100 KVA Plinth Distribution Transformer Mr Paully Henry Fernandes Dmello Waddo Anjuna

COST OF MATERIAL

DTC Metering Unit

Common (AMR) Modem

11 KV Enamelled danger board 11000 vots CEE/E-490

Transformer Plingth

GI Tubular Fencing complete with gate and side dismanteling system as per the specification for DTC and FP(size 4Mx3Mx2M) with concreting for GI Fencing supports with plingth(0.3x0.3x0.5) CuMtsx12 nos each ratio 1:3:6 and bick masonary {galvanising should be hot dipped galvanised as per IS:2629/66, minimum zinc coating of 1000gms/sqmts, 140Microns DFT, suitable for high salinity coastal areas}

S&E of HDG earthing strip for connecting earthing pipe and other equipment of size 25X5mm

11 KV 630 A, outdoor, sf6 RMU unit with two two load break switch and one circuit breaker: Extensible/Non-Extensible Two (2) Motor operated load break switches (LBSs) with Manual operated earthing switches in SF6 and One (1) vacuum circuit breaker with Electrical closing and tripping along with disconnector and earthing switches SCADA Compatible and base channel. Battery charger along with batteries required for Electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS Module (N-1) but not less than 1 no’s per RMU. Suitable arrangement for mounting FRTU, modem or Ethernet Switch/LIU along with battery, battery charger shall be provided in RMU.

3C11KV armoured cable 300Sqmm

3C 11KV armoured cable 95 Sq.mm