PROVISION OF HARDSTANDING AND BOLLARDS FOR WALKING PLAZA AND SPECIAL REPAIRS TO OLD MT SHED AT AF MOHD PUR STATION UNDER GE AF GURGAON

Amount

Dismantling asbestos cement (corrugated or semi corrugated sheets in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc complete including dismantling of floor tiles etc complete all as specified and as directed all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding/bracking, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by the Engr- in- Charge.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed .

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed by Engineer-In-Charge .

Supply & fixing for rolled MS joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary length i.e. within 20mm of the length indcated) using Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M &L for Non Skid joint free ceramic tiles (colour) 7 to 8 mm thick , (square / rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed.

M&L for Glazed ceramic tiles coloured in vertical surface 300mmx 450mm , 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed.

M&L for TMT bars 6 to 8 mm dia dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed.

M&L for pre-cast reinforced cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) in door and windows frames any size single or double rebated, including arrangement for fixing of hinges and fitures as required etc complete all as specified and as directed.

M&L for framed work as in grills, grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed baluusters wals ways, railing framed wor of water tans and similar work etc complete all as specified and as directed.

S&F Welded steel wire fabric not exc 4kg complete to wood or steel members complete all as specified and directed.

S&F factory made plain, framed panelled shutter (any number of Panels) 35 mm thick 2nd class hardwood with panels of timer flat on both sides (feather edged), or of veneered particle board medium density, woood particle board with commerical face veneers etc complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed .

S&F factory made pane PVC door shutter 30 mm thick (style) consisting of frama made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channeld having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom ral : panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed.

S&F power coated Box type window / ventiliators (Steel) with fly proof shutter, as per drawing No CEAF/STD-171/07 sheet No 1/1 to 4/4 dated 05.11.2007, fixed with dash thru bolts of standard quality, 100 mm long handle in each shutter, 2 Nos tower blots 150 mm long & three hinges of each shutter of 75 length etc including 4 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperature, mild steel guard bars/ girlls with with frames etc complete all as specified and as directed Notes : Wire mesh, Glass & guard shall be measured and paid sepearately under respective items of this schedules.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

S&F 100 mm thick butt hinges, heavy weight, cold rolled mild steel and fixed etc complete all as specified and as directed.

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

S&F 100 mm long rawl plugs with 6 mm dia & over screws, fixed to PVC door frame with all etc complete all as specified and as directed.

S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.

S&F as in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specifiedand directed.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed.

S&F in repair 15 MM bore fancy type, chromium plated with long shank and cup (concealed type) Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed.

S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed.

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed.

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and fair mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately

Supply only WPC complete all as specified and as directed.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete wall surface on ceiling etc complete all as specified and as directed.

M&L for three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for three coats of white wash on ceiling on Old plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for three coats of white wash on Old Plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for preparing new plastered surface of walls with 3mm thick Birla/Asian wall care Putty and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed.

M&L for preparing Old plastered surface of walls with 3mm thick Birla/Asian wall care Putty and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed.

M&L for preparing Old plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed.

M&L for preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

M&L for preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Dismantling existing unserviceable water proofing treatment on horizontal or vertical surface, flushings and junctions of papapetts etc and cleaning all as specified and directed by Engr in charge.

M&L 25 mm thick for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof padding mixed with WPC @ 3% wt. of cement all as specified and directed by Engr in charge. Note : WPC will be measured seperately.

M&L for 3 mm thick APP modified prefabricated in five layers & weight not less than 3.6 Kg/Sq mtr water proof membrane reinforced with non-wooven polyster with two coat of aluminium paint over top surface of water proofing membrane with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused with LPG flames laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous of primer 0.30 ltr per sqm as per manufacturer instruction of APP modified membrane etc complete all as specified and as directed.

S&F Steel rolling shutters with 1 mm lath thickness, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete but gear operated type with bevel gear box and crank handle complete all as specified and as directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F Ball bearing for rolling shutter complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 mix, type B1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L for plinth protection 75mm thick in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate ) laid in alternate bays (not exc. 2sqm each) finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection filled with mastic filling comprising one part of bitumin 85/25 graded and three parts of sand by weight complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete comprising of Fe 410 -W (GdeE- 250) quality complete all as specified and directed.

S&F 1mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

Excavation in trenches n.exc 1.50mtr wide and 1.50mtr in depth for foundation etc or for shafts, wells cessipts, manhole etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr deth and getting out in soft /loose soil etc complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded aggregates) as in foundation and mass concrete etc complete all as specified and directed.

M&L for cement concrete type B-1 (1:2:4) with using 20mm graded stone aggrgates) as in surface channels and drains etc complete all as specified and as directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed.

M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregates as in cover slabs (for manholes etc)chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and directed. Note - Reinforcement shall be measured and paid separetly.

M&L for reinforced cement concrete drain pipes of 200 mm dia bore class NP-2, laid and jointed complete with collars etc complete all as specified and directed by Engineer-In-Charge.

M&L for concrete bed to drain pipes 200 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed laid in trenches or in floors etc complete all as specified.

S&F in repair 110 mm dia PVC (SWR)bends with rubber rings joints fixed as required complete all as specified.

Returning filling in, with soil inlcuidng spreading, levelling, watering and well ramming in layers not exc 25 cm thicks etc complete all as specified and as directed.

Removing excavated soil/ building material/debries to a distance exc 250 mtr but not exceeding 500 mtr and depositing where directed etc complete all as specified and directed.

Dismantling of boarding any description, fixed in any position with nails complete all as specified and directed.

S&F plain PVC sheet 2mm thick fixed to position with steelscrews complete all as specified and directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specififed and dircted by Engr-in-Charge.

M&L for Removing excavated material to dist n.exc 50m where directed at a level n.exc 1.5m from the starting point complete all as specified and dircted.

M & L for 100 mm PCC 1:4:8 type D2 (Using 40mm graded stone aggt) as in subbase complete all as specified and dircted.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 – 2006 of 60 mm thickness, M-35 Grade, with grey cement and pigment,over new sub-base complete all as specified.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and dircted.

M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate), in plinth courses, kerbs and the like including weathering, slightly rounded or chamfered on edges and throating complete all as specified.

M&L for Pre-cast kerb stones of cement concrete 1:2:4 (20 mm graded stone agg) factory made , size shape, pattern and finished as approved , incl rounding, chamfered or half round and bedded of perfectly levelled surface pointed and jointed in CM 1:4 etc completed all as specified and directed by Engr-In-Charge.

M&L for preparation of new or previously untred concrete or plastred surface and applying two coats of synthetic enamel paint over one coat of priming paints plaster coat etc completed all as specified and directed by Engr-in-Charge.

Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and asdirected.

Taking down carefully by unscrewing from the boards/outlets boxes fittings and fixtures such as switches, sockets ceiling, rose, lamp holders, tube light fittings, regulators etc and making good of disturbed surfaces complete all as specified and asdirected.

Taking down unserviceable main switches MCB DB’s incl MCB SP/SPN/TPN of any make and type including teakwood board etc complete and making good the disturbed surfaces including colour wash complete all as specified and asdirected.

Taking down ceiling fans / wall mounted fans of any size / sweep after disconnecting the wire fro existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, oiling and greasing complete including providing flexible twin core copper conductor stranded cord from ceiling rose to connecting of fan complete all as specified and asdirected.

Taking down exhaust fans of any size / sweep after disconnecting the wire fro existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, oiling and greasing complete including providing flexible twin core copper conductor stranded cord from ceiling rose to connecting of fan complete all as specified and asdirected.

Taking down carefully sub main wiring complete with conductor, cast conductor and PVC casing and coping and make good to the disturbed surfaces complete all as specified and asdirected.

M&L for point wiring for light/fan points controlled by two, two way switch using 1.5 Sqmm nominal cross sectional area copper conductor multistranded, PVC insulated unsheathed FRLS cable in and including Heavy duty 2mm thick ISI marked concealed conduit of suitable dia complete with all ISI marked PVC conduit accessories/ fittings and 1.5 sqmm nominal cross sectional area stranded copper conductor PVC insulated unsheathed FRLS green colour cable earth wire and connecting to earth dolly etc. complete all as specified and directed. The point wiring shall include the wiring of light/ outlets of any length from the distribution board via switch to the point.

All as per item No 102 hereinbefore but One socket outlet 5 Amps on the same board.

All as per item No 102 hereinbefore but One 3 pin socket outlet 5 Amps independent.

All as per item No 102 hereinbefore but One 3 pin 5 amps socket outlet indepen dent but below the switchboard of light points in the same vertical plane

All as per item No 102 hereinbefore but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 15 Amps independent socket .

All as per item No 102 hereinbefore but socket outlet independent but below the switch board of light points in the same vertical plane with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 15 Amps.

S&F piano switch flush type 5 Amps 230 Volts single pole one way completed all as specified and as directed by Engr-in-Charge.

S&F piano switch flush type 15 Amps 230 Volts single pole one way completed all as specified and as directed by Engr-in-Charge.

S&F socket outlet combination 2 in 1, 3 pin 5 Amps flush type universalcompleted all as specified and as directed by Engr-in-Charge.

S&F socket outlet combination 2 in 1, 3 pin 15 Amps flush type universal completed all as specified and as directed by Engr-in-Charge.

S&F ceiling rose surface bakelite 3 terminal with base plate completed all as specified and as directed by Engr-in-Charge.

S&F steped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc completed all as specified and as directed by Engr-in-Charge.

M&L for submain wiring with 2 single core PVC FRLS insulated, unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 6 Sqmm drawn through rigid PVC heavy grade concealed conduits incluidng 4 Sqmm PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified, directed and shown on drgs. (Note :- Two runs of cables and continuous earthwire in conduit will be measured as one length of sub main .)

M&L for submain wiring with 4 single core PVC FRLS insulated, unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 4 Sqmm drawn through rigid PVC heavy grade concealed conduits incluidng 2.5 Sqmm PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified, directed and shown on drgs. (Note :- four runs of cables and continuous earthwire in conduit will be measured as one length of sub main.)

Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F MCB DB Single pole & neutral 8 way 240V sheet metal enclosure double door with common bus bar and neutral link complete to fixtures, complete all as specified and directed by Engr-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN poles and 40 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing Rigid non-metallic PVC conduit 25 mm dia exclusive of boxes (junction/terminal) but inclusive all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 3core complete all as specified & directed by Engineer - In - Charge.

Supply and laying sand in trenches for protection of cable sand cushioning to cable 8 cm thick below cable and 15 cm thick above cable in layers all as specified and as directed.

M&L for brick protection with sub class 'B' old bricks laid dry flat 23cm in width over sand cushioning in trenches as perpendicular to the direction of underground cable complete all as specified & directed by Engineer - In - Charge.

supply and lay in treches for fixed Wall/floor or passing through ducts GI tubi light grade of sizes upto 80mm as per site requirement for protection of UG cable with necessary fittings complete all as specified & directed by Engineer - In - Charge.

M&L for carrying out horizontal boring below roads/PCC hard standing/Drain suitable Up to 100mm dia GI pipe as per site requirement all as specified as directed for inserting GI pipe of the following sze with a depth upto 1.5m & length of road upto 12m of the follwing size of bore complete all as specified & directed by Engineer - In - Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed by Engineer - In - Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified & directed by Engineer - In - Charge.

S&F LED bollard of 9 watt with soft 360° light, IP 65 protection, Resistant to corrosion for better optics and uniform distribution including making foundation (As per manufacturer specification) for bollard light along with bolt integrated with PCC and nut & washer to tightened bollard light and making provision for cable entry and exit through pcc block, complete all as specified and directed.

Supply and laying in trench and laying & passing through PVC conduit pipe, 1100 volts grade heavy duty cable with PVC insulated cable multi stranded copper conductor water proof cable served with an inner sheathing of PVC tape 4 core, 4 sq. mm nominal cross section in service connections including thimble, glands etc for cable at every junction, complete all as specified and directed.

Supply and laying GI Tubes, 'light grad', galvanised, of size 40mm dia laid in trenches for cable protection, complete all as specified and directed.

S & F of treminal control street light box double door hinged,with suitable size of bus bar 4 Nos (03 Nos for phase 01 No for neutral water , vermine & weather proof, made out of CRCA sheet , steel not less than 1.6mm thick duly painted of size 325x220x150mm including fixing arrangement and fixed to concrete pole/steel pole with steel clamps, complete all as specified and directed. Note : - The rates quoted are inclusive of provision and fixing fo suitable lugs and glands for cable connection and suitable clamps with nuts and bolts etc for fixing of terminal box to pole.

Shakashi Construction Co.

P R Constructions