Arrangement of horn gap system at LT side distribution transformer at KMP colony, crusher , PO office, konar siding, Berwabera village in respect of AKKOCP, BnK Area.

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and up to 6.5 metre

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Supplying and fitting of arcing horn and connector

Supply of copper strip of minimum size 400mm x5mm x30mm

Fitting and fixing of copper strip on the fuse set including drilling of holes , washers, nuts ,bolts ,screw ect

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required

Total impact of GST for the purpose of CTC

EASTERN ENGINEERING WORKS

MAA BHAGWATI ENTERPRISES