REPAIR TO JOINERIES DOOR WINDOWS AND OTHER MISC WORK IN TECHNICAL AND DOMESTIC AREA AT AF STN PURNEA UNDER AGE(I) AF PURNEA

Amount

Taking down of chowkhat or frame with shutter of size exc. 1.5 Sqm but n exc 4.00 sqm (without taking off shutters from the frame) complete all as specified and directed.

Taking down of chowkhat or frame with shutter of size n exc. 1.5 Sqm (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutter of size exc. 1 Sqm and not exc. 2 Sqm each complete all as specified and directed.

M&L for pressed steel frames of size (125 x 60) mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. Cold rolled mild steel sheet shall conform to IS 513. The size, type (profile) and dimensions of the frames shall be as indicated. Tolerance in the size of frames shall not vary by more than + 2 mm. The tolerance over the profile size shall be + 1 mm. Steel frames shall be of approved make.complete all as specified and as directed.

M&L for pressed steel frames of size (105 x 60) mm for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. Cold rolled mild steel sheet shall conform to IS 513. The size, type (profile) and dimensions of the frames shall be as indicated. Tolerance in the size of frames shall not vary by more than + 2 mm. The tolerance over the profile size shall be + 1 mm. Steel frames shall be of approved make.complete all as specified and as directed.

S&F 35mm thick of 2nd class HW in Plain, framed, panelled shutters chowkat (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F 35mm thick of 2nd class HW glazed and skeleton shutters in chowkats, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match commercial type on both sides complete all as specified and directed.

Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube. Fixing in opening as per specification and all as per drawing.complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, aluminium handles 2 Nos in each door, aluminium hinges, anodised aluminum snap beading, screws etc. complete all as specified and as directed.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Supply and fixing steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed.

Supply and fixing steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, specfication complete all as specified and as directed.

S&F 150mm size and aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 100mm size butt hinges, heavy weight, cold rolled mild steel to wooden or steel frame including necessary screw/bolt/welding complete all as specified and directed.

S&F 150mm size aluminium handles, cast type, anodised complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching drilling out old glazing pin /spring clip and providing and fixing complete all as specified and as directed.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty and securing pins not exceeding 0.50sqm each pane complete all as specified and as directed.

S&F Sheet glass 5.50mm thick, ordinary quality sheet glass is ground or obscured or frosted, on one side and glazing with oil putty in square n exc 0.5 sq. m in each pane,complete all as specified and as directed.

M&L for preparation of steel and iron surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as diretced.

S&F Clean sawn with butt joints softwood 2nd class 20 mm thick Boarding, supplied & fixed with nails in any situation Fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmet complete all as specified and as diretced.

S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as diretced.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and as diretced.

S&F 75 mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and as diretced.

S&F Continuous (piano) hinges of width 30mm, mild steel, bright finish or electro galvanised screw/ bolt / welding complete all as specified and as diretced.

S&F 75 mm size butt hinges, medium weight, cold rolled mild steel to wooden or steel frame including necessary screw/bolt/welding complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair door closer hydraulically regulated aluminium (extruded section body), designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F 150mm (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & diretced.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Resecuring or easing & adjusting shutters of any description n exc 1 sq. m each without taking down, also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles, if specially ordered, shall be paid for at 'supplied only' rates complete all as specified and as directed.

Resecuring or easing & Adjusting Shutters of any description but exc 1 sq. m and n exc 2 sq. m each with out taking down, also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles, if specially ordered, shall be paid for at 'supplied only' rates complete all as specified and as directed.

S&F in repair harrison curtain rails, 20 mm dia, anodised aluminium alloy, chromium plated with and including fixing brackets, stops, rollers etc., complete all as specified and as directed.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate for any type of door frame, complete all as specified and as diretced.

S&F in repair 150mm size and aluminium anodised, barrel tower bolts of extruded section complete all as specified and as diretced.

Taking down cement plaster of any description on concrete surfaces such as soffit of chajjas and brick walls etc including raking out joints, hacking for keys, scrubbing down with water and removal of rubbish off the premises complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

MSRAMANUJSINGHSONS

M/S SATISH KUMAR SINGH & SONS

M/s.Asha Enterprises

M/s. Mohan Enterprise

M/S ASOKE KUMAR MAJUMDER

Prahalad Rai

shashi bhushan gupta