PROVN OF PARKING SHED AT MD ACCN AND PROVN OF STATIC WATER TANK ALONG WITH PUMP SET WITH CONNECTED PIPE LINES NEAR MT POOL AT CGDHQ CAMPBELL BAY

Amount

M&L for Surface dressing n exc 15 cm deep in soft/loose soil

Excavation over areas in any type of soil , n exc 1.5 m deep and getting out

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete as specified and as directed.

Returning, fillingin, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil all as specified and directed.

Removing excavated materils (soil) not exc. 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed.

M&L for PCC 1:2:4 Type B2 (40 mm graded aggregate)as in foundations,filling and mass concrete

M&L for Reinforced cement concrete M - 30 (using 20 mm graded aggregate, (design mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.

M&L for Reinforced cement concrete M - 30 (using 20 mm graded aggregate (design mix) in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses

M&L for Reinforced cement concrete M - 30 (using 20 mm graded aggregate, (design mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter

M&L for Formwork to soffits of flat suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for Mild steel TMT bars of 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L TMT bars 6 to 8mm mm dia and over cut to length bend to shape required including cranking, bending, and binding with mild steel wire (annealed) not less than 0.9 mm dia.

M&L Rendering 15mm thick on fair faces concrete surfaces in CM1:3 with integral water proofing compound @ 3% by weight of cement or as per manufacturers instructions, finished even and smooth without using extra cement

Supply only Integral waterproofing compound of approved make all as directed by Engr-in-charge

M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per squaremetre and blinding with clean dry sand @ 0.05 cu. m. per sq. m

M&L for Cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, copings, haunchings etc. including necessary formwork

M&L Cement concrete type C-2, 1:3:6 (40mm graded aggregate)75mm thick as in plinth protection,finished even and smooth w/o using extra cement

S&F Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' for 100mm thick concrete slab

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 50mm bore ball brass valves,high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed

Fixing only chain link fencing including line wires, any mesh, size and type to any typeof standards, rails, straining bolts, etc. including provission of binding wire

Supply only PVC coated galvanisd Chain link fencing, any size or type all as directed by Engr-in-charge

M&L for preparation of newly plastered wall surfaces and applying two coats of Acrylic weather proof exterior paint (Make: APPEX of Asian Paints / All Guard from Berger Paints or equivalent) including and over one coat of white cement as primer complete all as specified and directed.

Supplying, laying or fixing, 25 mm dia GI water tubing, medium grade, of size as shown below confirming to IS-1239 [Part-1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, etc laid in tenches / floors or fixed to walls / ceiling / roof etc including testing GI tubing with fittings / connections, in trenches / celiling /walls/roofs etc complete all as specified and as directed :- Make: Bansal / Jindal / Tata

All as per item No.28 above but 50 mm dia bore

S&F Gun metal gate valve,with iron wheel head, screwed both ends for iron pipe 25mm bore dia complete all as specified and directed. Make : Leader, Zoloto, GMT

S&F Gun metal gate valve,with iron wheel head, screwed both ends for iron pipe 50 mm bore dia complete all as specified and directed. Make : Leader, Zoloto, GMT

M&L for plain Cement concrete 1:4:8 type C-2, (using 40mm graded stone aggregate) as in foundations,filling and mass concrete etc all as specified and as directed by Engineer -in- Charge.

M&L for Hardcore of broken boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 100mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, floor etc

M&L for 100mm thick Cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in sub base, floor etc

M&L for precast Cement concrete block masonry with solid blocks 1:3:6 type C-2, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as ddircted by Engineer -in- Charge.

S&F Roof trusses (framed), trussed purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.

S&F MS gusset plates, riveting, etc. conforming to Fe 410-W (Gde E-250) quality A

S&F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa (AZ- 150) as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F MS Flats iron as in ties,Brackets etc .

M&L for Painting to steel surfaces of any description, over 10cm in width or girth, two coats of synthetic enamel paints over a coat of red oxide primer

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR) bends 110mm radius

M & L for Point wiring with 1.5 Sq mm single core copper conductor FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid FRLS PVC rigid conduit and its accessories of suitable size, heavy grade ISI marked concealed on walls /roof and MS pressed steel terminal boxes of 1.6 mm thick of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular cover plates for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm multistranded copper conductor flame retardant PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified Make of Wires : Polycab / Finolex / Havells Make of casing Capping : Prince / Pressfit / Modi (a) One light point controlled by one switch.

(b) One socket 5 Amps on independent board.

Supply & Fix Switch piano, flush type single pole, one way 5 Amp complete all as directed

Supply & Fix Switch socket combination 2 in 1, 5 Amps flush type complete all as directed

Supply & Fix Ceiling rose PVC/ Polycarbonate insulated body with three terminals complete all as directed

Supply and fix surface mounting 20 W LED Tube light fitting nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. pre wired connection up to tube light fitting with connecting up with copper 2 core flexible cord of minimum size 1.0 Sqmm and white in colour.The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) including taking down old unserviceable fittings any type including round block complete all as specified and as directed. Make : Phillips / Bajaj / Wipro

Supply & Fix Sheet metal enclosure for DB’s Single pole and neutral, double door 240V, 4 way with 100 Amps rated bus bar. Make -Legrand/L&T/Havells

Supply & Fix MCB SP 6 to 32 Amps 10 KA. "C" Series Make -Legrand/L&T/Havells

Supply & Fix MCB DP 40 Amps 10 KA. "C" Series Make -Legrand/L&T/Havells

Supply & Fixing MCB TP 16 Amps, C curve having breaking capacity 10KA complete.

Supply & Fixing MCB TPN 32 Amps, C curve having breaking capacity 10KA complete.

Supply & Fix Sheet metal enclosure for DB’s Single pole and neutral, double door 240V, 4 way with 200 Amps rated bus bar. Make -Legrand/L&T/Havells

Supply, laying, jointing, testing LT cable 1100 volts grade, XLPE insulated armoured and PVC bedded with stranded aluminium conductor heavy duty, including cable glands, cable lugs etc. to suit the cable size, laid in trenches, fixed along the poles bare or through G.I. Pipe laid under floors road etc; fixed concealed in walls encased in G.I. Pipe etc. complete of size 16 Sq mm,4 core complete all as directed. Make : Havells / Polycab / Gloster or equivalent

M&L weather proof sheet metal enclosure double door made up of MS CRCA sheet 3.15 mm thick for housing with DOL stator, single phase preventor, TPN 32 A MCB 'B' Curve 16 KA and including stand of made up of MS angle iron frame of 50 x 50 mm size on ground with PCC foundation and locking arrangements complete all as specified and directed

S&L XLPE, insulated, armoured, heavy duty, electric cable with stranded aluminium conductors, 1100 volts grade, laid in tranches/fixing on wall/poles or passing through pipe, including connecting up with suitable glands, lugs, nuts and bolts wherever required and testing on completion, including taking down existing unserviceable cable with GI protections pipes, complete all as specified and as directed by Engineer-in-Charge of cross sectional area 10 Sqmm 2 core Make : Havells / Finolex / Gloster

S & f Pumping Sets, electrical driven, Three Ph, Energy Efficient Totally Enclosed Fan Cooled (TEFC) Squirrel Cage Motors (IE2) 3 HP, 2840 rpm (Enclosure confirming to protection IP55 as per IS:4691-1968) Horizontal Foot Mounted Induction Motors, Continuously rated suitable for operation on 415+/-10%, 50 Hz+/5%, A.C. supply with class 'F' insulation for 50 Deg C ambient temperature and altitiude less than 1000M above MSL, Head Range - 24-39 mtr discharge - 455-200 (LPM) and confirming to IS 325:1996 & IS 12615:2011 Note: Rates for PCC foundation are deemed to be inclusive Make : Crompton / Kirloskar / KSB

Supply & Fixing of DOL Stator suitable for 3 HP pumpset complete all as specified & directed .Make : L&T/C&S/HPL

M&L weather proof sheet metal Enclosure for pumpset as protection against rain water complete all as specified & directed

Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth strip of 32x6mm (up to 7.5m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shwon in electrical plate no 5 of SSR part 1 including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS bar 8mm dia 150mm c/c reingorcement, watering funnel 15mm dia light grade for protection of earth electrode 20mm dia for watering all as speicified and directed and tested on completion.

S&F for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP Protection of IP-67 having outer dia 50 mm and inner dia of 38 mm with necessary couplers, bends etc for protection of LT cable all as specified and directed.

DEEPAK AGENCIES

M/s S U Enterprises

Govinda Swamy Construction