Rejuvenation, Conservation and Plantation with Fencing of Emlitar Pond in ward no.06 (2nd Call)

Clearing Grass and Removal of Rubish Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area by manual means

for Dewatering pump 10H.P water area x depth/8.3m3/hour (basic rate + 10% C.P + 5% O.H.C)

E/W in excavation and filling in canal by the hydraulic excavator as per designed section in ordinary soil ( vide classification of soil item-A) and making the banks with excavated earth in proper profile and clod breaking and laying earth in 225 mm layers beyond 500 m and upto 1000 m and all lifts by tipper including construction and maintenance of haul road all complete as per specification and direction of E/I.

Extra for earth work in marshy, slushy and daldal soil (vide classification of soil item-F) all complete as per specification and direction of E/I. 30% if item no. 3

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the fouda removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge)..

XLPE indulated pvc sheathed ,heavy duty ,armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts.(conforms to is:7098,part-1) 2c x 10 sq mm

XLPE indulated pvc sheathed ,heavy duty ,armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts.(conforms to is:7098,part-1) 2c x 6 sq mm