loading and unloading) from Gaushala to plantation site about 7 km

Transportation of vermicompost within site & mixing into pit (300 kg/md)

Natural live hedge perennial plant (Karnini, Duranta, Mini-exora, Mini-taggar) plantation (Perimeter is 4210 feet, plant to plant spacing = 9 inch)

Natural live hedge plant purchase

Vermicompost purchase (Per plant 0.25kg)

Vermicompost transportation by Pickup van (loading and unloading) from Gaushala to plantation site about 7 km

Transportation of vermicompost within site & mixing into pit (300 kg/md)

5614 Natural live hedge plants transportation by Pickup van (loading and unloading) from nursery to plantation site about 7 km (4000 plants/van)

6 Transportation of Natural live hedge plants within site (1200 hedge plants/md) for 5614 hedge plants

Distance fixing pit to pit (lmd for 1600 pits)

Coconut rope purchase for planting line management

Pitting per ha 1600 pits (size of pits :15cm*15cm*15cm) is needed 3md/ha

Plantation of hedge plants (2 md/1600 plants)

Monitoring (Technical assistance), Care and maintenance of whole plantation & gardening work for 12 months

Caretaker (4 person for 04 months, salary @Nrs.16230/month/person) (+ 1 month salary for festival)

Caretaker dress(4 person, @Nrs.10000/person

Bicycle purchase ( 1 Bicycle/ caretaker) for caretaker

Irrigation to the planted grass and plants as per need

Water tanker hire for 4 months for irrigation

Necessary instruments, equipments etc. purchase

Bidder Name

Amount

K S M BASHIR MOHAMMAD AND SONS(GSTN-09AAEFK3277F1Z9)

BRIDGE AND ROOF COMPANY INDIA LTD.(GSTN-19AABCB3166E1ZW)

Dineshchandra R Agrawal Infracon Pvt. Ltd.(GSTN-24AABCD9523D1Z0)

BSR INFRATECH INDIA LIMITED(GSTN-NA)

Description of Work / Item(s)

Amount

Schedule-IV Electrical Works Non-Schedule Items

SUPPLY & INSTALLATION OF FITTINGS AND FANS -SUB HEAD

Supply, Installation, Testing & commissioning of recessed 2' X2' LED luminaire, Housing CRCA, Efficacy >=100lm/w having a minimum system level lumen package of 3600 lumens ,IP 20 protection,isolated driver etc. complete in all respect as required similar to WIPRO Cat : CRCO10R038HP57GL1 or equivalent make.

Supply, Installation, Testing & commissioning of surface 2' X2' LED luminaire, Housing CRCA, Efficacy >=100lm/w, having a system level lumen package of 3600 lumens with IP 20 protection,isolaed driver etc. complete in all respect as required similar to WIPRO Cat : CRCO10S038HP57GL1 or equivalent make.

Supply, Installation, Testing & commissioning of Pressure Diecast LED Bulkhead 10W (>=700lumens) with Efficiency 70lm/w Bulk head luminaire for interior & exterior use, complete in all respect as required. Similar to WIPRO cat LW07-141-XXX-57-G1 or equivalent make.

Supply, Installation, Testing & commissioning of Pressure diecast Aluminium housing Surface Mounted Light suitable for 18W(>=1567 Lumen Output), 6000K CCT LED Downlight complete in all respect as required. Similar to WIPRO Cat : LD80-171-XXX-60-SM or equivalent make.

Supply, Installation, Testing & commissioning of pressure diecast aluminium12W (>=1200 lumen output), 6500K CCT recessed downlighter LED luminaire complete in all respect as required. Equivalent to WIPRO cat LD90-141-XXX-65-XX or equivalent make.

Supply, Installation, Testing & commissioning of Surface / suspended Mounted linear Light suitable for 20 Watts (>=2000 lumens), with minimum 6500K CCT LED Extruded Aluminium housing, complete in all respect as required. Similar to WIPRO Cat: LL20-281-XXX-65AL1 or equivalent make.

Supply, Installation, Testing & commissioning of 40 W surface / suspended linear 4ft LED luminaire, Housing Extruded Aluminium, Efficacy >=100lm/w, with minimum CCT of 5700K and having a system level lumen package of 4000 lumens and IP 40 protection,driver etc. complete in all respect as required similar to WIPRO Cat :LL24-541-XXX-57-XX or equivalent make.

Supply, Installation, Testing & commissioning of Surface / suspended Mounted Light suitable for 80W with 10400Lm and minimum 5700K CCT LED highbay complete in all respect as required. Similar to Wipro Cat LH21-122 060 57 XX or equivalent make.

Supply, Installation, Testing & commissioning of Pressure diecast Aluminium housing Surface Mounted Light suitable for 12W(>=1000 Lumen Output) with minimum 6000K CCT LED Downlight complete in all respect as required. Similar to WIPRO Cat : LD80-101-XXX-60-SM or equivalent make.

Supplying of A.C. electric Ceiling fans with following sweep, capacitor type with double ball bearing complete with 300 mm down rod, canopies, shackles, blades, but without regulator suitable for operation on 230 / 240 Volts, 50 Hz, single phase, A.C. supply etc. as reqd.

Supplying of wall bracket fan 400 mm sweep fitted with inbuilt regulator complete with wire guard and fixing arrangement on wall.

Supply, Installation, Testing and commissioning of 600 mm dia Almornard make or equivelent heavy duty Air Circulator Fan to be mounted on coulumn complete in all respect.

Supplying of following size of single phase 240 V A.C Exhaust fan heavy duty complete with motor, blade frames with louvers as required.

250 mm Fiber Type

300 mm Fiber Type

380 mm Metallic Type

450 mm Metallic Type

Supplying of single phase 240 V A.C decorative type plastic body exhaust fan 100 mm dia. complete with motor, blade frames with louvers as required suitable for toilets.

BOARDS, DISTRIBUTION BOARDS AND CABLES-SUBHEAD

Supplying and fixing following rating 230 Volt DP MCB in SP&N DB steel enclosure complete with connections, testing and commissioning etc. as required.

40 Amp, DP MCB

63 Amp, DP MCB

Supplying and fixing following rating 415 Volt TP&N MCB/MCCB in TP&N DB sheet steel enclosure complete with connections, testing and commissioning etc. as required.

40Amp 415V, TPN MCB

63 Amp 415 V, TPN MCB

100 Amp 415 V, TPN MCB

160 Amp 415 V, TPN MCCB

MAIN BOARD FOR ADMINISTRATIVE BUILDING (GROUND FLOOR)

Supplying, installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 500A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

1 No. 250A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

4 Nos. 120A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

6 Nos. 63A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

SUB BOARD FOR ADMINISTRATIVE BUILDING (FIRST FLOOR)

Supplying, installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 250A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

2 No. 100A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

3 Nos. 63A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

MAIN BOARD FOR CUSTOM OFFICE (GROUND FLOOR)

Supplying, installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 400A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

1 No. 250A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

4 Nos. 100A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

5 Nos. 32A DP MCB.

SUB BOARD For CARGO BUILDING (FIRST FLOOR)

Supplying, Installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2 mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 250 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

4 No. 100A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

5 Nos. 32A DP MCB.

MAIN BOARD FOR WARE HOUSE (IMPORT - 1) (GROUND FLOOR)

Supplying, Installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2 mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 400 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

8 No. 63A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

MAIN BOARD FOR WARE HOUSE (IMPORT - 2 & EXPORT) (GROUND FLOOR)

Supplying, installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2 mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 300 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

8 No. 63A TP MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

Main Panel (Feeder Pillar-7) for Jawan Barrack, Officer's Barrack

Design, manufacture, supply, installation, testing and commissioning of compartmentalised wall mounted / floor mounted Cubical Panel fabricated out of 2 mm CRCA sheet dust & vermin proof duly phosphatized & powder coated. The sheet steel shall undergo minimum seven tank treatment the board includes 415 V electrolitic Aluminium Bus Bar 600 Amp TPN, complete with Termaination Box for incomer, interconnection, Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required. (Note :- Provsion should be made in Incomer for 2 Nos. 3.5 X 400 sq mm cable)

Incomer

400 A 4P MCCB 25 KA- 1 no.

Outgoing

160 A 4P MCCB 25 KA - 2 nos.

320 A 4P MCCB 25 KA - 2 nos.

MAIN-BOARD FOR OFFICER'S BARRACK

Supplying, installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 200 A, 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

3 No. 100A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

2 No. 63A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

SUB-BOARD FOR OFFICER'S BARRACK (G.F+F.F)

Supplying, installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 125 A, 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

3 No. 63A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

MAIN-BOARD FOR JAWAN BARRACK

Supplying, installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 400 A, 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

3 No. 125A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

2 No. 63A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

SUB-BOARD FOR JAWAN BARRACK (G.F+F.F+S.F)

Supplying, installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 125 A, 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

4 No. 63A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

MAIN BOARD FOR PUMP HOUSE

Supplying, installing, testing & commissioning of compartmentalised wall mounted / floor mounted cubicle board made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 400A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

2 Nos. 200A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

5 Nos. 63A 4P MCCB 25 kA with thermal magnetic O/L & S/C release & handle.

75HP Fully automatic Star/delta starter - 2Nos.

15HP Fully automatic Star/delta starter - 2Nos.

8 Nos. 40 A 4P MCB

3 Nos. upto 7.5 HP fully automatic DOL starter

3 Nos. upto 10 HP fully automatic Star/DELTA starter

5 Nos.25 A 4P MCB

4 Nos. upto 3 HP fully automatic DOL starter

Supply of hot dip galvanised cable tray of following sizes and fixing the same on wall/slab complete with supports/hangers etc complete as per specification and as per the direction of Engineer-in-charge.

Supply of hot dip galvanised Raceways of following sizes and fixing the same with accessories complete as per specification and as per the direction of Engineer-in-charge.

EXTERNAL LIGHTING-SUB HEAD

Supply, Installation, testing & commissioning of 10 M high Hot Dip Galvanized Octagonal Poles with a galvanizing thickness of minimum 65 microns (Internally & Externally), 200 mm dia at the bottom & 100 mm dia at top, 3 mm sheet thickness with base plates of 350 mmx350 mmx20 mm thikness, anchor bolts, foundation & 1.5 mtr long arms, the poles should have internal pole box with cover complete as per secifications as required.

Supply and erection of 90W LED street light with IP-66 degree of protection, complete in all respect.

Supply of 350W LED flood light suitable for Highmast Flood with intgreal control gear with potted drivers with IP 66 degree of protection,complete in all respect as required.

Supply Installation, Testing and Commissining of 30M high mast shaft in three sections suitable for 47m/sec wind speed, with raising lowering system comprising, head frame, luminaries carriage with fixing of 12nos. of 350Watt LED flood light fixture, in symmetrical arrangement, double drum winch, 6mm dia meter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial including foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. Wiring material, power cables between panel and mast, MCB in base compartment, CG mounting clamps and bolts, etc. including relay timer for auoamtic switching ON and OFF of luminaires at dusk to dawn.

Supply & erection of twin dome aviation obstruction lights with two nos no. 100 W GLS lamps.

Fabrication and supplying of winch driving power tool with electronic motor, remote switch, manual handle for operating winch with torque limiter etc. complete as required.

Supplying of following 1.1 KV grade aluminium conductor extruded XLPE insulated PVC innersheath, GI wire/tape armoured specified and outer PVC sheathed cable of following specifications and sizes as per IS 7098 ( Part I ) as required.

4x10 Sqmm

4x16 Sqmm

3.5 x35 sqmm

3.5 x50 sqmm

3.5 x95 sqmm

3.5 x150 sqmm

3.5 x185 sqmm

3.5 x240 sqmm

3.5 x300 sqmm

3.5 x400 sqmm

FFEDER PILLAR-1, 2, 3

Supply, installation, testing & commissioning of External Lighting Panels double door, compartmentalised & slanting roof (300mm extended), suitable for 3 phase, 4 wire, 415Volt, 50Hz, AC supply, totally enclosed free standing , weather and vermin proof outdoor type fabricated from 14 SWG CRCA sheet steel with aluminium busbars ,earth bus, lockiing arrangement, gland plate complete as required including associated civil works like excavation, brick work, plaster and providing & fixing below noted accessories and with following incoming & outgoings:

cubicle board should be made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 150A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMER:

1 No. 100A, TP MCCB 25kA thermal magnetic O/L & S/C release, handle & equipped with phase indicating lights, on/off indicating light, start/stop push bottom & control circuit MCBs.

OUTGOING

63 A, TPN MCB , 10 KA 3 Nos

40 A, TPN MCB , 10 KA 4 Nos

32 A, TPN MCB , 10 KA 1 Nos

Feeder Pillar No.- 4

Supply, installation, testing & commissioning of External Lighting Panels double door, compartmentalised & slanting roof (300mm extended), suitable for 3 phase, 4 wire, 415Volt, 50Hz, AC supply, totally enclosed free standing , weather and vermin proof outdoor type fabricated from 14 SWG CRCA sheet steel with aluminium busbars ,earth bus, lockiing arrangement, gland plate complete as required including associated civil works like excavation, brick work, plaster and providing & fixing below noted accessories and with following incoming & outgoings:

cubicle board should be made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 160 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMER:

1 No. 125 A, 4P MCCB 25KA thermal magnetic O/L & S/C release, handle & equipped with phase indicating lights, on/off indicating light, start/stop push bottom & control circuit MCBs.

OUTGOING:

63 A, TPN MCB , 10 KA 3 Nos

40 A, TPN MCB , 10 KA 5 Nos

32 A, TPN MCB , 10 KA 1 Nos

MAIN FEEDER PILLAR - 5 FOR PROCESS AREA (IMPORT)

Supply, installation, testing & commissioning of External Lighting Panels double door, compartmentalised & slanting roof (300mm extended), suitable for 3 phase, 4 wire, 415Volt, 50Hz, AC supply, totally enclosed free standing , weather and vermin proof outdoor type fabricated from 14 SWG CRCA sheet steel with aluminium busbars ,earth bus, lockiing arrangement, gland plate complete as required including associated civil works like excavation, brick work, plaster and providing & fixing below noted accessories and with following incoming & outgoings:

cubicle board should be made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 300 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

3 Nos. 160 A TP MCCB 36 kA with thermal magnetic O/L & S/C release & handle.

1 Nos. 100A TP MCCB 36 kA with thermal magnetic O/L & S/C release & handle.

SUB-FEEDER PILLAR FOR PROCESS AREA (IMPORT) (S.F.P-1)

Supply, installation, testing & commissioning of External Lighting Panels double door, compartmentalised & slanting roof (300mm extended), suitable for 3 phase, 4 wire, 415Volt, 50Hz, AC supply, totally enclosed free standing , weather and vermin proof outdoor type fabricated from 14 SWG CRCA sheet steel with aluminium busbars ,earth bus, lockiing arrangement, gland plate complete as required including associated civil works like excavation, brick work, plaster and providing & fixing below noted accessories and with following incoming & outgoings:

cubicle board should be made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 150A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

6 Nos. 32A DP MCB.

SUB-FEEDER PILLAR FOR PROCESS AREA (IMPORT) (S.F.P-2)

Supply, installation, testing & commissioning of External Lighting Panels double door, compartmentalised & slanting roof (300mm extended), suitable for 3 phase, 4 wire, 415Volt, 50Hz, AC supply, totally enclosed free standing , weather and vermin proof outdoor type fabricated from 14 SWG CRCA sheet steel with aluminium busbars ,earth bus, lockiing arrangement, gland plate complete as required including associated civil works like excavation, brick work, plaster and providing & fixing below noted accessories and with following incoming & outgoings:

cubicle board sholud be made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 150A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

8 Nos. 32A DP MCB.

SUB-FEEDER PILLAR FOR PROCESS AREA (IMPORT) (S.F.P-3)

Supply, installation, testing & commissioning of External Lighting Panels double door, compartmentalised & slanting roof (300mm extended), suitable for 3 phase, 4 wire, 415Volt, 50Hz, AC supply, totally enclosed free standing , weather and vermin proof outdoor type fabricated from 14 SWG CRCA sheet steel with aluminium busbars ,earth bus, lockiing arrangement, gland plate complete as required including associated civil works like excavation, brick work, plaster and providing & fixing below noted accessories and with following incoming & outgoings:

cubicle board shoukd be made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 125 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

4 Nos. 32A DP MCB.

MAIN FEEDER PILLAR - 6 FOR PROCESS AREA (EXPORT)

Supply, installation, testing & commissioning of External Lighting Panels double door, compartmentalised & slanting roof (300mm extended), suitable for 3 phase, 4 wire, 415Volt, 50Hz, AC supply, totally enclosed free standing , weather and vermin proof outdoor type fabricated from 14 SWG CRCA sheet steel with aluminium busbars ,earth bus, lockiing arrangement, gland plate complete as required including associated civil works like excavation, brick work, plaster and providing & fixing below noted accessories and with following incoming & outgoings:

cubicle board should be made from 2mm thick CRCA sheet dust & vermin proof duly phosphatized & powder coated inclusive of 300 A 4 strip Al. Busbar complete with interconnection pdg. Lugs, inter-earthing, painting, providing and fixing following switchgears including connection, interconnection as required:

INCOMING :

OUTGOING :

1 Nos. 63A TP MCCB 36 kA with thermal magnetic O/L & S/C release & handle.

8 Nos. 32A DP MCB.

HT / LT INDOOR SUBSTATION, LT PANELS AND CABLES-SUB HEAD

Supplying, installation, testing & commissioning of two pole structure for receiving 11KV supply SEB meter with 11 KV , 3 pole, Gang operated switch along with drop out fuse and L.A etc. Complete as required

11 KV H.T. PANEL :(VCB PANEL BOARD)

Supplying, installation, testing & commissioning of indoor type floor mounted metal clad, 11 KV VCBs, panel with 4 nos VCB, totally enclosed & fully interlocked, horizontal drawout, horizontal isolation type breaker as per IS 13118, as amended up to date having capacity as mentioned below, single break, trip free mechanism, manual charged and auto/manually closing breaker suitable for use on 11 KV, 3 Phase, 50Hz A.C. supply with short circuit fault level of 350 MVA complete with self contained, fully interlocked ,rack in and rack out mechanism, PVC insulated copper bus bars of 630 Amps capacity, breaker featured with mechnical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 4 NO+4 NC and equipped with following switchgears and accessories i/e connections suitable for 3x240 sqmm. XLPE 11 KV aluminium cable (cable entry from bottom / top as per site condition) , end termination with heat shrinkable jointing material etc. as required.(Note:- cost of end termination not included in this item.)

Incoming - 2 No. EDO type 630 Amp VCB with mechnical interlocking arrangement the following

2 No - Microprocessor based IDMT numerical relay with O/L, E/F and S/C protection.

4 Nos. - set of dual core dual ratio 3 CT's 300/150/5/5 A of 15 VA burden and accuracy class - 0.5 for metering and class 5P10 for protection.

2-Trip free 230V AC, motor charged spring release closing mechanism complete with necessary auxiliary switches emergency hand trip device and mechanical 'OFF' and 'ON' indicator.

2 - 24 volts DC shunt trip coil

2- Strip heater with thermostat to prevent absorption of moisture

2 - Electro mechanical Master trip relay (86)

2 - Electro mechanical Anti pumping relay (94)

2 - Trip Circuit supervision relay.

2 - no. circuit breaker control switch for electrical (T/N/C)

2- push button on front door for emergency trip

2- set of Red/Green indicating lamps for close and open position

2- Amber indicating lamp for auto trip

2- clear indicating lamp for trip circuit healthy

2- set of white indicating lamps one per phase

2 - blue indicating lamp for spring charged

Outgoing -2 Nos EDO type 630 A VCB extendable type with the following

2 Nos - Microprocessor based IDMT numerical relays with O/L, E/F & S/C protections.

2 No. - set of dual core dual ratio 3 CTs 100/50/5/5 A of 15 VA burden and accuracy class-1.0 for metering an class 5P10 for protection.

2 - Electro mechanical Master trip relay (86)

2 - Electro mechanical Anti pumping relay (94)

2- Trip Circuit supervision relay.

2 - set of electro mechanical auxiliary relay for Transformer

2- set Electro mechanical auxiliary relay for transformer fault ALARM for winding temperature conditions (63x)

2 - no. circuit breaker control switch for electrical (T/N/C)

2- Amber indicating lamp for auto trip

2- clear indicating lamp for trip circuit healthy

2- set of white indicating lamps one per phase

2 - blue indicating lamp for spring charged

Supplying, Installation, testing and commissioning of the following for metering and protection

Lead acid 24V storage battery of suitable ampere hour capacity suitable for 11 KV panels in HT panel room.

Float trick charger suitable for above items for 30 volts DC

DC distribution board suitable for above application including tripping, closing and indication etc.,

Control cabling between DC distribution panel to HT panel with cable size 4 core 2.5 sq. mm copper cable

control cabling between transformer and panel using armoured PVC insulated copper conductor of appropriate cores for indication and alarm etc.,as required.

TRANSFORMER (Indoor Type)

Supplying, installation, testing and commissioning of Cast Rasin Dry type 1600 KVA, 11/0.433 KV,3 Phase, 50 Hz Dyn 11 vector group , copper wound , class F insulation associated with winding temperature indicator , controller actuated by means of resistance tempertature detector embedded in LV winding , Indoor type transformer with approximately 5 % impedence tapping for off load operation on HV side , +5% to - 10 % having steps of 2.5 %, having cable end boxes on HV side suitable for 3 x 240 sqmm XLPE cable of 11 KV grade and 2500 amp bus trunking arrangement on LV side with neutral brought out separetly including supplying and laying of copper conductor multicore control cable from transformer to HT breaker for safety , tripping , suitably mounted on M.S canneli/c supplying and groutning of suitable M.S cannel with all accessories and confirming to IS 2026 / 11171 : 1985 with latest amendement and as per specification complete in all respects as required.

Supplying, installation, testing and commissioning of 1600kVA 9-12/11 KV HT, Oil Immersed, Naturally Cooled, On-Load, Stepless, Rolling Contact, Brentford Type Automatic Voltage Regulator as per technical specification complete in all respects

Supply of 3x240sqmm,aluminium coductor, 11 KV (E) armoured cables in Aluminium conductor as per IS 7098 (part-2) 1985 latest, and complete as per specifications.

DIESEL GENERATOR SET

Supply, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating set complying to CPCB -2 Norm alongwith having Prime Power Rating of following sizes, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system complete with the followings:

(a) Integrated DG Set controller for auto start , auto sync. And auto load sharing. (b) Adopter box with extended alluminium bus bar

Diesel Engine:

Diesel engine 4 stroke radiator type water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories

Engine mounted Instrument Panel fitted with and having digital display for following:

Start- Stop switch with key

Water temperature indication

Lubrication oil pressure indication

Lubrication oil temperature indication

Battery charging indication

RPM indication

Over speed indication

Low lub. Oil trip indication

Engine Hours indication

Alternator :

Synchronous alternator rated at 2 nos. of 380 KVA and 1 no of 125KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class- F/H insulation.

Base Frame & Foundation:

Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.

Fuel Tank:

Daily service fuel tank of 1000 liters capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications.

Exhaust System:

Dry exhaust mainfold with hospital exhaust silencer and catalytic convertor

Starting System:

12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries as required as per specifications.

Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications

Main LT Panel cum PLC Panel

Supplying, installation, testing and commissioning of cubicle type of LT panel suitable for 415 V, 3 Phase, 4 wire 50 HZ AC supply system having front surface area as per approved drawing fabricated in comparmentalized design from CRCA sheet steel of 2 mm thick , 3 mm thick for gland, plates including cleaning and finishing complete with 7 tank process for powder coating in approved shade, having 3200 Amp capacity extensible type TPN aluminium alloy bus bars of high conductivity, DMC / SMC bus bars of high conductivity, DMC / SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 sec, bottom base channel of MS section not less than 100 mm x 50 mm x5 mm at the rear with 2 nos. earth stud, solid connectons from main bus bar to switch gears with required size of Al. bus bars and control wiring with 1.5 sq. mm. PVC insulated copper conductor, cable alleys, cable gland plated in two half, including providing arc fire suppression system and compatible with auto-synchronisation through synce panel with following switch gears as required as per SLD and as per Specifications :-

(I) Incoming :

Each ACB incomer should be equipped with following accessorie (A) Breaker control switch (B) 1set of ON-OFF-TRIP ckt. Healthy. LED indication lights Spring charged indication. (C) 3Nos. phase indication LED lamps with 2Amp back up HRC fuse , breaker `On` indicating light with 2A HRC fuse , test terminal block set, fuses, circuits as per standard practice , auxilliary contacts for positive interlocking of the breakers. (D) Shunt trip coil 220V A.C (E) Multifunction meter with RS 485 (F) 1 No. 230 volt A.C.closing coil (G) Under voltage relay and Over voltage relay-1set (I) Auto/Manual switch

(F) Shunt trip coil 220V A.C (G) 2500/5A CT for APFC panel class-1 15VA (H) Multifunction meter with RS 485 (I) 1 No. 230 volt A.C.closing coil (J) Under voltage relay and Over voltage relay-1set

(E) 3Nos. phase indication LED lamps with 2Amp back up HRC fuse , breaker `On` indicating light with 2A HRC fuse , test terminal block set, fuses, circuits as per standard practice , auxilliary contacts for positive interlocking of the breakers as required . (F) Shunt trip coil 220V A.C (G) Multifunction meter with RS 485 (F) All the required accessorie and devices should be provided for proper operation/Syncronization of Solar power with the grid. (G) Reverse Power relay

(II) Bus Couplers :

1 Nos 2500 Amps horizontal four pole drawout type , EDO air circuit breaker of fault breaking capacity 50KA ( Ics=Icu upto 433V ) manually operated , with interlocked door , automatic safety shutters , mechanical ON/OFF and service /test/isolated position indicators and frame earthing contact conforming to IS 13947-2:1993 as amended upto date complete with following accessories. (a) Independent manual spring closing mechanism -1 No. (b) Breaker `ON` & OFF indicating light with back up 2A HRc fuse test termina block , fuses , circuits contactors for positive electrical interlocking of breaker , etc as required - 1 set (C) Shunt trip coil 220V A.C (D) 1 No. 230 volt A.C.closing coil (E) Auto/Manual switch

(III) Bus Bars:

TPN aluminium bus bars of minimum of 3200 Amps capacity with heat shrinkabe coloured sleeves and including DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 sec.

(IV) Interlocking:

(A) Electrical throuth advance contacts in ACB's (incomers & bus couplers) and mechanical (castel key) interloking should be provided to ensure that only one supply is available at a time on each section of bus and to eliminated any possibility of accidentally approaching two supplies at one bus section. (B) Electromechanical Interlocking between both transformer supply and DG set supply incomer.

1. Outgoing : (i) 630A 4P 50 kA MCCB - 3 Nos. (ii) 500A 4P 50 kA MCCB - 2 Nos. (iii) 400A 4P 50 kA MCCB - 4 Nos. (iv) 300A 4P 50 kA MCCB - 5 Nos. (v) 200A 4P 50 kA MCCB - 2 Nos. (vi) 160A 4P 50 kA MCCB - 5 Nos. (vii) 100A 4P 50kA MCCB-2 Nos.

(V) Arc Fire Suppression System: (i) Arc Monitor (1 no.) (ii) Extension Unit (1 no.) (iii) HMI Kit (1 no.) (iv) Detector cable (60 mtr)

(VI) PLC based DG Synchronizing Control panel

Design, fabrication, supply ,Installation, testing and commissiong of front operated cubicle type compartmentalised, rear access free standing, dust and vermin proof (IP 54 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 50 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications and Drawings/SLD, as required and as below.

2Nos. no volt monitors for DG supply

2 Nos. no volt monitors for main supply

1 No. PLC Comprising:

PLC (Allen Bradley/ siemens)

6 Nos. Power monitors

PLC rack

Digital input modes

Digital Output modes

EPROM (EP)

Man Machine interface (MMI)

Grafix Software for PLC

1 set mimic (SEM)

Set of Auxiliary relays

Set of indicating lights and push buttons

set of control MCBs

Communication cable from PLC to computer as per requirement

1 No. Auto-manual-semi auto & test switches

1 No. status indicator

1 KVA UPS

1 No. Auxiliary transformer (star/star)

1 No. printer A3 size

PC as per specifications ( Refer list of makes of materials)

Metering

Power & Energy monitor model (EM 6400 with RS- 238/485 port accuracy class 0.5)

Visual Indications & Control

1 set running

1 No. Emergency stop push button

1 No. Breaker close push button

1 No. Breaker trip push button

Annunciation

Annunciator with hooter, test, accept and reset Push button & Annunciate

Annunciator Inscriptions:

Solid state Annunciator (3 Nos. DG sets) for DG-1, DG-2 & DG-3

Inscription:

Electrical Fault

Excitation Failure

Reverse Power

Emergency Shutdown

Over speed

Low Lube oil pressure

High water temperature

Engine overheating

Bearing temperature high

Winding temperature high

Low fuel level

Exhaust quality

Spare

Spare

Spare

Spare

Solid state Annunciator (1 No.) for ASP

APFC Panel

Design, fabrication, supply ,Installation, testing and commissiong of front operated cubicle type compartmentalised, rear access free standing, dust and vermin proof (IP 54 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 3 wire 50 Hertz system suitable for a symmetrical fault level of 50 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications and Drawing/SLD as required and as below.

INCOMER

1 No. 630A TP MCCB (36 KA) .

METERING & INDICATION

1 set of phase indicating lamps

1 No. 12 step-Microprocessor APFC controller / Relay (Dual source purpose) shall continuously monitoring all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand, KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232/RS 485 port. Controller should mounted on the front side of the panel. Capacitor bank having 3 phase MPP based mix dieelectric low loss ISI marked power capacitor and provided with Electronic Thirstier based switching to suppress switching of inrush current and reducing harmonics capacitor life.

1 set of 630/5A, 15 VA, class-1 CTs for APFC relay

BUS-BAR

1 Set of 800A TP Aluminium Bus Bar with colour coded PVC Sleeves

Capacitor Bank

2No. 100 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.

2 Nos. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.

3 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.

2No. 10 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.

1 No. 5 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.

Each capaciotr bank should be provided with suitable rating MCCB/MCb circuit braeker

Note:The APFC panel shall also stipulate the following

(i) All the capacitors shall be suitable for 525 V

(ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided.

(iii) Heavy duty exhaust fans to be provided for cooling Thyristors.

(iv) LED indication for number of capacitor banks ‘ON & Power Factor lagging or leading.

(v) The APFC shall be protected from following

(vi) over-voltage & voltage unbalance

(vii) Over temperature-system should be in standby mode and automatically restart after above condition restored.

(viii) Total Harmonic Distortion

BATTERY AND BATTERY CHARGER: Supply, Installation, testing & commissioning of 30 V DC , 60 AH capacity the following lead acid batteries alongwith battery charger and accessories including control wiring for alarm and trip circuit in the M.S. conduit as per specification

D.C. DISTRIBUTION BOARD: Supply, Installation, testing & commissioning of cubicle type totally enclosed, floor or wall mounting fixed type D.C. Distribution board made out of 1.6 mm thick M.S. sheet complete with busbars and having following incoming and outgoing miniature circuit breaker complete as required.

Distribution board with 63 Amp DP MCB as incomer & 6 No 32 Amp DP MCB as outgoing.

Supply of 2 Core 2.5 sqmm 1.1 KV grade copper conductor PVC insulated and PVC sheathed armoured cable confirming to IS 1554 (Part - I ) 1988.

Supply & making end termination with brass compression glands & aluminium lugs for PVC insulated and PVC sheathed copper conductor cable of 1.1 KV grade of2 core , 2.5 sqmm. sizes as required.

SAFETY EQUIPMENTS-SUB HEAD

Providing and fixing carbon dioxide (CO2) type fire extinguishers conforming to IS 2878 - 1976 and cylinders fully charged of 4.5Kg capacity.

Supply and fixing of foam fire extinguishers, Portable type 9 litre capacity hanged on wall with bracket complete as required.

Supply and fixing safety instruction chart in word duly framed with 5 mm thick glass as required. (approx. front area 1.20 sq.mt.)

Providing of set of 4 nos. 9.5 litre capacity GI bucket painted in post office red colour with prior coat of red-oxide paint and written with white paint 'FIRE' and mounted on M.S. angle iron frame with bracket of appropriate size and capacity including filling sand etc.

Providing First Aid Box as approved by St. John Ambulance Brigade / Indian Red Cross conforming to IS 2217-1963.

Supply and fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required (approximate front area 1.20 sq.mt.)

Providing of rubber mat 1 mtr. wide and 12 mm thick to withstand 11 KV dielectric strength as per IS 5424-1969.

Providing of rubber mat 1 mtr. wide and 6 mm thick to withstand 3.3 KV dielectric strength as per IS 5424-1969.

Supplying 11KV grade rubber gloves as per IS.

PUBLIC ADDRESS SYSTEM-SUB HEAD

Supply, installation, testing and commissioning of 8 zone IP based, digital Voice Alarm controller expandable upto 128 zones. The voice alarm controller should be able to connect directly over Ethernet. It should have functions like the audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover, it shall comply to EN 54-16 guidelines and shall be capable of monitoring the circuitary as per the evacuation norms. The Voice alarm controller should also have the following functions: 1) 255 Priorities 2) Time schedule broadcasts 3) Its own PTT microphone 4) Capable of amplifier redundancy 5) 8 trigger inputs/outputs in each controller

Supply, installation, testing and commissioning of integrated Audio source with the following features : 1)Two single Bluetooth\USB\SD and DAB\FM line outputs can play music applications in two areas. 2) The volumes of the two line outputs can be adjusted separately. 3) Bluetooth\USB\SD has three play modes: single play, all play and repeated play. 4) DAB\FM can preset 10 channels of programs.

Supplying, installing, testing and commissioning of Network resource interface having features: Provides 4 AUX balanced audio input for digitalization of the external analog audio source and routing to the network Built-in 4G SD card as internal audio source with 4 Ethernet interfaces allow communication of multiple controllers and has 32 x dry contact control inputs and input faults can be monitored.

Supply, installation, testing and commissioning of 1X500W Class-D Amplifier with 1 independent channel with 500 Watts of power (total 500W) and can provide automatic re-settable overcurrent, overload, overheating, overvoltage & under-voltage

Supply, installation, testing and commissioning of 2X250W Class-D Amplifier with 2 independent channels and each channel with 250 Watts of power (total 500W) and can provide automatic re-settable overcurrent, overload, overheating, overvoltage & under-voltage

Supply, installation, testing and commissioning of 6W Ceiling Speaker with max SPL1M/1W 95dB . Frequency response of 125Hz-16KHz with a dispersion angle of 160 deg or more. The speaker should have tappings at 6W/3W/1.5W

Supply, installation, testing and commissioning of 6W Wall Speaker with max SPL1M/1W 95dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160 deg or more. The speaker should have tappings at 6W/3W/1.5W

Supply, installation, testing and commissioning of 30W Horn speaker suitable for outdoor installation also with max SPL1M/1W 106dB . The speaker shoud have tappings at 30/15W/7.5W.

Supply and installation of 80mm dia 8 mtr high GI Pole complete with foundation and civil works for Installation of outdoor Horn type speakers.

CCTV SYSTEM-SUB HEAD

IP CAMERAS ( For Indoor Use ): Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Rugged Dome Camera, 1/2.7" CMOS, 2 MP @ 60fps, triple stream, Min. Illumination required 0.01 lux @ F1.6 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 2.7–12 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, 3 IR LEDs Smart IR with upto 50m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.265 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant, Valid Cyber Secuirty Certificate.

For Underground Parking & Main Entry/Exit Gates: Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Bullet Camera, 1/2.7" CMOS, 2 MP @ 60fps, triple stream, Min. Illumination required 0.01 lux @ F1.6 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 2.7–12 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, 4 IR LEDs Smart IR with upto 60m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant,Valid Cyber Secuirty Certificate

IP SPEED DOME CAMERA (For Indoor & Out Door Parking, Roads, Entrance): Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR PTZ Camera with auto tracking, 1/1.9" CMOS, 2 MP @ 25fps, triple stream, Min. Illumination required 0.005 lux @ F1.6 (color) & 0.0005 lux @ F 1.6(B/W), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream, 6mm –180 mm 30x motorized focus & zoom lens, BLC, HLC, 3DNR, Defog, Electronic Image Stabilitzation, Privacy Mask, IR range with upto 200m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 7 In/ 2 out, PoE, H.264 High Profile and MJPEG, PoE Class 5 and 12V DC/24VAC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 70° C. Certifications: ONVIF Profile S compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant.

Supply and installation of 80 mm dia 8 mtr high GI Pole complete with foundation and civil works for Installation of outdoor Cameras

Supply, Installation, Testing & Commissioning of Power Supply for PTZ cameras with surge protector..

DATABASE MANAGER, VIDEO MANAGEMENT SOFTWARE: Supply, Installation, Testing & Commissioning of Network Video Management & Monitoring Software (NVMMS) system with distributed architecture to collect, manage and present video from all the cameras and supports emerging technologies in the industry, like 4K resolution, H.265 video compression codec, multi-imager/lens cameras and 360° fisheye cameras. NVMMS shall have option to support database redundancy and 1+1 and N+M NSM failover features for unforeseen/maintenance scenarios for increased system reliability NVMMS shall support NSM's from a multiple location licenced for 300 cameras & 8 users clients. The NVMMS should support network joystick controller, GPU rendering support for H.264 and H.265 decoding , video on demand, Adaptive video throttling, rule engine, operatore role management, server based Video Motion Detection (VMD), edge storage backfill support, bookmark with manual comment, bookmark based search, timeline search, Preview search, synchronous playback from all NSMs, monitor wall support, surrounding camera mode, Cybersecured with features such as Digital Signing, General Data Protection Regulation (GDPR) compliance, HTTPS & SSL base, smart web client, secured firewall configuration, password expiry, non-recoverable password; support ANDROID & iOS phones, seamless integration with intgegrated security platform which provides HSDK&API for further integration with 3rd party systems. NVMMS shall support iLIDS certified Analytics like intrusion/LoiteTrace.

NVMMS shall be running on workstation/PC with minimum Intel Core i7-6700, 3.4GHz, 8GB RAM, Windows 10 (64 Bit) OS, DVD R/W, Integrated Intel HD graphics 530 and NVIDIA Quadro NVS 315 1 GB PCIE x 16 LP supporting 4 Monitors. The NVMMS shall be complete system for satisfactory surveillance operations with all necessary softwares, licenses, required PC Hardware, Storage, accessories etc., civil, electrical works & peripheral items, as required as per specification in Annexure A at site of work inline with the Engineer in Charge instructions.

NETWORK VIDEO RECORDER AND STORAGE: Supply Installation Testing & Commissioning of Network Storage Manager (NSM) supporting ONVIF Profile S & G, PSIA, real time streaming protocol (RTSP) standards, emerging technologies in the industry, like 4K resolution, H.265 video compression codec, 3D PTZ control, 360° Fisheye camera and multi-imager/lens camera support, and intelligence events. System proposed shall have scalability of 4 to 128 cameras per NSM with sufficient licenses to record all the cameras in this requirement. Must Supply 128 Channel License. NSM shall support simultaneous recording, live monitoring, playback/search of recorded video for up to 4K resolution on all cameras, taking snapshots and viewing presets for PTZ cameras and system management. NSM shall have integrated Dashboard to easily monitor the health and recording status, Flexible retention time / archive time for cameras, Smart Motion detection, Role-based operator privileges supporting Windows and local users, Video Archiving, Multi-stream support, Advanced security features with encryption support for communication between desktop client to NSM and secure https login for Web Client and Mobile apps, Event history and operator log reporting with export to PDF, Crystal Reports, MS Excel/MS Word. NSM Shall support scheduled backfilling of the recordings from the edge storage / SD card of cameras to the NSM using ONVIF Profile G for robust recording against temporary network failure, N+1/N+M recorder failover and failback automatically or manually to have maximum system uptime and recording continuity.

NSM shall have Intel® Core™ i7-4790, 3.6 GHz or better, Mnimum 8GB RAM, DVD-R/W, 6 GB/s SAS/SATA RAID Card, 2 NIC cards supporting network throughput of 256 Mbps/425 Mbps for Incoming/outgoing, Graphics Adapter - Intel® HD Graphics 530, 4600, or equivalent for local client GPU rendering support, Windows Server 2012 R2 (64-bit OS versions recommended) / Windows 10, Microsoft SQL Express 2012. The NSM shall be complete system for satisfactory surveillance operations with all necessary softwares, licenses, required PC Hardware, Storage, accessories etc., civil, electrical works & peripheral items, as required as per specification in Annexure A at site of work inline with the Engineer in Charge instructions. The System should have 120 TB Storage.Storage must to calculated for 30 days of recording based on 2MP, 25fps on higher native resolution.

WORKSTATION WITH CLIENT LICENCE: Supply, installation, testing & commissioning of the workstation shall have the following specifications:- Processor Intel ® i7 3.6 GHz with internal memory of 8 GB RAM. Windows® 10 Professional 64-bit. NVIDIA 2GB Independent Graphic Card. Resolution support for cameras 2560 x 1600 display resolution capable and DirectX true colour 32 bit. Dual Link VDI outputs, Integrated Intel UHD graphics 630 and NVIDIA Quadro P620.

Supply, installation, testing & commissioning of 55" Flat LED Color Monitors.

Supply, installation, testing & commissioning of Network Joystick for controlling PTZ cameras.

Supply, installation , testing & commissioning of Layer II Managed Gigabit Ethernet switch: switch with 8 x 10/100/1000T PoE ports and 2 x 100/1000X SFP ports.

Supply, installation , testing & commissioning of Layer II Managed Gigabit Ethernet switch: switch with 16 x 10/100/1000T PoE ports and 2 x 100/1000X SFP ports.

Supply, installation , testing & commissioning of Layer II Managed Gigabit Ethernet switch: switch with 24 x 10/100/1000T PoE ports and 4 x 100/1000X SFP ports.

Supply, installation , testing & commissioning of Layer III Managed Gigabit Ethernet switch: 24-port 100/1000X switch with 4x10G SFP+ uplink ports with dual Power Supply Complete

1000BaseLX (10km) SFP (10km with SMF, 1310nm)

1000BaseT SFP (100m with UTP)

Supply, installation, testing and commissioning of following Category 6 fully loaded jack panel duct assembly, screws, washers and an instruction sheet for termination of incoming pairs.

8 port Jack Panel

16 port Jack Panel

24 port Jack Panel

12 Port LlU Loaded (SM) with pigtails, couplers & necessary accessories.

24 Port LlU Loaded (SM) with pigtails, couplers & necessary accessories.

Supply, installation & testing of 7ft or higher Fibre Patch Cord

Supply, installation & testing RJ-45 I/O complete with face Plate and back-box

Supply, installation & testing of CAT-6 Patch Cord 3 ft.

Supply, installation & testing of CAT-6 Patch Cord 7 ft.

Supply, installation & testing of 16 Way SPN DB including 16 Nos Single Pole 6A MCB, 1 No. 20 A 2 Pole MCB complete with all accessories, For UPS single phase power to field devices.

Supply, fixing & testing of 19 inch rack mount console unit - Floor Mounted 42 U including PDU, cable Manager etc. with 4 cooling fans on top and bottom at control room.

Supply, fixing & testing of 19 inch rack mount console unit - 9U Floor Mount IP 66 rated wheather proof encloser for Layer 2 switches including PDU, cable Manager etc.

Supply, fixing & testing of 19 inch rack mount console unit - 6U Wall Mount for Layer 2 switches including PDU, cable Manager etc.

Supply, laying & testing of Cat-6 23 AWG UTP cable with all termination crimping etc. in exiting conduit.

Supply, laying & testing of 12 Core Armoured SM Fiber optic cable complete with all terminations

Supply, laying & testing of 6 Core Armoured SM Fiber optic cable complete with all terminations

Supply, laying & testing of 3C x 1.5 sqmm Armoured Copper Power Cable for powering the PTZ cameras

Supply, laying & testing of 3C x 2.5 sqmm Unarmoured Copper Power Cable in existing Conduit for distribution of UPS Power Supply.

Supply and Laying of 25mm dia GI flexible conduit complete with all accessories

Supply and Laying of 20mm dia GI flexible conduit complete with all accessories

Supply and Laying of 300X40X1.6mm GI Raceway With cover complete with all accessories

FIRE DETECTION & ALARM SYSTEM-SUBHEAD

Supply, installation, testing and commissioning of Analog Addressable Fire Alarm Control panel with battery back up for 24 hours normal operation and 15 minutes alarm operation. The control panel, battery charger etc, shall be UL listed.The panel shall be with 8 loop capacity and shall be expandable upto 10 loop. The Fire Alarm Control Panel shall include a full featured operator interface control and annunciation panel that shall include a backlit 640-character liquid crystal display, individual, color coded system status LEDs, and an alphanumeric keypad for the field programming and control of the fire alarm system. Each module shall support a maximum of 256 analog/addressable devices with 10% spare capacity.

Cost for addition / deletion of extra Loop cards in to the panel mentioned above.

Supply, Installation, Testing & Commissioning of active Repeater Panel with a 640-character Liquid Crystal Display (LCD) and alphanumeric keypad for field based operation and for monitoring the Fire Alarm System. This shall provide the event and programmed custom messages as displayed on the main panel, the repeter panel shall be connected on peer to peer basis. The panel shall be UL listed and FM approved.

Supply,Installation,Testing & Commissioning of Analogue Addressable Flash scan multi-sensing, low-profile detector with self acclimatising type having hard addressing system with standard base and junction box. The detector shall be capable to address in the range of 1-159 or better. The detector shall be with Visible bi-color LEDs for 360 deg viewing and shall blink green every time the detector is addressed, and illuminate steady red on alarm.

Supply,Installation,Testing & Commissioning of Analogue Addressable Flash scan Rate - of - Rise thermal detetor having Rotary, decimal addressing system with standard base and junction box. The detector shall be capable to address in the range of 1-159. The detector shall be with Visible bi-color LEDs for 360 deg viewing and shall blink green every time the detector is addressed, and illuminate steady red on alarm

Supply,Installation,Testing & Commissioning of Response indicator for all detectors located above false ceiling

Supply,Installation,Testing & Commissioning of Analogue Addressable Fault isolator module capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected. Fault Isolator Module should not occupy any address.

Supply,Installation,Testing & Commissioning of Analogue Addressable Control module system and shall be capable of providing DPDTcontact rated at 24V DC, 2A.

Supply,Installation,Testing & Commissioning of Analogue Addressable Monitor module having system for monitoring the field devices & shall be capable of providing DPDTcontact rated at 24V DC, 2A.

Supply,Installation,Testing & Commissioning of Analogue Addressable Control relay module having Rotary, decimal addressing system for AHU tripping and shall be capable of providing DPDTcontact rated at 24V DC, 2A.

Supply,Installation,Testing & Commissioning of Horn / Strobe rated at 82 dBA @ 3m for Audible annunciation and 75cd flashintg at 1 Hz for visual indication.

Supply,Installation,Testing & Commissioning of Addressable UL Listed Break Glass Manual Call Point with hard addressing system and having an integrally mounted addressable module that monitors and reports contact status.

TELEPHONE SYSTEM-SUB HEAD

Supplying, installing, testing and commissioning of IP Based ISDN EPABX system equipped with 16 analog CO trunks, 1 ISDN PRI Circuit (30 Channel), 18 high-end Analog phones and 110 Analog phones as per TS. The system has to be expandable to 200 lines with minimum 32 party audio conference bridge by using same set of control card and CPU.

Supplying, installing, testing and commissioning of PC Based operator consol system along with handset & mic.

Supplying, installing, testing and commissioning of Type-II Analog Telephone sets as per TS.

Supplying, installing, testing and commissioning of Type-I Analog Telephone sets as per TS.

Supplying, installing, testing and commissioning of 200 pair IDF complete LSA Plus disconnection module, back mounting frame & wire manager on good quality powder coated MS Box with lock & key.

Supplying, installing, testing and commissioning of 100 pair IDF complete LSA Plus disconnection module, back mounting frame & wire manager on good quality powder coated MS Box with lock & key.

Supplying, installing, testing and commissioning of 5 pair IDF complete LSA Plus disconnection module, back mounting frame & wire manager on good quality powder coated MS Box with lock & key.

Supply of Armoured polyethylene jelly field telephone cable for outdoor cabling of following size "-

a) 5 Pair 0.5 sqmm

b) 50 Pair 0.5 sqmm

c) 100 Pair 0.5 sqmm

Supply, fixing & testing of 19 inch rack mount console unit - Floor Mounted 42 U including PDU, cable Manager etc. with 4 cooling fans on top and bottom at control room.

Supplying, installing, testing and commissioning of 19", 15 U Wall mount rack with power distribution board.

Supplying, installing, testing and commissioning of 12 port Wall mount LIU complete with adaptor.

Supplying, installing, testing and commissioning of 24 port Rack mount FMS complet with SC adoptor, adaptor panel.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface / recessed Steel /PVC conduit as required.

Supply of 6 core Armoured Single mode OFC

Supply of 24 core Armoured Single mode OFC

Supply of 40 /33 mm dia PLB HDPE Duct

Supply of 50 /42 mm dia PLB HDPE Duct

Laying of 6 Core and 24 Core OFC for outdoor

Laying of 40/33 & 50/42 mm dia PLB HDP duct including with excavation and back filling

Laying of Armourd Polythene jelly field telephone cable in existing HDPE pipe in the ground.

Supplying, installing, testing and commissioning of Cat 6 modular IP Based RJ 45 I/O jack with face plate.

Supplying, installing, testing and commissioning of Layer 3 Ethernet Routing Switch with minimum 12 SFP ports.

Supplying, installing, testing and commissioning of Layer 2 Ethernet POE Switch with 24 10/100/1000 PoE Port, 2 Combo10/100/1000 SFP Ports.

Supplying, installing, testing and commissioning of 1 port 1000 BASE Ethernet access Switch PoE PWR with 8 10/100/1000 PoE Ports with 2 SFP Ports.

Supplying, installing, testing and commissioning of Cat 6 Modular Jack Panel

Supplying, installing, testing and commissioning of Cat 6 UTP Patch Cord. (2 Mtr.)

Supplying, installing, testing and commissioning of Cat 6 UTP Patch Cord. (1 Mtr.)

Supplying, installing, testing and commissioning of fusion Splices in complete with specification.

Supplying, installing, testing and commissioning of SC to unconnectorised fiber pigtail.

Supplying, installing, testing and commissioning of SC to LC fiber patch cord.

Supplying, installing, testing and commissioning of 3 KVA online UPS with battery back up having 8 nos 12 V/65 AH SMF battery

Supplying, installing, testing and commissioning of 3 maintenance free earth system as per technical specifications

EQUIPEMENTS & SYSTEMS-SUB HEAD

COLD STORGAE

Supply, installation ,testing and commissioning of Refrigeration for cold storage having size of each chamber 10.0mtr x 7.8 mtr x 7.0 mtr (2Nos Chamber-each of 150 MT) for Fruits & Vegetables using ammonia as refrigerant, refrigeration system shall be suitable for temp. range of 0 C to + 2 C, Comprising of Reciprocating Refrigeration Compressor, Oil Seperator, Evaporative Ammonia Condenser, Ammonia Receiver, Air Cooling Units, Ammonia Valve & Fittings, Ammonia Pipes & Fittings, G.I. Pipes & Fittings, Temperature meters, Electrical Motors & Electrical Panel complete as per specification and meeting with the technical requiment as complete. the item includes as per following:

i) providing and fixing thermal insulation with puff panel for cold storage of size 10.0mtr x7.8mtr x 7.0 mtr (2 Nos chamber) ii) Puff Sandwich panels for all walls having thickness of 100 mm with prepainted 0.5 mm thick G.I. Sheet on both sides. Chemical denisity of puff insulation to be 40 kg/m2 (+ -5%) including jointing of Puff panel with cam lock & silicone etc. iii) 60 mm puff sheet insulation of the floors of the cold storage but without kota stone, masonary & labour. iv) Insulation of cold storage room door of size 1mtr x 2mtr 50 mm thick i/c frame, handle, hinges & locks (3 Nos).

Supply, installation, testing & commissioning of Weigh bridge 80 T capacity (Pitless Type) including control panel, cabling, Remote display & associated civil work (i.e excavation, foundation etc.) complete in all respect as required .

Supply, Installation, testing and commissioning (through OEM or their authorised dealer and installation report to be furnished) of High Wall Mount type dual Inverter Split AC units of 1.5 TR capacity with R-32 refrigerent, rotary compressor, copper aircooled condensing unit with cooling coil ,having anti corrosion coating, fan motor and indoor unit(the copper coil of indoor unit also have anti corrosion coating) complete with filter section, cooling coil of copper tubes with aluminium fins, electric motor, fans, including 3 metres of suction refrigerant pipes with insulation and 3 metres of discharge refrigerant grade copper pipes, including all accessories and controls etc., stabiliser of 4kVA capacity of repute make, as per the specification and direction of engineer -in-charge. (The External unit will be mounted on wall/ surface as per site condtion with proper grouted angle iron frame of size 50 mm. x 50 mm. x 5 mm. duly painted.) Note :- Total 05 yrs. of waranty is required on compressors of split AC from OEM.(Five star rating). The compressor should be of OEM

Supply, erection, testing and commissioning of refrigerant grade copper piping between indoor and out door units of suitable size for discharge line without insulation including all fittings,accessories etc., for 1.5 TR capacity High wall mount type AC units complete all as specified and/or directed. NOTE : Item Includes cost for cutting the chase and making it good in all respect wherever required and as per the direction of Engineer-in-Charge. Note: Only the extra length of refrigerant pipe used over and above the 4 mtrs length supplied with the AC unit will be measured and paid under this item.

Supply, Installation, testing and commissioning of refrigerant grade soft copper pipe of( 6.4/12.5mm) between indoor and out door units for suction line with 13mm closed cell Nitrile Rubber (Class O) insulation including all fittings, accessories etc., for 1.5 TR capacity High wall mount type AC units complete all as specified and/or directed. Note-1 : Item Includes cost for cutting the chase required and as per the direction of Engineer-in-Charge. Note-2: Only the extra length of refrigerant pipe used over and above the 4 mtrs length supplied with the AC unit will be measured and paid under this item.

Supply, Installation, testing and commissioning of PVC heavy duty rigid pipe of 25mm dia with 6mm closed cell Nitrile Rubber (Class O) for codensate water drain from the split AC units with necessary fittings etc., all as specified and / or directed etc.,complete. (The outlet pipe to be fitted upto nearest rain water pit). NOTE : Item Includes cost for cutting the chase as per the direction of Engineer-in-Charge.

Wiring and conncetion between Indoor and Outdoor Unit of 1.5TR Inverter Split AC unit with 2.5X4Sq.mm PVC insulated and PVC sheated Cu cable including PVC conduit and all accessories

Bidder Name

Amount

K S M BASHIR MOHAMMAD AND SONS(GSTN-09AAEFK3277F1Z9)

BRIDGE AND ROOF COMPANY INDIA LTD.(GSTN-19AABCB3166E1ZW)

Dineshchandra R Agrawal Infracon Pvt. Ltd.(GSTN-24AABCD9523D1Z0)

BSR INFRATECH INDIA LIMITED(GSTN-NA)

Bidder Name

Amount

K S M BASHIR MOHAMMAD AND SONS(GSTN-09AAEFK3277F1Z9)

BRIDGE AND ROOF COMPANY INDIA LTD.(GSTN-19AABCB3166E1ZW)

Dineshchandra R Agrawal Infracon Pvt. Ltd.(GSTN-24AABCD9523D1Z0)

BSR INFRATECH INDIA LIMITED(GSTN-NA)

Dineshchandra R Agrawal Infracon Pvt. Ltd.

BSR INFRATECH INDIA LIMITED

BRIDGE AND ROOF COMPANY INDIA LTD.

Dineshchandra R Agrawal Infracon Pvt. Ltd.

BRIDGE AND ROOF COMPANY INDIA LTD.

BSR INFRATECH INDIA LIMITED

Dineshchandra R Agrawal Infracon Pvt. Ltd.

BRIDGE AND ROOF COMPANY INDIA LTD.

BSR INFRATECH INDIA LIMITED

BRIDGE AND ROOF COMPANY INDIA LTD.

Dineshchandra R Agrawal Infracon Pvt. Ltd.

BSR INFRATECH INDIA LIMITED

BSR INFRATECH INDIA LIMITED

Dineshchandra R Agrawal Infracon Pvt. Ltd.

BRIDGE AND ROOF COMPANY INDIA LTD.

Dineshchandra R Agrawal Infracon Pvt. Ltd.

BSR INFRATECH INDIA LIMITED

BRIDGE AND ROOF COMPANY INDIA LTD.

Dineshchandra R Agrawal Infracon Pvt. Ltd.

BSR INFRATECH INDIA LIMITED

BRIDGE AND ROOF COMPANY INDIA LTD.

BSR INFRATECH INDIA LIMITED

BRIDGE AND ROOF COMPANY INDIA LTD.

Dineshchandra R Agrawal Infracon Pvt. Ltd.