REPAIR MAINT OF GARBAGE BINS SEPTIC TANKS SOAK WELLS SECURITY WALL CHAIN LINK FENCING PCC COPING ROOF FLOORING APPROACH PATH HARDSTANDING AND OTHER MISC BR WORKS

Amount

Dismantling posts or struts (wood, steel, or RCC) any section, any length n exc 5m including taking out embedded portion in concrete, brick work, masonry etc and all as specified and directed. and incl neccessary excavation for new post holes all as specified and directed.

M&L for Cement concrete 1:3:6 type C2 (using 40 mm graded stone agg) as in foundation filling and for mass concrete incl demolition of Concrete (un reinforced) of any description and in any position not otherwise specifically provided all as specified and directed

S & F MS angle iron Hand rails, fencing posts, flat iron including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only of chain link fencing MS galvanised sqaure wire mesh of size 50mm X 50mm, dia of wire 4mm including line wires, to any type of standard rails, straining bolts, etc all as specified and directed.

Fixing only in repairs chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc inlcuding provision of binding wire etc all as specified and directed.

S&F in repairs MS round bars 10 mm dia and over Fe 290 (Gde - E-165)cut to length hooking ends and all as specified and directed.

S &F in repairs Mild steel screw bolts (machine made) dia of neck 16 to 20mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long all as specified and directed.

M & L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) setting in CM 1:6 work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces and Demolition of reinforced cement concrete of any description and in any position and completed all as specified and directed.

M & L mild steel TMT bar 10mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed.

Running welding in repairs exc 6 mm but n exc 9mm, complete all as specified and directed.

M & L for 100 mm thick PCC 1:2:4 type B-2 (using 20 mm graded crushed stone agg) as in PCC in Hard standing etc. with , spike rolling ,or making impression of expanded metal, while the concrete is green incl demolition of Concrete (un reinforced) of any description and in any position not otherwise specifically provided complete all as specified and

M&L for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade over sand cushion with grey cement and no pigment incl removal of old and necessary demolition and all as specified and directed.

M&L for broken stone boulders hard core of guage n.exc 63mm deposited spread and level laid in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Dismantling structural steel work incl doors, gates but excluding framed trusses etc all as specified and directed.

S&F framed work as in doors or gates of angle,tubes or other section with gusset plates, rails, braces,guard bar etc., complete, to be prepared for hanging or sliding with and including hinges or steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

S&F MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 all as specified and directed.

S&F Welded steel wire fabric cut to length, bent to shape required and tying with and including annealed mild steel not less than 0.9mmdia or fixing with with galvanised steel staples supplied and fixed complete to wood or steel members not exceeding 4kg/sqm complete all as specified and directed.

M & L Providing two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces and all as specified and directed.

M&L for 300x300x25mm thick prepolished cement concrete chequered tiles jointed in neat cement slurry and pointed in white or coloured cement to match the floor over 20mm thick screed bed in CM 1:4 including neccessary demolition and removal outside MoD land all as specified and directed.

S & F in repair concertina coil of 610mm dia (in stretched position) hot deep galvanised steel wire coated with CLR ante corrosive coating making diamond shape with the help of devotail clips (18 SWG) fixed over barbed with the angle iron the concertina coil is to be fixed with barbed wire at points where coil touched the bottom barbed wire with the help of hog rings (14 SWG) complete,incl dismantling of old unserviceable concertina coil etc complete all as specified and directed.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base of floor finished even and rough to receive top layer including demolition of Concrete (un reinforced) of any description and in any position not otherwise specifically provided all as specified and directed.

S&F in repair galvanised two strand steel barbed wire 2.24 mm dia barbed wire with 2 mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire staples or steel pins etc as directed (each line wire to be measured) all as specified and directed.

Restraining and resecuring barbed wire including making good staples etc (each line wire to be measured) all as specified and directed.

M & L for PCC 1: 3 : 6 type C-2 ( Using 40 mm graded crushed stone aggregates ) Cement concrete in surface channels and drainsincluding demolition of cement Concrete (un reinforced) of any description and in any position not otherwise specifically provided all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick, laid over 15mm thick cement screed bed in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including necessary demolition and removal of rubbish outsite MoD land etc complete all as specified and directed.

M&L for welding not exceeding 10 Cm length & thickness of metal to be welded not exceeding 6mm comlete all as spcified and directed.

M&L for Preparation of old decorated wall surfaces including cleaning with water rubbing of fungus complete removal, applying two coat of weather proof paint "APEX" exterior wall paint incl neccessary preparation to give uniform and smooth finish all as specified.

M&L for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-40 Grade over sand cusion with grey cement and no pigment and included side kerb concrete, incl removal and necessary demolition all as specified and directed. Note:- Sand cushion shall be measured and paid seperately under relavent item supply only.

ditto All as per item No.27 here in above but except Interlocking tiles. Note:- Sand cushion shall be measured and paid seperately under relavent item as supply only.

Supply only Sand for filling under floors or in foundations including watering and consolidation and all as specified and directed.

M&L for kerb stone precast with PCC (1:2:4) type B1 using 20mm graded aggregate finished even and fair without using extra cement incl demolition of old kerb stone (un reinforced) of any description and in any position not otherwise specifically provided all as specified and directed.

Renewing cement concrete tiles/interlocking tiles in patches, area n exc 5 sq.m. Including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as directed. Note : The rate includes for cutting out broken tiles, removing and cleaning loose tiles, preparing bed removing rubbish, raming and replacing old with new tiles to match, complete with all cuttings etc, required. New tiles required is deemed to be included in quoted rate all as directed. The unit rate is also including necessary beding in cement mortor/Sand filling.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed in Cement Mortar (1:6) 15 mm thick, colour of granite as approved incl removal of old all as specified and directed. NOTE : (i) Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any discription of thickness in floor (i) The unit rate is deemed to be included for rounding to edges facing sides of stone slabs.

M & L for 75 mm thick PCC type C1, 1:3:6 (20 mm graded aggregate used) in plinth protection finishing the surface even and smooth with using extr cement, incl necessary demolition of PCC all as speecified and as directed.

M&L for Forming Construction joints 30 mm deep x 10 mm wide filled with sealing compound all as specified and directed.

M&L for Providing 35mm thick precast cement concrete type B0 1:2:4 louvres and jallies, (measured solid) set in CM 1:4, , faces are finished smooth including demolition of old damaged jallies etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on external surfaces finished even and smooth without using extra cement and Taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc.,and removal of rubbish off the premises and leaving the work clear of any plastering etc complete all as specified and directed.

M&L for three coats of whitewash on new surfaes of walls incl neccessary preparation to give uniform and smooth finish etc complete all as specified and directed.

Cleaning Open rain water drain of average cross sectional area not exe between 1.70 Sqm by removing the filled earth debris, vegitation etc and removing rubbish off the premises etc complete all as specified and directed.

Material and labour for Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat of cement based paint complete all as specified and as directed.

Material and labour for Preparation of old decorated plastered or unplastered surface of wall, ceiling etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading, oil, greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new or old untreated surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of floor guard paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint using mechanical means over 10 cm width or girth, not other wise described complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint etc complete all as specified and directed.

M & L for walling of random rubble, uncoursed, Bangalore type masonry well bonded bedded solidly hearted built in CM 1:6,including demolition of brick work / stone masonry/PCC block built in cement mortar of any description etc complete all as specified and directed.

ditto all as per item No.46 here in above but except stone

M & L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified, bangalore type etc complete all as specified and directed.

M & L for key pointing to random or polygonal rubble, uncoarsed or brought upto courses in CM 1:4 etc complete all as specified and directed.

M & L keyed pointed in CM 1:4 for squared rubble masonry including Racking out joints / points in cement mortar to squared rubber masonry coursed or uncoursed etc complete all as specified and directed.

M & L broken glass coping on top of walls in cement mortar 1:3 incl taking down old glass and removing the rubbish to a distance not less than 100 m and deposited where directed Note : The unit quoted rate deemed to be included for following :- (a) 25mm thick layer of cement mortar broken glass (of bottle or thick glass) approximately 63mm gauge, shall be firmly embedded at the rate of 10 Kg of glass per square metre of rendered surface, jogged edges of the glass being left projecting. (b) Taking down existing glass from coping. (c) Scaffolding for execution of work and protective measures should be taken.

M&L for pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 including demolition of brick work / stone masonry/PCC block built in cement mortar of any description as specified and directed.

M&L for Providing cement concrete in PCC 1:2:4 type B1 (20mm aggregate) and Demolition of cement Concrete (un reinforced) of any description and in any position not otherwise specifically provided of any description as specified and directed.

M & L rendering 15 mm thick cm 1:4 on brick surfaces finished even and smooth with out using extra cement of any description as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats cement base paint on walls over a coat of alkali resistant primer of any description as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws & including dismantling of any type of sheets in roof coverings complete all as specified & directed

M&L for second class hard-wood in scandlings, clean sawn including taking down existing complete all as specified and as directed

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws & including dismantling of any type of sheets in roof coverings complete all as specified & directed

Supply and fixing Anodized alunimun snap grid frame work of size 605 x 605 mm for false ceiling as per manufacturer instructions, with Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and 6mm thick Non asbestos fibre cement building boards, fixed to sheet suitably placed in false ceiling grid made of Aluminium/G.I./ M.S.as per pecification and drawing and including dismantling old unservicable wall and celing board & including frame with of any type and description, complete all as specified and directed.

M&L Non skid Ceramic tiles 7-8 mm thick, area of each tiles exc 0.09 sqm not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15 mm thick in Cement Mortar 1:6 screed bed or bedding layer , including dismantling existing tile and removing rubbish off the premises complete all as specified and as directed.

M&L Ceramic wall tiles 7-8 mm thick designed , of size 300 x 450 mm in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering 10 mm thick in Cement Mortar 1:4 including taking down existing tile and removing rubbish off the premises complete all as specified and as directed.

M&L for Preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weater proof paint complete all as specified and as directed. Note:-(i) Cost of scaffolding required deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account.

M&L Preparation of old concrete/Asbestos/GI Sheet/Cement/Plaster surfaces over brooming down or steel wire brushing down and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L Virified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15 mm thick in Cement Mortar 1:6 screed bed complete including dismantling of existing tile and disposal of to outside MD land all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dedo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over,10 mm thick in Cement Mortar 1:4 backing coat complete including dismantling of existing tile and disposal of to outside MD land all as specified and as directed.

M&L for Preparation of old decorated plastered or unplastered surface of wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spots and applying one coat oil bound distemper complete all as specified and as directed.

M&L for Preparation of old painted wooden surface of any description and applying one coats of synthetic enamel paint using mechanical means, not otherwise described over 10 cm width or girth, complete all as specified and directed. Note :- An amount of Rs 73225.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum.

SHIVAA CONSTRUCTIONS

LAKSHMI CONSTRUCTIONS

SRI GANESH ENTERPRISES

SRI LAKSHMI VENKATESHWARA ENTERPRISES