Trommel Machine with Magnetic Separator, Air Blower and Conveyor System Capacity - 50TPD with complete installation testing commissioning Complete Work under municipal council chhatarpur

Amount

Trommel Machine with Magnetic Separator, Air Blower and Conveyor System Capacity - 50TPD with complete installation testing commissioning Complete Work under municipal council chhatarpur

Trommel Machine with Magnetic Separator, Air Blower and Conveyor System Capacity - 50TPD with complete installation testing commissioning transportation charges etc. Trommel Machine - 08 TPH Material Mild Steel (confirming to IS:2062) Length (mm) 10000 Shell Diameter (mm) 2500 Ring Diameter (mm) 2000 Hole Size (mm) 60 and 250 ( minimum 90 hole of 60 mm and 10 hole of 250 mm in per m2 of screen) Shell thickness 10 mm MS confirming to IS:2062 Screen thickness 08 mm MS confirming to IS:2062 Screen type Bolted & Replaceable (if damage during operations) Inclination 5° RPM 8-14 (controlled through Variable Frequency Drive) Knives Should be effective in tearing bags, installed inside the trommel screen in the first 3 (three) m after the material feeding point. High Carbon Steel (Confirming to IS 7226:1974) knives may be easily replaceable. Bolted design is preferred. Different configurations (positions) of knives inside the trammel are possible as per requirement. Power supply Electric (3 phase), 440V, 50 Hz, 4-pole Motor(02 numbers) 5.5 kW (7.5 HP), 1440 rpm, copper winding, 3 phase, 4 poles Surface Finish Epoxy Paint Coated Stand/Legs & material Minimum 06 MS legs (Confirming to IS: 808-1989) Magnetic Separator- Type Automatic Cross Belt Overhead Magnetic Separator Application Separation of ferrous material from Municipal Solid Waste Magnet Unit Permanent Magnet of High Intensity Strontium Ferrite Magnets without power requirement Magnetic Poles Covered with non-magnetic stainless steel plates confirming to IS : 10632 Bottom plate Heavy, wear resistant manganese steel confirming to IS:276 Suspension Four point suspension Construction Two U section pieces fixed on magnet with fastening ears supporting bearing drums Bearing Drums With shaft mounted on removable hubs Belt driven Reduction gear coupled to electric motor Working distance (mm) 300 – 390 Belt width – Across (mm) 1200 Motor kW 3.0 Belt type Belt with 35 mm high studs Length of magnet (mm) 1100 Width of magnet (mm) 1520 Depth of magnet (mm) 250 Air Blower- Capacity 1500 CFM Working temperature 30° C Pressure 750 mm WC Drive Direct foot mounted fan Recommended motor power 11kW or 15 HP, 3 phase, 4-pole, copper winding, Confirming to IS 12615:2011 Blower RPM 2900 MoC of Casing 3 mm MS fabricated MoC of Impeller MS fabricated Balancing As per IS 1940, grade 6.3 Standard accessories Set of both ends companion matching flanges, Duly painted with epoxy primer and synthetic paint / HR paint. Power Supply 440 V, 50 Hz Electric Motor Standard IE2 rating ABB or BBL or CG make or equivalent Conveyor System- Conveyor Belt width must be more than 800 mm width for reject and under size of 8 meter while more than or equal to for feeding conveyor of 1000mm width and length 8 meters. Before Feeding Conveyor segregation conveyor- 4-meter strength space for manual segregation. Ground clearance must be sufficient to fulfill daily cleaning and removal of recovered materials.

MA DHOOMAVATI ENTERPRISES (BID ID -1105385)

ADVANCED RENEWABLE ENERGY (BID ID -1105404)