Replacement of Damaged 11 kv XLPE Cable and Installation of T/F and construction of line for load bifurcation under EUDD-I/II FIROZABAD

Amount

Carriage of following material from Centre Stores, Asfabad to site of work through the Kacha and Pakka road including the work of its loading and unloading at the respective ends in the area of EUDD-I/II, Firozabad including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-20 Kms.)

250 KVA Transformer

9 /11 mtr. Long ST Poles.

Cable Al. 3x70 Sqmm. XLPE 11 KV

LT AB Cable (3x120+1x70+1x16) sqmm

LT AB Cable (3X95+1x70+1x16) sqmm

LT PVC Cable 3.5x400 sqmm

11 KV X-Arms,l conductor, G.I wire,Disc Insulators, Pin insulators, clamps, DT box, 11KV TPMO, 4 Core LT MCB with box, LT Incoming Panel and other required line material as per Sanctioned Package.

Installation of the 250 KVA transformer at Tapa Penth for load bifurcation, under the jurisdiction of Electricity Urban Distribution Division [II] Firozabad, in proper alignment and direction, and making all HT/LT connections properly, as per direction of supervising engineer, including the work of loading and unloading at the respective ends and also including the cost of arrangement of laborer, T&P, carrier etc required for proper completion of work.

Construction of plinth of size 5’x6’x5’ at Tapa Penth under the jurisdiction of EUDD-II, Firozabad. The size of plinth shall be of 4’ above the ground level. At the bottom there shall be brick ballast pad of size 5x6’x3” thick in ratio 1:3:6 [Cement, sand and brick ballast]. The first class brick wall work shall be 9” thick in ratio 1:4 [Cement and sand]. The hollow portion among the wall shall be filled up with the brick ballast properly hammered and rammered as per direction of supervising engineer. On the top of the wall there shall be mesh of 12 mm thick iron rod at distance of 9’’ and RCC work in ratio 1:3:6 [Cement, Sand and grit stone] There shall be plastering all over the plinth 12 mm thick in ratio 1:4 [Cement and sand] above the ground level. Proper watering and curing of the plinth shall be carried out as per direction of supervising engineer and also including the cost of arrangement of labourer, T&P etc required for proper completion of work.

Erection of the following including duly grouted in cement, sand and brick ballast in ratio 1:2:4, including work of fitting of all accessories, stone pad and clamps suitable for AB cable. Work will be carried out as per RESPO manual and as per direction of supervising engineer including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

9 /11 mtr. Long ST Poles.

Installation of all other accessories Incl. Earthing of pole, Clamps for LT, MS Top channel & Fuse set, Stay set, 11 KV TPMO, Distribution box & all other required line material for succesful completion of work

laying of Various Size cables as per RESPO manual and as per direction of supervising engineer including the cost of arrangement of labour and T&P etc. required for proper completion of the work.

Cable Al. 3x70 Sqmm. XLPE 11 KV

LT AB Cable (3x120+1x70+1x16) sqmm

LT PVC Cable 3.5x400 sqmm

LT AB Cable (3X95+1x70+1x16) sqmm

Carriage of dismantle material i.e. poles and other accessories of 11 KV and LT line as mentioned above from site to JE store (10 Kms.)

ABG ENGINEERS

Bhola electrical enterprises