Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.6 LAccepted-AOC | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹30.0 L+₹21,446.60 (0.72%)Rejected-AOC | L2 | Rejected-AOC Other than L1 | |
| 3 | L3₹30.1 L+₹35,288.60 (1.19%)Rejected-AOC | L3 | Rejected-AOC Other than L1 | |
| 4 | L4₹32.1 L+₹2.4 L (7.99%)Rejected-AOC 23 8 SANJAY COLONY AKHNOOR 181201 JAMMU KASHMIR | AKHNOOR | JAMMU | JAMMU KASHMIR | 181201 | L4 | Rejected-AOC Other than L1 |
Tender Value
₹40.1 L
EMD Value
₹80,140
Closing Date
26 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer (North) Akhnoor- 181201 C/o 56 APO
SPL REPAIR TO BLDG NO P-35 ALONGWITH OTHER MINOR WORKS AT VARIOUS LOCATIONS IN AKHNOOR UNDER GE (N) AKHNOOR
2023_MES_634799_1
CANO- GE(N)/AKH-55/2023-2024
Open Tender
Support/Maintenance Service
Item Rate
180 days
Akhnoor
Class D Category a(i)
9 documents required · 9 mandatory
₹500
GE (N) Akhnoor
₹80,140
Yes
6 Mar 2024
29 Dec 2023
2 Feb 2024
29 Dec 2023
26 Jan 2024
12 Jan 2024
Amount
Taking down old unsv roof treatment including PCC padding if any, plastering, removing existing bitumen felt treatment including brushing, cleaning top surface of roof slab, brooming etc complete all as specified and as directed.
Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface fair and even on roof slab complete all as specified and as directed.
Roof treatment :- Water proofing treatment to RCC roof slab including parapet as under :- (a) Ist Course : Apply a coat of bituminous primer conforming to IS-3384@ 0.40 Kg /Sqm on prepared surface of plaster and after drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm on plastered surfaces. (b) 2nd Course : APP (Atactic Polypropylene) modified polymeric membrane, 5 layered, 3 mm thick weight not less than 3.0 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 150 mm end overlap, membrane has to be laid with LPG torch and overlap sealed and finished neat, all joints. (c) 3rd Course : Apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm over membrane and dusted with dry sand @ 0.50 to 1 Kg/sqm. (i) On Non-accesible roof : After providing (a) to (c) provide aluminium paint as per manufacturer instructions. contd to item No-3.01
(ii) Coved fillet in PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) of required radius 75mm shall be provided at the junction of roof and vertical surface such as parapet wall/mumty around opening and treatment mentioned above shall be applied followed by a cement plaster 20mm thick in cement mortar(1:6). Note : (i) Roof treatment work shall be carried out through approved manufacturers only or through their authorised personal only.
Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etccomplete all as specified and as directed.
Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.
Rendering 10 mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and as directed.
Applying 1mm thick wall care putty over newly plastered / old plastered surfaces of wall, complete all as specified and as directed.
Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement, complete all as specified and as directed.
Complete removal of exising treatment of old wall surfaces and applying two coats of cement base paint complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.
Preparation of newly plastered surfaces of ceiling and apply three coat of white wash, complete all as specified and as directed.
Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed.
Repair to balcony/facia and soffit of chajjas etc by taking down old plastered surfaces & applying rendering 15 mm thick dubbing coat where required to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm in width or girth including formwork/scaffolding work upto height 6.5mtr above ground level of bldg complete all as specified and as directed.
Demolition of RCC water tanks (of any capacity measured in cum not in number ) , RCC cooking platform (slab) , chimneys concrete of any description in any position not otherwise specifically provided for cement concrete, complete all as specified and as directed.
Reinforced cement concrete nominal mix Type B-0 1:2:4 (12.5 mm graded crushed stone aggregate) for cooking platform , slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and as directed.
Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished surfaces of concrete, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) in floors etc area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm. Set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and as directed.
Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick back coat layer plaster in cement mortar 1:4,complete all as specified and as directed.
Machine cut kota stone slab flooring 18-20mm thick as in riser of steps, skirting, dado and pillar, jointed and pointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete laid over & including 20 mm thick in CM 1:3 screed for laying Kota Stone, complete all as specified and as directed.
Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed.
Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 01 Nos 25x3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 (Using 12.5mm, graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified and as directed.
Factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and as directed.
Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing,complete all as specified and as directed.
PCC 1:3:6 type C-0 (using 12.5 mm graded crushed stone aggregate) as in copings, hold fasts, plinth band, bed blocks, benching and like slightly rounded or chamfered angles including necessary form work, complete all as specified and as directed.
PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed.
30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
30 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) ccomplete all as specified and as directed.
150mm mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed, complete all as specified and as directed.
100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and as directed.
Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed.
150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed.
Hasp and staple safety type of size 100mm, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed.
Aluminium handles cast type anodised of size 75mm long ISI marked complete all as specified and as directed.
300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.
Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & glazed shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 . Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid seperately under respective item
Description all as per Item No.38 above, but only fixed glass pane shutter without glazing bars.
Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.
04 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed.
Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,anodised,with hard drawn steel spring,fixed in bottom body of door complete all as specified and as directed.
20 mm dia stainless curtain road complete with stainless bracket and side caps fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screw fixed in repairs, complete all as specified and as directed.
Preparation new steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and as directed.
Preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of Ist quality over a coat of pink primer, complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Providing cement concrete type C-1, 1:3:6 ( using 20mm graded crushed stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight), complete all as specified and as directed.
Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, Three layered (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed.
Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc., complete all as specified and as directed.
Mild steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
Mild steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
15mm bore Stop valve cast copper alloy screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and as directed.
20mm bore Stop valve cast copper alloy screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and as directed.
Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and as directed.
PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections fixed in repairs, complete all as specified and as directed.
Vitreous china squatting pan "Orissa Pattern" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'S' trap fixed in repairs complete all as specified and as directed. Cat Part No-20042 (ORISSA PAN (ECO)) of Hindware or equivalent cat part of make NEYCER, CERA, PARRYWARE as approved by GE.
Vitreous china wash basin, white, flat back, size 550x400mm including CP mixer for mixing hot and cold water for pipe of bore 15mm, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets and waste pipe etc., fixed in repairs complete all as specified and as directed. Cat Part No. 10036 of Hindware (Model-Windsor) or equivalent cat part of make NEYCER, CERA, PARRYWARE as approved by GE.
PVC connection 15mm size with PTMT nuts of length 450mm size complete all as specified and as directed.
Tubular towel rail 60mm long 20mm dia D type aluminium anodised incl necessary brackets, fixed, complete all as specified and directed.
Vitreous china Urinal, Half stall type, white ( excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe fixed in repairs complete all as specified and directed.
Bib tap 15 mm bore with flange, Brass CP, fancy type. with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and as directed.
Stainless steel gratings 100mm dia with hole and fixed with cement mortar, complete all as specified and as directed.
Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 45 cm long fixed in repairs, complete all as specified and directed.
Taking down eaves gutters and rain water pipe , soil and waste pipe (any size or pattern ), including all fittings, heads , shoe bends , swan-necks etc. complete all as specified and directed.
110mm bore PVC SWR Type-B (pressure not less than 6 Kg/cm2) pipes single socket in any length with rubber joints laid trenches or in floors etc complete all as specified and as directed.
110mm bore PVC SWR Type-B (pressure not less than 6 Kg/cm2) pipes single socket in any length with rubber joints fixed to wall with PVC/MS holder clamp etc complete all as specified and as directed.
PVC (SWR) bends any radius 110 mm bore, complete all as specified and as directed.
PVC (SWR) reducer of 110/75mm bore (larger bore measured) complete all as specified and directed.
PVC (SWR) branch piece of 110 bore pipe, single (single Y) equal or unequal ordinary or inverted (spigot or socket type) provided with access door complete all as specified and directed.
PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
15 mm dia bore angle/stop valves (concealed type) with long shank and cup fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repairs complete all as specified and as directed.
Bib tap 15 mm bore with flange, Brass CP, fancy type(long body). with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and as directed.
Demolition of brick work or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework, complete all as specified and as directed.
Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed.
Plain Cement concrete type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in roof kerbs or mud stops, in floors, plinth courses , rounded or chamfered on edges complete all as specified and as directed.
Steel rolling shutters 1.25mm thickness of lath, with ball bearing, as specified including top cover, anchoring rod, hasp and staple erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
100 mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) as in sub base of floors finished even & fair, complete all as specified and directed.
Sand filling under floors or in foundation including watering and consolidation for laying inter locking tiles, complete all as specified and directed.
Machine pressed precast concrete interlocking paver block of any shape and size approved by EIC, ISI marked (IS:15658-2006) 60mm thick, M-35 grade , in paths and hardstanding,with grey cement and coloured pigment, laid tightly over and joints filled with dry sand. (Colour and pattern as approved by GE) complete all as specified and directed.
Cement concrete 1:2:4, type C1 (using 20mm graded crushed stone aggregate) for protecting interlocking tiles rounded or chamfered on edges complete all as specified and directed.
Roughening surfaces of old concrete floors by picking,sweeping clean and washing down with water to remove dust etc and brushing with neat cement slurry using cement at 3kg/sqm complete all as specified and as directed.
Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tiles exceeding 0.06 Sqm but n.exceeding 0.11sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement laid over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.
Taking down shutter of any description area exc 1 sqm but not exc 2.0 sqm each & re-fixing same in same opening after resecuring the edges if required, complete all as specified and directed.
Excavation in trenches, n.exc. 1.5m wide and n. exc 1.5m in depth, for foundation, etc and getting out in any type of soil, complete all as specified and directed.
Cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation filling and mass concrete, complete all as specified and as directed.
Precast reinforced cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work, complete all as specified and as directed. Note:-Reinforcement shall be measured & paid separately under respective item.
PCC 1:2:4 using 1:2:4 type B-1 (using 20mm graded crushed stone aggregate ) as in coping, bed blocks, benching and like slightly rounded or chamfered angles including necessary form work, complete all as specified and as directed.
150MM dia reinforced concrete pipes, class NP3 with collars laid in trenches and jointed complete as specified and as direcrted.
Cement concrete 1:3:6 type (C-2 using 40 mm graded crushed stone aggregate) of 150 mm dia concrete bed to drain pipe incl packing under, and haunching against the side of pipe after they are laid and tested complete all as specified and as directed.
Returning, filling incl spreading leveling watering and well ramming in layers n exc 25 cm thick each layer complete all as specified and directed.
Removal of excavated material to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.
Construction of Soakage well of size 2.4 M dia X 4.50M deep including excavation in any type of soil, foundation in PCC 1:3:6, wall of honey combed built in brick work in CM 1:4. and RCC cover M-25 concrete, filling with brick bats, complete all as specified & shown on Drg No CE/TD-1202/03 sheet 1/2 & 2/2.
Construction of Septic tank with cover slab 10 users capacity with inlet chamber, with brick work in CM 1:4, M-25 (design mix) concrete in cover slab , internal plaster 20mm thick in CM 1:3 using WPC including necessary excavation and earth work in any type of soil, RCC precast manholes covers with angle iron welded frame, CI vent pipe 100mm dia with cowl complete all as specified and shown on Drg No CE/TD-1202/03 sheet 1/2 & 2/2.
Hard core of broken stone/boulders of gauge n exc 63mm deposited spreed and leveled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified and as directed.
Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and as directed.
Cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) of 200 mm dia concrete bed to drain pipe incl packing under, and hunching against the side of pipe after they are laid and tested all as specified and directed.
200mm dia reinforced concrete pipes, class NP3 with collars laid in trenches and jointed complete all as specified and as directed.
Construction of Soakage well of size 1.8 m dia X 3.00M deep including excavation in any type of soil, foundation in PCC 1:3:6, wall honey combed built in brick work in CM 1:4. and RCC cover M-25 concrete, filling with brick bats, complete all as specified & shown on Drg No CE/TD-1202/03 sheet 1/2 & 2/2.
LLDPE conventional type septic tank designed to carry sewage and sludge water for 30 users incliding excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc., complete all as specified and as directed. Make-Sintex, Rajshree, Polycon and Star
LLDPE conventional type septic tank designed to carry sewage and sludge water for 20 users incliding excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc., complete all as specified and as directed. Make-Sintex, Rajshree, Polycon and Star
Surface dressing in any type of soil n exc 15 cm deep complete all as specified and as directed.
Rolled mild steel structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified and as directed.
Plain Cement concrete type C-2 (1:3:6), (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete for structural framed work complete all as specified and as directed.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Mild steel TMT bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.
Supply only liquid water proofing compound conforming to IS 2645-1975 of approved make complete all as specified and directed.(Dosage- @ 200ml per 50Kgs of Bags of cement)
Construction of Soakage well of size 1.2m dia X 4.50m deep including excavation in any type of soil, foundation in PCC 1:3:6, wall honey combed built in brick work in CM 1:4. and RCC cover M-25 concrete, filling with brick bats, complete all as specified & shown on Drg No CE/TD-1202/03 sheet 1/2 & 2/2.
LLDPE conventional type septic tank designed to carry sewage and sludge water for 10 users incliding excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc., complete all as specified and as directed. Make-Sintex, Rajshree, Polycon and Star
Framed mild steel work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.
Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors with & including screed bed 10mm thick in CM 1:4, complete all as specified and directed.
Preparation of newly plastered surface of ceiling and apply two coat of Oil bound distemper Over one coat of primer, complete all as specified and directed.
Vitrified ceramic tiles light shade 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors/skirting etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade incl 15mm thick screed bed/back coat in cement and sand mortar 1:4 complete all as specified and directed.
Aluminium kitchen concealed cupboard door hinges with installation complete all as specified and as directed.
Glazing with sheet glass 5.5mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Figured glass sheet, 5.00mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Vitreous china wash down water closet pan pedestal pattern in white colour with 'P' or 'S' traps excluding seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed. Cat Part No-20011 (SLICK) of Hindware or equivalent cat part of make NEYCER, CERA, PARRYWARE as approved by GE.
Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
Chromium plated Hand shower (Health faucet) with 1.5m long flexible tube of stainless steel in chrome finish and wall hook fixed, complete all as specified and as directed.
Stainless steel Soap dish, any type, fixed with plugs chromium plated brass screws fixed in repairs complete all as specified and as directed.
Toilet paper holder of white vitreous china, box type fixed to plug with chromium plated brass screwscomplete all as specified and as directed.
Corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 300mm wide with chromium plated bracket guard fixed in repairs, complete all as specified and directed.
PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed, complete all as specified and as directed.
75mm bore PVC SWR Type-B (pressure not less than 6 Kg/cm2) pipes single socket in any length with rubber joints fixed in floors etc complete all as specified and as directed.
75mm bore PVC SWR Type-B (pressure not less than 6 Kg/cm2) pipes single socket in any length with rubber joints fixed to wall with PVC/MS holder clamp etc complete all as specified and as directed.
PVC (SWR) bends any radius 75 mm bore, complete all as specified and as directed.
PVC (SWR) vent cowl for 75mm dia fixed, complete all as specified and as directed.
15mm bore brass CP wall mixer with connector for telephonic / hand shower arrangement with connecting Legs, wall Flanges & wall bracket for telephonic / hand shower for mixing hot or cold water, screwed for iron pipe and fixed in repairs, complete all as specified and directed.
Powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
Powder coated aluminium anodised door shutters(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.
Powder coated anodised aluminium window / ventilator( glazed / gauged skeleton shutter ), (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No. ) suitable handle (1 No.) complete all as specified and as directed.
Door closer hydraulically regulated, aluminium extruded section body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.
Aluminium body Mortice lock,4-levers vertical type, size 100 mm with & including escutcheon plates and two keys, complete all as specified and as directed.
Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.
Point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular steel box, top cover plate, blank plate, screws,washers to be used of same make/brand only and shall be deemed in to included in quoted rate only.)
One light point/fan /bell point controlled by one switch.
One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .
One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .
Point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 2.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface for One 15 amps power socket outlet point controlled by one 16 amps switch on independent board. complete all as specified and directed Note- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all fittings are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)
Modular type switch 6 Amps, single pole, 1way,1 module, 240V, ISI Marked Complete all as specified and directed. “Cat part No ACVSXXWO61 of Crabtree (Havells) or its equivalent in Anchor, Legrand, Seimens as approved”.
Modular type switch 16 Amps, single pole, 1way,1 module, 240V, ISI Marked Complete all as specified and directed. “Cat part No ACVSXXW161of Crabtree (Havells) or its equivalent in Anchor, Legrand, Seimens as approved”.
Modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module, 240V, AC ISI Marked Complete all as specified and directed. “Cat part No ACVKSWW063 of Crabtree (Havells) or its equivalent in Anchor, Legrand, Seimens as approved”.
Modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module with light indication ,240V,AC ISI Marked Complete all as specified and directed . “Cat part No ACVKCWW163 of Crabtree (Havells) or its equivalent in Anchor, Legrand, Seimens as approved”.
Fan regulator modular type electronic compatible with BLDC fan, stepped type 100 Watts, 2 module 240Volts, AC ISI marked complete all as specified and directed. “Cat part No ACVRFHW008 of Crabtree (Havells) or its equivalent cat part of make Anchor, Legrand, Seimens as approved by GE”.
Ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed
Vertical double door enclosure factory made TPN in replacement fitted with bus bar neutral link, blanking plates of 4 way (4+12) with suitable for incomming MCCB 4 pole 'I/C' frame,having isolated neutral bar, mechanical impact strength IK09, door earthing suitable for MCCB upto 125 Amp, complete all as specified and as directed
MCCB 63 Amps, 4 Pole, 415 Volts, 50 Hz, 16 KA fixed thermal & fixed magnetic, complete all as specified and directed.
Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging, blanking plates where required testing and commissioning in replacement, complete all as specified and as directed. Make:- Havells cat part No-DHDPSHODPW12 or its Equivalent cat part of make of Legrand / ABB / L&T as approved by GE.
MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series fixed complete all as specified and as directed. Make:-Havells cat part No-DHMGCSPF006-032 or its equivalent cat part of make-Legrand / ABB / L&T as approved by GE
MCB's single pole & neutral 240 volts 40 to 63Amps 10 KA 'C' series, complete all as specified and as directed. Make: Havells Cat Part No.DHMGCSNF040-063 or its equivalent cat part of make-Legrand / ABB / L&T as approved by GE
Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45cm x 45cm x 45 cm,RCC cover 1:2:4 type B1 of size 45x45x6 cm, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.Note:- The required resistance of Earthing shall be less than 3 ohm, If not found to the required resisstance, the contractor has to re earthing for required resistance and the cost for the same included in the quoted rate and no extra shall be paid on failure of getting required resistance.
LED light fitting 1x20W, 220V, AC decorative box type with driver, Holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Energy saving LED lamps 13 watt, 230 volts, 50 HZ ,base holder B22 type. complete all as specified and as directed. Make- Havell Cat part No-LHLDDEHEML8R013 or equivalent of Make-Phillips, Crompton, wipro, bajaj as approved.
Ceiling fans complete with blades, down rods, and accessories, 230 volt, 1200mm sweep, min air delievery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) including taking down old unsv fan, complete all as specified and directed. Make:- Cat Part No Zinger of Make Havells or its Equivalent cat part of make-BAJAJ,CROMPTON GREAVES, GEC, KHAITAN,ORIENT as approved by GE
35 Watt LED energy saving light fitting environment friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 with GI bracket made of light grade GI pipe 40 mm dia of 1.2 mtr long bend to shape with 02 Nos of FI clamp 32 x 4mm with suitable size nuts, bolts, washers etc. and making the connection from ceiling rose to fitting with suitable size twin core copper conductor cable complete all as specified and directed. (Make- Havells, cat part No ENDURASUNDOWNSL35WLED765PASYBOPC or Bajaj/Philips/Crompton Greaves or its equivalent).
20 Watt LED batten/inverter capacity having charging time 8 hours, driver efficiency > 85% , power factor > 95% and operating voltage 270 volt with suitable size nuts, bolts, washers etc. and making the connection from ceiling rose to fitting with suitable size twin core copper conductor cable complete all as specified and directed . (Make- Havells, cat part No LHEXACP7FN1W020 or Bajaj/Philips/Crompton Greaves or its equivalent).
80 Watt LED flood light energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting complete with all accessories pre wired and making connection with copper flexible cable of suitable size to light fitting complete all as specified and directed. Make:-Havells Cat Part No:- JETAALBAFLOODLIGHT80W or Equivalent cat part of make Bajaj/Philips/Crompton Greaves or its equivalent).
Sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked) cable 1100 volts grade,FRLS type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLS type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface including cutting and cheasing and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.
Exhaust fan single phase metal body, AC 230 Volt, 50 Hz, 900 RPM of size 300mm sweep with louvers shutter complete with all accessories including connecting up from ceiling rose complete all as specified and directed. Make:- Cat part No:- Turbo Force 1P Grey of Havells or its Equivalent cat part of make-BAJAJ,CROMPTON GREAVES, GEC, KHAITAN,ORIENT as approved by GE
Supply, laying & testing of XLPE insulated, armoured, heavy duty electric under ground cable with stranded aluminium conductor of size 16 Sqmm nominal cross section x 2 core., 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs, including taking down old unsv cable, complete all as specified and directed.
Supply, laying & testing of XLPE insulated, armoured, heavy duty electric under ground cable with stranded aluminium conductor of size 16 Sqmm nominal cross section x 4 core., 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs, including taking down old unsv cable, complete all as specified and directed.
GI pipe light grade 40mm bore for cable protection fixed on pole or liad in trenches under floor,ducts etc with fixing clamps, nuts, bolts etc., complete all as specified.
Sand cushioning to under ground cable, 8 cms thick before laying the cable and 15 cms thick after laying and stretching the cable in trenches including hand punning and consolidating, punned to 18cm thickness, complete all as specified and directed. Note : For payment purpose, only punned thickness shall be measured.
Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat, complete all as specified and directed.
M/S KARAN SINGH CONTRACTOR
M/s Rajesh Kumar Contractor
M/s Sekinder Paul Sharma
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .