Karnataka

Active

Works

Bridges/Culverts

Magadi taluk, magadi kunigal road upparthi, shripathihalli, doddasomanahalli, janigere, benappanapalya, via NH 75 road ch 7.00 km and 16.00 km construction of new bridge work ( Sangeevaiahnapalya and benappanapalya premises)

Public Works Department

PWD Division Office Ramanagara | Ramanagara, Karnataka

Amount: ₹4.0 CrCloses: 30 Jul 20264d left

Timeline

Published22 Jul 2026
Pre-Bid Meeting24 Jul 2026
Closes30 Jul 2026
Bid Opening31 Jul 2026

Tender Value

₹4.0 Cr

EMD Value

₹6.0 L

Closing Date

30 Jul 2026, 9:30 pm4d left

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Shankar K H

Office Number

08027273787

Work Description

Construction of box culvert and approach road

Tender Information

Tender ID

PWD/2026-27/BR/WORK_INDENT36362/CALL-2

Reference Number

PWD/2026-27/BR/WORK_INDENT36362/CALL-2

Tender Type

Open

Product Category

Bridges/Culverts

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Ramanagara

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredIncome Tax Balance sheets and Annual Turnover Certificate with CA Certified UDIN Number Compulsory 2021-22 to 2025-26

RequiredPWD Registration Certificate

RequiredWork Done certificate

RequiredLine of Credit

RequiredBid Capacity

RequiredAs per KW-4 Bid Document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-4 K.P.W.D. and further orders there on.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor has to produce the purchase bills.

As per Karnataka state Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

Conditional tenders are not accepted.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates, which shall be produced at the time of opening of technical Bids for physical verification.

Financial year will be reckoned as the period between first day of April and thirty first day of March inclusive

The employer reserves the rights to reject one or all tender without assigning any reason.

Tenderer shall note, that the tenderers those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation

The employer is not responsible for any delay in accessing E- procurement portal.

All the items includes all Leads and Lifts, Loading and Unloading, transportation charges, Cost of all materials, Labour, HOM of machineries as per Standard specifications and as directed by the Engineer-in-charge of the work and all other incidental items which are necessary for the successful completion of the work

Contractors should be registered with KPWD Class II Registration

The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval

The Cost of the tender form shall not be refundable

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

Tenderers must provide insurance to all the employees executing this work.

The Laboures deployed shall mandatorily wear the face mask, hand gloves and take all safety measures to protect laboures and staff

Co- Ordinating/ solving the right of way problems is responsibility of LEC, in co-ordination with PWD/ local authorities BESCOM.

Tree Cut/ trimming of trees, in Co- Ordination with forest Dept. etc., is the responsibility of bidder / LEC in the way of shifting lines etc.

Co-Ordinating line clear works with BESCOM is the responsibility of bidder in consultation with local BESCOM officers.

Bidder should plan for all the extra materials if required incidental to the shifting works and stick to the time schedule for shifting of works. Delay of works attract huge penalties as recommended by AEE in charge of works.

The rates and amount put to tender are Exclusive of GST. GST will be paid separately over the quoted amount

Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

Contractor should establish a fully functional laboratory at site at no extra cost in order to carry out all the required tests for the materials being used in the project

Contractor should carryout additional test required to test the suitability of materials including borrow area before using the same either as sub-grade or base course materials.

Contractor should execute the project with least impact to the environment

Contractor should adhere to HSE policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

For the vehicles/machineries/ equipments for which RTO registration is statutory,for such vehicles/machineries / equipments the contractor should upload the Registration Certificate documents issued by RTO. For Machineries and other equipments for which RTO registration is not applicable, for such machineries and equipments, purchase invoice document should be uploaded. If there is sale deed for such machineries and equipments, original invoice along with registered sale deed should be uploaded.

The defect liability period for this project shall be 2 Years

LOC / K-form for the stipulated amount should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection.

Further particulars, if any, required by the contractor can be had from the O/o the Executive Engineer, Ramanagara Division, Bengaluru south Dist during office hours.

Bidder shall pay Contract Management Module processing fees as per KPPP norms.

All Government orders & circulars prevailing and issued from time to time related to tenders shall be applicable.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties.

Contractor should take all precautions to ensure that no damage is caused to the existing structures during project execution. If any damage is caused, it has to be rectified/restored to its original condition at his own risk and cost.

The necessary certificates/ documents in support fulfilling qualification criteria stipulated separately shall be scanned and attached to KPPP. The original EMD Bank Guarantee shall be submitted after last date of receipt of tender and before opening of technical bid. Any other documents shall be produced during evaluation of Technical Bid if necessary for verification.

The evaluation of the technical bid will be done based on the information provided by the contractor as per uploaded documents, duly verified if necessary. If the employer finds that any certificates/ information furnished is false, such bidders will be disqualified, barred from participation in the bid and his EMD will be forfeited.

If necessary the Contractor must obtain approvals/clearances by co-ordinating with Related department

The quantities for the necessary deviation road and cofferdam are provided on a one-time basis in the BOQ and any additional quantities required for completion of the work shall be deemed included in the Contractors rates no extra payment shall be admissible, and such works shall be executed at the Contractors own cost and risk.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Banker Details for reference

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

List of Financial Resources with Certificates

Past Experience

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) (b) Mandating satisfactory completion(atleast 90% of the contract value) as a prime contractor for at least one similar such as Bridge work to an extent of 50% of the cost of the work of value not less than Rs.199.00 Lakhs

Work Done Certificate

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) (c)Executed in any one year,the following minimum quantities of work (usually 80% of the peak annual rate of construction) 1)Earth work Excavation/ Embankment / Earthen shoulder /Subgrade -7002.00 Cum 2) RCC/PCC-963.50 Cum 3) TMT Steel- 61.37 tonne 4)GSB/WMM-3109.00 Cum 5)DBM/ BC/BM/SDBC-469.20 Cum

Work Done Certificate

Capabilities of Vendor

Tenderers who meet the above specified minimum qualifying creteria will only be qualified if their available tender capacity is more than the total tender value.The available tender capacity will be calculated as under assessed available tender capacity is qual to AxNx1.5-B,where A is equal to maximum value of civil engineering works executed in any one year during the last five years(updated to 2026-27 price value) taking into account the completed as well as works in progress.N is equal to number of years prescribed for completion of the works for which tenders are invited.(i.e, 9 months) B is equal to 2026-27 price level, of existing commitments and on going works to be completed during the next i.e,9 months) The statements showing the value of existing commitments and ongoing works as well as stipulated period of completion remaining for each of the works listed should be counter signed by the employer incharge not below the rank of an executive engineer or equalent.

Others -- Bid Capacity

Each Tenderer should further demonstrate a)Availability by owning atleast 50% of the required/specified key and critical equipment for this work and b)The remaining 50% can be deployed on lease /hire basis for all works provided ,the relevant documents( commitments ,agreements etc ) for availability for this work are furnished. However it is obligatory for the contractor to use the fallowing machineries for various activities involved in construction as per MORTH specifications.1)Hot Mix Plant/Batch Mix Plant( minimum capacity 40/60 TPH)-1 Own,2)Soil Compactor -1 Own, 1-Hire/Lease 3) Dewatering Pump-1 Own, 1- Hire/Lease 4) Machanical Paver finisher-1 Own 5) Tippers/HGV-2 Own, 2- Hire/Lease 6) Concrete mixer with weigh batch facility-1 Own, 1- Hire/Lease 7) Excavator 0.90 cum Bucket capacity-1 Own, 1- Hire/Lease 8) Needle/screed / plate vibrators-1 Own, 1- Hire/Lease 9) Water tanker-2 Own, 2- Hire/Lease 10) Steel centering & shuttering -400 Sqm Own, 400 Sqm Hire/Lease

Others -- PURCHASE INVOICES, BILLS, SALE, DEED, HIRE/LEASE AGGREEMENT & RC ISSUED BY RTO etc

Financial Status

Income Tax Balance sheets and Annual turnover certificate issued by the CA with membership NO with UDIN in the last five years (i.e. 2021-22 to 2025-26) (a) Achieved in at least two financial years a Minimum financial turn over (in all classes of civil engineering construction works only) of Rs.796.00 lakhs

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs.133.00 Lakhs (Credit lines/ letter of credit/ certificates from nationalized/scheduled banks for meeting the fund requirement etc)

Line of Credit

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

List of works for which tenders already submitted

Others -- List of existing commitments and ongoing works

Others

Contractors should be registered with KPWD Class II Registration

PWD Registration Certificate (Class I/II/III/IV)

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.0 L

Important Dates

Last Activity

22 Jul 2026

Published

22 Jul 2026

Bid Opening

31 Jul 2026

Download Ends

28 Jul 2026

Pre-Bid Meeting

24 Jul 2026

BOQ Preview

•

Magadi taluk, magadi kunigal road upparthi, shripathihalli, doddasomanahalli, janigere, benappanapalya, via NH 75 road ch 7.00 km and 16.00 km construction of new bridge work ( Sangeevaiahnapalya and benappanapalya premises)

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 ---- Including c...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 ---- Including cost and conveyance of all materials, all labour, all l...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Painting on concrete surface - Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and apply...

•

Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.2...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Survey of C.D. works including taking L-section of Road, catchment area plan by Traverse method and taking trial pits of size 1.00x1.00x1.50 m including preparation of detailed Plans an...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kppp 36362 kw 4 bid BRIDGE.doc

Tender Document • 1.20 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].