REPAIR TO DIFFERENT TYPE OF WOODEN FURNITURE FOR MD AND OTM ACCN REPAIR REPAINTING TO ALMIRAH RACKS AND LOCKERS STEEL AND WOODEN AT AF STN AGRA

Amount

REPAIR TO TABLE DINING OR`s SUNMICA TOP 2100 MM X 900 MM X 760 MM, Drg No. FD-165 (M) Removing of unserviceable top and S & F new top of 18 mm thick pre- laminated particle board exterior grade, ISI marked, teak finish on one side and other side white with 4 mm thick TW beading all-round the table complete all as specified, directed and as shown on drg.

Taking down old unserviceable legs and S & F new leg of Ist class HW ( teak wood) size as shown on drg.

Taking down old unserviceable long rail and S & F new long rail of Ist class HW ( teak wood) size as shown on drg.

Taking down old unserviceable short rail and S & F new short rail of Ist class HW ( teak wood) size as shown on drg.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dining OR's, 2100 mm x 900 x 760 mm except top over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO SOFA SET 4 SEATER/ 5 SEATER, Drg No. FD-281/ 373/ 258 Taking down old unserviceable front/ rear leg of sofa set 4 seater/ 5 seater and S&F new front/ rear leg made out of 1st class hard wood (teak) as per existing shape and size complete all as specified and shown on drawing and as directed.

Taking down old unserviceable side(left/ right) and front/ rear rail of sofa set single seater and S & F new side (left/ right) and front/ rear rail of sofa set single seater made out of Ist class hard wood (teak) as per existing shape and size complete all as specified, shown on drawing and as directed.

Taking down old unserviceable long rail ( front/rear) of sofa three seater and supply and fixing of new long rails ( front/rear) of of sofa (three seater)made out of Ist class hard wood (teak) as per existing shape and size compete all as specified, shown on drawing & as directed.

Taking down old unserviceable battens of seat/ back of sofa single/ three seater and S&F new battens of seat/ back of sofa single/ three seater made out of Ist class hard wood (teak) as per existing shape and size all as specified, shown on drawing and as directed.

Taking down old unserviceable arms of sofa single/ three seater and S & F new arms made out of Ist class hard wood (teak) as per existing shape and size complete all as specified, shown on drawing and as directed.

Removing of existing unserviceable cushion from seat and back of sofa set 4 seater/ 5 seater and S & F new foam cushion 95 to 100 mm thick, 32 density duly covered with superior quality tapestry cloth all as specified and directed .

Removing of existing old unserviceable tapestry cloth from seat and back of sofa set 4 seater/5 seater and S & F new tapestry cloth of superior quality suly stitched all as specified and directed .

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of sofa chair over and including a coat of wood filler & tightening of all loose componentscomlpete all as specified and as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of sofa set 03 seater over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO LOCKER BED SIDE WOODEN, Drg No FD-54 Removing of existing unserviceable shutter and S&F 18 mm thick particle board commercial type with 4 mm thick teak wood beading on three sides of shutter all as specified and directed.

Removing of existing unserviceable back and S&F new ply wood back of 6 mm thick commercial type all as specified and directed.

Removing of existing unserviceable bottom and S&F new bottom of 1st class hard wood duly smooth and finished all as specified and directed.

Removing of existing unserviceable top and S&F new top of 18 mm thick particle board commercial type with 4 mm thick teakwood beading all around all as specified and directed.

Removing of existing unserviceable shelves and S&F new shelves made of 18mm thick commercial particle board with 4mm teak wood beading through finished complete all as specified and directed.

Removing of existing unserviceable partition wall and S&F new partition wall of 18mm thick particle board commercial type complete all as specified and directed.

Removing of existing unserviceable legs and S&F new legs of 1st class hard wood teak duly planned as per existing shape and size all as specified and directed.

Taking down existing unserviceable hinges and S&F new 18mm wide piano type hinges of mild steel chromium plated ISI marked with required size of SS screws all as specified and directed.

Taking down existing unserviceable handle and S&F new aluminium anodized 100 mm long handle ISI marked with required size of SS screws all as specified and directed.

Taking down existing unserviceable hasp and staple and S&F new hasp and staple aluminum anodized 75 mm long ISI marked with required size of SS screws all as specified and directed.

M&L for painting with two coats of synthetic enamel paint with one coat of pink primer on new components & one coat of synthetic enamel paint on old surfaces of locker bed side wooden complete internally and externally except bottom including preparation of old/ new surfaces all as specified & directed.

M&L for painting with two coats of black bituminous paint on bottom of locker bed side wooden including preparation of old/ new surfaces all as specified & directed.

REPAIR TO TABLE OFFICE OFFICER/ TABLE OFFICE CLERKS WOODEN, Drg No FD- Removing of existing old unserviceable table top of table office officer wooden and S&F new table top of table office officer wooden of 18 mm thick pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all round the top complete all as specified, directed and as shown on drg.

Description all as per item No 27.00 here-in-before but for Table office clerk wooden.

Replacement of cup board shutter made out of 18mm thick one side teak veneered particle board with 4 mm thick teak wood beading on three sides of shutter including fixing complete with paino type hinges size as shown on drawing for table office officer/ clerk wooden all as specified and directed.

Replacement of leg teak wood size, shape & design as shown on drg for table office officer/ clerk wooden all as specified and directed.

Replacement of long rail made out of teak wood size, shape & design as shown on drg for table office officer/ clerk wooden all as specified and directed.

Replacement of short rail made out of leg teak wood size, shape & design as shown on drgs for table office officer/ clerk wooden all as specified and directed.

Replacement of drawer made out of teak wood of size, shape & design as shown on drg for table office officer/ clerk including 35 mm dia knob all as specified and directed.

Replacement of knob 55 mm dia including taking out wooden knob all as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table office officer/ clerk over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO TABLE WRITING MED/ JCOs/ SMALL, Drg No. FD-249, 275 Removing of old unserviceable table top and S & F new table top of pre-laminated particle board one side decorative 18 mm thick interior grade as per existing shape and size including 4 mm thick teak wood beading all around complete all as specified and shown on drawing .

Removing of old unserviceable legs under the drawer/ cupboard side of table writing and S & F new leg of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished smooth complete all as specified and shown on drawing.

Description all as per item No 37.00 here-in-before but opposite side of drawer / cupboard.

Removing of old unserviceable back ply of table writing and S&F new back of 6 mm thick plywood commercial type as per existing shape and size complete all as specified and shown on drawing.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table writing inside and outside legs except top and bottom over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO HAT STAND WITH MIRROR, Drg No. FD-233, 361, 362 & 1110 Taking down old unserviceable peg of hat stand and S&F new aluminium peg of existing shape and size, fixed with required size brass screws complete all as specified and directed.

Taking down old unserviceable mirror of hat stand and S&F new mirror 5mm thick as per existing shape and size including beading and 6 mm thick ply wood back complete all as specified and directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to all old and new exposed surfaces of hat stand with mirror over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO TEAPOY VERANDAH (MAP), Drg No. FD-FD/ E6/ MAP/ 17 Removing of unserviceable top and S & F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round the teapoy verandah.

Removing of old unserviceable square MS pipe and S&F 18 mm square MS pipe of heavy quality including one coat of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Removing of old existing unserviceable MS rod and supply & fixing new MS bar 5mm dia, bar base tray as per existing size and welded to tray complete all as specified and directed.

S&F hard rubber shoe of superior quality as per existing shape and size for teapoy verandah all as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of teapoy verandah complete all as specified and directed.

TABLE DRESSING GENTS (MAP), Drg No. FD-FD/ E6/ MAP/ 16 Removal of old unserviceable existing back ply of looking mirror and S&F new back ply wood 1200 mm x 600 mm, 12mm thick, teak face plywood BWR grade complete all as specified and shown on drawing .

Replacement of looking mirror with S&F new looking mirror of size 1190 mm x 590 mm x 5.5 mm thick as approved.

Replacement of glass shelves with S&F new glass shelves 5.5 mm thick supproted on runner/ ass holder as per existing size as specified and directed.

Removal of old unserviceable teak wood frame with supply & fix teak wood frame existing size of mirror frame made to shape as per existing size and as directed.

Removal of old unserviceable side with supply & fix new sides of prelaminated particle board as per existing size shown on drg as directed.

Removal of old unserviceable teak legs with supply & fix teak wood legs 450 mm x 38 mm x 38 mm of existing size and shape as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dressing gents over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR SHOE RACK STEEL SIZE 880 MM X 845 MM X 300 MM, Drg No. FD-FD/ E6/ MAP/ 02 Removing old worn out 3mm dia MS rod and S&F new MS rod 3mm dia horizontal spacing as existing shape and size as directed.

Taking down old MS pipe and S&F new MS pipe 25 mm dia as per existing shape and specified shown on drg and directed .

Removing old worn out shoe and S & F new hard rubber shoe of best quality complete all as shown on drg and as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of shoe rack steel complete all as specified and directed.

REPAIR TO TEAPOY VERANDAH, Drg No. FD-1118 & 35 (M) Removing of unserviceabletop and S & F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white with 4 mm thick TW beading all-round the teapoy verandah.

Removing of old unserviceable conduit pipe and S&F of 19mm dia MS conduit pipe including one coat of synthetic enamel paint over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Removing of old existing unserviceable side strip & S&F of new side strip made of 25 mm x 3 mm flat iron mild steel, including making hole complete all as specified and directed.

Removing of old existing unserviceable long strip & S&F of new long strip made of 25 mm x 3 mm flat iron mild steel, including making hole complete all as specified and directed.

S&F of rubber shoe superior quality for teapoy verandah all as directed.

M&L for painting with one coat of synthetic enamel black paint including preparation of surfaces of teapoy verandah complete all as specified and directed.

REPAIR TO TABLE DRESSING LADIES, Drg No. FD-251, 32, 378 Dismantling/ taking out carefully old existing broken top of table dressing ladies of any description, in any position and with S&F new top table dressing ladies of 18mm thick pre-laminated particle board exterior grade all as shown on drawing , specified and directed.

Dismantling/ taking out carefully old existing broken side of table dressing ladies of any description, in any position and with S&F new side of table dressing ladies of 18mm thick pre-laminated particle board exterior grade all as shown on drawing , specified and directed.

Replacement of side glass 5.00 mm thick shutter with approved aluminium channel complete all as shown on drawing, specified and as directed .

Replacement of bottom 12mm thick commercial ply all as directed.

Replacement of U/S mirror 5mm thick with S&F new 5mm thick mirror 365 mm x 1220 mm x 5 mm thick all as specified and directed.

Replacement of back frame with S&F new back frame of 6mm commercial ply and connected components made out of 45mm x 40mm teak wood all as shown on drawing , specified and directed.

Replacement of chromium plated knob 25 mm dia, best quality and as approved by Engr-in-Charge.

Replacement of 12mm thick 900 mm x 380 mm commercial back ply of box fixed with screws and nail all specified and as directed.

Replacement of new drawer of table dressing ladies as on drawing, specified and as directed.

Replacement of legs of table dressing ladies of 1st class HW teak wood all as shown on drawing, specified and as directed.

Replacement of long rail to leg frame work of table dressing ladies of Ist class H.W. MP Teak wood all as shown on shown on drawing, specified and as directed.

Replacement of short rail of frame work to leg of 1st class HW teak wood of table dressing ladies all as shown on drawing, specified and as directed.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dressing ladies over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIRS TO TABLE DRESSING GENTs, Drg No. FD-230, 379, 394 Dismantling/ taking out carefully old existing broken top of table dressing gents of any description, in any position and with S&F new top table dressing gents of 18mm thick pre-laminated particle board exterior grade including beading all as shown on drawing , specified and directed.

Dismantling/ taking out carefully old existing broken bottom of table dressing gents of any description, in any position and with S&F new bottom of table dressing gents of 18mm thick pre-laminated particle board exterior grade including beading all as shown on drawing , specified and directed.

Dismantling/ taking out carefully old existing broken side (left/ right) of table dressing gents of any description, in any position and with S&F new side (left/ right) of table dressing gents of 18mm thick pre-laminated particle board exterior grade including beading all as shown on drawing , specified and directed.

Replacement of back ply of 12 mm thick all as shown on drawing , specified and directed.

Replacement of drawer with S&F new drawer made to shape all as shown on drawing , specified and directed.

Replacement of knob with S&F new chromium plated knob 25mm dia all as specified and shown on drg.

Replacement of mirror of size 380 mm x 160 mm x 5 mm thick all as specified and shown on drg.

Replacement of back ply of mirror frame and S&F new back ply of mirror frame 6mm thick commercial all as specified and shown on drg.

Replacement of hanging key plate of mirror frame/ rectangular box and S&F new hanging key plate all as specified and shown on drg.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of table dressing gents over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO SIDE BOARD, Drg No. FD-261 Removing of old U/S top and S & F new top of 18 mm thick pre- laminated particle board exterior grade ISI Marked teak finish on one side and other side white including 4 mm thick TW beading all as specified and directed.

Removal of old unserviceable existing back of side board and S&F new back ply of 6mm thick commercial plywood of existing size complete all as specified and shown on drawing.

Removal of old unserviceable/ broken legs and S&F new legs of 1st class hard wood (Shisham) of existing shape and size complete all as specified and shown on drawing and as directed.

Removal of old unserviceable/ broken bottom long rail and S&F new long rail of of 1st class hard wood (Shisham) of existing shape and size duly planned and smooth complete all as specified and shown on drawing.

Removal of old unserviceable/ broken bottom short rail and S&F new short rail of of 1st class hard wood (Shisham) of existing shape and size duly planned and smooth complete all as specified and shown on drawing.

Removal of old unserviceable/ broken sides of side board and S&F new sides of 18 mm thick pre-laminated particle board exterior grade as per existing shape & size complete all as specified and shown in drawing .

Removal of old unserviceable/ broken partition of side board and S&F new partition of 18 mm thick pre-laminated particle board exterior grade as per existing shape & size complete all as specified and shown in drawing .

Removal of old unserviceable/ broken shelf of side board and S&F new shelf of 18 mm thick pre-laminated particle board exterior grade as per existing shape & size complete all as specified and shown in drawing .

Removal of old unserviceable/ broken shutter of side board and S&F new shutter of 18 mm thick pre-laminated particle board exterior grade as per existing shape & size including 4 mm thick TW beading complete all as specified and shown in drawing .

Removal of old unserviceable/ broken existing drawer components of side board and S&F new drawer components (front,back & sides,shelf) as per existing shape and size complete all as specified and shown in drawing.

Replacement of chromium plated knob 35/ 40mm dia, best quality and as approved by Engr-in-Charge.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of side board except bottom over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO RECEIPTACLE WITH BUCKETS, DRG NO. FD-43(M) Taking down oldunserviceable GI bucket and S&F of new GI bucket and all as specified and shown on drg.

M&L for two coats of synthetic enamel black paint in side and out side in iron portion including preparation of surfaces, revited of all loose joints and removal of all dents, filling with putty complete all as specified and directed.

REPAIR TO CHAIR CBA SPL WITH HAND REST, Drg No. 120 (M) Removing of old existing unserviceable seat frame and S&F new seat frame of 1st class hard wood (shisham) fixed with suitable MS screws including canning with 2mm wide half round superior quality of cane and applying two coats of french polish glossy finish all as shown on drawing & as directed.

Description all as per item No 103.00 here-in-before but back frame.

Removing of old unserviceable hand rest and S&F new hand rest made out of 18 mm thick pre-laminated particle board teak finish made to shape and fixed in position with suitable steel screws complete including PVC edging on all round of hand rest all as shown on drawing and as directed.

Removing of old unserviceable shoe/ cap and S&F new hard PVC rubber shoe/ cap of superior quality for chair CBA special with hand rest complete all as shown on drawing and as directed .

M&L for preparation of old existing steel surfaces of chair CBA special with hand rest and painting with one coat of synthetic enamel paint on steel frame complete all as specified and directed.

REPAIR TO CHAIR EASY WITH CUSHION, Drg No. FD- 229/ 358 Taking out worn out cushion of seat covered with rexine febric and S&F new seat 75 mm thick polyurethene cushion of 32 density covered with polyrauthine febric of superior quality as per existing shape and size and as directed.

Description all as per item No 108.00 here-in-before but back.

Taking unserviceable ply of seat & back and S&F 12 mm thick commercial plywood of chair easy as per existing size and shape all as directed.

Dismantling/ taking down old existing broken rear leg of the chair Easy of any description and in any position and S&F new rear leg (left/ right) made to shape, fixed in position all as specified and shown on drg.

Description all as per item No 111.00 here-in-before but front leg (left/ right) .

Description all as per item No 111.00 here-in-before but replacement of side rails (front, rear & left/ right).

Description all as per item No 111.00 here-in-before but replacement of side rails (front,rear & left/ right ) for back rest

Description all as per item No 111.00 here-in-before but replacement of top / bottom rail in between of rear legs .

Description all as per item No 111.00 here-in-before but replacement of front support rail.

Description all as per item No 111.00 here-in-before but replacement of arms rest.

Description all as per item No 111.00 here-in-before but replacement of nylon buffer of superior quality fixed with suitable size steel screws.

M&L for two or more coats of french polishing including preparation of surfaces to achieve glossy finish to old and new surfaces of chair easy off sorts over and including a coat of wood filler & tightening of all loose components comlpete all as specified and as directed.

REPAIR TO SIDE RACK STEEL 3/4 SPACES, Drg No. FD-1023, 97 (M) M&L for preparation of existing steel surfaces of rack steel and painting with one coat of synthetic enamel paint on steel rack by spray gun complete all as specified and directed.

Taking down old unserviceable steel nut and bolts and S&F new mild steel nut and bolts of shape & size as per existing and as directed.

TUCK WELDING : M&L for jointing of brocken part of steel furniture items as and where required through welding all as specified and directed.

REPAIR/ REWEAVING OF CHARPOY GI PIPE, Drg No. FD-220 (M) Dismantling / taking down of existing unserviceable newar from GI pipe charpoy and weaving both ways with superior quality of nylon newar 50 mm to 55mm wide ( weight not less than 1.50 Kg per charpoy) including tightening of all components of charpoy in the true position complete all as specified and and shown on drg.

Removing of old unserviceable check nut of G.I. charpoy and replacement with new GI Check nut, 9mm thick suitable for charpoy GI Pipe 32 mm bore pipe complete all as specified & directed.

Removing of old unserviceable elbow of charpoy GI pipe and S&F three way GI elbow 32 mm bore medium grade, ISI marked complete all as specified & directed.

REPAIR TO SOFA SET FIVE SEATER STEEL SPL TYPE, DRG No. TP/ Godrej Removing old unserviceable nylone newar from seat and back of sofa set 05 seater and S & F new nylone niwar by weaving of superior quality of approved shade (50-55mm wide) complete all as specified & directed.

Removing old unserviceable polyurethane foam from seat and supply and fixing new polyurethane foam 100 mm thick covered with tepestary cloth (density not less than 32 kg/ cubic mtr) as per existing shape and size and as directed.

Description all as per item No 127.00 here-in-before but back.

Description all as per item No 127.00 here-in-before but 50 mm thick hand rest (left/ right).

Removing old unserviceable nylone buffer supply and fixing new nylone buffer as per existing shape and size and as directed.

Removing old unserviceable nut and bolt and supply and fixing new nut and bolt as per existing shape and size and as directed.

Removing old unserviceable rubber bush from joints and supply and fixing rubber bush as per existing shape and size and as directed.

M&L for painting to all exposed surfaces of steel frame of sofa set five seater with two coats of synthetic enamel black paint including preparation of surfaces complete all as specified and directed.

M/S SUMESH FURNITURE

Anand Construction

M/S DURGA ASSOCIATES