Spl repair of bldg No. P-11/01 (Single Offrs Accn) at Old Cantt Prayagraj.

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid) external surface, complete all as specified and directed.

Supply only Integral crystalline water proofing compound of approved make, complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on Brick/ Conc surface finished even and fair on internal surfaces of wall, complete all as specified and directed.

M&L for complete removal of existing treatment on exterior and interior surface of wall and ceiling/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour, complete all as specified and directed.

M&L for prepration of new / Old plastered surface of wall and applying two coats of water based premium acrylic smooth exterior emulsion of approved coulur with silicon addictive & color stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algal propertiess in two coats @ 1.79 ltrs (undiluted)/10sq mtrs diluted with water as per manufacturer instruction, complete all as specified and directed. Name of Manufacturer : ASIAN/ BERGER/ NEROLAC or equivalent make as mentioned in Appx 'D' Note- The contractor shall obtain approval of the agency from GE and shall enter a memorandum of understanding (MOU) with the manufacturer duly approved by GE. The execution of work shall be commenced after the submission of MOU and necessary approval from the Engineer-in-charge. MOU shall be valid during currency of work. However during defectlibality period, if any defect is noticed, the contractor shall only be responsible for the rectification of same.

Material and labour for 1mm thick wall care putty with one coat of acrylic water based exterior grade primer @0.9 ltrs (undiluted)/10sq mtrs diluted with water 1:1 ratio on exterior & interior wall. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. Name of Manufacturer : ASIAN/ BERGER/ NEROLAC or equivalent make as mentioned in Appx 'D'

Material and labour for 1mm thick Plaster of Paris Putty over plastered surface even and smooth complete all as specified and directed.

M&L for preparation of new or old plastered surface and applying two coats of Premium Plastic Emulsion paint on walls and ceiling, complete all as specified and directed.