Construction of 12 Nos. of PC/HC quarters at PALLATHUR in Sivagangai District

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

13.1) Filling with excavated earth

21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m

b. T.W. below 2.00 m length.

23.3) Supplying and fixing of Magnetic door catches

24) Manufacturing & supply of steel windows (weight basis)

25) Supplying and fixing of MS hold fast

30) Ellispattern flooring

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

40) Painting 2 coats - New "wood work"

41) Painting 2 coats - New "iron work"

46) Supplying and fixing of 20 mm dia Alu. Hanger Rod

47) Supplying and fixing of Alu. Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

49) Supplying and fixing of Chromium plated 8 gauge picture hook

50.3) Supplying and planting avenue trees

50.4) Providing Tree guard

52) Supplying and laying of PVC Water supply (ASTM) pipe a. 32 mm dia

b. 25 mm dia

52.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)

Electrical arrangements 69) Supplying and fixing of 15 Amp. Power plug point

72) Supplying and fixing of Box type Fibre Fan hook

73.1) Supplying and fixing of 3 phase Distribution board with 6 way per phase and 32A Fuse unit per way with neutral link

74) Charges for fixing of "Fan"

76) Supplying and fixing of 8 SWG G.I. wire

77.3) Supplying and fixing of TV/Telephone line Socket

77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)

81) Supplying and fixing of meter cupboard with best Country wood double leaves shutters

86) Providing Pre-constructional Anti termite treatment

Annexure 2.1.3) Supplying and filling with Crushed stone sand

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand a. In Foundation and basement

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand

6.7.1) Brick work in C.M. 1:5 (F& B) using fly ash bricks of size 23x11x7cm using crushed stone sand

8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

9.7.1) Brick work in C.M. 1:6 using fly ash bricks of size 23 x 11 x 7 cm using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

10.7.1) Brick partition wall in C.M. 1:4 using fly ash bricks of size 23x11x7 cm 110 mm tk (B.P.) using crushed stone sand b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand 70 mm tk (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

11.7.1) Brick partition wall in C.M. 1:4 fly ash brick of size 23x11x7cm 70 mm tk (B.P.) using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

12.1.1) Brick partition work in C.M. 1:4 using kiln burnt Country bricks of size 22 x11x 5 cm (8 ¾ "x 4 ¼ "x 2 ") using crushed stone sand 50mm tk. a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

14.2.2) Precast Cupboard slab 20mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 20MM thick a. In Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand 40MM Thick a. In Foundation & Basement

b. In Ground floor

c. In First Floor

d. In Second Floor

e. In Third Floor

16.1.1) Precast Jally ventilator 50mm thick using standardised concrete mix M20 Grade using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c. For Square and rectangular columns and small quantities

d. For Vertical wall

21.5.2) Supplying and fixing of solid UPVC door shutter with frame

21.6.2) R.C.C. Door frames of size 100x75mm with one edge grooves size 't' x 20mm using standardised concrete mix M 20 Grade using crushed stone sand a. 900 x 2100mm

22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws

23.1.1) T.W.single leaf door shutter using 9mm thick phenol bonded BWR grade plywood with brass screws. Suitable for door of size a. 900 x 2100mm

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

28.1) Floor plastering in C.M. 1:4, 20mm thick. using crushed stone sand

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.3) Finishing the top of terrace floor with one course of Anti reflective ceramic tiles (Cooling tiles) 305mmx305mmx7mm tk in C.M 1:3 20mm tk including Base concrete using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand

35.1.1) Plastering in CM 1:3, 12 mm tk. with WPC using crushed stone sand

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand

36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.4.1) Two coat of Oil Bound Distemper over the primer coat of white cement

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand a) Providing pit

b) Augering 30cm dia

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

50.5.1) Supplying fabricating and erection of M.S Scheme name board using crushed stone sand

52.4) Supplying laying fixing and jointing the following PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI specials c. 20mm dia

53.5) Supplying and fixing of Wash hand basin (white) of size 550 mm x 400 mm

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

56.4.3) Supplying and applying of 3mm APP Membrance of approved quality by means of gas torching, over the one coat of bitumen primer

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.

59.5.2) Supplying and fixing of Gully Trap using Kiln burnt country bricks of size 22 x 11 x 7 cm. using crushed stone sand

60.1) Supplying and fixing of PVC Nahani trap (4way/2way) using crushed stone sand

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

b) 160mm dia UPVC Non Pressure pipe

62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC PVC specials as per IS 10124/1982 Part II a) 110mm dia PVC Bend

62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 PVC specials as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself.

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.

71.2) Supplying and fixing of 32 Amps triple pole main switch

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

77.6) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed.

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

80.1) Supplying and fixing of 450x375x20mm T.W. plank

87.1) Supplying and fixing of Three Phase ELCB/RCCB

87.2) Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall with earth connection (For AC Plug)

99.1) T.W.single leaf Panelled door shutter with brass fittings Suitable for door of size a. 1000 x 2100mm

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED bulb with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light

103) Supplying and fixing of Bulk Head fitting suitable for 12 watts LED bulb

104) Supplying and fixing of 12 watts LED bulb for bulk head fittings

105.1) Run off main 4 wires of 4 Sq mm. (EB service connection)

112.1) Supplying and fixing of Exhaust Fan 225mm dia

344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm

367) Providing wooden melamen polish for main door new wood work

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

379.6.1) Supplying and fixing of Granite tile of size 2'x1', 10mm tk (Jet Black) for Kitchen hearth slab in cm 1:3, 12mm tk using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

383) Supplying and fixing of Cuddappah sink 600x600x200 mm

383.2) Providing single nosing to the edges of granite tile 10mm tk

448.2) Providing Tee with end cap 32mm dia instead of PVC Bottle trap

796) Two coat of Plastic emulsion paint including primer for outer wall surfaces

ALAMELU CONTRACTS

A VELANI