Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.4 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹39.7 L+₹71,250 (1.83%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹39.9 L+₹89,953.90 (2.31%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹40.1 L+₹1.1 L (2.87%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹52,000
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
PROVN OF LIVING ACCN FOR TPS WITH ALLIED INFRA AT DOU UNDER STN HQ ZANGLI
2023_MES_592859_1
GE 874/EWS-11/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹52,000
Yes
21 Jul 2023
2 May 2023
5 Jun 2023
2 May 2023
3 Jun 2023
16 May 2023
2 May 2023 - 9 May 2023
Amount
BR and EM Portion
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil.
Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft/loose soil.
M&L PCC 1:4:8 (40mm graded Aggr) type D2 in foundations filling and mass Concrete.
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter with rough finish flat surface.
M&L RCC M-25 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete
M&L Formwork to sides of pillars, posts, struts, piers,columns, and stanchions, etc finish with rough finish flat surface.
M&L RCC M-25 (Design mix) as in Columns, pillars, piers, posts and struts.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.
Damp proof course to horizontal or vertical surfaces in PCC 1:2:4 type B-0 40mm thick including necessary formwork all as specified and directed
Supply only Integral water proofing compound for damp proof course all as specified and directed.
M&L Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in CM 1:6
Mild steel works as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde?E- 250) quality?all as specified and directed
Preparation of newly surfaces of steel over 10cm width or girth and applying two coats of synthetic enamel paint overa coat of red oxide primer all as specified and directed.
Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L Rendering 15mm thick plaster on external face of wall in CM 1:4 finished even and smooth without using extra cement.
M&L two coat of cement base paint over a coat of primer including preparation of newly plaster surface
M&L Rendering 10mm thick plaster on internal face of wall in CM 1:6 finished even and smooth without using extra cement.
M&L two coat of oil bond distemper over one coat of putty including preparation of newly plaster surface
S&F 4mm thick plywood (03 Nos of ply),grade BWR type BB fixed with nails to timber frame work as in ceiling, complete all as specified.
S&F Plain fillets of exc. 3 & n exc. 6 Sqcm, square ,rectangular or triangular in section , clean swan, secured nails.
M&L Two coat of synthetic enamel paint over one coat of pink primer on new plywood surfaces of any description, not otherwise described over 10cm width or girth .
M&L Sand filling under floors or in foundation including watering and consolidation
Hardcore of broken stone boulders of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface.
Material and labour for 75mm thick PCC 1:4:8 type D2 as in sub base of floor all as specified and directed.
Material and labour for PCC 1:2:4 type B1 40mm thick in floor all as specified and directed.
Supply and fix Virified Ceramic tiles dark shade approved quality10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 thick screed mortar in CM 1:6 all as specified and directed
M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.06sqm but nexc 0.11 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 over 25 mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg , complete all as spd & directed.
M&L for coloured glazed ceramic tiles of size 300x200x6 to 7mm this as on vertical surfaces such as skirting /dados over 15 mm rendering in CM 1:4.
Material and labour for RCC Design Mix M-25 as in Slabs supported on walls, beams and columns in floor, roofs, landings, balconies, canopies,, deck slans and in shelves and the like all as specified and directed.
M&L75 mm thick PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate ) as in plinth protection, surfaces finished even and fai without using extra cement complete all as specified and directed.
Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound and filling with sealing compound grade A
S&F anodised aluminium powder coated door shutters with aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, ruber neoprene packing. handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc. complete all as specified.
S&F anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminhun snap beading, screws etc. complete all as specified
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
Door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane.
Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples
S&F But hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100mm.
M&L Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm.
M&L Aluminium handles, cast type, anodised 150mm
S&F Floor door stoper Aluminium 140 mm long.
M&L Mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or secur;ing with clips quality conforming to FE-410-s or FE 410-0
All as per item above but 6 to 8 mm dia bars as in stirrups/ spacers.
Removing excavated material n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.
M&L 80mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size over sand cushion 25mm thick filling under floors/ path including watering and consolidation confirming to IS 15658-2006, M-40 Grade complete all as specified and directed.
Material and labour for walling of random rubble stone masonry, uncoursed masonry built in CM 1:4 all as specified and directed.
PCC (1:2:4) type B-1 (using 20mm graded stone aggregate), in coping and the like including weathering, slightly rounded/ chamfered angles with and including necessary use and waste of form work for fair finished surfaces of concrete, complete all as specified and directed.
Supply and Fix 110mm bore PVC (SWR) Pipes single cocketed in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.
Material and labour for stone aggregate loose filling with aggregate of gauge 80 to 150mm by the side of retaining wall all as specified and directed.
Material and labour for raised pointing to rubble, uncoursed or brought up to coursed stone masonry in CM 1:4 all as specified and directed.
Point wiring with 1.5 Sq mm multi standerd insulated copper conductor single core PVC insulated cable 1100 volt including casing and caping for one light point controlled by one switches including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover incl PVC insulated 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch completed all as specified and directed.
All as per item above but for 3-pin socket out let 5 Amps on the same board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.
All as per item above but for 3-pin socket out let 5 Amps on independent board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.
All as per item above but for 3-pin socket out let 15 Amps on independent board with 2.5 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous continous1.5 Sqmm earth wire.
Supply and fixing in replacement of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for LED bulb 7 watt. Make : Havells/Anchor/Siska/Philips/Bajaj.
Supply and fixing in replacement of LED 7 Watt Bulb with B22 pin, of make Havells/ Syska/ Philips, suitable for fixing in holder as above.
S&F in replacement of decorative LED batten for surface and pendant applications. Anodized extruded aluminium housing, high transmisitivity diffuser, high lumen output of VIVA MINI LED Luminaires (4FT) of 20W connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make-Havells product code LUMILINEPLUSBS20WLED865SPCSS or equivalent of approved make as approved by Engr-in-Charge.
Supply and fixing LED light fitting, 1x9 W bulk head luminaries, with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. Make : Bajaj/Havells/Anchor/Philips.
S&F Switch piano 6 Amps single pole one way. Make : Havells/Anchor/Philips.
S&F ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked). Make : Havells/Anchor/Philips.
S&F Switch socket combination 2-in-1 5 pin 6 Amps (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips.
S&F Switch socket combination 5 in 1, 5 and 15 Amp universal controlled by by one switch (ISI Marked). Make : Havells/Anchor/Philips.
S&F in replacement of sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/LEGRAND/SSK.
S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutal (SPN) 32-63 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips
S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips
Supply and fix Ceiling fan with blades, down rods, electronic regulator and accessories 230 volts, 1200 mm sweep, min air delivery 210 CFM with service value 6.00, BEE five star rated with brushless direct current motor with 5 year warranty Copper winding Make : Havells/ Bajaj/USHA.
S&F house service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos900 bends. M.S. hook and stay or guy complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza
S&F in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq mm 4 core complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza
Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal all as specified.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, cable flat or circular of size 16sqmm, two core including taking down old services cable and removing from the site complete all as specified and as directed. Make : Havells, Plaza, Gloster, Polycab.
Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed by Engineer-in-charge. Note:-Punned thickness only shall be measured and paid.
Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed by Engineer-in-charge.
Supplying and fixing, 40mm dia light grade, Galvanised mild steel tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed for cable protacion. (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule).
Supplying and fixing, 50mm dia light grade, Galvanised mild steel tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed for cable protacion. (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule).
Supply and Fixing 5 kVA (4000 W and above) Mainline Stabiliser, with input voltage range of 90 to 300 V, Output stabilised at 220V, with inbuilt safety MCBs, including connection to main lines (input and output, complete, all as specified, directed and clarified by Engineer in charge of make of Aulten/ V Guard or equivalent as approved by Engineer in Charge.
Supply and installation and testing of Hot, Cold and normal Water Dispenser with refrigrator including all accessories 20 litre capacity, 230 volts, 50 hz, with LED display, Refrigerant type R134a, complete all as specified and as directed. Make : Blue Star, Usha or equivalentmake as approved by GE.
Excavation in trenches not exc1.5m wide and depth exc 1.50 but n.exc 3.0m deep complete all as specified and directed.
Supply, erecting and fixing the true vertical position, steel tubular swaged pole(410 SP-31), 09 mtr long, complete with cast iron base plate, pole cap/final taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire lenght of pole, including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed). Note:- (a) Cost of numbering of pole shall be deemed to included in unit rate. (b) Excavation, Earth work and PCC foundation will be measured and paid for separately.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation of PCC poles/struts as specified including necessary form work, complete all as specified & directed.
M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation of stay assembly etc including necessary form work, complete all as specified & directed.
M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles, including necessary form work finishing even and smooth without using extra cement, complete all as specified & directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.
Demoloition of Concrete cement concrete unreinforcement in ground floors and pavings n exc 15 cm thickness (below or above ground level) as specified
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slabe including rubbing and polishing complete over 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) over 15 mm thick Screed bed in CM 1:6 or bedding layer of Mortar for laying floor finishes as specified
M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as above as specified over 10mm thick rendering in Cement Mortar 1:4 complete all as specified & directed.
Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar pattern roof covering .
Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet.
M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling
M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in walining.
Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work .
M & L second class soft wood in scantling clean swan complete all as specified
All as per item above but except timber.
Dismantling of boarding of any description fitten in any position with nails
S&F 20mm thick 2nd class softwood boarding , planed one side , with butt joints and fixed with nails in facia eaves boarding complete all as specified and direced by Engr-in-Charge.
M&L 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps.
Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm(w/o taking off shutters from chowkhat)
Taking down chowkat with shutters n. exc.1.5Sqm (w/o taking off shutters from chowkhat)
S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified.
S & F plain framed, panelled shutters 35mm thick 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides,or of veneered particle board med density, wood particle board with commercial face or 9mm BWP plywood fitted to chowkat.
S & F glazed & skeleten shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) fitted to chowkhats.
S & F in Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F Mild Steel 100 mm long butt hinges extruded aluminium anodised
S&F Mild Steel 75 mm size mild steel butt hinges medium weight
S&F 100 mm long aluminium anodised barrel tower bolt of exturded section
S&F aluminium anodised alloy handles fabricated type 150mm size of handle.
S&F 100 mm long aluminium handles cast type anodised.
S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section
M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe all as specified.
M&L for Concrete bed to drain pipes for 150 mm including forming cradles; in as specified
M&L for Reinforced concrete pipes,150mm class NP2, laid and jointed complete with collars as specified
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down MCB DBs complete with MCB's/ isolator etc removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and as directed.
M/S AB AHAD RATHER
M/S SS SHAH WALI & CO
MS SHEIKH NADEEM AKBAR
Bidder Name
M/S AB AHAD RATHER
M/S SS SHAH WALI & CO
MS SHEIKH NADEEM AKBAR
M/S MUNEER AHMAD WANI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .