REPAIR/MAINT OF JOINERIES, FLOORING, PLUMBING, ETC AT ZONE-III AT BASISTHA UNDER GE GUWAHATI

Amount

Taking down chowkats or frame n exc 1.5 sqm each including shutter ( without taking off shutters from the frames), complete all as directed.

Taking down chowkats or frame exc 1.5 sqm but n exc 4 sqm each including shutter ( without taking off shutters from the frames), complete all as directed.

Taking down shutters of any description n exc 1 sqm each , complete all as directed.

Taking down shutters of exc 1 and n.exc 2 Sqm each, complete all as directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and refixing in the same opening, complete all as directed.

S & F 2nd class hard wood plain solid, straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S & F plain framed panelled shutters (any number of panels) 35mm thick with panels of timber flat on both sides or of veneered particle board medium density fitted to chowkats, complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commerical type on both sides complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed.

S& F 30 mm thick 2nd class hard wood glazed and skeleton shutters, divided into squres open rebated and prepared to receive glass, gauze, etc, (with sash bars),edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters of windows , ventilators, etc are provided with stiles and rails as specified in SSR Part -I. section 8, clause 8.24(b), complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube as per per specification, complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails, complete all as directed.

S&F 2nd class HW boarding with butt joints fixed with nails 20mm thick planed both sides, complete all as specified and directed.

S&F colour coated aluminium anodised door/windows/ventilators/ partitions etc with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills etc after taking down existing shutter etc complete (The design/pattern, profile size & other dimensions shall be all as directed by Engr-in-Charge at site) including aluminium handles, tower bolts, grills etc complete all as specified and directed. Note :- Floor door spring sheet galss, wire cloth, lock etc shall be measured and paid separately, complete all as specified and directed.

S& F 4 mm thick sheet glass ordinary quality and glazing with beads fixed with metal panel pins or spring clips in squares not exc 0.50 sqm in each pane, complete all as specified and directed.

-Ditto- but 5.5mm thick exceeding 0.50 Sqm, complete all as specified and directed.

S&F prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination duly fixed with frame work, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stable, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint (1st quality) over a priming coat of pink primer, complete all as specified and directed.

M&L for applying two coats of creosote oil after preapration of new or old wooden surfaces of any description and girth not otherwise described, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with beads fixed with metal panel pins or spring clips in squares not exc 0.50 sqm in each pane complete, all as specified and as directed.

S&F 200 mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 125 mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

M&L 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast, cast section and fixing bolts and sliding bolts of cost aluminium alloy, complete all as specified and directed.

S&F 150 mm aluminum handle cast type anodized, complete all as specified and directed.

S&F 100 mm aluminum handle cast type anodized, complete all as specified and directed.

Supply only butt hinges, medium weight cold rolled, mild steel of size 100 mm complete, all as specified and as directed.

Supply only butt hinges medium weight cold rolled, mild steel of size 75 mm complete, all as specified and as directed.

Supply only butt hinges 100mm size extruded aluminium alloy with galvanised MS hinge pin, anodized and fixed type B-21, complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S&F, in repair, Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and scantaling, complete all as directed.

M&L false ceiling with 10 mm thick 600mm x900mm plaster of Paris sheets fixed with machine screws on and including GI channel 18 gauge thick grid work, main joists placed at 750 mm centre to centre , cross joists placed at 450mm centre to centre, hanging with 6mm dia GI wire suspenders from roof, ‘J’ hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with Gypsum anhydrous binder and prepare the surface till smooth surface is achieved; and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets all complete as required as per manufacturer’s instructions and as directed .

S&F in repair non asbestos fibre cement building boards 4mm thick fixed with existing ceiling frame work with screws including application of two coats of distempering over a coat of primer complete all as specified.

Dismantling Asbestos cement (corrugate ted, semi corrugated, etc.) sheets in roof coverings including ridge or similar pattern roof coverings complete all as directed.

"S&F asbestos cement corrugated or semi corrugated sheet 6mm thick in roofs etc fixed with “L” or ‘J” type or cranked hook bolts ,complete all as specified and as directed

Dismantling MS work of any description, complete all as directed.

S&F framed work such as grills, guard bars, ladders, rallings frame work of water tanks etc conforming to Fe 290 grade E-165, complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes, complete all as specified and directed.

Dismantling Corrugated steel Sheets any gauge, thickness, Nainital or Similar Pattern Roof Coverings , complete all as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition of brick work built in cement mortar, complete all as directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar 1:6, complete all as specified and directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster from brick or stone walls, etc including raking out joints, haking for key, scrubbing down with water etc, complete all as directed.

M&L Rendering 15 mm thick in two layers (10mm + 5mm) externally in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound @200ml/50kg of cement on top layer of 5mm thick as per manufacturer’s instructions and finishing the surfaces fair and even without using extra cement, complete all as specified and directed. (Note : WPC measured and paid separately as ‘Supply only’)

Supply only liquid water proofing compound, complete all as specified and directed.

M&L rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of distemper oil-emulsion over a coat of chalk whiting after applicatio of wall care putty, complete all as specified and directed.

M & L for applying two coats of cement based paint after preparation of newly plastered wall surfaces, complete all as specified and directed.

Preparation of old decorated plastered/unplastered surfaces of walls by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of cement base paint complete all as specified and directed.

Preparation of old decorated plastered/unplastered surfaces of ceiling by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of cement base paint complete all as specified and directed.

Preparation of old surfaces of walls by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of oil bound distemper complete all as specified and directed.

Preparation of old surfaces of ceiling by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of oil bound distemper complete all as specified and directed.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection/paving including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

Dismantling floor hearth wall tiling including cement mortar bedding (but not backing removing serviceable tiles to store and rubbish at the premises, complete all as directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as directed.

M &L for vitrified ceramic coloured, light shade tiles area of each tiles (Square/rectangular) n.exc 0.36 sqm 10mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, all as specified and as directed.

M &L for Non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete, all as specified and as directed.

M&L Glazed ceramic coloured tiles of size. 450x350x7mm thick on vertical surfaces of walls such as skirting dado etc and rendering 10mm thick screed bed in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in floor, steps, jambs, soffits, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15m thick screed bed or bedding layer complete all as specified and directed.

S & F in repairs 100 mm size grating doom PTMT, complete all as specified and directed.

Cutting chases in brick walls for concealed water tubing and making wood in cement mortar 1:3, cutting n.exc 10cm girth, complete all as specified and directed.

S & F 15 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and laid in floors including taking down complete all as specified and directed.

S & F 20 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floors including taking down complete all as specified and directed.

S & F 25 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floors including taking down complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including wall fittings, bends, shoes etc including cleaning or refixing, complete all as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls as in rain water/soil waste etc, complete all as specified and directed.

S & F 500 litrs capacity three layers rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SS part I including dismantling and removal from site, complete all as specified and directed.

S & F 1000 litrs capacity three layers rotational moulded polythylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SS part I including dismantaling and removal from site, complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes after disconnecting existing tanks, setting a side for repairs cleaning etc on hoisting if required, reconnecting and refixing in position including painting duly embosing the date of cleaning on tank wall using cut stencil and white paint for 500 ltr capacity water tanks, complete all as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes after disconnecting existing tanks, setting a side for repairs cleaning etc on hoisting if required, reconnecting and refixing in position including painting duly embosing the date of cleaning on tank wall using cut stencil and white paint for 1000 ltr capacity water tanks, complete all as directed.

S & F in repairs vitreous China squatting pan, Orissa pattern size 580 x 440mm white with integral foot rest and connection, complete all as specified and directed.

S & F in repairs vitreous China wash down water closet pan (pedestal pattern) white(excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed.

S & F in repairs vitreous China wash basin, white, flat back, single 550 x 400mm excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets, waste coupling, short connection pipe, complete all as specified and directed.

S & F in repairs plastic water closet seat, coloured , closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

S & F in repair, 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVE connection pipe 15mm bore with PTMT nuts of length 450mm, complete all as per directed by Engr-in-charge.

S&F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s), complete all as specified and directed.

S&F in repairs, 600mm long, 20mm dia tubular towel rail, brass, chromium plated with bracket complete as specified and as directed.

S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S & F in repairs 15mm bore Bib taps chromium plated, cast opper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15mm dia stop valves, cast copper alloy, chromium plated fancy type screwed down, high pressure, with cruthch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S & F in repairs 15mm bore bib tap standered of PTMT any colour screwed, for iron pipe and fixed (minimum wt -15mm-90 gms), complete all as specified and directed. Make-Prayag

S & F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'Cold' with long screwed shanks and flynuts screwed for iron pipe and fixed, complete all as specified and directed.

S & F in repairs PVC connection 15 mm bore 450mm long directed with PTMT nuts, complete all as specified and directed.

S & F in repair floor mounted coupled WC with couple closet bowl with UF seat cover, hinges, accessories set of size 360x650x800mm complete with cistern and fittings all as specified and as sdirected.Make JAQUAR cat no OPS-WHT-15751 UF and ZPS-WHT-15201 or equivalent as approved by GE from list of approved makes.

S&F in repair 15 mm Push Cock Make-Prayag CAT No-PR-139 or equivalent as approved by GE from list of approved makes.

S&F in repair 15 mm Angle Cock with Flange Make-Prayag CAT No-MACASA-7610 or equivalent as approved by GE from list of approved makes.

S&F in repair 15 mm self closer piller tap Make-Prayag CAT No-BSC-02 or equivalent as approved by GE from list of approved makes.

S&F in repair PVC Urinal waste pipe (38/40x800mm) Make-Prayag CAT No-3281 or equivalent as approved by GE from list of approved makes.

Supplied and fixed M.S work as in bands, straps, support or stays for rain water pipes including bolts, if required hooks(stay), heavy, for large gates,hooks & pintle hinges large hasps and staples, chains,hand made sliding bolts,clamps & hold fasts, wall ties,hooks for hanging fans and similar small articles conforming to Fe- 410-O or Fe 310-O all as specified and directed.

Supplied and fixed in repairs sinks made of stainless steel 1 mm thick with drainage board kitchen or laboratory with plugs , washers and wastes including bedding in cement mortar on to dwart wall or including fixing cantilever , brackets and connecting union to pipe . Overall size 915x460mm bowl size 410mm x 330 mm x 160 mm all as specified and directed.

M&L preparation of old or new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Cleaning of old existing marble surfaces of any description and applying white cement slurry in joints of marble incl necessary cutting and polishing complete all as directed by Engr-in-Charge

Cleaning of old existing terrazzo surfaces of any description and applying white cement slurry on terrazzo toping as required incl necessary grinding and polishing complete all as directed by Engr-in-Charge

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as directed.

M&L for PCC (1: 3:6) type C-2 as in surfaces channels and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel exc 20cm and not exc 40cm inner girth in cement concrete using extra cement including forms, moulds etc, complete all as specified and directed.

M&L for PCC (1:2:4) type B-0, 40mm thick as in padding/slope correction layer finished even and fair after roughening and cleaning of existing surface and brushing neat cement slurry @ 3.0Kg per Sqm, complete all as specified and directed.

M&L Cutting out to V- section in existing roofs or terracing , cleaning out ,wetting, grouting with cement mortar (1:3), complete all as specified and directed

S&F in repair 18/19mm block board, grade 2nd quality, interior grade decorative type with decorative face veneer on one face fixed with screw to timber frame work complete all as specified.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in copings; benching etc including necessary form work if required, complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm screed bed in CM 1:6, complete all as specified and directed.

M&L 100 mm thick cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in paving, complete all as specified and directed.

PRITHWI BUILDERS

DEEP CONSTRUCTION

M/S K Nath and co

M/S SEWAK SINGH