Construction of 1X50 MVA, 132/33 Grid Station, Mendhar, District Poonch, of U.T of J and K

SUPPLY of 132KV MAIN EQUIPMENTS

3 pole, SF6 gas filled, out door Circuit Breaker , including all accessories, auxiliaries and marshalling boxes/Kiosks, (145KV, 2500 Amps of 3 phase,50 c/s and 40 KA for 1 second) along with supporting structure etc. complete in all respects SS body, universal spring charging motor with mandatory sparesi.e, spring charging motor,tripping/closing coil,sf6 gas filling kit and sg6 gas for each breaker.

145kV, 50c/s, 2500Amp SCADA compatible, 40kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators without Earthing Switch. Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box

145kV, 50c/s, 2500Amp SCADA compatible, 40kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators with one Earthing Switch. Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box.

145kV, 50c/s, 2500Amp SCADA compatible, 40kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators with two Earthing Switch. Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box..

Single phase, 50c/s145KV Current Transformers, (600-300-150/1-1-1-1-1A or 1200-600-300/1-1-1-1-1A or 2000-1600-1200/1-1-1-1-1A or as per site specifications) 40 KA for one second, rated dynamic current 100KA(peak), Class A insulation, Burden 20 VA 3 NO PS Core 01 No 5P20 01 No 0.2S Class, galvanized tank including first fill of Transformer oil plus 20% extra and all accessories, auxiliaries etc.

Neutral Current Transformer with Current Rating 1A/5A and VA Burden15VA. Ratio as per site specifications. 02 No PS class cores, 01 No 0.2 S Core, Galvanized tank 31.5KA for one second, rated dynamic current 31.5KA (Peak), including first fill of Transformer oil plus 20% extra and all accessories, auxiliaries etc.

Single Phase 50c/s, outdoor metaloxide gapless type, 120KV(rms) Surge Arrestor class 3 including Surge counters/monitors, insulating base all associated accessories, auxiliaries.

132KV Control and Relay Panel for Line/Feeder Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/Schneider wit IEC 61850 compatibility, including Distance Recorder and under frequency relay (IST Line protection) distance protection directional O/C & E/F protection (backup protection), local breaber backup (LBB) protection.

132KV Control and Relay Panel for Transformer Bay Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/Schneider wit IEC 61850 compatibility, including Differential Protection, Directional O/C & E/F protection (on HV & LV side), numerical communicable REF Protection Relay, Over Fluxing protection, local breaker backup (LBB) protection separate relay for primary and back up protection.

132KV Control and Relay Panel for Bus Coupler Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/Schneider with IEC 61850 compatibility, including Bus Bar protection suitable for min 15 No bays.

Single phase, 50 c/s 132KV Capacitor Voltage Transformers (132/√3) KV/(110/√3)V, One min power freq withstand 275KVrms galvanized tank. Acc class 0.2

132KV Post Insulators Solid Core Type/Polymer type, Power Frequency Withstand Voltage 275KV rms Dry lightning impulse withstand voltage±650(KVP)

SUPPLY OF STRUCTURES

Galvanised Steel Structures (Lattice Structure)

Galvanised Fasteners, Nuts and Bolts

SUPPLY OF POWER AND CONTROL CABLES

2 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

5 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

10 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

12 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS,Galvanised steel wire/strip armoured stranded copper conductor control cable complete

19 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

2Core, 6sqmm, 1100V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

4Core, 6sqmm, 1100V, PVC insulated ,PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

3.5 Core, 25 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

Marshalling kiosk with Kiosk frames stainless steel/hot dip galvanized structural sections for pressed and shaped cold-rolled sheet steel, thickness not less than 2.0 mm. shall be provided with the degree of protection of IP:55, with Copper Bar earthing for 132 KV. I. Marshalling Box shall be outdoor type, rigidly constructed out of sheet steel or aluminium and shall be dust, water and vermin proof. Sheet steel used shall be at least 2.0 mm thick cold rolled. 2. Bay Marshilling Kiosk shall have three separate distinct compartment for the following purpose i) To receive two incoming 415V, 3 phase 63 A AC supply with auto changeover and MCB Unit and distribute minimum six outgoing 415V 3 phase 16 A, supply control by MCB with fuse failure remote indication ii) To distribute minimum 10 outgoing, 240 V, 10A supplies to be control by MCB to be drawn from 3 phase incomer. iii) 200 no. of terminal blocks in vertical formation for interlocking facilities 3. All sheet steel works shall be degreased, pickled, phosphate and then applied with two coats of Zinc chromate primer and two coats of finishing synthetic enamel paint. The colour of finishing paint shall be light admiral grey in accordance with shade no. 697 of IS:5 outside & inside shall be glossy white.

SUPPLY OF CONDUCTOR AND HARD WARE FITTINGS

500mm2 ACSR Moose (a) Aluminum = 54/3.53 mm (b)Steel= 7/3.53 mm overall diameter = 31.77 mm Approx. Wt.= 1998kg/km ultimate strength = 159.60KN

Single Tension Fittings For Single moose shall have minimum failing load of 100% ultimate strength of conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

Single Suspension Fittings For Single moose shall have minimum failing load of 50% ultimate strength of conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

Single Tension Fittings For Twin moose shall have minimum failing load of 100% ultimate strength of Bundle conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120KN.

Single Suspension Fittings For Twin moose shall have minimum failing load of 50% ultimate strength of bundle conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

Disc Insulators 120 KN, Ball & Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

Disc Insulators 90 KN, Ball& Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

T Clamps 0.5/0.4, made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

T Clamps Twin 0.4 / Twin 0.4 , made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

P I Clamps 0.2 made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

P G Clamps 0.4 made of Aluminum Alloy and shall comply in all respects withIS:5561-1970 (latest edition)

OPGW, dual window single-mode with mode field diameter 8.6-9.5 um, cladding diameter 125 um+_ 1um

Earthwire Tension Clamps comprise of compression type tension clamp with two ‘D’shackles, jumper terminals, nuts &bolts and washers etc. slip strength shall not be less than 95% of the ultimate strength of theground wire. Conductivity shall not be less than corresponding conductivity of GSS ground wire

SUPPLY OF 33KV EQUIPMENTS

33KV VCB (36 KV, 2000 Amps of 3 phase, 50 c/s and 31.5 KA for 3 sec)outdoor type with all accessories and auxiliaries along with supporting structure etc. complete in all respects SS body, universal spring charging motor with mandatory spares..i.e, spring charging motor,tripping/closing coil, and vcb bottle for each vcb

36kV, 50c/s , 2500 Amp, 31.5 kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators without Earthing Blades Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box

36kV, 50c/s , 2500 Amp, 31.5 kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators with One Earthing Blades Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box

36kV, 50c/s , 2500 Amp, 31.5 kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators with two Earthing Blades Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box

Single phase, 50c/s 36 KV Current Transformers (1200-600-300/1-1-1-1A or 2000-1600-1200/1-1-1-1A or1200-800-400/1-1-1-1A or as per site specifications) ,31.5 KA for one second, rated dynamic current 31.5 KA (peak), Class A insulation, Burden 20VA, 2 NO PS Core 01 No 5P20 01 No 0.2S Class, galvanized tank including first fill of Transformer oil plus 20% extra and all accessories, auxiliaries etc

Single Phase 50c/s, outdoor metal oxide gapless type, 30 KV (rms) Surge Arrestor class 3 including Surge counters/monitors, insulating base all associated accessories, auxiliaries.

33 KV Control and Relay Panel for Line/Feeder Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/ Schneider wit IEC 61850 compatibility, with under frequency relay E/F protection (Main protection) and O/C (Backup protection).

33 KV Control and Relay Panel for Transformer Bay Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/ Schneider wit IEC 61850 compatibility.

33 KV Control and Relay Panel for Auxillary Bay Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/ Schneider wit IEC 61850 compatibility.

33 KV Control and Relay Panel for Bus Coupler Bay with back up protection Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/ Schneider wit IEC 61850 compatibility.

33 KV Post Insulators Solid Core Type, Power Frequency Withstand Voltage 95 KV RMS Dry lightning impulse withstand voltage ± 170 (KVP)

Single phase, 50 c/s outdoor 33KV PT (33/√3) KV/ (110/√3)V with Highest System Voltage 36KV, One min power freq withstand 70KVrms, Galvanized tank. Acc Class 0.2

SUPPLY OF STRUCTURES

Galvanised Steel Structures (Lattice Structure)

Galvanised Fasteners, Nuts and Bolts

SUPPLY OF POWER AND CONTROL CABLES

2 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

5 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete.

10 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete.

2Core, 6sqmm, 1100V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete.

4Core, 6sqmm, 1100V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete.

Marshalling kiosk with Kiosk frames stainless steel/hot dip galvanized structural sections for pressed and shaped cold-rolled sheet steel, thickness not less than 2.0 mm. shall be provided with the degree of protection of IP:55, with Copper Bar earthing for 33 KV. I. Marshalling Box shall be outdoor type, rigidly constructed out of sheet steel or aluminium and shall be dust, water and vermin proof. Sheet steel used shall be at least 2.0 mm thick cold rolled. 2. Bay Marshilling Kiosk shall have three separate distinct compartment for the following purpose i) To receive two incoming 415V, 3 phase 63 A AC supply with auto changeover and MCB Unit and distribute minimum six outgoing 415V 3 phase 16 A, supply control by MCB with fuse failure remote indication ii) To distribute minimum 10 outgoing, 240 V, 10A supplies to be control by MCB to be drawn from 3 phase incomer. iii) 200 no. of terminal blocks in vertical formation for interlocking facilities 3. All sheet steel works shall be degreased, pickled, phosphate and then applied with two coats of Zinc chromate primer and two coats of finishing synthetic enamel paint. The colour of finishing paint shall be light admiral grey in accordance with shade no. 697 of IS:5 outside & inside shall be glossy white

SUPPLY OF CONDUCTOR AND HARD WARE FITTINGS

500mm2 ACSR Moose (a) Aluminum = 54/3.53 mm (b)Steel= 7/3.53 mm overall diameter = 31.77 mm Approx. Wt.= 1998kg/km ultimate strength = 159.60KN

Single Tension Fittings For Single moose shall have minimum failing load of 100% ultimate strength of conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

Single Suspension Fittings For Single moose shall have minimum failing load of 50% ultimate strength of conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

Single Tension Fittings For Twin moose shall have minimum failing load of 100% ultimate strength of Bundle conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120KN.

Single Suspension Fittings For Twin moose shall have minimum failing load of 50% ultimate strength of bundle conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

Disc Insulators 120 KN, Ball & Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

Disc Insulators 90 KN, Ball& Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

T Clamps 0.5/0.4, made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

T Clamps Twin 0.4 / Twin 0.4 , made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

Spacers for Twin ACSR Conductor

P I Clamps 0.2 made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

P G Clamps 0.4 made of Aluminum Alloy and shall comply in all respects withIS:5561-1970 (latest edition)

OPGW, dual window single-mode with mode field diameter 8.6-9.5 um, cladding diameter 125 um+_ 1um

Earthwire Tension Clamps comprise of compression type tension clamp with two ‘D’shackles, jumper terminals, nuts &bolts and washers etc. slip strength shall not be less than 95% of the ultimate strength of the ground wire. Conductivity shall not be less than corresponding conductivity of GSS ground wire

SUPPLY OF POWER TRANSFORMER

Cost of 50 MVA (ONAN/ONAF), 132/33kV Three Phase Power Transformers with OLTC, SCADA Compatible RTCC, NIFPES, HV and LV connectors and other required accessories and fittings with online DGA monitoring Kit on line dehydration kit and maintenance free automatic breathers as per detailed technical specs. With Mandatory spares as per SBD.(Current density for HV/LV winding not more than 2.4 A/sq. mm. Core flux density not more than 1.5 T.

SUPPLY OF STRUCTURES

Galvanised Steel Structures (Lattice Structure)

Galvanised Fasteners, Nuts and Bolts

SUPPLY OF POWER AND CONTROL CABLES

3.5 Core, 25 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

19 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

SUPPLY OF CONDUCTOR AND HARD WARE FITTINGS

500mm2 ACSR Moose (a) Aluminum = 54/3.53 mm (b)Steel= 7/3.53 mm overall diameter = 31.77 mm Approx. Wt.= 1998kg/km ultimate strength = 159.60KN

Single Tension Fittings For Single moose shall have minimum failing load of 100% ultimate strength of conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

Single Tension Fittings For Twin moose shall have minimum failing load of 100% ultimate strength of Bundle conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120KN.

T Clamps 0.5/0.4, made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

T Clamps Twin 0.4 / Twin 0.4 , made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

Disc Insulators 120 KN, Ball & Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

Supply of Auxillary Transformers

Cost of 33/0.433 KV, 250 KVA, 3-Phase Distribution Transformers with Bimettalic Terminal Connectors Energy Level-2 Copper wound

300 mm2 3.5 Core Cable 1.1KV Grade, Armoured, XLPE, insulated stranded conductor FRLS type

SUPPLY of COMMON MISCELLANEOUS EQUIPMENTS.

Battery Bank 110 V, 300 AH , of 55 No. cells of 2 V each, sealed maintenance free VRLA type, High impact Polyprophelene copolymer Container, flame retardant.

Battery Bank 48 V, 450AH , of 24 No. cells of 2 V each, sealed maintenance free VRLA type, High impact Polyprophelene copolymer container, flame retardant.

110V Battery charger (Three phase) :Battery charger as well as Automatic Regulators shall be of static type compatible with VRLA Batteries. Should also have necessary temperature sensors. should have both Automatic and Manual control of output voltage and current. (i) Float charging and load current ratings: 30Amp/60Amp/70Amp/ 100Amp at 220 V to 252 VD.C. Boost charging current rating: 50Amps/55Amp/60Amp/70Amp/ 80Amp / 100 Amp at 198 V to 296/302 VD.C.

48V, DCPS SMPS Based DC Power supply system of 35 Amp rating

DC Distribution Board frames shall be fabricated using mild steel structural section or pressed and shaped Cold rolled sheet steel of thickness not less than 2.0 mm and shall be provided with a degree of protection of IP-52 as per IS:2147, bus bar chamber having a degree of protection of IP-42 as per IS:2147. Finishing paint on panels shall be of shade 692 (smoke grey) of IS:5. The inside shall be properly stoved The paint thickness shall be at least 50microns.Bus bars and jumper connections shall be of high conductivity aluminum alloy or copper of adequate size.

DC Distribution Panel (110V, DC) with 1No. 10Amp. Air break ckt .Double pole for battery incoming supply with DP MCBs & indicating Lamps etc.

DC Distribution Panel (48V, DC) with 1No. 10Amp. Air break ckt. Double pole for battery incoming supply with DP MCBs & indicating Lamps etc.

AC Distribution Panel (415 V, AC) complete with ckt .Breakers, indicating Lamps etc for 132/33KV Grid Station.

250 KVA Oil cooled servo stabilizer 3-phase 4 wire copper wound indoor type, input voltage range220-460V, output 400V ± 1% having, Digital control, Response time < 10ms ,Automatic Switch-Off against:· Under/Over-Voltage· Over-Load & Short–Circuit ·Single Phasing, Class C Type Secondary surge Protection

Power cables for AC/DC network in Control room for 132/33 KV Grid Station including control desk.

Const. power with avg. 5KM 33 kV line (S/C 0.2 ACSR with 11 mtr ST Pole),, transformer and electricity charges.

RTU panel for SCADA for 132/33 KV Grid Stationas per CEA guidelines and latest IS amended upto date

Circuit Breaker Operation Analyzer as per CEA guidelines and latest IS amended upto date

Winding Resistance Measurementas per CEA guidelines and latest IS amended upto date

Micro Ohm Meteras per CEA guidelines and latest IS amended upto date

Air Conditioning /Central Heating for 132/33 KV Grid Station as per specifications and as per CEA guidelines and latest IS amended upto date

High Mast Yard Lighting 200 W LED Lamps make Havells, Bajaj) With 12 Fittings & Feeder Pillars Having Timers For Automatic On-Off including aviation light. Including monopole,laying of foundation cabling etc as pr site specification/requirement.

125 KVA DG Set, 3 phase, silent type, Rated Engine Power at 100% load KW: 114.8 rated current capacity @ 0.8 PF, 173.9 Amps including construction of foundation, canopy, local chemical earthing pit, cabling etc, as per site specificarion/requirement and as per CEA guidelines and latest IS amended upto date

SUPPLY OF ADDITIONAL EQUIPMENTS

Internal Communication-Telephone/WiFi Net work CCTV base survelliance system with HD cameras, network routers, LAN (CAT-6 cable), NVR with high capacity (2 TB or more) HDD, LCD/LED HD TV, and other works as necessary.

Rotating CCTV N/W IPIR Night Vision speed dome camera 360 along with cables and all necessary accessories as mentioned in the technical specifications with40-43 inches LED T.V with VMS.

Tan Delta & capacitance measurement kit. The test set shall be fully automatic, microprocessor based and designed for condition assessment of electrical insulation in high voltage apparatuses such as Transformers, Reactors, bushings, CTs, CVTs, Circuit Breakers, rotating machines etc with output up to 12 V at frequency 45Hz, output test current @ 12 KV: 100 mA continuous and 300 Ma intermittent or better. Along with test lead and accessories and transport case with wheels.as per latest IS amended upto date

Digital BDV oil test kit (100 KV).as per CEA guidelines and latest IS amended upto date

High Vacuum oil Filtration Plant 6000 LPH as per CEA guidelines and latest IS amended upto date

20 MT Diesel Hydraulic Rough Terrain Mobile Crane/Man lifter as per latest IS amended upto date

Fire Fighting System.Fire detection and alarm for control room building as per CEA guidelines and latest IS amended upto date

Event Logger, Disturbance Recorder & GPS System time synchronizing unit with PC

Erection,testing and commissioning of 132KV Main Equipments

3 pole, SF6 gas filled, out door Circuit Breaker , including all accessories, auxiliaries and marshalling boxes/Kiosks, (145KV, 2500 Amps of 3 phase,50 c/s and 40 KA for 1 second) along with supporting structure etc. complete in all respects SS body, universal spring charging motor with mandatory sparesi.e, spring charging motor,tripping/closing coil,sf6 gas filling kit and sg6 gas for each breaker.

145kV, 50c/s, 2500Amp SCADA compatible, 40kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators without Earthing Switch. Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box

145kV, 50c/s, 2500Amp SCADA compatible, 40kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators with one Earthing Switch. Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box.

145kV, 50c/s, 2500Amp SCADA compatible, 40kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators with two Earthing Switch. Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box..

Single phase, 50c/s145KV Current Transformers, (600-300-150/1-1-1-1-1A or 1200-600-300/1-1-1-1-1A or 2000-1600-1200/1-1-1-1-1A or as per site specifications) 40 KA for one second, rated dynamic current 100KA(peak), Class A insulation, Burden 20 VA 3 NO PS Core 01 No 5P20 01 No 0.2S Class, galvanized tank including first fill of Transformer oil plus 20% extra and all accessories, auxiliaries etc.

Neutral Current Transformer with Current Rating 1A/5A and VA Burden15VA. Ratio as per site specifications. 02 No PS class cores, 01 No 0.2 S Core, Galvanized tank 31.5KA for one second, rated dynamic current 31.5KA (Peak), including first fill of Transformer oil plus 20% extra and all accessories, auxiliaries etc.

Single Phase 50c/s, outdoor metaloxide gapless type, 120KV(rms) Surge Arrestor class 3 including Surge counters/monitors, insulating base all associated accessories, auxiliaries.

132KV Control and Relay Panel for Line/Feeder Duplex wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/Schneider wit IEC 61850 compatibility, including Distance Recorder and under frequency relay (IST Line protection) distance protection directional O/C & E/F protection (backup protection), local breaber backup (LBB) protection.

132KV Control and Relay Panel for Transformer Bay Duplex wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/Schneider wit IEC 61850 compatibility, including Differential Protection, Directional O/C & E/F protection (on HV & LV side), numerical communicable REF Protection Relay, Over Fluxing protection, local breaker backup (LBB) protection separate relay for primary and back up protection.

132KV Control and Relay Panel for Bus Coupler Duplex wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/Schneider with IEC 61850 compatibility, including Bus Bar protection suitable for min 15 No bays.

Single phase, 50 c/s 132KV Capacitor Voltage Transformers (132/√3) KV/(110/√3)V, One min power freq withstand 275KVrms galvanized tank. Acc class 0.2

132KV Post Insulators Solid Core Type/Polymer type, Power Frequency Withstand Voltage 275KV rms Dry lightning impulse withstand voltage±650(KVP)

Erection,testing and commissioning of 132KV Structures

Galvanised Steel Structures (Lattice Structure)

Galvanised Fasteners, Nuts and Bolts

Erection,testing and commissioning of 132KV Power and Control Cables

2 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

5 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

10 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

12 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS,Galvanised steel wire/strip armoured stranded copper conductor control cable complete

19 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

2Core, 6sqmm, 1100V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

4Core, 6sqmm, 1100V, PVC insulated ,PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

3.5 Core, 25 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

Marshalling kiosk with Kiosk frames stainless steel/hot dip galvanized structural sections for pressed and shaped cold-rolled sheet steel, thickness not less than 2.0 mm. shall be provided with the degree of protection of IP:55, with Copper Bar earthing for 132 KV. I. Marshalling Box shall be outdoor type, rigidly constructed out of sheet steel or aluminium and shall be dust, water and vermin proof. Sheet steel used shall be at least 2.0 mm thick cold rolled. 2. Bay Marshilling Kiosk shall have three separate distinct compartment for the following purpose i) To receive two incoming 415V, 3 phase 63 A AC supply with auto changeover and MCB Unit and distribute minimum six outgoing 415V 3 phase 16 A, supply control by MCB with fuse failure remote indication ii) To distribute minimum 10 outgoing, 240 V, 10A supplies to be control by MCB to be drawn from 3 phase incomer. iii) 200 no. of terminal blocks in vertical formation for interlocking facilities 3. All sheet steel works shall be degreased, pickled, phosphate and then applied with two coats of Zinc chromate primer and two coats of finishing synthetic enamel paint. The colour of finishing paint shall be light admiral grey in accordance with shade no. 697 of IS:5 outside & inside shall be glossy white.

Erection,testing and commissioning of 132KV Conductor and Hardware Fittings

500mm2 ACSR Moose (a) Aluminum = 54/3.53 mm (b)Steel= 7/3.53 mm overall diameter = 31.77 mm Approx. Wt.= 1998kg/km ultimate strength = 159.60KN

Single Tension Fittings For Single moose shall have minimum failing load of 100% ultimate strength of conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

Single Suspension Fittings For Single moose shall have minimum failing load of 50% ultimate strength of conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

Single Tension Fittings For Twin moose shall have minimum failing load of 100% ultimate strength of Bundle conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120KN.

Single Suspension Fittings For Twin moose shall have minimum failing load of 50% ultimate strength of bundle conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

Disc Insulators 120 KN, Ball & Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

Disc Insulators 90 KN, Ball& Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

T Clamps 0.5/0.4, made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

T Clamps Twin 0.4 / Twin 0.4 , made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

P I Clamps 0.2 made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

P G Clamps 0.4 made of Aluminum Alloy and shall comply in all respects withIS:5561-1970 (latest edition)

OPGW, dual window single-mode with mode field diameter 8.6-9.5 um, cladding diameter 125 um+_ 1um

Earthwire Tension Clamps comprise of compression type tension clamp with two ‘D’shackles, jumper terminals, nuts &bolts and washers etc. slip strength shall not be less than 95% of the ultimate strength of theground wire. Conductivity shall not be less than corresponding conductivity of GSS ground wire

Erection,testing and commissioning of 33KV Equipments

33KV VCB (36 KV, 2000 Amps of 3 phase, 50 c/s and 31.5 KA for 3 sec)outdoor type with all accessories and auxiliaries along with supporting structure etc. complete in all respects SS body, universal spring charging motor with mandatory spares..i.e, spring charging motor,tripping/closing coil, and vcb bottle for each vcb

36kV, 50c/s , 2500 Amp, 31.5 kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators without Earthing Blades Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box

36kV, 50c/s , 2500 Amp, 31.5 kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators with One Earthing Blades Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box

36kV, 50c/s , 2500 Amp, 31.5 kA for one second, Ac motor operated horizontal double break, outdoor type 3pole Isolators with two Earthing Blades Copper fixed and moving contact/ Copper current carrying parts, galvanized iron mechanism box

Single phase, 50c/s 36 KV Current Transformers (1200-600-300/1-1-1-1A or 2000-1600-1200/1-1-1-1A or1200-800-400/1-1-1-1A or as per site specifications) ,31.5 KA for one second, rated dynamic current 31.5 KA (peak), Class A insulation, Burden 20VA, 2 NO PS Core 01 No 5P20 01 No 0.2S Class, galvanized tank including first fill of Transformer oil plus 20% extra and all accessories, auxiliaries etc

Single Phase 50c/s, outdoor metal oxide gapless type, 30 KV (rms) Surge Arrestor class 3 including Surge counters/monitors, insulating base all associated accessories, auxiliaries.

33 KV Control and Relay Panel for Line/Feeder Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/ Schneider wit IEC 61850 compatibility, with under frequency relay E/F protection (Main protection) and O/C (Backup protection).

33 KV Control and Relay Panel for Transformer Bay Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/ Schneider wit IEC 61850 compatibility.

33 KV Control and Relay Panel for Auxillary Bay Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/ Schneider wit IEC 61850 compatibility.

33 KV Control and Relay Panel for Bus Coupler Bay with back up protection Duplex completely wired including Substation automation supporting IEDs/numerical relays of make ABB/Siemens/GE Micom/ Alstom/ Schneider wit IEC 61850 compatibility.

33 KV Post Insulators Solid Core Type, Power Frequency Withstand Voltage 95 KV RMS Dry lightning impulse withstand voltage ± 170 (KVP)

Single phase, 50 c/s outdoor 33KV PT (33/√3) KV/ (110/√3)V with Highest System Voltage 36KV, One min power freq withstand 70KVrms, Galvanized tank. Acc Class 0.2

Erection,testing and commissioning of 33KV Structures

Galvanised Steel Structures (Lattice Structure)

Galvanised Fasteners, Nuts and Bolts

Erection,testing and commissioning of Power and Control Cables

2 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

5 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete.

10 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete.

2Core, 6sqmm, 1100V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete.

4Core, 6sqmm, 1100V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete.

Marshalling kiosk with Kiosk frames stainless steel/hot dip galvanized structural sections for pressed and shaped cold-rolled sheet steel, thickness not less than 2.0 mm. shall be provided with the degree of protection of IP:55, with Copper Bar earthing for 33 KV. I. Marshalling Box shall be outdoor type, rigidly constructed out of sheet steel or aluminium and shall be dust, water and vermin proof. Sheet steel used shall be at least 2.0 mm thick cold rolled. 2. Bay Marshilling Kiosk shall have three separate distinct compartment for the following purpose i) To receive two incoming 415V, 3 phase 63 A AC supply with auto changeover and MCB Unit and distribute minimum six outgoing 415V 3 phase 16 A, supply control by MCB with fuse failure remote indication ii) To distribute minimum 10 outgoing, 240 V, 10A supplies to be control by MCB to be drawn from 3 phase incomer. iii) 200 no. of terminal blocks in vertical formation for interlocking facilities 3. All sheet steel works shall be degreased, pickled, phosphate and then applied with two coats of Zinc chromate primer and two coats of finishing synthetic enamel paint. The colour of finishing paint shall be light admiral grey in accordance with shade no. 697 of IS:5 outside & inside shall be glossy white

Erection,testing and commissioning of Conductor and Hardware Fittings

500mm2 ACSR Moose (a) Aluminum = 54/3.53 mm (b)Steel= 7/3.53 mm overall diameter = 31.77 mm Approx. Wt.= 1998kg/km ultimate strength = 159.60KN

Single Tension Fittings For Single moose shall have minimum failing load of 100% ultimate strength of conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

Single Suspension Fittings For Single moose shall have minimum failing load of 50% ultimate strength of conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

Single Tension Fittings For Twin moose shall have minimum failing load of 100% ultimate strength of Bundle conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120KN.

Single Suspension Fittings For Twin moose shall have minimum failing load of 50% ultimate strength of bundle conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

Disc Insulators 120 KN, Ball & Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

Disc Insulators 90 KN, Ball& Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

T Clamps 0.5/0.4, made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

T Clamps Twin 0.4 / Twin 0.4 , made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

Spacers for Twin ACSR Conductor

P I Clamps 0.2 made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

P G Clamps 0.4 made of Aluminum Alloy and shall comply in all respects withIS:5561-1970 (latest edition)

OPGW, dual window single-mode with mode field diameter 8.6-9.5 um, cladding diameter 125 um+_ 1um

Earthwire Tension Clamps comprise of compression type tension clamp with two ‘D’shackles, jumper terminals, nuts &bolts and washers etc. slip strength shall not be less than 95% of the ultimate strength of the ground wire. Conductivity shall not be less than corresponding conductivity of GSS ground wire

Erection ,testing and commissioning of Power Transformer

Cost of 50 MVA (ONAN/ONAF), 132/33kV Three Phase Power Transformers with OLTC, SCADA Compatible RTCC, NIFPES, HV and LV connectors and other required accessories and fittings with online DGA monitoring Kit on line dehydration kit and maintenance free automatic breathers as per detailed technical specs. With Mandatory spares as per SBD.(Current density for HV/LV winding not more than 2.4 A/sq. mm. Core flux density not more than 1.5 T.

Erection,testing and commissioning of Structures

Galvanised Steel Structures (Lattice Structure)

Galvanised Fasteners, Nuts and Bolts

Erection,testing and commissioning of Power and Control Cables

3.5 Core, 25 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

19 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

Erection,testing and commissioning of Conductor and Hardware Fittings

500mm2 ACSR Moose (a) Aluminum = 54/3.53 mm (b)Steel= 7/3.53 mm overall diameter = 31.77 mm Approx. Wt.= 1998kg/km ultimate strength = 159.60KN

Single Tension Fittings For Single moose shall have minimum failing load of 100% ultimate strength of conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

Single Tension Fittings For Twin moose shall have minimum failing load of 100% ultimate strength of Bundle conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120KN.

T Clamps 0.5/0.4, made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

T Clamps Twin 0.4 / Twin 0.4 , made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

Disc Insulators 120 KN, Ball & Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

Erection,testing and commissioning of auxialliary transformer

Cost of 33/0.433 KV, 250 KVA, 3-Phase Distribution Transformers with Bimettalic Terminal Connectors Energy Level-2 Copper wound

300 mm2 3.5 Core Cable 1.1KV Grade, Armoured, XLPE, insulated stranded conductor FRLS type

Erection ,testing and commissioning of Common Miscellaneous Equipments

Battery Bank 110 V, 300 AH , of 55 No. cells of 2 V each, sealed maintenance free VRLA type, High impact Polyprophelene copolymer Container, flame retardant.

Battery Bank 48 V, 450AH , of 24 No. cells of 2 V each, sealed maintenance free VRLA type, High impact Polyprophelene copolymer container, flame retardant.

110V Battery charger (Three phase) :Battery charger as well as Automatic Regulators shall be of static type compatible with VRLA Batteries. Should also have necessary temperature sensors. should have both Automatic and Manual control of output voltage and current. (i) Float charging and load current ratings: 30Amp/60Amp/70Amp/ 100Amp at 220 V to 252 VD.C. Boost charging current rating: 50Amps/55Amp/60Amp/70Amp/ 80Amp / 100 Amp at 198 V to 296/302 VD.C.

48V, DCPS SMPS Based DC Power supply system of 35 Amp rating

DC Distribution Board frames shall be fabricated using mild steel structural section or pressed and shaped Cold rolled sheet steel of thickness not less than 2.0 mm and shall be provided with a degree of protection of IP-52 as per IS:2147, bus bar chamber having a degree of protection of IP-42 as per IS:2147. Finishing paint on panels shall be of shade 692 (smoke grey) of IS:5. The inside shall be properly stoved The paint thickness shall be at least 50microns.Bus bars and jumper connections shall be of high conductivity aluminum alloy or copper of adequate size.

DC Distribution Panel (110V, DC) with 1No. 10Amp. Air break ckt .Double pole for battery incoming supply with DP MCBs & indicating Lamps etc.

DC Distribution Panel (48V, DC) with 1No. 10Amp. Air break ckt. Double pole for battery incoming supply with DP MCBs & indicating Lamps etc.

AC Distribution Panel (415 V, AC) complete with ckt .Breakers, indicating Lamps etc for 132/33KV Grid Station.

250 KVA Oil cooled servo stabilizer 3-phase 4 wire copper wound indoor type, input voltage range220-460V, output 400V ± 1% having, Digital control, Response time < 10ms ,Automatic Switch-Off against:· Under/Over-Voltage· Over-Load & Short–Circuit ·Single Phasing, Class C Type Secondary surge Protection

Power cables for AC/DC network in Control room for 132/33 KV Grid Station including control desk.

Const. power with avg. 5KM 33 kV line (S/C 0.2 ACSR with 11 mtr ST Pole),, transformer and electricity charges.

RTU panel for SCADA for 132/33 KV Grid Station

Circuit Breaker Operation Analyzer

Winding Resistance Measurement

Micro Ohm Meter

Air Conditioning /Central Heating for 132/33 KV Grid Station

High Mast Yard Lighting 200 W LED Lamps 9make Havells, Bajaj) With 12 Fittings & Feeder Pillars Having Timers For Automatic On-Off including aviation light. Including laying of foundation cabling etc as pr site specification/requirement.

125 KVA DG Set, 3 phase, silent type, Rated Engine Power at 100% load KW: 114.8 rated current capacity @ 0.8 PF, 173.9 Amps including construction of foundation, canopy, local chemical earthing pit, cabling etc, as per site specificarion/requirement.

Erection,testing and commissioning of additional equipments

Internal Communication-Telephone/WiFi Net work CCTV base survelliance system with HD cameras, network routers, LAN (CAT-6 cable), NVR with high capacity (2 TB or more) HDD, LCD/LED HD TV, and other works as necessary.

Rotating CCTV N/W IPIR Night Vision speed dome camera 360 along with cables and all necessary accessories as mentioned in the technical specifications with40-43 inches LED T.V with VMS.

Tan Delta & capacitance measurement kit. The test set shall be fully automatic, microprocessor based and designed for condition assessment of electrical insulation in high voltage apparatuses such as Transformers, Reactors, bushings, CTs, CVTs, Circuit Breakers, rotating machines etc with output up to 12 V at frequency 45Hz, output test current @ 12 KV: 100 mA continuous and 300 Ma intermittent or better. Along with test lead and accessories and transport case with wheels.

Digital BDV oil test kit (100 KV).

High Vacuum oil Filtration Plant 6000 LPH

20 MT Diesel Hydraulic Rough Terrain Mobile Crane/Man lifter

Event Logger, Disturbance Recorder & GPS System time synchronizing unit with PC

Fire Fighting System.Fire detection and alarm for control room building

CIVIL WORKS

Main Duct of Size 1200mm x1200mm with 6 mm M.S Chequered Trench Covers of size 500 x 1300 mm

Main Duct of Size 1200mm x 1200mm with concrete grade M15 of size 500 x1300 mm

Sub Main Duct of Size 600mm x 600mm with concrete grade M15 of size 700x500 mm

Tee off duct:150mmsandfilledHDPEpipesfromSubmaintoEquipments in the outdoor area

Earth Mat (40mm dia steel bars) as per approved design, Galavanised Iron (75mm x 12mm/ 50mm x 6 mm) risers for Equipment and Structural Earthing

Concreting of yard & Laying Of Gravel

Oil sump Tank ( Stainless steel) as per approved Drawing

Construction of transformer foundation including rail track and allied works as per approved drawings

Cable trays/Racks of size 400mm X3000 mm made of MS Angle 40x40x6 mm,40x6 flat

Cable trays/Racks of size 400mm X3000 mm made of MS Angle 40x40x6 mm,40x6 flat

Construction of 132KV Yard Foundations as per approved drawings

Laying of 132KV Column foundations (as per Drawing)

Laying of 132KV Isolator foundations (as per Drawing)

Laying of 132KV SF6 Breaker foundations (as per Drawing)

Laying of 132KV CT foundations (as per Drawing)

Laying of 132KV CVT/PT foundations (as per Drawing)

Laying of 132 KV L.A foundations (as per Drawing)

Laying of 132KV Post Insulator foundations (as per Drawing)

Construction of 33KV Yard Foundations as per approved drawings

Laying of 33KV Column foundations (as per Drawing)

Laying of 33KV Isolator foundations (as per Drawing)

Laying of 33KV VCB foundations (as per Drawing)

Laying of 33KV CVT/PT foundations (as per Drawing)

Laying of 33KV CT foundations (as per Drawing)

Laying of 33KV L,A foundations (as per Drawing)

Laying of 33KV Post Insulator foundations (as per Drawing)

Construction of Cable Ducts With Covers

Main Duct of Size 900mm x 600mm with 6 mm M.S Chequered Trench Covers of size 500 x 1000 mm

Main Duct of Size 900mm x 600mm with concrete grade M15 of size 500 x1000 mm

Sub Main Duct of Size 600mm x 450mm with concrete grade M15 of size 700x500 mm

TeeoffDuct:150mmsandfilledHDPEpipesfromSubmaintoEquipments in the outdoor area

Earth Mat (40mm dia steel bars) as per approved design, Galavanised Iron (75mm x 12mm/ 50mm x 6 mm) risers for Equipment and Structural Earthing

Concreting of yard & Laying Of Gravel

Foundation plateform for AUX transform( as pr approved drawing)

Construction of rail track for dragging of power transformer

Construction of Retaining walls RRM

Construction of compund walls with brick work complete job inclunding plastering ,painting MS angle and concertina wire etc( as per approved drwaing)

providing and fixing G.I. chain link mesh fencing

Development of Land Benching /Levelling

Construction of control room building as per approved drawings complete in all respects tile flooring sanitary fittings,wiring etc including trussed roof as per the directions of Engineer in Charge

Construction of AEE/AE Quarters building as per approved drawings complete in all respects tile flooring sanitary fittings,wiring etc including trussed roof as per the directions of Engineer in Charge

Construction of JE Quarters building as per approved drawings complete in all respects tile flooring sanitary fittings,wiring etc including trussed roof as per the directions of Engineer in Charge

Construction of SBA Quarters building as per approved drawings complete in all respects tile flooring sanitary fittings,wiring etc including trussed roof as per the directions of Engineer in Charge

Construction of Guest House building Duplex as per approved drawings complete in all respects tile flooring sanitary fittings,wiring etc including trussed roof as per the directions of Engineer in Charge

Construction of Store shed as per approved drawings

Construction of DG room as per approved drawings

Construction of internal roads ( complete macemadised )

Provision of water supply to control room, residential buildings, yard including Borewell, storage tanks etc.as per site requirement

Construction of scurity post as per approved drawings

Establishment of workshop facility for 132/33 KV Gris station

Providing of cabin and control desk for grid station

Construction of outdoor gantry for 33 KV feeders

Ornamental wporks and development of lawns and land scapping

Provision of furniture ,Beds, sofa, Chairs , Tables,AC s, Bedding items , Crockery items , refrigrator,water purifier, LED TVs for all buildings as per the directions of Engineer in Charge

Supply and Laying of LT Distribution And Street lightening as per site requirement

Supply, Erection ,testing and commissioning of Sub Station Automation System

Complete Sub Station Automation System including Hardware and Software for the Sub Station and Remote Control Station along with associated equipments as per technical specifications

Supply, Erection ,testing and commissioning of PLCC / SCADA

Digital Protection Coupler in PLCC

220KV/132KV/33KV BCU in SCADA

BCU Panel

Please Enable Macros to View BoQ information