Repair and renovation of Vivekananda boys hostel distempering work water proofing wood work at new University campus

Amount

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material outside the University Campus.

Demolishing mud phaska in terrracing including stacking of serviceable material and disposal of unserviceable material outside the University Campus.

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35 Kg per Cum of earth and gobri leaping with bhusa at 35 Kg per Cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat: With F.P.S. brick tiles

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester mat consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq.mt. by the same membrane manufacture of density at 25°C, 0.87-0.89 Kg/ltr and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physcial and chemical paraMeters of the membrane shall be as under : - Joint strength in logitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. 3mm thick

Making khurras 45x45cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1mx 1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing outlet complete.

Providing gola (Angular Fillet) 75 x75mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75mm deep chase

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part-I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked MS pressed bright finished butt hinges with necessary screws of required size including applying a priming coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part-I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick including ISI marked MS pressed bright finished butt hinges for cupbords with necessary screws of required size including applying a priming coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac)

Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 4.0 mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood For Cup Boards including applying a priming coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac)

Providing and fixing ISI marked aluminium butt hinges ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: size 100x63x3.2 mm

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colours, shades as approved by Eningeer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125mm

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 150x10 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110mm dia. 4 Kg/cm2 pressure (Make Astral/Prince/Uniplas)

Provoding & Fixing 18mm thick water proof ply (Green make) including the cost of nails , fevicol etc. (For beds of boarders)

Hire charges for welding set including the cost of electrodes and the labour etc. complete

P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm & 340 x 410 x 265 mm sizes resp. with automatic flushing cistern with C.I/ M.S brackets standard size of G.I flush pipe and CP brass spreaders with brass unions and GI clamps complete including painting of fittings and brackets, cutting and making good the walls in floors where ever required. One Urinal basin with 5Ltrs PVC white automatic flushing cistern of approved quality (Parry Ware /Hind Ware/Cera)

Removing dry or Oil Bound Distemper, Water Proofing cement paint and the like by scrapping and sand papering and preparing surface smooth including necessary repair to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including priming coat with cement primer. Two or more coats

Painting with synthetic enamel point of approved brand and manufacture of required color to give an even shade. (One or more coat). Wood surface

------------do--------------- Steel Surface

-----------do--------------- Plastered Surface

Repairs to plaster of thickness 12mm to 20mm in patches ncluding cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish outside the University Campus. With cement mortar 1:4 (1cement : 4 coarse sand)

Brothers & Co

RAJ KUMAR SALGOTRA

harbans Lal

Raman Sharma