Artistic, Ornamental, Mural, Furnishing, Renovation, Civil, Internal Electrification and other Allied work at Sansktiri Bhawan Banganga Bhopal (Second Call)

Amount

Providing and applying 3 coats of satin finish premium grade plastic emulsion paint of approved shade/quality (Asian royal, deluxe velvet touch j&n or nerolac) with roller on wall and other location as desired after making surface good to receive paint on it without spots or color difference at any place and providing smooth surface foreign matters, sand papering smooth filling in all holes & crapes applying lumbi/putty &rubbing down the surface on coats of cement primer rate to include for all tool. Labour scaffolding as reqd. complete as per instruction.

Providing and fixing wooden wall paneling on frame work in 50mm x25mm thick ms(isi pipe only) pipe section placed at 600mm c/c in both the direction as per detail drawing. The frame work shall be cladded with bwp grade 12mm thk ply ISI grade and finished in 4mm veneer or 1.5 mm thk mica (rate rs 1600 per/sqm approx.) isi mark of approved shade. All exposed wooden surface shall be dully melamine polished. All work shall be carried out as per detail drawing and instruction of architect/eng in charge(all ply board blackboard shall be of make only century ply, green ply, duro, archid

Providing and fixing wall paper resistance to high wear and tera fire retardant anti fungal and scratch resistant of marshals or equivalent make as per given design.

Providing and fixing in position imported pvc planks (Size 1200 mm x 50 mm) of approved shade and brand 550 gsm pile wt, gross wt 1800 gms graphic loop pile having thickness 2 mm-3mm with primary backing of polypropylene woven sect and secondary action back complete as per instruction, specifications and as per the direction of eng in charge, carpet and underlay to be installed with standard fevicol/Dunlop adhesive. The flooring to be installed agency or as approved with eighteen month warranty from principal from any manufacturing defects. The installation to be in line and level including the cost of all material, disposal of debris etc, complete to the satisfaction of eng in charge( inclusive of profile) basic rate of carpet –rs 75 per sq (make-unitex)

Performer model : 2 seater : 1200 (w) x 945(d) x 760mm(h) table desk height-front end 760mm ht, user end 740 mm ht, angle slant of 3 deg provided for better utilization and writing comfort of the user. Table bench height 440 mm ht and bench seat & seat back angle of 7 degree facilitates. Wooden sizes & specs : pre-laminated particle board confirming to is 12823 with pvc edge banding of below sizes, desk table size = 1200(w) x 400(d) x 18mm(t) - osl particle board, desk seat size = 1200(w) x 330(d) x 18mm(t) - osl particle board, seat back size = 1200(w) x 170(d) x 18mm(t) - bsl particle board, shelf size = 1200(w) x 300(d) x 18mm(t) - osl particle board. Under structure specifications: nos of specially designed oval or square ms pipe legs to support desk, book shelve, seat and back made of 30.5-25.5 x 16 mm size with 2.0 mm wall thickness in powder coating finish with necessary leg brackets for stability and rigidity. 4 nos of tie members with flanges of size 825(w) x40(d)x35 (h) x1.6mm-2.00mm thick crca welded with end bracket of 3mm thk to join with legs, desk, seat and back. 1 nos of perforated crca shelve covers of size 850 w x 200 h x 0.8mm thickness with powder coated finish.

Floor/wall wooden cladding: providing &fixing in position phenol bonded bamboo wood wall cladding at all height with planks of sizes 8-12 mm thick ,1000-1800 mm length (minimum) and 90-120 mm wide (minimum) in approved colour texture and finish, having performance appraisal certificate with necessary profiled edges fixed with 40mm ss screws 5 no in each tile to frame work made of second class teak wood of size 20x15 mm in center of each tile and bottom and top of work height 40x15 mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00mm thick expanded poly ethylene foam of density 40 kg/cum in two layers first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboo wood planks shall have minimum density of 1000 kg/cum& minimum hardness 1000 kgf with eco ect

Executive table with runner :-table size :(1500-1800 mm (L)x1000-900mm(w)x750mm(h))& side runner size:- (1000-1200mm(L)x450mm(w)x650mm(h) providing and fixing in position table as per design by using 25mm thk plywood for top and 18 mm thk plywood for all other horizontal and vertical members telescopic cpu stand/modular keyboard tray shall be provided of approved model and make .All exposed plywood surface to be finished with 1mm thk laminate & unexposed surface to be finished in matching coat of French polish in required Coates, including cost of all hardware ect work complete as per instruction architect/eng in charge (Furniture Greengard/bifma certified co)

Executive chair(high back) supplying and installing high Back chair model mint-1 ergonomically designed for contoured lumber support for extra comfort having seat made up of insert molded polyurethane foam of density 75 +/- 4 kg/m3 upholstered with foam laminated mesh fabric assembled over plastic seat cover the back made up of two pieces injection molded frame with the inner frame upholstered with mesh fabric and mounted on the main assembly, the armrest top made up of injection molded polyurethane and mounted on the injection molded height adjustable type armrest with height adjustable up to 45+-5mm synchronized pivot mechanism of 360 degree revolving type and having tilt with 3 position locking anti shock feature pneumatic height adjustment of 90 mm neck rest assembly mounted on top of back made up of polyurethane foam upholstered with foam laminated mesh fabric and having vertical adjustment up to 45mm &angular adjustment of 30 degrees ,the pedestal made up of die cast aluminum filleted with 5 no twain wheel castors which ar injection molded in back pp all complete as per manufacture specification and direction of eng in charge. (Make-HERMANMILLER/GODREJ/ WIPRO/ FEATHERLITE/HAWORTH) (Sample Chair Approved Before Supply)

Providing and placing of mid back revolving chair ,chair type bio Synchronic with fixed arm, ergonomic seat design, backrest made up two piece injection molded frame backrest symmetrical lumber support with material of aluminium die cast with abs/nylon pu foam covered with mesh fabric 220 gram gsm thickness of fabric 5% (gram/sam) with a warranty period of 1 year product must be approved before supply. (Make-HERMANMILLER/GODREJ/ WIPRO/ FEATHERLITE/HAWORTH) (Sample Chair Approved Before Supply)

Providing and fixing of chair pch 9u01r, , the seat and back are made up of 1.2+0.1cm. Thick hot pressed plywood measured as per qa method described in ocpqlta-p14-18 and upholstered with fabric and molded pu form together with molded seat and back covers-b. The back is designed with contoured lumber support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area, the high back size is 47cm w x 60 cm h and seat size is 47 cm w x 48cm d.The hr pu foam is molded with density 45 +-2kg/m cube and hardness load 16+2kgf as per is":7888 of 25% compression. The one piece armrest are injection molded from black co-polymer pp .Centre tilt synchro mechanism has 360 degree revolving type, upright position locking tilt tension adjustment, seat/ back ratio of 1:3. The pneumatic height adjustment has an adjustment stroke of 12 +- 0.3 cm. Telescopic bellow ASSY: it is 3 pc telescopic type and injection molded in black pp. The pedestal is injection molded in black 33% glass filled nylon 66 and fitted with nos. Twin wheel casters. The pedestal is 66.3 +- 0.5 cm. Pitch dia (76.3 +- cm with castors). (Make-HERMANMILLER/GODREJ/ WIPRO/ FEATHERLITE/HAWORTH) (Sample Chair Approved Before Supply)

Providing and fixing of Signal seater sofa of size 600mmX 650X400mm in length with primary/secondary frame structure made with 19mm BWP plywood and 70mm elastic belt and 10mm foam around the framing and legs of sofa made with first class best quality seasoned teak wood as per directed by Architect/eng in charge. Sofa should be have cushioning with 36D Foam+20mm thick 28 d foam 25mm butter foam and covered with white finish cloth and then with premium quality fabric upholstery. (Make- Greenguard/Bifma certified co)

Supplying and fixing of wooden sofa side table of (400mm L X400mm wx400mm H) Table top made with 19mm BWP plywood and finish with 4mm veneer or 1.00 thk laminated finished and legs and frame of table made with first class best quality seasoned teal wood as per detail. All work shall be carried out as per detail drawing and instruction of Architect/eng –in charge ( Make- Greenguard/Bifma certified co)

Providing and fixing of wooden centre table of size (800mm L X800mmWX400mmH ) Table top made with 19 mm BWP plywood finish with 1.00thk laminate and leg and frame of table made with first class best quality seasoned teak wood.All work shall be carried out as per detail and instruction of Architect/Eng in charge. (MakeGreenguard/Bifma certified )

Wooden partition(partly glazed partition) including design work on glass: providing &fixing in position partly glazed full height partition work as shown is design including glass shown in design in frame work at 250 mm x 250 mm grid(horizontally and vertically) section as per design with 50mmx50mm teak wood finished with melamine polish of approved shade and colors, item to include 8mm thick glass as per design work complete as per approved by designer.

WOODEN LOW HEIGHT PARTITION:-Providing and fixing of LOW height partially glazed partition 75mm thk till 4’ height made on frame work of 18mm BWP PLY GRID SIZE 600MMX600mm horizontally and vertically with 12mm thk ISI grade premium quality BWR plywood on both sides ,plywood should be finished with 4mm thk veneer/ 1.5mm thk laminate as per Drawing. The framework shall be secured to the flooring. The glass to be fixed with the help of wooden beading finished with synthetic enamel paint satin finish as per detail DWG,The rate shall include ant termite treatment all hardware fitting, adhesive beading (12mmx75mm) ect,to The rates are inclusive of all item including lead &lift and necessary to complete, the item in good conation noting shall be paid extra separately unless specified.

Providing and fixing Automatic sliding door operator compliant with European standard and produced according to the guideline for power-operated windows doors and gates Bgr 232 the UVV AND THE vdc Regulation TUV design tested for durability of 1MILLION CYCLES tested according to the low voltage guidelines fulfills DIN 18650 Standard for frameless glass door application modular design including internal cover and with 10/12mm glass for 1NO sliding door panel and 2 nos fixed panel. Operator &frame finish should be sliver Anodized E6/CO with operator dimensions (HXD) :100X180 mm and of length as required to suit the opening size given below operators shall be with self-balancing panel suspension system and with anti-jump fitting .The track profile should be separate from the main profile for enabling reduction in vibration insulation, with back plate for easy installation Microprocessor-controlled control unit self-learning with adjustable parameter for closing force reversing when obstruction is encountered with SMPS class of protection IP 20 Activators-Combination radars system (02NOS) on inside &outside light barriers comprising receiver and transmitter-01 pair with 5 position program Switch with knob operator Max panel weight carrying capacity of 1x120Kgs/2x100Kgs.The system shall have contant power supply 230V+5%50HZ ac.Automatic Bi parting panel frameless sliding door operator slinding door operator for up to 2.1 Mtr(Height)x1.8 Mtr(widt)openingwith 12mm thk toughen glass .

WOODEN FULL HEIGHT PARTITION:-Providing and fixing of full height partially Solid partition 75mm thk till roof height made on frame work of 18mm BWP PLY GRID SIZE 600MMX600mm horizontally and vertically with 12mm thk ISI grade premium quality BWR plywood on both sides, plywood should be finished with 4mm thk veneer/laminate as per Drawing. The framework shall be secured to the flooring and celling. The rate shall include ant termite treatment all hardware fitting, adhesive beading(12mmx75mm) ect,to The rates are inclusive of all item including lead &lift and necessary to complete, the item in good condition noting shall be paid extra separately unless specified

Proving and fixing of stainless steel body dust bin height 450mm-900 and dia 300mm-600 aisi 302 grade.

Providing and fixing of vista/marvel or equivalent verticalb dust Proof Roller/Zebra blinds of approved shade texture fabric (opaque / eclipse) with aluminum gear and rolling arrangement. Duly power coated with all necessary mechanism complete in all respects and properly finished to the satisfaction of eng in charge . The job shall include all material labor, wastages etc complete.

Providing & fixing in position computer table CHQ(size 1200 mm x 900 mm x 750 mm ) as per design including side storage by using 25mm thick plywood for top and 18mm thick plywood for all other horizontal and vertical members. Telescopic cpu stand/modular keyboard tray shall be provided of approved model and make. All exposed plywood surfaces to be finished with 1 mm thick laminate as per , (make-century, greenlam, acero, gold wood). (furniture Greenguard/Bifma certified co)

Supplying and installation of touch screen kiosk 21.5 inch Specification:- Type / Mounting : Free Standing, floor mounted with base and screw less chassis with wheels construction : 1.6 mm thick Display Type Type :21.5 inch color LED Touch Monitor Resolution :(1280 x 1024) Touch screen : Resistive Touch Brightness: 250 Nits dual core ,4GB Ram ,500 GB hard disk speakers inbuilt for 5 watts Cooling fan : provided as per required Weight: 45kgs approx. Overall Dimension : 419mm x 650 mm x 1400mm (B x L x H) Product Warranty :1 year Bidder Should have OEM Aurtorization along with technical Bid Approved Make Make : (Globus/AdvanceTech/ELPRO) Work complete as per instruction of academy director

Supplying and fixing LED signage i/c 6V. 9AH, lithium battery sealed 2hrs backup single side, hanged/fixed on wall or ceiling etc. as required with necessary material to complete the job. Guarantee as per tender agreement condition.

Providing and fixing of file storage cabinet 400-400mm wide file storage cabinet made up of 18mm BWP ply ,ply finished with 1.00mm thk laminated all drawer to be mounted on telescope channels of (Hettich/ebco or equivalent)approved make .All exposed edges to be finished with Ist quality beading.All inside surface to be finished with 1.00 mm thk laminated.The cost is inclusive of all material,accessory,SS handle lock labour ect complete. (Make-century,greenply,duro,archid)

Providing and fixing of thematic designer wall paper based on various aspects of thematic, fixing with high quality quick set adhesive. Work complete as instructed by architect & designer.

Providing & fixing wall mural work (mural work based on various theme) with various Material like metal wood glass acryl stone forex, cloth paper massy art work, texture & look : very natural looking with creativity. Anti uv stabilized polyester component, colors & pigment. Specification of materials : 450 gsm fiber -4mm thick, gp resin color - pigment color with resin. Basic material for models : plywood, pop, angle iron, iron rod, brass, copper etc. Can be used for basic structure. Work complete as instructed by architect & designer. Very special art work

"Providing and fixing of thematic canvas oil painting based on Various aspects of Theme with frame of seasoned teak wood Fiber canvas made on imported fabric ,work completed as Instructed by architect & designer"

"Providing & fixing of digital printing based on various aspects Of Thematic. With frame of seasoned teak wood / fiber, canvas Made on imported fabric . Work completed a instructed by architect and designer"

Supply, installation testing and commissioning of Pressure Pump (Hydro pneumatic) And optimal water pressure in commercial buildings.Crompton 1HP CFMSMB5D1.00-V24 Booster Pressure Pump Capacity 25 Ltr,Head (Mtrs) : 45-7 Mtrs, Warranty Months : 12 months on pump, 6 months on controller, Voltage : 230 V, Frequency : 50-60 Hz, Power (HP) : 1 HP

Aluminum Two track two panels sliding windows made of frame 67x50mm &sash 46x62 mm both having wall thickness of 2.3+-0.2 mm and single glazing bead/double glazing bead of appropriate dimension (Are of windows above 1.50 Sqm to up to 3.5 sqm)

Door Paneling :- Providing & fixing for paneling on walls /column /beam ect by using dimensionally stable and wrap free ISI marked plywood/blackboard/mdf sheet work shall be fixed to base in straight ling and proper plumb using screw ued in wall should properly fixed with M seal compound and rawl plug/The job shall be included all material labour wastage ect complete plywood marine grade IS 710 01) BWP Grade IS 5509 a) 18 mm thk plywood

Providing and fixing decorative laminate (Rate Rs. 3500-3800 per sheet ) as per ISI marine grade PVC Glue (fevicol) applied @0.45 kg per sqm to partition ,paneling roof beam or similar places as Architectural drawings as approved by consultant /Engineer in Charge & design and pattern having pin groove. b) 1.0-1.5 mm thick plain gloss satin finish (Make-Delta/Greenlam/Royal Touche)

Providing and fixing glass shutter or MS Steel sheet shutter library shelf with decorative laminated as per details gives in interior drawings6’9” to7’ approx. height shelf as per design to be made 50mmx50mm tubular pipe fixed in vertically position (maxi width 0.45 cm) shelf made by 50mmx50mm outer pipe and 25x25mm fixed center to center & fixing ms steel sheet ,applying priming coat of ready mixed red oxide on tubular pipe frame work finally all exposed surface covered 18mm thkBwp premium quality ply wood & finished with 1.00 mm thick laminate. The front openable shutter to be made 5.00mm thick plain glass or dotted steel sheet fixed on 50x50mm tubular pipe frame thick ,frames shall The unit to be fixed or movable as per side required or direction of in charge ,complete in all respect the unit to be measured in sqmt from front side ( five year warranty for manufacturer defect )

Acoustic sound proof Door panel with frame /and fixing 50-75mm thick acoustic sound proof door made out of teak wood door frame size of 75mmx125mm with 9mm BWP grade Ply on both side with 4mm thick on both side with 50mm insulation pad fill up in air up with ect

Providing and fixing for base frame work for partition /paneling on wall column or beam ect by using teak,sal wood,19 mm(ISI) laminated board, frame work using two face finished 75mmx75mm section and 400 mm c/c grid work i/c extra member at skirting level frame shall be treated with 5.0% dilute anti termite emulsion sprayed with &the frame shall work shall be fixed to wall and finally cover with 12mm thk 100 % BWP ply wood all exposed surface cover with 1.00mm thk(laminates colour approved before pasting by architect) laminated work complete all labour material wastage ect scaffolding and as per instruction of architect/Eng in charge. Plywood century,greenply,duro,archid or equivalent make

Supplying and installation of Interactive Panel size 65" or Higher,2GB Ram ,16 GB Storage, 4mm Toughened and Antiglare glass as per bid specification (Make Viewsonic/LG/Panasonic 4 GB Ram, 32 GB Storage Android 11 Rest as per bid or higher) Bidder Should have OEM Aurtorization along with technical Bid Approved Make

Installation & Testing Open Pluggable Specification (OPS) Software is the industry standard for connecting computer devices to large flat panel/interactive displays via a single universal internal slot. -Support : Windows 10, Windows 11 Linux Etc -JAE : HDMI 2.1 5120 X 2880 5k60HZ

Supplying and installation of 30X Video Conferencing Camera BR-VC30XH 30x optical zoom & 42x digital zoom with Using High Quality Tamron lens,Support AAC audio encoding, better sound quality and smaller bandwidth and Low-light High SNR of CMOS sensor conbined with 2D and 3D noise reduction algorithm. Resolution - 1080 P Pixels - 2.5 MP Color - Black Operating System Supported - Windows Warranty - 1 Year Connectivity - Wireless Built-In Micro Phone - Yes

Supply, installation testing and commissioning of Magnetic white marker board-providing and placing magnetic white marker board as per design (size 750x900mm)

Supply, installation testing and commissioning of Cordless microphone: conference audio system Make-AHUJA

Supply, installation testing and commissioning of Chairmen unit model cmc 4100 make ahuja or equivalent Make-AHUJA

Supply, installation testing and commissioning of Central amplifier model ma-4400 Make-AHUJA

Supply, installation testing and commissioning of Pa wall speaker model ws661-t Make-AHUJA

Installation charge of all PA System.

Supplying & Fixing heavy Duty Mild steel black/in-built decorative mesh finish megazine rack for library and office use only. Size (480mm x 1450mm x 340mm ). (Sample Rack and colour approved befor supply)

Providing and fixing ornamental Architrave carved out at superior quality GYSPUS board 12.5 mm Thick baton, rafter, for fixing on wall frames .,The rate shall include all material labour, scaffolding, two coats putty and applying three coats royal shine colour work complete as per instruction of architect

Supplying and testing & installation of Server of RFP Parameter:-Remoter power on/shutdown of server, Remote Management of server over LAN &wan With SSL encryption through gigabit management port should have virtual Media support with all required licenses, Remote KVM Server Health Logging, Management of multiple servers from single console with single source of truth for multiple sites. Automated infrastructure management for patch upgraded version upgraded etc., simplified management with analytics driven actionable intelligence, system tagging giving admin flexibility to provide metadata tag to each system attributes. Hardware profile based deployment of single policy to multiple servers simultaneously, Platform inventory and health status server utilization statistics collection( including firmware updates and diagnostic tools) Should provide an alert in case the system is not part of Oem Hardware compatibility test solution should be open and programmable providing Rest APL.SDK for Programming languages, Server Security secure boot(Firmware and bios level security) Provision to lock the system on Breach .Hardware root of trust /DUAL root of trust/Dual Root of Trust, server should provide policy based security, server should provide servers intrusion detection. “Malicious code free design”(to be certified by OEM) Provision for cryptographic firmware updates capability to stop execution of application/Hypervisor/operating system on predefined security breach, Secure/Automatic BIOS recovery, Network card secure firmware boot, in case of any security breach system should provide the lock down feature 01) COMPATIBLE CHIPSET 02) Display:-18.5” TFT 03) Processor Description :-AMD EPYC 8 CORE/16 Threads,3.0 GHz base frequency ,Min 32 MB Cache 04) Form factor:- 1 U RACK 05) Memory Slots:-16 DDR4 DIMMM Slots, Memory Frequency 2933 MHz 06) Memory configured:- 2x16 GB DIMMs 07) HDD Storage:-no of Slots-4 Capacity offered per SATA drive-2000 GB 08) RAID Controller:-0-10 09) Power Supply:-Platinum rated power supply 550 watts Maximum power consumption Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make - HP/Dell/Accer)

Providing & Fixing WI-FI Controller Wireless Highly reliable and highly secure controllers Sets up fast with a simplified GUI and intuitive dashboard Optimized for 802.11ac Wave 2 next-generation networks & Supports existing cables with Cisco Multigigabit Ethernet technology. Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/D-link/Cisco)

Providing & Fixing WI-FI Indoor AP 1200 mbps Wireless or Wi-Fi White AirPro 1200Mbps Access Point with Comply with IEEE 802. 11ac/b/g/n, dual-band, 1200Mbps Data Rate, 2x2 MIMO Technology .1*100/1000Mbps WAN Port, 1*100/1000Mbps LAN Port, faster Ethernet. Support active IEEE 802.3af 48V PoE standard. Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz). Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode in FAT AP. Make - TP Link. Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/D-link/Aruba)

Providing & Fixing WI-FI CF-EW72 1200Mbps 802.11AC Dual-Band Outdoor Wireless AP Router 2.4G+5.8G WI-FI Coverage Dasuny Bidder Should have OEM Aurtorization along with technical Bid Approved Make(Make- Digisol/D-link/Aruba)

Providing & Laying 6 core Armoured Fiber Optic Cable No. of Cores 6 Core ,Installation Temperature Range -30 To +70 Degree CelsiusOperating Temperature Range -40 To +70 Degree Celsius Jacket Medium Density Polyolefin Storage Temperature Range -40 To +75 Degree Celsius Crush Resistance 650 N/cm Impact Resistance 20 Impacts Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/D link /Finolex)

Providing & Fixing LIU 6 Port Fiber Optic Interconnection Units are the smaller basic cabinets and enclosures used in interconnecting, cross-connecting, or splicing applications in LANs at a premise location. Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/ Dlink/ Finolex)

Providing & Fixing LIU 24 Port Fiber Optic Interconnection Units are the smaller basic cabinets and enclosures used in interconnecting, cross-connecting, or splicing applications in LANs at a premise location. Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/ Dlink/ Finolex)

Providing & Fixing 24-Port Web Smart-III PoE GIGA Switch · TP-Link TL-SG108S 8-Port Desktop Gigabit Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/ Dlink/ Finolex)

Providing & Laying Cat 6 Networking Cable UTP Outdoor 100% Copper and no mix of other material The speed of a wired LAN is largely determined by how fast data is transmitted between computers and network components. Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/ Dlink/ Finolex)

Providing & Fixing SFP 1 GB Single-Mode Gigabit Mini-GBIC Module 1000BASE-LX/LH Compatible Cisco GLC-LH-SMD (SMF, 1310nm, 10km, Dual LC DO Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/ Dlink/ Finolex)

Providing & Laying LC to SC Fiber Patch Cable Single Mode Duplex - 9/125 OS1 - Beyondtech PureOptics Series Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/ Dlink/ Finolex)

Providing & Fixing terminate fiber optic cable two ways - with connectors that can mate two fibers to create a temporary joint and/or connect the fiber to a piece of network Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/ Dlink/ Finolex)

Providing & Laying transmission of communications signals optical fibers cable are laid down for which trenches are dug and the cable installed Bidder Should have OEM Aurtorization along with technical Bid Approved Make (Make- Digisol/ Dlink/ Finolex)

Providing & Laying transmission of communications signals CAT 6 cable are laid down for which trenches are dug and the cable installed (Make- Digisol/ Dlink/ Finolex)

Installation, Configuration & Testing of System.

Providing & Laying 50/60mm thick dana stone cladding work up to 8-10m height with Stone chips 15-30mm thick size of various colour fixed on wall to support aluminum frame fixed at 600c/c ,dana stone cladding on wall with special adhesive over 15mm thick bed of cement mortar, work complete architectural design and instruction of Eng.-in –charge(the aluminum frame ,clamp, all scaffolding including)

Supplying Testing & Commisioning of Normal & Cold Water Cooler with Storage Capacity [Litres] 20/20 - FSS/PSS,Voltas Water Cooler 20/20 - FSS/PSS 20L Overall dimensions of the unit (WxHxD) [mm] 364 X 505 X 1117 ,Cooling Capacity of the water cooler (liters/hour) 20 ,Storage Capacity of the water cooler (liters) 20 &Cabinet MaterialG.I POWDER COATED / SS Tank Stainless Steel with No of Faucets 1 ,Reciprocating Compressor,Refrigerant used R- 134 a Temperature Range 10 TO 25 °C (Make-Voltas/Eureka Forbes/usha)

Supplying Testing & Commisioning of RO water purifier with multiple purification process of RO+UV+UF+TDS Control.Purification Production Rate 20 L/hr., Dimensions(mm) 410 (L) x 260 (W) x 520 (H) Input Power Supply ,Single Phase 100-250 V AC, 50-60 Hz.(make-Aqua Guard/Kent/Eureka Forbes)

Providing and fixing satin stainless steel finish 600 mm and 32 mm dia handle H TYPE With nuts and screws etc. complete

Providing and fixing in position of Principal Secretary /Director Table overall size 1800-2000mm x750mm x 750 mm with front modesty. Table top made up of 25mm thick Pre-laminated particle board with 18mm modesty panel end legs 50x50mm 1.6mm thick powder coated ms pipe with 50-60 microns understructure All Wooden Panels Cleaning Corner Knitted Finish. All Wooden Panels, Gables & Modesty Fix Joints with Mini fix Dowels & Other Fitting Equipment. All Wooden Panels Prime Quality Board with ISI Marked. As per Architectural drawings as approved by consultant /Engineer in Charge. The rates are inclusive of all hardware including leads & lift and necessary to complete, the item in good condition nothing shall be paid extra separately unless specified. make-century, greenlam, acero, gold wood).(furniture Greenguard/Bifma certified co)

Providing and fixing Principal Secretary /Director Table side runner of size W 900mm x D 450mm x H 750mm. made of 18mm thick and top 36mm particle board. Side runner shall have one cupboard. Pedestal with three drawer shall be provided of 450mm width. As per architectural drawings as approved by consultant /Engineer in Charge. The rates are inclusive of all items including leads & lift and necessary to complete, the item in good condition nothing shall be paid extra separately unless specified make-century, greenlam, acero, gold wood).(furniture Greenguard/Bifma certified co)

Providing and fixing of security decorative customized glass film approved brand, shade, thickness on all glazing’s including doors as per design. The film should be 400 ft-lbs impact resistance, meeting ANSI Z97.1 (Class A) and 16 CFR 1201 (Category 2) impact requirements with film applied on annealed glass. As per architectural drawings as approved by consultant /Engineer in Charge. The rates are inclusive of all items including leads lift and necessary to complete the item in good condition nothing shall be paid extra separately unless specified

Providing and fixing open Book shelf of size 900mm x 450mm x 2100mm this is made in 18/19 mm thick ISI grade premium quality BWP grade ply and finished with 4 mm thick veneer/1.5 mm thick laminate ISI grade premium quality of approved shade. Architectural drawings as approved by consultant /Engineer in Charge. The rates are inclusive of all hardware, adhesive including leads & lift and necessary to complete, the item in good condition nothing shall be paid extra separately unless specified.

Removing and Existing Aluminium window [max. Size of window 1.80 Sqm] Reapir,change of Damage or Necessary part like Aluminium Section,Cleat Plate, Joint corner Handle, Tower Bolt Hinges, Refixing of window in existing position and finishing with Deco spray paint (Two or more coat) at all loctaion prepared and applied as per Manufacture's specification including priming coat work complete as per instruction of Architect.

Design, Suppy & Fabrication of Rectangular Shape windows box [max. Size 1500 mm X 1400 mm and two side (If Req. or as per site condition) 1500 mm X 150 mm and other side 1400 mm x 150 mm ] MS tubular section framework,exposed frame surface covering with welded steel wire fabric ,including cutting,hoisting fixing in position all Lift, labour and material. Finally applying a priming coat of approved steel primer, box finishing with black paint (Two or more coat) of approved brand & Manufacture,work complete as per instruction of Architect. The Bidder Shall quote his own rates for Item rates as BOQ1 item no. 1 to 70

Bidder Name

Amount

BHAWSAR CONSTRUCTION COMPANY(GSTN-23AGRPB4583E1ZH)