PROVN OF GLAZED TILES IN TOILETS AT MILAN LINE, BICYCLE-CUM SCOOTER SHED AT KV-I, WATER PIPE LINE FOR WASHERMAN AND 02 TOILETS, UNDER THE AOR OF GE DEOLALI

Amount

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified..

Taking up or down steel tubing 15mm bore & connections S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all as specified & as directed in repairs complete all as specified.

S & F in repairs gratings 150 mm dia of PTMT with or without centre hole for waste pipe ( Minimum wt 25 gms ) complete all as specified.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastesincluding bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

S & F 32mm bore waste fittings, brass chromium plated with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S & F in repair 32mm dia PVC flush/waste pipe of polyethylene of low or high density or PVC for low level flushing cistern/basins/sink complete as specified and as directed.

S&F in repairs viterous china wash down water closet (pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as directed.

S & F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding etc complete all as specified and directed.

S&F in repairs 15mm bore fancy type bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed

S & F 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and directed

S & F in repairs chromium plated fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repairs 10 ltrs capacity PVC flushing cistern, low or high level, with inlet and outlet pipe, ball valve, syphonic action type, float and handle, pull or push type including brackets etc complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 450X 350X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed base (1:6) including rubbing and polishing complete all as specified.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed.

S & F 75mm PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed

M & L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in hard dense soil complete all as directed.

Removing excavated soil exc 250m but n exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as directed.

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

M&L hard core of gauge n exc 63mm, broken stone boulders deposited spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface broken stone or boulders.

M&L 100 mm thick PCC 1:4:8 type D-2 (40 mm graded aggregate) as in sub base finished even and rough to receive floor treatment with and inclusive of use and waste of formwork etc complete all as directed.

S&F Mild Steel of gde Fe 410-W as in plain plates cut to required sizes including forming holes without any attachement etc complete all as specified and directed.

M&L for mild steel work tubular pipes as in stanchions incl special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc complete all as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness , M-35 grade

M&L for 30mm thick sand bedding layer for concrete paver tiles laid to true line, level watered and mechanically compacted etc complete all as directed.

M&L for providing cement concrete Type B0 1:2:4 (12.50mm aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L preparation of newly steel surfaces exc 10cm width or girth and applying 2 coats of synthethic enamel paint over a coat of primer etc complete all as specified and directed.

Surface Excavation nexc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in soft/loose soil all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed.

Removing excavated material n, exc 50m and depositing where directed at a level n exc 1.5m from the base.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed.

M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation concrete etc complete all as specified and directed.

M&L RCC M-25 (Design Mix) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L RCC M-25 (Design Mix) Concrete as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and as directed.

M&L RCC M-25 (Design Mix) Beams, Cantilivers, bressummers, lintels over 1.5m span

M&L for fly ash brick sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) etc complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide etc complete all as specified and directed.

S&F 200 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed.

S&F 150 mm long extruded anodized aluminum alloy handles, fabricated type, etc complete and directed.

S & F 4.00 mm thick figured glass pin headed tupe fixed in ventillators etc complete all as directed.

S&F Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/round bars) with ends of bars shouldred and/or rivetted or forged into spikes for window grills/framed guard bars to the design and pattern of ornamental and intricate as approved etc complete all as speciified and drected.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Ditto but 6mm to 8mm dia complete all as specified and directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as directed.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions (iii) Apply two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .

M & L for glazed ceramic coloured joint free tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick with and including 10mm thick CM 1:6 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed.

M & L for Non - skid/Glossy finish/Matt finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exc. 0.06 sqm but n.exc 0.11 sqm, in floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.

M & L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as floor all as per direted

M&L PCC 1:2:4 type B1( 20mm agg), 40mm thick laid in slope of 1:20 and alternate bays incl finished even and smooth without using extra cement and joints in the plinth protection etc complete all as specified and directed.

M&L 10mm thick bedding layer in CM 1:4 on roof top surfaces mixed with integral WPC 2% by weight of cement and finishing the same even and smooth without using extra cement etc complete all as directed.

M & L for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth with a thin layer of sagol etc complete all as directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of primer over a coat of birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint etc complete all as directed.

M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling etc complete all as directed

M & L for 15 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls, or laid in floor etc complete all as specified and as directed.

All as per item above but 20mm bore pipe all as specified and as directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as directed

S&F 15mm bore bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed

S&F 15mm bore pillar taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed

S&F 15mm bore stop valves, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe with long shank and cup (concealed type) etc complete all as directed

S&F 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as directed.

S&F 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified.

S&F shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour. (Minimum weight 40 gms) etc complete all as specified and directed.

S&F fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as directed.

All as per item above but 110mm dia complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls etc complete all as directed.

All as per item above but 110mm dia

S&F 110 mm bore PVC (SWR) vent cowl etc complete all as directed.

S&F Cast iron Nahani trap with diameter of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed.

M&L for 1:4:8 type D-2 (40mm graded stone aggregate)Concrete bed to drain pipes including forming cradles against the sides of pipe after they are laid and tested for 150 mm bore of pipe etc complete all as specified and as directed.

Supply and lay Reinforced concrete pipes 150 mm bore of pipe class NP2 laid in trenches and jointed complete with collars etc complete all as specified and directed.

S & F glazed earthen ware viterous china squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) white coloured etc complete all as directed.

S&F viterious china urinal half stall type white (excluding flushing cistern and flush pipe and waste pipe) with and including brass chromium plated fancytype flush pin and 40 mm bore dia brass chromium dome type waste coupling etc complete all as directed.

S&F glazed earthen ware viterious china wash basin white coloured flat back size 550x400mm, outlet of 32mm bore HDPE outlet pipe with necessary fittings, 32mm bore brass CP waste couplings etc complete all as directed.

S & F PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed.

S&F Vitrous china white soap dish size 160mm160mm90mm fixed with screws and wooden/plastic cleats etc complete all as directed.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate )in benching to man holes and finishing of exposed surfaces of concrete etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (20mm graded stone aggregate) cast -in -situ as in copings including use and waste of formwork as required etc complete all as specified and directed.

M&L for precast concrete 1:2:4 type B-1 (using 20mm graded stone aggregate)in manholes covers set in CM 1:4 including necessary form work (Note :-Reinforcement will be measured and paid separately) including necessary form work etc complete all as specified and as directed.

S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1 etc complete all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed.

M & L 150mm dia pipe Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

Cutting existing CI/GI distribution main in position for taking out branch connection upto 200mm bore pipe by inserting Tee/Collar etc complete all as directed.

M&L Point wiring with two single core 1.5 sqmm (nominal area) size multitranded copper conductor cable and one single core 135 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly, 1100 volts grade, FRLS, PVC insulated sheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel shet duly galvanised and suitable for fixing modular type switches/ sockets/ regulators/ AC starters in and including cover plate etc. fixed in recess of wall with brass chromium plated screws and plated screws and cap washer complete for the following:

(a) One light point controlled by one switch

(b) One fan point (ceiling, wall and exhaust) controlled by one switch.

Modular ype switch, 1 way, 6 Amps, 1 Module

M&L lamp holder PVC cased body bakelite (white) back plate for batten fitting with LED lamp 10W

M/L for ceiling rose surface bakelite

Supply and fix exhaust fan, steel body AC single Phase. 230 V of size 300m sweep with, blades and frame and louvers

Supply and fixing LED tube lights fittings, 4 feet long 1 x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

M & L in repair sub main wiring with 2 single core, 4 sqmm PVC insulated unsheathed, multistranded copper conductor FR cable 1100 Volts grade including 4 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through conduit and connecting to common earth terminal complete all as spoecified and directed. Note: Two runs of copper cable and one run if earth wire including conduit shall be measured as one length.

Supply and fix sheet metal enclosure double door 4way DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed. Make : L&T/ Legrand/ Semens

S&F MCB SPN 6 to 40 Amps 240 Volt

S&F MCB SP 6 to 32 Amps 240 Volt

M/S R.K.S. CONSTRUCTION

BHUSHAN BHIMRAO PATIL

J Sams Contructions