REPAIR/ MAINTENANCE TO ALL TYPES OF WOODEN AND STEEL FURNITURE OF CERTAIN UNIT UNDER GE GOLCONDA

Amount

Removing old unserviceable following parts of table dining 6 persons and replacing with new one as shown on drawing FD-273 (Sht 1/2 & 2/2) Table top, 18 mm thick pre-laminated particle board one side natural teak shade and other side white of size 1500 X 900 mm with 4 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same poition as shown on drg & as directed by Engr-in-charge.

First class HW (TW) leg of size 760x75x40 mm for table dining six persons as shown on drg and as directed by Engr-in-charge.

Short rail of first class HW (TW) of size 900x10x25 mm for table dining six persons as shown on drg and as directed by Engr-in-charge.

Long rail of first class HW (TW) of size 1500x10x25 mm for table dining six persons as shown on drg and as directed by Engr-in-charge.

Removing old unserviceable following parts of table dining 8 persons and replacing with new one as shown on drawing FD-273 (Sht 1/2 & 2/2):- Table top, 18 mm thick pre-laminated particle board one side natural teak shade and other side white of size 1800 X 900 mm with 4 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same poition as shown on drg & as directed by Engr-in-charge.

First class HW (TW) leg for table dining eight persons as shown on drg and as directed by Engr-in-charge.

Short rail of first class HW (TW) for table dining eight persons as shown on drg and as directed by Engr-in-charge.

Long rail of first class HW (TW) for table dining eight persons as shown on drg and as directed by Engr-in-charge.

Material and labour for removing old unserviceable following parts of APO bed and replacing with new one as shown on drawing APO BED (Drg No - Godrej Model PL13/A3-D32911):- Plywood top BWR Gde confirming to IS, 19 mm thick complete all as shown on drg and directed by Engr-in-charge

Head board complete with plank support, PVC bush, PVC beading & suitable star screws as per drawing.

Foot board complete with plank support, PVC bush, PVC beading & suitable star screws as per drawing.

Side Rail 25mm pre-laminated board as per drawing.

MS Stiffener complete all as shown on drg and as directed by Engr-in-charge.

MS Bracket with star type screw of APO Bed shape and size as per shown on Drg.

Removing old unserviceable following parts of table center and replacing with new one as shown on drawing FD-274:- Table top of table centre, 18 mm thick pre-laminated particle board one side natural teak shade and other balancing white of size 900 X 450 mm with 4 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same position as per drg & as directed by Engr-in-charge.

First class HW (TW) Legs of table centre, size as per drawing and as directed by Engr-in-charge.

First class HW (TW) stiffener/ short rail of table centre, size as per drawing and as directed by Engr-in-charge.

First class HW (TW) Top rail (Long) of table centre size as per drawing and as directed by Engr-in-charge.

Removing old unserviceable following parts of teapoy and replacing with new one as shown on drawing FD-232/278:- Top of teapoy, 18 mm thick pre-laminated particle board one side natural teak shade and other balancing white of size 600 X 450 mm with 4 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same position as per drg & as directed by Engr-in-charge.

First class HW (TW) Legs of teapoy, size as per drawing and as directed by Engr-in-charge.

First class HW (TW) Top rail of teapoy size as per drawing and as directed by Engr-in-charge.

First class HW (TW) bottom rail of teapoy size as per drawing and as directed by Engr-in-charge.

First class HW (TW) stiffener of teapoy, size as per drawing and as directed by Engr-in-charge.

Removing old unserviceable following parts of Peg table and replacing with new one as shown on drawing FD-251/378:- Top of peg table, 18 mm thick pre-laminated particle board natural teak shade one side and other side balancing white of size 450 X 380 mm with 4 mm thick teak wood beading all around after necessary cutting and made to size and shape and fixing in same position as shown on drg & as directed by Engr-in-charge.

First class HW (TW) Legs of Peg table, size as per Drawing and as directed by Engr-in-charge.

First class HW (TW) side rail top (Long) of Peg table size as per drawing and as directed by Engr-in-charge.

First class HW (TW) side rail top (short) of Peg table size as per drawing and as directed by Engr-in-charge.

Removing old unserviceable following parts of Table 900 X 600 X 760 mm with or without drawer and replacing with new one as shown on drawing FD-223/224/283/284 :- Table top, 18 mm thick pre-laminated particle board one side natural teak shade and other balancing white of size 900 x 600 mm with 4 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same position as per drg & as directed by Engr-in-charge.

First class HW (TW) Legs of table 900 x 600 x760 with or without drawer, size as per drawing and as directed by Engr-in-charge.

First class HW (TW) top rail long (single piece) of table 900 x 600 x 760mm with or without drawer, size as per drawing and as directed by Engr-in-charge.

First class HW (TW) side rail short (single piece) of table 900 x 600 x 760mm with or without drawer, size as per drawing and as directed by Engr-in-charge.

Drawer complete with Knob of table 900 x 600 x 760mm with drawer, size as per drawing and as directed by Engr-in-charge.

Removing old unserviceable following parts of table dressing gents and replacing with new one as shown on drawing FD-230/379 :- Mirror with ply wood backing ,Teak wood frame, Teak wood vertical support as per drawing & as directed by Engr-in-charge.

Ply wood for back of box of table dressing gents size as specified and shown on drawing and as directed by Engr-in-charge.

Ply wood for bottom of box of table dressing gents size as specified and shown on drawing and as directed by Engr-in-charge.

Pre laminated particle board one side natural teak shade and other side balancing white for top of table dressing gents as specified and shown on drawing and as directed by Engr-in-charge.

Pre laminated particle board one side natural teak shade and other side balancing white for side of box of table dressing gents as specified and shown on drawing and as directed by Engr-in-charge.

Drawer complete with knob for table dressing gents as specified and shown on drawing and as directed by Engr-in-charge.

Removing old unserviceable following parts of table dressing ladies and replacing with new one as shown on drawing FD-251/378:- Mirror with ply wood backing ,Teak wood frame, Teak wood vertical support as specified and shown on drawing & as directed by Engr-in-charge.

First class HW (TW) Legs of table dressing ladies size as per drawing and as directed by Engr-in-charge.

Drawer complete with knob of table dressing ladies size as per drawing and as directed by Engr-in-charge.

Taking out unserviceable shutter from table dressing ladies and supply and fix new shutter made of 18mm thick pre-laminated particle board exterior grade one side teak face other side balancing white including handle complete all as specified, shown on drg and directed by Engr-in-charge.

Removing following old unserviceable parts of side board and replacing with new one as shown on drawing FD-251/378:- Shutters with 18 mm thick pre-laminated particle board one side natural teak shade and other balancing white with 6 mm thick teak wood beading all around, shutter shall be fixed to the side board with full lengh MS piano hinges including 2 Nos of Knobs & one lock four lever brass all as shown on drawing and as directed by Engr-in-charge.

Ply wood commercial type cut to size and fixed in position at the back side of the side board with suitable wood screw complete all as shown on drawing and as directed by Engr-in-charge.

Shelves made out of 12mm thick ply wood commercial type for side board as per drawing and as directed by Engr-in-charge.

First class HW (TW) legs for side board as per drawing and as directed by Engr-in-charge.

First class HW (TW) bottom stiffeners for side board as per drawing and as directed by Engr-in-charge.

Drawer complete with knob for side board as specified and shown on drawing and as directed by Engr-in-charge.

Pre laminated particle board with teak face one side and other side balancing white for top portion of the side board as specified and shown on drawing and as directed by Engr-in-charge.

Pre laminated particle board one side teak face other side white for bottom with 3 mm x 19 mm thick teak wood edging for side board size as per drawing and as directed by Engr-in-charge.

Pre laminated particle board one side teak face other side white for side with 3 mm x 19 mm thick teak wood edging for side board size as per drawing and as directed by Engr-in-charge.

Chair easy FD-229 Taking out/Dismantling worn out/ Damaged/ defective front leg from chair easy and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) & fixed in same position as per drg & as directed by Engr-in-Charge.

All as per item No 52 but rear leg as per drg.

All as per item No 52 but front rail as specified and shown on drg (Single Piece).

All as per item No 52 but rear rail as specified and shown on drg (Single Piece).

All as per item No 52 but front frame & back frame (seat) all as specified and shown on drawing (Single Piece).

All as per item No 52 side frame all as specified and shown on drawing (Single Piece).

Arm all as specified and shown on drawing (Single Piece).

Canning the chair with 2mm plastic cane and 4mm cane for beading of Chair easy DRG No FD-229 all as per drawing and as directed by Engr-in-charge.

Chair Dining FD-228/279: Taking out/Dismantling worn out/ Damaged/ defective front leg from chair and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) & fixed in same position as per drg & as directed by Engr-in-Charge.

All as per item No 60 but rear leg as per drg.

All as per item No 60 but Front rail as per drawing.

All as per item No 60 but Rear rail as per drawing.

All as per item No 60 but Side rail (Single piece) as per drawing.

All as per item No 60 but Teak wood stiffener (back support) (Single piece) as per drawing.

All as per item No 60 but Bottom stiffeners as per drawing.

Canning the chair with 2mm plastic cane and 4mm cane for beading of Chair dining DRG No FD-228/279 all as per drawing and as directed by Engr-in-charge.

Chair Writing FD-250/280: Taking out/ Dismantling of worn out/ Damaged/ defective leg from chair writing and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) & fixed in same poition as per drg & as directed by Engr-in-Charge.

All as per item No 68 but Rear leg as per drawing.

All as per item No 68 but Front rail as per drawing.

All as per item No 68 but Rear rail as per drawing.

All as per item No 68 but Side rail (Single piece) as per drawing.

All as per item No 68 but Arm (Handle) as per drawing.

All as per item No 68 but Bottom stiffener.

Canning the chair with 2mm plastic cane and 4mm cane for beading of Chair writing DRG No FD-250/280 all as per drawing and as directed by Engr-in-charge.

Chair dining Offrs FD/MAP-II/04 : Taking out/ Dismantling of worn out/ Damaged/ defective front leg as per drawing from chair dining long back and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) & fixed in same poition as per drg & as directed by Engr-in-Charge.

All as per item No 76 but Rear leg as per drawing.

All as per item No 76 but Front rail as per drawing (Single Piece).

All as per item No 76 but Rear rail as per drawing (Single Piece).

All as per item No 76 but Bottom stiffeners as per drawing.

All as per item No 76 but Cushioned seat as per drawing.

Removing of old u/s foam and s&f new 75 mm thick foam ISI marked 40 density of size 430X380 mm fixed on 6mm commercial ply wood BWR gde complete and all as specified/directed. (for one foam)

Removing of worn out tapesty and lining cloth from cushion and s&f new tapesty cloth cost not less than Rs 250/- per sqmtr and lining cloth of size of 430x380x75 mm, shade and colour as approved, complete all as specified/directed. (for one cover)

CHAIR MWG 520X483 MM (CEHZ/FD/13) Removing old u/s arm rest and s&f new 1st class HW (TW) arm rest of size 533.2x50.8x38.10 mm complete all as specified/directed and as shown on drg.

Removing old u/s front leg and s&f new 1st class HW (TW) front leg of size 647.7x38.1x50.8 mm complete all as specified/directed and as shown on drg.

Removing old u/s rear leg and s&f new 1st class HW (TW) rear leg of size 901.7x38.1x50.8 mm complete all as specified/directed and as shown on drg.

Removing old u/s side rail and s&f new 1st class HW (TW) side rail of size 482.6x31.75x63.5 mm complete all as specified/directed and as shown on drg.

Removing old u/s seat front rail and s&f new 1st class HW (TW) front rail of size 520.7x31.75x63.5 mm complete all as specified/directed and as shown on drg.

Removing old u/s seat rear rail and s&f new 1st class HW (TW) rear rail of size 482.6x31.75x63.5 mm complete all as specified/directed and as shown on drg.

Chair Dining JCO/OR : FD/MAP-II/05 Taking out/Dismantling of worn out/ Damaged/ defective front leg from Chair Dining MAP Drg and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) including polishing the complete wooden parts with two or more coats until high glossy finish is obtained after necessary preparation of surface & fixed in same position as per drawing & as directed by Engr-in-charge by Engr-in-Charge.

All as per item No 90 but rear leg as per drawing.

All as per item No 90 but PVC Seat of Chair dining JCO/OR : FD/MAP-II/05 as per drawing.

All as per item No 90 but Front rail as per drawing.

All as per item No 90 but Rear rail as per drawing.

All as per item No 90 but Side rail (Single piece) as per drawing.

All as per item No 90 but Teak wood stiffener (back support) (Single piece) as per drawing.

All as per item No 90 but Bottom stiffeners as per drawing.

First class hard wood (Teak wood) bracket, joining leg and front frame/ back frame/ side frame / long rail / short rail single piece, triangular in shape size 75 x 75, 20mm thick as directed by Engr-in-charge including taking out existing.

First class HW (TW) triangular bracket of size 100 x 100, thickness 25mm joining leg and long/ short rail complete as directed by Engineer in Charge including taking out existing.

First class HW (TW) triangular bracket of size 150 x 150, thickness 25mm joining leg and long/ short rail complete as directed by Engineer in Charge including taking out existing.

Locker Bed Side Steel (FD-1029) Removing unserviceable handle and S & F new CP handle 'D' type 100mm long complete all as specified & directed and as shown on drg.

Locker Bed Side Steel (FD-1029) Removing unserviceable hasp & staple and S & F new CP hasp & staple75mm long complete all as specified & directed and shown on drg.

Locker Bed Side Steel (FD-1029) Removing unserviceable hinges and S & F new MS hinges 75 mm long complete as specified & directed and as shown on drg.

Locker Bed Side Steel (FD-1029) Removing old unserviceable leg and S & F new leg of size 440x70x100 mm made out of MS sheet 1.25 mm thick, made to shape and fixing in the same position by welding including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drg.

Locker Bed Side Steel (FD-1029) Removing old unserviceable shelf carefully and S & F new shelf made out of MS sheet 1mm thick made to shape and fixing the same properly in position including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drg.

Locker Bed Side Steel (FD-1029) Removing old unserviceable door single leaf carefully and S & F new door single leaf made out of MS sheet 1mm thick made to shape & size and fixing the same properly in position including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drg.

Locker Bed Side Steel (FD-1029) M & L for painting one coats of synthetic enamel paint of approved shade both internally and externally to Locker Bed Side Steel of MES pattern including Removing dents applying putty to level the surface before painting all as specified & directed and shown on drawings.

Almirah Steel Medium/ Small (FD-350/1032/1034) Removing u/s handle and S & F of 125 mm long chromium plated handle for almirah steel large and medium all as shown on drg and as directed by Engr-in-Charge.

Removing old u/s lock and S & F of new lock 6 levers with duplicate keys complete all as shown on drg and as directed by Engr-in-Charge.

Removing old u/s clips and S & F of new clips made out of 3mm MS plate made to shape and size complete all as shown on drawing and as driected (For one clip).

Removing old u/s cover and S & F of new cover made out of 1mm thick (size as shown on drg) MS sheet made to suitable for locking device complete all as specified/ directed and shown on drg.

Removing old u/s shelf carefully and S & F of new shelf made out of MS sheet 1mm thick bent to shape and fixed the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drawing. (For one shelf)

Removing old u/s door single leaf carefully and S & F of new door single leaf made out of MS sheet 1mm thick bent to shape and fixed the same properly in position including painting of single coat of red oxide primer as specified/directed and shown on drawing. (For one door)

Removing old u/s legs and S & F of new legs made out of MS sheet 1.25 mm thick of size 420x70x100 mm made to shape and fixed in the same position including painting of single coat of red oxide primer as specified/directed and shown on drg. (For one leg)

M & L for painting two coats of synthetic enamel paint approved shade both internally and externally to Almirah Steel Medium/ Small of MES pattern including removing of dents applying putty to the level of the surface before painting all as specified/ directed and shown on drawings. Almirah Steel Medium/ Small (FD-350/1032/1034)

Almirah Steel Large (FD-1031/1033/351/TP) Removing old u/s lock and S & F of new lock 6 levers with duplicate keys complete all as shown on drg and as directed by Engr-in-Charge.

Removing u/s handle and S & F of 125 mm long chromium plated handle for almirah steel large all as shown on drg and as directed by Engr-in-Charge.

Removing old u/s clips and S & F of new clips made out of 3mm MS plate made to shape and size complete all as shown on drawing and as driected (For one clip).

Removing old u/s cover and S & F of new cover made out of 1mm thick (size as shown on drg) MS sheet for almirah large steel made to suitable for locking device complete all as specified/directed and shown on drg.

Removing old u/s shelf of almirah large carefully and S & F of new shelf made out of MS sheet 1mm thick shape & size and fixing the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drg. (For one shelf)

Removing old u/s door single leaf carefully and S & F of new door single leaf for almirah large made out of MS sheet 1mm thick shape & size and fixing the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drg.

Removing old u/s legs and S & F of new legs made out of MS sheet 1.25 mm thick of size 485x70x100 mm for almirah large made to shape and fixing in the same position including painting of single coat of red oxide primer as specified/directed and shown on drawing. (For one leg)

M & L for painting two coats of synthetic enamel paint approved shade both internally and externally to the following furniture article of MES pattern including removing of dents applying putty to the level of the surface before painting all as specified/ directed and shown on drawings. Almirah Steel Large (FD-1031/1033/351/TP)

Table 900x600x760 mm Drg No FD-1007/1008 Removing old unserviceable table top and S & F new table top 900x600 mm using 18 mm thick prelaminated particle board exterior grade one side teak wood shade and other side balancing white with 18 x 4mm thick teak wood beading all around the top of table complete all as specified & directed and shown on drg.

Table 900x600x760 mm Drg No FD-1007/1008 Removing rusted/ unserviceable long rail/ stiffner and S & F new long rail/stiffner made out of 25 mm MS square tube 1.6 mm thick, 750mm long, fixed by means of continuous welding to legs/ stiffner to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer complete all as specified & directed and shown on drawing.

Table 900x600x760 mm Drg No FD-1007/1008 Removing rusted/ unserviceable Short rail/ stiffner and S & F shot rail/ stiffner made out of 25 mm MS square tube 1.6 mm thick, 742mm long, fixed by means of continuous welding to legs to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer with preparation of surfaces complete all as specified & directed and shown on drawing.

Table 900x600x760 mm Drg No FD-1007/1008 Removing rusted/ unserviceable leg S & F new leg made out of 25 mm MS square tube 1.6 mm thick, 742mm long, fixed by means of continuous welding to Rails/stiffner to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer with preparation of surfaces complete all as specified & directed and shown on drawing.

Table 900x600x760 mm Drg No FD-1007/1008 Removing old unserviceable drawers from table 900 X 600 X 760 mm steel and supply and fixing new drawer steel complete made out 1 mm thick MS sheet bent to shape & made to size including painting with one coat of synthetic enamle paint over a coat of red oxide primer after necessary preparation of surface complete all as directed.

Table 900x600x760 mm Drg No FD-1007/1008 M & L preparation of surfaces and painting one coat of synthetic enamel paint approved shade both internally and externally to steel surfaces of Table 900x600x760 mm Drg No FD-1007/1008 of MES pattern by removing dents applying putty to level the surface before painting including Removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable back plywood from Table Bed side and S&F new back made of 6mm thick commercial plywood exterior grade one side teak wood shade and other side balancing white ISI Marked complete all as specified and shown in Drg.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable shelves from Table Bed side and S&F new shelves made of 18mm thick pre-laminated particle board exterior grade one side teak wood shade and other side balancing white duly provided with 4 mm thick Teak wood beeding complete all as specified and Shown in Drg.

Table Bed side (FD/E6/MAP/15(R) Taking out unserviceable side from Table Bed side and S&F new side made of pre-laminted particle board exterior grade one side teak face and other side balancing white with 4mm thick teak wood beading matching with the existing shape & size complete all as specified and directed by Engr-in-charge.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable top/bottom from Table Bed side and S&F new top/bottom made of 18mm thick pre-laminated particle board exterior grade one side teak face other side balancing white complete all as specified, shown on drg and directed by Engr-in-charge.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable shutter from Table Bed side and supply and fix new shutter made of 18mm thick pre-laminated particle board exterior grade one side teak face other side balancing white including handle complete all as specified, shown on drg and directed by Engr-in-charge.

Table Bed side (FD/E6/MAP/15(R)) Taking out unserviceable drawer from Table Bed side and supply and fix new drawer made of 12mm thick commercial ply including handle complete all as specified, shown on drg and directed by Engr-in-charge.

Table Bed side (FD/E6/MAP/15(R)) M & L painting one coat of synthetic enamel paint of approved shade to steel parts of Table bed side steel of MES pattern including preparation of surfaces all as specified, directed and shown on drawings.

Chair writing cushioned FD/E6/MAP/12 Taking out / Dismantling of worn out / Damaged / defectiive seat/ Back of Chair writing cushioned FD/E6/MAP/12 and replacing the same with new seat/ back of MES pattern and fixing in same position including painting the steel part and replacing handle with rubber bush as per drg & as directed by Engr-in-Charge.FD-E6/MAP/12.

Form with back (FD-78,322,F-8) M & L for painting one coat of synthetic enamel paint of approved shade to steel parts and polishing to wooden parts with high quality wood polish to Form with back of MES pattern including preparation of surfaces all as specified & directed and shown on drawings.

Form without back (FD-77,1027) M & L for removing and fixing of top made of plywood with sunmica and teak wood beading of same size and shape with proper fixtures including polishing wooden parts with high quality wood polish of Form without back (FD-77,1027) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings.

Form without back (FD-77,1027) M & L for painting with one coat of synthetic enamel paint of approved shade to steel parts and polishing to wooden parts with high quality wood polish of Form without back (FD-77,1027) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings.

Filing Cabinet(TP) M & L for painting one coats of synthetic enamel paint of approved shade both internally and externally to Filing cabinet of MES pattern including Removing dents applying putty to level the surface before painting all as specified & directed and shown on drawings.

CHAIR TUBULAR STEEL WITH ARMS (FD-75) Removing old u/s seat and s&f new seat made out of first class hard well air seasoned wood of size 460mm x 415mm and canning the chair with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers complete all as specified/directed and as shown on drg.

Removing old u/s back and s&f new back made out of first class hard well air seasoned wood of size 460x385 mm and canning the chair with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers complete all as specified/directed and as shown on drg.

Removing old u/s arm rest and s&f new arm rest made out of 1st class HW (TW) with suitable size of screws complete all as specified/directed and as shown on drg.

M & L for painting one coat of synthetic enamel paint of approved shade to steel surfaces of Chair tubular steel with arms (FD-75) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. Chair tubular steel with arms (FD-75).

CHAIR TUBULAR STEEL WITH OUT ARMS (FD-75M) Removing old u/s seat and s&f new seat made out of first class hard well air seasoned wood of size 405x380 mm and canning the chair with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers complete all as specified/directed and as shown on drg.

Removing old u/s back and s&f new back made out of first class hard well air seasoned wood of size 405x380 mm and canning the chair with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers complete all as specified/directed and as shown on drg.

Removing old u/s rubber bush and s&f new synthetic rubber bush for chair tubular with and with out arms complete all as specified/directed and as shown on drg.

M & L for painting one coat of synthetic enamel paint of approved shade to steel surfaces of Chair tubular steel without arms (FD-75M) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. Chair tubular steel without arms (FD - 75M).

CHAIR VERANDAH (FD-259) Removing of old u/s cane plastic from chair verandah, cleaning tubular surface & necessary preparation and spray painting with first quality synthetic enamel paint white and finally recanning the chair verandah with 4mm width new plastic cane as per Godrej Pattern/ drawing and also fix new rubber shoes for all four legs complete all as specified/directed and as shown on drg.

CHAIR COMPUTER (TP) Removing of u/s back portion tapestry cloth and s&f new back portion tapestry cloth complete all as specified/directed and as shown on drg.

Removing of u/s seat portion tapestry cloth and s&f new seat portion tapestry cloth complete all as specified/directed and as shown on drg.

Removing of u/s tilt lcoking system and s&f new tilt lcoking system complete all as specified/directed and as shown on drg.

Removing of u/s pneumatic gas lift system complete and s&f pneumatic gas lift system complete all as specified/directed and as shown on drg.

Removing of u/s five pronged pedestal wheel complete and s&f new five pronged pedestal wheel set complete all as specified/directed and as shown on drg.

Removing of u/s arms rest set complete and s&f new armsrest set complete all as specified/directed and as shown on drg.

TABLE DINING ORs(FD-165(M)) Removing of old unserviceable table top of table dining OR and supply and fixing new table table top made out of 18mm thick block board of size 1830 mm x 680 mm including covering the top surface of dining top with 22 gauge Aluminium sheet cut to size and fixed with MS Screws of size all as per drawing and as directed by Engr-in-charge. Drawing NO:- FD-165

Legs made out of MS 25 mm Square tube 1.2mm thick 760 mm long fixed by means of continuous welding to stiffeners of Table Dining ORs to match with the existing components including painting the entire new exposed steel surface with two coat of first quality synthetic enamel paint over a coat of zinc chromate primer complete with rubber bushes superior quality all as per drawing and as directed by Engr-in-charge.Drawing NO:- FD-165

Table dining ORs 1900x685x760 mm (Drg No FD-165) Removing rusted/ unserviceable long rail/ long stiffner and S & F new long rail/ long stiffner made out of 25 mm MS square tube, 1.6 mm thick, 1550 mm long, fixed by means of continuous welding to legs/ short stiffner to match the existing components including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drawing.

Table dining ORs 1900x685x760 mm (Drg No FD-165) Removing rusted/ unserviceable short rail/ short stiffner and S & F new short rail/ short stiffner made out of 25mm MS square tube, 1.6 mm thick 465 mm long, fixed by means of continuous welding to legs to match the existing components including painting with one coat of synthetic enamle paint over a coat of red oxide primer all as specified & directed and shown on drawing.

Table dining ORs 1900x685x760 mm (Drg No FD-165) M & L for painting one coat of synthetic enamel paint approved shade to steel surfaces of Table dining ORs of MES pattern including Removal of damaged/ unserviceable rubber shoe and S & F with new rubber shoe all as specified & directed and shown on drawings.

TABLE OFFICE CLERK STEEL(FD-84/1004/TP) Removing of old unserviceable table top of office clerk steel and supply and fixing new 18 thick pre laminated particle board interior grade with top face of table with decorative teak wood shade lamination and other side with balancing white lamination including teak wood edging alround table top fixed as per drg and as directed.DRWG NO : FD-1004

Removing of old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel complete made out of 1mm thick MS sheet bent to shape & made to size including painting the new steel surface with two coats of first quality synthetic enamel paint painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed. (Note:-Quoted rate is deemed to be inclusive of painting). DRWG NO :FD-1004/84

Table office officers steel (FD-1003) M & L for painting one coat of synthetic enamel paint approved shade both internally and externally to steel surfaces of table officer office steel by removing dents and applying putty to the level the surface before painting including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings.

TABLE OFFICE OFFICER STEEL(FD-84/1003/TP) Removing of old unserviceable table top of office officers steel and supply and fixing new 18 mm thick pre laminated particle interior grade with top face of table with decorative teak wood shade lamination and other side with balancing white lamination including teak wood edging alround table top fixed as per drg and as directed. DRWG NO :FD-1003

Removing of old unserviceable drawers from table office officers steel and supply and fixing new drawer steel complete made out of 1mm thick MS sheet bent to shape & made to size including painting the new steel surface with two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparatio o fsurface complete all as directed. (Note:-Quoted rate is deemed to be inclusive of painting). DRWG NO : FD-1002/1003

Table office officers/ clerk steel (FD-1003/84M/1004) Removing old UNSV lock for drawers from table clerk/officer steel and S&F new lock 6 lever with duplicate keys to drawer steel complete all as specified and directed

Table office officers steel (FD-1003) M & L for painting one coat of synthetic enamel paint approved shade both internally and externally to steel surfaces of table officer office steel by removing dents and applying putty to the level the surface before painting including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings.

Removing following old unserviceable parts of Bin Linen multipurpose and replacing with new one as shown on drawing FD-251:- Shutters with 18 mm thick pre-laminated particle board one side natural teak shade and other balancing white with 6 mm thick teak wood beading all around, shutter shall be fixed to the item with full lengh MS piano hinges including 2 Nos of Knobs & one lock four lever brass all as shown on drawing and as directed by Engr-in-charge.

Ply wood commercial type cut to size and fixed in position at the back side of the Bin linen multipurpose with suitable wood screw complete all as shown on drawing and as directed by Engr-in-charge.

Shelves made out of 12mm thick ply wood commercial type for Bin linen Multipurpose as per drawing and as directed by Engr-in-charge.

First class HW (TW) legs for Bin linen multi purpose as per drawing and as directed by Engr-in-charge.

First class HW (TW) bottom stiffeners for Bin Linen ulti purpose as per drawing and as directed by Engr-in-charge.

Drawer complete with knob for Bin Linen Multi purpose as specified and shown on drawing and as directed by Engr-in-charge.

Pre laminated particle board with teak face one side and other side balancing white for top portion of the Bin Linen Multi purpose as specified and shown on drawing and as directed by Engr-in-charge.

Pre laminated particle board one side teak face other side white for bottom with 3 mm x 19 mm thick teak wood edging for Bin linen Multi purpose size as per drawing and as directed by Engr-in-charge.

Pre laminated particle board one side teak face other side white for side with 3 mm x 19 mm thick teak wood edging for Bin Linen Multipurpose size as per drawing and as directed by Engr-in-charge.

Racks 6' x 2' x 6'(FD-129/TP) Removing old u/s shelf for Rack steel 6' x2' x 6' carefully and S & F of new shelf of same size made out of MS sheet 1mm thick bent to shape and fixed the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drawing. (For one shelf)

Removing old u/s 2 inch MS iron angular frame for Rack steel 6' x2' x 6' carefully and S & F of new MS iron angular frame of same size and fixing the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drawing.

Hat stand with mirror(FD-36/233) Removing old unsv mirror with plywood backing and S & F new Mirror 440 x 300 x 5mm with ply wood backing ,Teak wood frame, Teak wood vertical support as specified and shown on drawing & as directed by Engr-in-charge.

Removing of old UNSV brass pegs and S & F new Brass pegs and fixing the same properly in same posiion all as specified and directed.

Teapoy Verandah (FD-205/208/383) Removing old unserviceable top from Teapoy Verandah steel and supply and fixing new top 18 mm thick prelaminated particle board exterior grade with top face decorative teak wood shade lamination and other side balancing white lamination including 6mm x 18mm teak wood edging alround top fixed as per drg and as directed.

Teapoy Verandah (FD-205/208/383.) M & L for painting one coat of synthetic enamel paint approved shade to steel surfaces of Teapoy Verandah of MES pattern all as specified & directed and shown on drawings including removal of damaged/ unserviceable rubber shoe and S & F with new rubber shoe all as specified & directed and shown on drawings.

Table 900x900x760 mm Drg No FD-1009 Removing old unserviceable table top and S&F new table top 900x900 mm using 18 mm thick prelaminated particle board exterior grade one side teak wood shade and other side balancing white with 18x 4mm thick teak wood beading all around the top of table complete all as specified & directed and shown on drg.

Table 900x900x760 mm Drg No FD-1009 Removing rusted/ unserviceable top rail and S & F new top rail made out of 25 mm MS square tube 1.6 mm thick, 750mm long, fixed by means of continious welding to legs to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer complete all as specified & directed and shown on drawing.

Table 900x900x760 mm Drg No FD-1009 Removing rusted/ unserviceable leg and S & F new leg made out of 25 mm MS square tube, 1.6 mm thick, 760 mm long leg fixed by means of continuous welding to rails to match the existing components including one coat of synthetic enamle paint over a coat of red oxide primer complete all as specified & directed and shown on drawing.

Table 900x900x760 mm Drg No FD-1009 M & L for painting one coat of synthetic enamel paint approved shade both internally and externally to Table 900x900x760 mm Drg No FD-1009 of MES pattern by removing dents applying putty to level the surface before painting including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings.

M & L for painting two coats of synthetic enamel paint approved shade both internally and externally to Almirah MAP Steel of MES pattern including removing of dents applying putty to the level of the surface before painting all as specified/ directed and shown on drawings. Almirah MAP Steel (FD-1030)

Removing old unserviceable following parts of Table writing and replacing with new one as shown on drawing FD-275:- Table top, 18 mm thick pre-laminated MDF board one side natural teak shade and other side white of size 1145 X 600 mm with 6 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same poition as shown on drg & as directed by Engr-in-charge.

First class HW (TW) leg for table writing as shown on drg and as directed by Engr-in-charge.

First class HW (TW) Top side rail (single piece) of table writing size as per drawing and as directed by Engr-in-charge.

Drawer complete with Knob of table writing size as per drawing and as directed by Engr-in-charge.

First class HW (TW) long rail for table writing size as per drawing and as directed by Engr-in-charge.

First class HW (TW) bottom rail of table writing size as per drawing and as directed by Engr-in-charge.

Shutter of 18mm thick prelaminated particle board one side natural teak shade and other side white of size as per drg with 6 mm thick teak wood edging all around complete with knob/ handle and lock with duplicate keys fixed with and including piano hinges for table writing size as per drawing and as directed by Engr-in-charge.

First class HW (TW) Stiffener bottom of table writing size as per drawing and as directed by Engr-in-charge.

Ply wood 6 mm thick comercial for back of table writing size as per drawing and as directed by Engr-in-charge.

Removing the unserviceable components/ Parts from the Bed plywood top and replacing with new one as shown on drawing Bed plywood FD-246 and all as directed by Engr-in chrage for following :- 12mm thick ply wood top of size 1920mm x 900mm (single piece) BWR Grade fixed to wooden frame with suitable size of MS Screws as ordered all as shown on drg and as directed.

Head side board complete as per drg.

Foot side board complete as per drg.

First class hard wooden long rail of size 90mm x35mm x 1930mm long.

First class hard wooden short rail of size 90mm x 35mm x 900mm long.

First class hard wood legs of size 60mm x 60mm x 600mm high including fixing of rubber rings/ shoes as shown on drg.

First class hard wood stiffeners of size 45mm x 45mm x 900mm long fixed on shorter span to support ply wood top complete all as directed.

Removing old unserviceable following parts of sofa set 5 seater (3 seater plus two single seater) and replacing with new one as shown on drawing FD-281. Back long rail / seat long rail of 1st class HW(Teak Wood) of size 35x70x1680 mm as per drawing and as directed by Engineer-in-charge.

Stiffeners in Seat/back of size 20x50x600 mm as per drawing and as directed by Engineer-in-charge.

1st class HW (TW) arm of size 525x70x35 mm complete all as shown on drg and directed by Engr-in-charge.

M&L 100mm thick foam 40 density of size 21"x22" ISI marked complete as directed by Eng-in-Charge.

Taking down worn out/ damaged tapestry and lining cloth from foam cushion of size of 21"x22"x100mm and supply and stiching new linning cloth and finally covering entire foam with new tapestry cloth, shade and colour as approved complete all as directed by Engr-in-Charge.

Removing old unserviceable following parts of TABLE 900 X 900 X 760 mm and replacing with new one as shown on drawing FD-291 :- Table top, 18 mm thick pre-laminated MDF board one side natural teak shade and other balancing white of size 900 x 900 mm with 6 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same position as per drg & as directed by Engr-in-charge.

First class HW (TW) Legs of table 900 x 900 x760, size as per drawing and as directed by Engr-in-charge.

First class HW (TW) side rail top (single piece) of table 900 x 900 x 760mm, size as per drawing and as directed by Engr-in-charge.

Material and labour for two coat of french polishing to the following furniture article of MES pattern Viz F/FD/DB series or similar items including appying wax for depressed surfaces before polishing all as specified and shown on drgs and directed by Engr-in-charge. Almirah large all types DB-4116,4049

Almirah Medium all types DB-3959,4042

Almirah Mess utensils DB-25A,FD-93

Bed Ply wood top FD-246,247

Desk of various sizes DB-3032

Book case/Book shelf all types DB-4071,3957,4221,2121, FD-237,88

Bin Soild linen DB-3981,FD-244

Chair without Arms (all types) Fd-275,225,16,228,279, FD/MAPII/04 & 05.

Chair with Arms (all types but except Chair Easy ) FD-280,20,202

Chair Easy FD-229,17,20

Stool Dressing CB DB-8980,FD-282

Sofa Set 4 Seater complete FD-281,373

Sofa Set 5 Seater complete FD-281/373

Side Board FD-226

Table dining 6 Persons FD-30,239,273,139,376,CEHZ/FD-12,FD-139,289

Table dining 8 Persons FD-30,239,273,139,376,CEHZ/FD-12,FD-139,289

Table 900 X 600 X 760 mm with Drawer FD-95,293,88,41,291, 42,55, 223,224,231,291.

Table 900 X 600 X 760 mm without Drawer FD-95,293,88,41,291, 42,55, 223,224,231,291.

able 900 X 900 X 760 mm FD-95,293,88,41,291, 42,55, 223,224,231,291.

Table 600 X 600 X 760 mm FD-95,293,88,41,291, 42,55, 223,224,231,291.

Table Bed side FD-28,248,276

Table centre FD-235

Table Dressing gents FD-230

Table dressing ladies FD-230,284

Table Peg FD-230,284

Table writing Med/study DB-4119,3982,FD-84,275,33,34,249

Teapoy DB-4069,2375,FD-232

Locker Bed side wooden DB-4074,FD-54

Hat stand (small) FD-23,2096,233,361

Bed Hard with MNF Set FD/MAP/01

VISHWAS ENTERPRISES (BID ID -3502559)

Global Enterprises (BID ID -3496211)

THAKURJI ENTERPRISES (BID ID -3496515)

Mahesh Traders (BID ID -3494268)

PVR AND CO (BID ID -3493152)