RENOVATION and MISCELLANEOUS CIVIL WORKS AT GAUTAM BUDDHA UNIVERSITY, GREATER NOIDA

unserviceable material separately including cutting reinforcement bars.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials

by mechanical means, including loading, transporting, unloading to approved municipal

dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all

leads including all lifts involved.

SUB TOTAL OF DISMANTALLING ₹ 1,91,741.65 ₹ 73,173.75

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation

7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 200 ₹ 932.10 ₹ 1,86,420.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course

of half brick masonry.

3 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix:

4 13.4 ROUGH CEMENT PLASTER :- 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to

15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and

spiral stair cases above plinth level up to floor five level, excluding the cost of centering,

shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3

graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 30 ₹ 83.50 ₹ 2,505.00

Centering and shuttering including strutting, propping etc. and removal of form for :

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 10 ₹ 552.05 ₹ 5,520.50

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP

8 MR Punning over cement plaster in line & plumb finished smooth to receive paint. (Internal sqm 400 ₹ 268.22 ₹ 1,07,287.96

surfaces of walls).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)

9 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 250 ₹ 498.35 ₹ 1,24,587.50

10 2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 110 ₹ 200.85 ₹ 22,093.50

ANTI- TERMITE - Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-

11 2.35 termite treatment (excluding the cost of chemical emulsion) :

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25

litres per linear metre including drilling and plugging holes etc.:

2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration sqm 50 ₹ 39.45 ₹ 1,972.50

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,

12 22.5 by applying cement slurry mixed with water proofing cement compound consisting of

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with

water curing for 48 hours.

(The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.)

FOAM CONCRETE FILLING UNDER TOILETS AND PANTRY:- Filling and compacting Foam

Concrete for raising level of toilets and pantry and finishing in a coat of lean concrete

screeding with waterproofing compound complete in all respects to take Tile

Flooring as per flooring specifications.

SUB TOTAL OF MASONRY AND PLASTER ₹ 6,11,814.80 ₹ 2,05,929.92

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make,

in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed

of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3

kg/ sq.m including pointing the joints with white cement and matching pigments etc.,

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness

to be specified by the manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,

2 8.31 risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sqm 150 ₹ 1,030.30 ₹ 1,54,545.00

sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1

cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting

the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of

approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of

cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joint with white cement & matching pigments etc. complete.

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron

screws complete with :

11.33.1 Second class teak wood sqm 350 ₹ 4,152.45 ₹ 14,53,357.50

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 20 mm

6 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

7 8.3 machine polishing to edge to give high gloss finish etc. complete as per design approved

by Engineer-in-Charge.

8.3.2 Granite work metre 20 ₹ 376.25 ₹ 7,525.00

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

platform, vanity counter and similar location in marble/ Granite/ stone work, including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges

Mirror polishing on marble work/Granite work/stone work where ever required to give high

gloss finish complete.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar

10 11.55 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar

11 11.56 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing , curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height,

backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3

coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust)

with an admixture of pigment matching the stone shade : (To be secured to the backing

and the sides by means of cramps and pins which shall be paid for separately) :

Red sand stone - Exposed face machine cut and table rubbed with rough backing.

White sand stone - Exposed face machine cut and table rubbed with rough backing.

Providing and fixing stainless steel cramps of required size and shape for anchoring stone

wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar

1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes

in walls wherever required.

Extra for stone work for wall lining on exterior walls of height more than 10 m from ground

level for every additional height of 3 m or part there of.

Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut

stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural

steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with

approved weather sealant as per Architectural drawing and direction of Engineer-in-

charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for

a 8.20.1 Red sand stone - 30mm thick gang saw cut stone sqm 50 ₹ 2,217.75 ₹ 1,10,887.50

b 8.20.2 White sand stone - 30mm thick gang saw cut stone sqm 50 ₹ 2,407.40 ₹ 1,20,370.00

Providing and fixing adjustable stainless steel cramps of approved quality, required shape

and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than

16 8.22 260 gms), for dry stone cladding fixed on frame work at suitable location, including each 100 ₹ 327.00 ₹ 32,700.00

making necessary recesses in stone slab, drilling required holes etc complete as per

direction of the Engineer-in-charge.

Providing and fixing expandable fasteners of specified size with necessary plastic sleeves

17 8.24 and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and

making good etc. complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to

seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal &

vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.

clamps and M.S. staircase system in the scaffolding for working platform etc. and

maintaining it in a serviceable condition for the required duration as approved and

removing it there after .The scaffolding system shall be stiffened with bracings, runners,

connection with the building etc wherever required for inspection of work at required

locations with essential safety features for the workmen etc. complete as per directions

and approval of Engineerin- charge .The elevational area of the scaffolding shall be

measured for payment purpose .The payment will be made once irrespective of duration

of scaffolding.

SUB TOTAL OF PAVING AND WET WORKS ₹ 40,88,286.50 ₹ 0.00

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of

1 12.45 angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and

Including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound

in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I sqm 200 ₹ 1,117.65 ₹ 2,23,530.00

Providing and fixing of mineral fiber ceiling tiles, with hot dipped galvanized steel grid

work (Silhotte) , surface chemically cleaned capping pre-finished in baked polyester

paint, Main Tees of size 38 (H) x 15 mm every 1.2M centre to centre, centre to centre to

form a grid of size 600 X 600 mm and suspending the grid from RCC roof using 3 mm GI

rod, 6 mm nylon rawl plug and 6mm J bolt at every 1200 mm intervals. And laying mineral

fiber Acoustic ceiling tiles MV B-Pin of size 600 x 600 x 15 OCR mm over the formed grid

having fire rating of 60 minutes as per BS 47G / 23 of 1987. Light Reflection of > 85%. Noise

Reduction Coefficient (NRC) of 0.70, Sound Attenuation of 32 db, K = 0.52-0.57 W/mk.

Humidity Resistance up to 99% at 50’C. The grid to be used is Silhoutte type as per

approval of the architect

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner

with suitably spaced joints to get required length and of size 24x38 mm made from 0.30

mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25

mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at

600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length

600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at

middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size

3 12.52 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including,

required cutting/making, opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats

of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash

fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8

mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm

of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per

specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and

0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both

sides inclusive) and electro statically polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm

and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm

(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC

b 12.52.2 (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of sqm 50 ₹ 1,649.15 ₹ 82,457.50

thickness 60 microns (minimum), including factory painted after bending and perforation,

and backed with a black Glass fiber acoustical fleece.

SUB TOTAL OF CEILING ₹ 3,21,032.00 ₹ 1,43,783.76

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls

cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x

10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

1 14.2 aggregate 20 mm nominal size), painting two coats of approved wood preservative to

sides of chowkhats and making good the damages to walls and floors as required

complete, including disposal of rubbish to the dumping ground, all complete as per

direction of Engineer-in-Charge.

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or with dash

fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood cum 18 ₹ 1,30,183.05 ₹ 23,43,294.90

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

decorative type, core of block board construction with frame of 1st class hard wood and

well matched teak 3 ply veneering with vertical grains or cross bands and face veneers

on both faces of shutters.

9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 260 ₹ 3,023.95 ₹ 7,86,227.00

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

4 9.23 edges of flush door shutters (over all area of door shutter to be measured) sqm 260 ₹ 401.40 ₹ 1,04,364.00

Providing and fixing wooden moulded beading to door and window frames with iron

screws, plugs and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete

HANDLES;- Providing and fixing bright finished brass handles with screws etc. complete:

DOOR CLOSERS:- Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the

9 9.84 body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with each 5 ₹ 851.60 ₹ 4,258.00

double speed adjustment with necessary accessories and screws etc. complete.

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

11 9.97 AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, complete:

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved

brand and manufacture, including providing and fixing top & bottom pivot & spring type

fixing arrangement and making necessary holes etc. for fixing required door fittings, all

complete as per direction of Engineer- incharge.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of

repaired door shutters to existing door frames, including replacement of hinges with

screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing & Fixing Full Height 3-6mm toughened glass on existing frame as per instructions

of Engineer- in-charge.

Providing & Fixing Full Height 12mm toughened glass on existing frame as per instructions of

Engineer- in-charge.

SUB TOTAL OF DOOR AND WINDOWS ₹ 36,48,740.10 ₹ 2,49,024.25

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low

VOC (Volatile Organic Compound ) content.

With water thinnable cement primer on wall surface having VOC content less than 50

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre

and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior

paint of required shade (Company Depot Tinted) with silicon additives.

New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming

coat of exterior primer applied @ 0.90 litre/10 sqm.

Distempering with oil bound washable distemper of approved brand and manufacture to

give an even shade :

New work (two or more coats) over and including water thinnable priming coat with

6 13.50 Applying priming coat:

With ready mixed red oxide zinc chromate primer of approved brand and manufacture

on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an

a 13.61.1 Two or more coats on new work sqm 3615 ₹ 121.55 ₹ 4,39,403.25

b 13.114 Melamine polishing on wood work (one or more coat). SQM 80 ₹ 110.75 ₹ 8,860.00

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in

8 10.25 position and applying a priming coat of approved steel primer using structural steel etc. as

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 2640 ₹ 131.00 ₹ 3,45,840.00

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with

9 14.76 earth etc. and disposal of same, all as per the direction of Engineer-in-charge. each 120 ₹ 77.65 ₹ 9,318.00

Cleaning and desilting of rain water drains, including removal of rubbish mixed

10 MR with earth etc. and disposal of same, all as per the direction of Engineer-incharge. metre 10000 ₹ 88.49 ₹ 8,84,911.97

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design

for expansion joints.

Providing and fixing 6mm thick poly-carbonate sheet with 40% transparency as per vendor

and to be matched with existing on roof of the attrium including cost of removing of

existing roof sheet and dumping/ storing the same as per instruction of Project in charge,

12 MR including cost of all necessary fixing arrangement, framing wherever required complete sqm 1239.00 ₹ 3,582.76 ₹ 44,39,036.14

with all respect as per manufecturer details and specification and instruction of Project in

charge/ Architect. (the cost to including scaffolding)

13 16.15 Supplying at site :

Welded steel wire fabric of required width having rectangular mesh painted with two or

more coats of enamel paint of approved shade over a coat of primer (Priming & Painting kg 132580.8 ₹ 74.35 ₹ 98,57,382.48

16.15.2 to be paid for separately).

Supplying at site Angle iron post & strut of required size including bottom to be split and

14 bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm kg 6720 ₹ 92.40 ₹ 6,20,928.00

16.19 dia. etc. complete.

Welded steel wire fabric fencing with posts of specified material and of standard design

placed and embedded in cement concrete blocks 45x45x 60 cm of mix 1:5:10 (1

cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size), every 15th post,

last but one end post and corner post shall be strutted on both sides and end post on one

15 side only and struts embedded in cement concrete blocks 70x45x50 cm of the same mix, sqm 15840 ₹ 51.00 ₹ 8,07,840.00

provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I.

staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts,

welded steel wire fabric, painting, earth work in excavation and concrete to be paid for

16.20 separately).

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means Cum 360.00 181.85 65466.00

over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.- All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations Cum 360.00 219.65 79074.00

17 2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by

ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

SUB TOTAL OF FINISHING & MISCELLANEOUS ₹ 1,49,25,354.73 ₹ 53,23,948.11

RAIN WATER HARVESTING SYSTEM

S NO. DSR 2019 Description Unit Qty DSR Rate DSR Amount NS Rate NS Amount

Surface dressing of the ground including removing vegetation and inequalities

2.28 not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up

2.28.1 All kinds of soil SQM 9.00 24.35 219.15

Disposal of surplus earth by mechanical transport including loading, unloading

2 for a lead upto 10 Km. CUM 30.00 277.83 8,334.90

Providing and laying in position cement concrete of specified grade excluding

4.1 the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm

nominal size) CUM 3.00 5,789.60 17,368.80

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable

method prescribed in IS: 2800 (part I), including collecting samples from

different strata, preparing and submitting strata chart/ bore log, including hire

& running charges of all equipments, tools, plants & machineries required for

the job, all complete as per direction of Engineer-in-charge, upto 90 metre

4 23.1 depth below ground level.

a 23.1.1 All types of soil

b 23.1.2 Rocky strata including Boulders

Supplying, assembling, lowering and fixing in vertical position in bore well

unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:

12818, including hire & labour charges, fittings & accessories etc. all complete,

for all depths, as per direction of Engineer-in-charge.

23.4.3 200 mm nominal size dia meter 70 1135.8 79,506.00

Gravel packing in tubewell construction in accordance with IS: 4097, including

providing gravel fine/ medium/ coarse, in required grading & sizes as per

actual requirement, all complete as per direction of Engineer-in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW

(Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain

ended casing pipes of required dia, conforming to IS: 4270, of reputed &

approved make, including painted with outside surface with two coats of

anticorrosive paint of approved brand and manufacture, including required

hire & labour charges, fittings & accessories, all complete, for all depths, as per

direction of Engineer-in-charge.

200 mm nominal size dia having minimum wall thickness

Development of tube well in accordance with IS : 2800 (part I) and IS:

11189, to establish maximum rate of usable water yield without sand

content (beyond permissible limit), with required capacity air

compressor, running the compressor for required time till well is fully

developed, measuring yield of well by “V” notch method or any other

approved method, measuring static level & draw down etc. by step

draw down method, collecting water samples & getting tested in

approved laboratory, i/c disinfection of tubewell, all complete, including

hire & labour charges of air compressor, tools & accessories etc.,

all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot

welded plate to the top of bore well housing/ casing pipe, removable

9 23.13 as per requirement, all complete for borewell of:

Providing and fixing M.S. clamp of required dia to the top of casing/

housing pipe of tubewell as per IS: 2800 (part I), including necessary

10 23.14 bolts & nuts of required size complete.

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 864347.80 382087.19

B WATER SUPPLY 181397.90 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 397537.25 0.00

Total ( Carried Forward) in Rs. 1443282.95 382087.19

BOQ FOR PLUMBING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

DSR - DSR Rate NS Rate DSR Amount NS Amount

SL. NO. DESCRIPTION OF ITEMS UNIT Qty

1 17.78 Providing and fixing white vitreous china extended wall Each 30 13852.45 415573.5

mounting water closet of size 780x370x690 mm of approved

shape including providing & fixing white vitreous china

cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre

(adjustable to 4 litre/ 8 litres), including seat cover, and

cistern fittings, nuts, bolts and gasket etc complete.

MR Providing & fixing glazed vitreous china wash basin with R.S. Each 28 5835 163392.3719

or C.I. brackets painted white, 32mm C.P. brass waste of

standard pattern , C.P brass wall flange 32 mm dia. C.P. brass

bottle trap and union 32 mm dia C.P. pipes to wall flange.

complete including cutting and making good the walls

wherever required.

2 17.23 Providing and fixing white vitreous china flat back or wall Each 15 1299.75 19496.25

corner type lipped front urinal basin of 430x260x350 mm or

340x410x265 mm sizes respectively.

4 17.13 Providing and fixing white vitreous china water closet

squatting pan (Indian type) :

17.13.2 Orissa pattern W.C. pan of size 580x440 mm Each 5 2544.5 12722.5

5 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube Each 30 297.55 8926.5

upto 1 metre long with S.S. triangular plate to Eureopean

type W.C. of quality and make as approved by Engineer - in -

6 17.19 Providing and fixing controlled flush, low level cistern made

of vitreous china with all fittings complete.

17.19.1 10 litre (full flush) capacity-white Each 73 1839.7 134298.1

7 17.22 Providing and fixing G.I. inlet connection for flush pipe Each 73 116.1 8475.3

connecting with W.C. pan.

8 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of Each 159 883.05 140404.95

approved quality & make and as per the direction of

Engineer-in-charge.

9 17.22B Providing and fixing CP Brass Single lever telephonic wall

mixer of quality & make as approved by Engineer in charge.

(a) 15 mm nominal dia Each 5 6113.6 30568

10 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

17.28.1 Semi rigid pipe

Providing and fixing C.P. brass shower rose with 15 or 20 mm

1.11 Supply, installation, testing and commissioning of beveled

edge mirror 5.5mm thick of superior quality complete with

necessary finxing arrangements as required i.e., screws/

washers/ fastners/ adhesive etc. as per directions of

NS engineer-in-charge. Sqm 12 1,645 19734.19084

1.12 Supply, installation, testing and commissioning of Hand

Shower (Health Faucet) with 8mm dia, 1M long PVC tube

NS and wall hook CP brass wall flange. Each 85 1,386 117834.7116

1.16 Providing and fixing C.P. brass bib cock of approved quality

18.49 conforming to IS:8931 :

18.49.1 15 mm nominal bore Each 130 418.95 54463.5

1.17 Providing and fixing C.P. brass long nose bib cock of

approved quality conforming to IS standards and weighing

18.50 not less than 810 gms.

18.50.1 15 mm nominal bore Each 20 618.8 12376

1.18 Providing and fixing C.P. brass angle valve for basin mixer

and geyser points of approved quality conforming to IS:8931

18.53.1 15mm nominal bore Each 10 532 5320

1.19 Providing and fixing C.P. brass angle piller tap of approved

quality as per approval of engineer in charge.

i. Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures shall

be selected by Architect/Interior designer/Project manager

and the same shall be binding for execution.

ii. No additional fixing cost shall be paid for change in type of

sanitary fixtures.

iii. Contractor to receive all the above mentioned items & store

at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 864347.80 382087.19

SUB HEAD B: WATER SUPPLY

SL. DSR - DSR Rate NS Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

(CPVC) plain & brass threaded fittings including fixing the pipe

with clamps at 1.00 m spacing. This including jointing of pipes &

fittings with one step CPVC solvent cement and testing of joints

complete as per direction of engineer in charge. .

Internal Work - Exposed on Wall

18.7.2 20 mm nominal outer dia pipes. Metre 50.00 306.95 15347.50

18.7.3 25 mm nominal outer dia pipes. Metre 50.00 369.20 18460.00

18.7.4 32 mm nominal outer dia pipes. Metre 50.00 480.55 24027.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

18.8.2 20 mm nominal outer dia pipes. Metre 50.00 478.15 23907.50

18.8.3 25 mm nominal outer dia pipes. Metre 50.00 561.95 28097.50

18.8.4 32 mm nominal outer dia pipes. Metre 50.00 679.15 33957.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings This includes jointing of pipes

& fittings with one step CPVC solvent cement, trenching, refilling

& testing of joints complete as per direction of Engineer in

18.9.4 32 mm nominal outer dia Pipes metre 50.00 413.70 20685.00

Providing and fixing brass stop cock of approved quality

3 18.16 complete.

Providing and fixing gun metal gate valve with C.I. wheel of

4 18.17 approved quality (screwed end):

18.17.1 25 mm nominal bore Each 2.00 497.15 994.30

18.17.2 32 mm nominal bore Each 2.00 581.25 1162.50

Providing and fixing C.P. bass angle valve for basin mixer and

geyser points of approved quality conforming to I.S:8931 a) 15

mm nominal bore.(Jaquar model no. 1133/approved equal).

Providing and fixing unplasticised P.V.C connection pipe with

PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 28.00 112.45 3148.60

Sub-Total of Water Supply Installation 181397.90

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR - DSR Rate NS Rate DSR Amount

DESCRIPTION OF ITEMS UNIT Qty Amount

Providing and fixing cast iron trap of self cleansing design with cast iron

screwed down or hinged grating with or without vent arm complete,

including cost of cutting and making good the walls and floors.

17.60.1 100 mm inlet and 100 mm outlet

17.60.1.1 Sand cast iron S&S as per IS: 3989 Each 5 1,512.55 7,562.75

2 17.35 Providing and fixing soil, waste and vent pipes.

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Metre 50 1,092.20 54,610.00

17.35.2 75 mm diameter :

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Metre 50 992.05 49,602.50

Providing and fixing single equal plain junction of reqd. degree with access

door, insertion rubber washer 3mm thick, bolts and nuts complete.

17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 10 722.55 7,225.50

17.43.2.2 Sand cast iron S&S as per IS - 3989 Each 10 549.35 5,493.50

Providing and fixing bend of required degree with access door, insertion

4 17.38 rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 10 461.65 4,616.50

17.38.2.2 Sand cast iron S&S as per IS- 3989 Each 10 384.75 3,847.50

5 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast iron S&S as per IS : 3989 Each 10 390.75 3,907.50

17.39.2.2 Sand cast iron S&S as per IS - 3989 Each 10 289.75 2,897.50

6 17.57 Providing and fixing collar.

17.57.1.2 Sand cast iron S&S as per IS - 3989 Each 10 409.45 4,094.50

17.57.2.2 Sand cast iron S&S as per IS - 3989 Each 10 256.30 2,563.00

Providing and fixing MS holder bat clamps of approved design to cast iron

(spun) pipe embedded in and Including cement concrete blocks 10 x10

x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20mm nominal size) including cost of cutting holes and making good the

7 17.37 walls etc.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c

8 18.10 cutting and making good the walls etc.

18.10.4 32 mm dia nominal bore Metre 30 529.70 15,891.00

18.10.5 40 mm dia nominal bore Metre 30 639.60 19,188.00

18.10.6 50 mm dia nominal bore Metre 30 786.75 23,602.50

Painting G.I. Pipes and fittings with two coats of anticorrosive bitumastic

9 18.40 paint of approved quality

18.40.4 32 mm diameter pipe Metre 30 17.05 511.50

18.40.5 40 mm diameter pipe Metre 30 19.40 582.00

18.40.6 50 mm diameter pipe Metre 30 23.35 700.50

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes

and fittings with two coats of synthetic enamel paint of any colour such as

chocolate grey, or buff etc. over a coat of primer (of approved quality) for

10 17.65 new work :

17.65.1 100 mm diameter pipe Metre 100 64.20 6,420.00

17.65.2 75 mm diameter pipe Metre 100 48.85 4,885.00

Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron

11 17.58 pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement mortar

12 17.36 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

13 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast iron S&S as per IS - 3989 Each 20 798.80 15,976.00

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or

S.C.I. rain water pipes embedded in and including cement concrete blocks

10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) and cost of cutting holes and making good

15 12.38 the walls etc. :

Providing and fixing to the inlet mouth of rain water pipe cast iron

12.44 grating 15 cm diameter and weighing not less than 440 grams. each 20 47.25 945.00

Sub-Total of Drainage Installation 397537.25 0.00