Repair Work of the residences of judicial officers located in the District-Court Hardoi

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two or more coats on new work (For Internal wall) PWD-13.60.1 (Including Labour Cess and Excluding G.S.T.)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied 1.43 Itr/ 10 sqm over and Including priming coat of exterior primer applied 2.20 kg/ 10 sqm) PWD-13.47.1 (Including Labour Cess and Excluding G.S.T.)

Providing and applying white cement based pulty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. PWD-13.80

Two coat of soligum or other approved presentative on new wooden work including supply of all material labour T& Petc. for completion of work PWD-654-655

Painting of Iron work on large area with one coat of primer and one coat of approved paint including supply, labour and T & P required for completion of the work PWD-644

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade. colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Plain white marble / Udaipur green marble / Zebra black marble, Granite of any colour and shade (a) Area of slab över 0.50 sqm DSR-8.2.2.2

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1) cement: 4 coarse sand) 25 mm thick DSR-11.26.1

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. DSR-11.27

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622. of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1.4 (1) Cement: 4 Coarse sand), jointing with grey cement slurry 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc, complete DSR-11.39

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of 10 steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete DSR-8.31

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622, of approved make, in all colours and shades, laid on 11 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand). including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600x600 mm DSR-11.41.2

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to 1.5. 15622. of approved make, in all colours & shade, in skirting, riser 12 of steps, over 12 mm thick bed of cement mortar 1:3 (1) cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm DSR-11.46.2

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts, lie, rods, grating etc. ( when not included in an over all rates) wrought to required form, including supply of steel bolts nuts and wastage etc and their fixing required for proper completion of the work Fabrication of window Fixed Grill PWD 502

Providing & fixing glass panes with putty and glazing clips 15 in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes DSR-10.30.1

Dismentaling ing existing plaster including disposal of refuse as directed by the Engineer in charge with in a distance of 60 mir (2001). (PWD 706)

12 MM Thick plaster with cement mortar in proportion of 1:3 cement &coarse sand(SOR-583)

Dismantling doors and windows including chowkhats with holdfast &including stacking of dismantled materials as directed by the Engineer-in charge with in a distence of 60 m(2001)PWD 703

Pre-laminated particle board with decorative lamination on one side and balancing lamination. on other side, Grade 1, Type II IS: 12823 marked DSR 22 9.7.53

Mild steel or iron work of small size and sections such as holding down bolts, hold fast tie ros, gratings etc,wrought to required from including supply of steel bolts nuts wastage etc and fixing required for Proper comletionof the work (a) Fabrication of Grill/Stair case SOR-502

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 9.74 3 150x10 mm DSR-9.74.3

Dismantling stone flagged or single tiled roof, any kind, Including purlin and battens and including staking of materials as directed by the Engineer in charge with in a distance of 60 meter (200ft) SOR-699

Supply of door closer Godrej or equivalent SOR-ch-1 (20a)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 1 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requirednd making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid DSR-17.2.1 2 Nos

roviding & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and 2 brackets, cutting & making good the walls wherever required. Flat back Wash Basin size 550x400 mm with single 15mm C. P. brass pillar tap DSR-17.7.4

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 3 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 250 mm DSR-17.10.1.1 1

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32 mm dia (for wash basin) DSR-17.28.2.1

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 40 mm dia (for sink and urinal) DSR-17.28.2.2

Providing & Fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR-17.31

Providing & fixing sand cast iron S&S trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting & 6 making good the walls and floors. (100 mm inlet & 75 mm outlet) DSR-17.60.2.2

Providing & fixing sand cast iron S&S trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting & 6 making good the walls and floors. (100 mm inlet & 100 mm outlet) DSR-17.60.1.2

Providing & fixing Sand Cast iron S & S coller (100 mm dia) DSR-17.57.1.1

Providing & fixing Sand Cast iron S & S coller (75 mm dia) DSR-17.57.2.1

Providing & fixing sand cast iron S & S bend of required degree with access door insertion rubber washer 3 mm thick, 8 bolts & nuts complete. (100 mm dia) DSR-17.38.1.1

Providing & fixing sand cast iron S & S bend of required degree with access door insertion rubber washer 3 mm thick, 8 bolts & nuts complete. (75 mm dia) DSR-17.38.2.1

Providing & fixing plain sand cast iron S & S Bend of required degree (100 mm dia) DSR-17.39.1.1

Providing & fixing plain sand cast iron S & S Bend of required degree (75 mm dia) DSR-17.39.2.1

Providing & fixing PTMT tot rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting 10 arrangement of approved quality and colour, 600 mm, long tow rail length of 645 mm. width 78 mm, and effective height of 88 mm, weighing not less than 190 gms. DSR-17.73.2 2

Providing and fixing PTMT Liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standerd 11 shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms DSR 17.71

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand 4 graded stone aggregate of 20 mm nominal size) over P.V.C. 12 sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete DSR-12.22

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to 15: 13502 Type A including 13 jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion - Single socketed pipes 110 mm dia DSR-12.41.2

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised-Rigid PVC rain water pipes conforming to IS: 13502 Type A including jointing with 14 seal ring conforming to IS 6382 leaving 10 mm gap for thermal expansion Bend 87.5 110 mm bend DSR-12.42.5.2

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised - Rigid PVC rain water pipes by means of 50x50x50 mm hard wood plug screwed with MS 15 screws of required length including cutting brick work and fixing in cement mortar 1:4 (1) cement: 4 coarse sand) and making good the wall etc complete. 110 mm DSR-12.43.2

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. DSR-12.44

Providing, fixing chlorinated polyvinyl Chloride (CPVC) plpes, having thermal stability for hot and cold water supply Including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jainting of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge Concealed work including cutting chase and making good the wall etc. (15mm nominal outer dia pipes) DSR-18.8.1

Providing, fixing chlorinated polyvinyl Chloride (CPVC) plpes, having thermal stability for hot and cold water supply Including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jainting of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge Concealed work including cutting chase and making good the wall etc. (20mm nominal outer dia pipes) DSR-18.8.2

Providing, fixing chlorinated polyvinyl Chloride (CPVC) plpes, having thermal stability for hot and cold water supply Including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jainting of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge Concealed work including cutting chase and making good the wall etc. (25mm nominal outer dia pipes) DSR-18.8.3

Providing, fixing chlorinated polyvinyl Chloride (CPVC) plpes, having thermal stability for hot and cold water supply Including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jainting of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge Concealed work including cutting chase and making good the wall etc. (32mm nominal outer dia pipes) DSR-18.8.4

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC soivent cement, 18 trenching, refilling & testing of joints complete as per direction of Engineer in Charge External work (75mm nominal outer dia pipes) DSR-18.9.8

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC soivent cement, 18 trenching, refilling & testing of joints complete as per direction of Engineer in Charge External work (100mm nominal outer dia pipes) DSR-18.9.9

Providing, fixing G. I. pipes complete with G. I fittings and clamps including cutting and making good the walls etc. (Internal work)-(Exposed on wall) (15mm dia nominal bore) DSR-18.10.1

Providing, fixing G. I. pipes complete with G. I fittings and clamps including cutting and making good the walls etc. (Internal work)-(Exposed on wall) (20mm dia nominal bore) DSR-18.10.2

Providing, fixing G. I. pipes complete with G. I fittings and clamps including cutting and making good the walls etc. (Internal work)-(Exposed on wall) (25mm dia nominal bore) DSR-18.10.3

Providing, fixing G. I. pipes complete with G. I fittings and clamps including cutting and making good the walls etc. (Internal work)-(Exposed on wall) (32mm dia nominal bore) DSR-18.10.4

Painting G.1. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work (15mm dia nominal bore) DSR-18.38.1

Painting G.1. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work (20mm dia nominal bore) DSR-18.38.2

Painting G.1. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work (25mm dia nominal bore) DSR-18.38.3

Painting G.1. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work (32mm dia nominal bore) DSR-18.38.4

Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) (20 mm nominal bore) DSR-18.17.1A

Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) (25 mm nominal bore) DSR-18.17.1

Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) (32 mm nominal bore) DSR-18.17.2

Providing and fixing ball valve (brass) of approved quality 22 complete. (High or low pressure with plastic floats). (15 mm nominal bore) DSR-18.18.1

Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. DSR-18.21.2.1

Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931 DSR-18.49.1

Providing and fixing 15 mm nominal bore C.P brass long nose 25 bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. DSR-18.50.1

Providing & fixing 15 mm nominal bore CP brass angle valve 26 for basin mixer and geyser points of approved quality conforming to IS 8931. DSR-18.53.1

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701 marked with 27 cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank. SOR

Please Enable Macros to View BoQ information