Renovation of IEI and EEI , providing new 1.5 HP electric pump set and providing new air conditioner in External Sit Out at DGP Bungalow, Sri Vijaya Puram. Sw Renovation of IEI and EEI , providing new 1.5 HP electric pump set

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch (Make : Anchor, Model : Roma, Code : 21011 or equivalent), modular plate (Make : Anchor, Model : Roma, Code : 30227WH or equivalent) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch (Make : Anchor, Model : Roma, Code : 21011 or equivalent), modular plate (Make : Anchor, Model : Roma, Code : 30227WH or equivalent) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group A

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

1 x 1.5 sq. mm

2 x 1.5 sq. mm

3 x 1.5 sq. mm

3 x 2.5 sq. mm

Supplying and fixing following module Grid & Cover Frame on the existing modular boxes:

3M Grid & 3M Cover Frame [(Make : Schneider, Model : ZENcelo, Cat. No.:IN8403C(SZ)]

4M Grid & 4M Cover Frame [(Make : Schneider, Model : ZENcelo, Cat. No.:IN8404C(SZ)]

6M Grid & 6M Cover Frame [(Make : Schneider, Model : ZENcelo, Cat. No.:IN8406C(SZ)]

8M Grid & 8M Cover Frame [(Make : Schneider, Model : ZENcelo, Cat. No.:IN8408C(SZ)]

12M Grid & 12M Cover Frame [(Make : Schneider, Model : ZENcelo, Cat. No.:IN84012C(SZ)]

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

6 AX 1 way switch with Neon, 1 module, ISI [(Make : Schneider, Model : ZENcelo, Cat. No.:IN8481(BZ)]

16 AX-20A 1 Way Switch wth Neon, 1 module [(Make : Schneider, Model : ZENcelo, Cat. No.:IN8481/16(BZ)]

6/16 A, 3 Pin Socket with Shutter - 2 module [(Make : Schneider, Model : ZENcelo, Cat. No.:IN8426/16 (BZ)]

6A Bell Push Switch with Neon-1M [(Make : Schneider, Model : ZENcelo, Cat. No .: IN8485(BZ)]

Fan Regulator(5 Speeds), 2 Module [(Make : Schneider, Model : ZENcelo, Cat. No .: IN84SFR(BZ)]

Supplying and fixing following size/ modules, Surface Plastic box/GI Box along for modular base & cover plate on surface/in recess etc. as required.

2 Module (Make : Anchor, Code : 21281 or equivalent)

4 Module (Make : Anchor, Code : 21292 or equivalent)

6 Module Concealed GI Box (Make : Anchor, Code : 35455 or equivalent)

Supplying and fixing following modular base & cover plate of approved model on the existing modular boxes.

2 modules (Make: Anchor, Model: Roma, Code : 30227WH or equivalent)

4 modules (Make: Anchor, Model: Roma, Code : 30249WH or equivalent)

6 modules (Make: Anchor, Model: Roma, Code : 30250WH or equivalent)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

10AX 1 Way Switch, 1 module, ISI (Make: Anchor, Model: Roma, Code: 21011 or equivalent)

20 A 1 Way Switch, 1 module, ISI (Make: Anchor, Model: Roma, Code: 21066 or equivalent)

6 A, URO 2 Pin socket - 1 module (Make: Anchor, Roma, Code: 21667 or equivalent)

6 A, 3 Pin socket - 2 module, ISI (Make: Anchor, Roma, Code: 21102 or equivalent)

6/16 A, Twin socket(ISI) - 2 module (Make: Anchor, Roma, Code: 30828 or equivalent)

100W Fan Regulator - 1 module, ISI (Make: Anchor, Roma, Code: 22546 or equivalent)

Supplying and fixing the following way plastic switch board (ISI marked) on surface:

2 way ( Make: Press Fit, Code : 563051 or equivalent)

3 way ( Make: Press Fit, Code : 563091 or equivalent)

4 way ( Make: Press Fit, Code : 563101 or equivalent)

8 way ( Make: Press Fit, Code : 563271 or equivalent)

12 way ( Make: Press Fit, Code : 563391 or equivalent)

2 way, 16A ( Make: Press Fit, Code : 563121 or equivalent)

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Bell push

Supplying and fixing 100 W, Deluxe Fan Regulator Rotary Step (Make: Anchor, Code : 38660 or equivalent) on the existing switch board including connections etc. as required.

Supplying of following LED recessed downlighter of required shape), CDL/NW/WW with die cast aluminium housing with minimum efficacy of 100 lm/w ( Make: Philips, Model: Dura Slim or equivalent).

Supplying of decorative wall light of metal body finish of bronze colour suitable for 1x E27 LED lamp( Make: Philips, Model No. : 31425 or equivalent ).

Supplying of 2W LED Focussed Spot Light, WW ( Make: Philips, Model: Astra Spot or equivalent ).

Supplying of 3W LED Focussed Spot Light, WW ( Make: Philips, Model: Astra Spot or equivalent ).

Supplying of 7W LED Focussed Spot Light, WW( Make: Philips, Model: Astra Spot or equivalent ).

Supplying of 7W LED COB Spot Light of minimum efficacy of 90 lm/w, WW( Make: Philips or equivalent ).

Supplying of 4', 20 W LED Batten (integrated), CDL/WW/NW ( Make: Philips, Model: Astra Line or equivalent).

Supplying of Philips 17W Ultron Wall Light, CW/WW (Product Code : 919215850332/919215850331).

Supplying of Philips 36W Ultron Edge Metal Wall Light, CW/WW (Product Code : 9192158500977 /919215850976).

Supplying of 5W one-way LED Wall Washer, WW, IP65 (Make: Philips, Product Code : 582060 or equivalent)..

Installation ,Testing, Commissioning of all LED wall bracket /ceiling fittings of all sizes and shapes , complete with all accessories including connections etc. as required.

Supplying of Ornate Wooden Table Lamp suitable for 1xE27 LED lamp ( Make: Philips, Model No.: 582026 or equivalent ).

Supplying of Ornate Wooden Floor Lamp suitable for 1xE27 LED lamp ( Make: Philips, Model No.: 582084 or equivalent ).

Supplying and fixing following LED lamps (CDL/WW) on the existing lamp holder:

4W, E14/E27 ( Make : Philips or equivalent )

9W, B22/E27 ( Make : Philips or equivalent )

5W, B22 ( Make : Havells or equivalent )

Supplying of decorative 1200 mm A.C. Ceiling fan, BLDC, 5 Star without remote of approved colour with maximum power consumption of 32 W suitable for operation on 230 volts, single phase, 50 Hz, AC supply (Make: Crompton, Model: Energion Groove or equivalent).

Supplying of energy saving 1200 mm A.C. Ceiling fan, 5 Star and ISI marked with maximum power consumption of 36 W suitable for operation on 230 volts, single phase, 50 Hz, AC supply ((Make: Crompton, Model: HS DURO (energion induction) or equivalent)).

Supplying of 600mm A.C. Ceiling fan suitable for operation on 230 volts, single phase, 50 Hz, AC supply (Make: Orient, Model: New Breeze or equivalent).

Supplying of 900mm A.C. Ceiling fan suitable for operation on 230 volts, single phase, 50 Hz, AC supply (Make: Orient, Model: New Breeze or equivalent).

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing LED Aluminium Profile of approximate size 12 mm x 9 mm (width x height) on the existing wooden surface (Make:Ace, Product Code : ACE-F-078 or equivalent).

Supplying and fixing LED Aluminium Profile of approximate size 7.5 mm x 9 mm (width x height) on the existing wooden surface (Make:Ace, Product Code : ACE-F-148 or equivalent).

Supplying and fixing following LED Strip Light Driver on the existing surface including connection etc. as required.

2A LED Strip Light Driver on the existing surface, BIS approved (Make:ACE, Product Code : ACE-S24-12 or equivalent)

5A LED Strip Light Driver on the existing surface, BIS approved (Make:ACE, Product Code : ACE-S60-12 or equivalent)

12.5A LED Strip Light Driver (Make: LUKER, Product Code : LSD12 or equivalent)

20A LED Strip Light Driver (Make: LUKER, Product Code : LSD20 or equivalent)

Supplying and fixing 12V indoor LED Strip light of 60 LED per mtr. with minimum 6W/mtr., WW( Make: Luker, Product Code: LS2835 or equivalent) including connection etc. as required

Supplying and fixing 12V indoor LED Strip light of 240 LED per mtr. with minimum 17W/mtr., WW ( Make: ACE, Product Code: ACE-2835-240LED-12V or equivalent) including connection etc. as required.

Supplying of exhaust fan of 250 mm. sweep (Non Metallic ) (Make:Crompton, Model: Brisk Air Neo or equivalent).

Supplying of exhaust fan of 150 mm. sweep (Non Metallic ) (Make:Crompton, Model: Brisk Air Neo or equivalent).

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

12 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying & fixing of Modular AC Box with 20 A SP MCB in plastic enclosure & Unbreakable Heavy Duty with ISI Plug Top including connections etc. as required (Make : Anchor, Code : 98488 or equivalent).

Supplying, installation, testing and commissioning of 3 litres/3KW Instant Water Heater, 5 Star, ISI marked (Make: Crompton, Model: Rapidjet, Product Code: ASWH1615 or equivalent complete with heavy duty water connection pipe etc. as required.

Supplying and fixing premium Electronic Door Bell suitable for single phase, 230 V (Make: Anchor, Model: Shan Wood Finished Sterio, Code.: 38830 or equivalent ).

Providing and fixing of 100 Amps, TPN Switch Disconnector fuse (Main switch) in sheet steel enclosure (Make : Indo Asian, Cat. No.: IN1SA100 or equivalent) with 03 nos of HRC fuses (Make : Indo Asian, Cat. No.: IEDCP100 or equivalent) on the wall/surface including its connection etc. as required.

Providing and fixing of following 3 phase Submersible Pump Controller with Single Phase Preventer including drilling holes, making connections etc. as required.on the wall/surface including its connection etc. as required.

5 HP (Make : L&T, Cat. No.: SS97756COVO or equivalent)

3 HP (Make : L&T, Cat. No.: SS97756COTO or equivalent)

Providing and fixing of following single phase Submersible Pump Controller including drilling holes, making connections etc. as required.on the wall/surface including its connection etc. as required.

0.5 HP (Make : L&T, Cat. No.: SS97728OOVE or equivalent)

1 HP (Make : L&T, Cat. No.: SS97730OOVE or equivalent)

2 HP (Make : L&T, Cat. No.: SS97732OOCG or equivalent)

Supplying of following size XLPE insulated armoured LT power cable of 1.1kV grade with aluminium conductor, conforming to IS 7098 (Part 1) 1988 (Make: Havells or equivalent).

3.5 core X 25 sq.mm

Supplying and laying of following size of DWC pipe along with suitable coupler conforming to IS 16205 (Part 24), 2018 (old IS 14930, Part 2,2001) complete with fitting and cutting, jointing etc. direct in ground (30 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required..

50 mm dia (OD-50 mm & ID-38 mm nominal)

Supplying and laying of following size of DWC pipe along with suitable coupler IS 16205 (Part 24), 2018 (old IS 14930, Part 2,2001 complete with fitting and cutting, jointing etc. directly on surface including clamping etc. as required.

50 mm dia (OD-50 mm & ID-38 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing DWC pipe as required. a) Upto 35 sq. mm

Upto 35 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on surface as required.

Upto 35 sq.mm

Supplying and fixing SMC Box with approx. dimension 350 mm x 250 mm x 138 mm (Make: Sintex, Code : GSMB 3425 or equivlent) on surface.

Supplying of Pedestal Light Fixture ( Bollard Light) of black colour suitable for 1xE27 LED lamp (Make: Luker, Product Code : LBF012E27 BK).

Installation, testing and commisioning of Pedestal Lantern ( Bollard Light)/Post Top Light on a platform of hexagonal base and top having each side of 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) with a minimum concrete height of 0.6 mtrs. including above and below ground level with suitable screws/ nuts & bolts and connections , earthing etc. as required.

Supplying and fixing 50W LED Flood Light (Make: Luker, Product Code.: LFLSL50NSG or equivalent ) including connection etc. as required including connection etc. as required.

Supplying, installation, testing and commissioning of 1.5 HP/1.10 KW Single Phase Monobloc Pump Set with Suc. x Del. : 32 mm x 25 mm having a minimum discharge of 1.95 lps at a head of 29.80 (Make: Kirloskar, Model : KDS-1540+ 1.5 32x25 1P NORYL MS or equivalent) including connection etc. as required.

Supplying and fixing 18W square shaped surface mounted luminaire(downlighter) of size 1'x1', CDL/WW ( Make: Crompton, Model: Polaris Nio-III or equivalent) including connection etc. as required.

Earthing with ASHLOK make SEE brand Safe Earthing Electrode, Type- 19, 48 mm dia., length 2.00 mtrs. or equivalent by filling inner space with 50 Kg(2 bags) Electrodite (Back Fill Compound ) required for safe earth electrode and providing masonary enclosure with C.I. cover plate having locking arrangement etc.as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

ICONAGENCIES (BID ID -48083)