Providing and fixing of 12....

Amount

Providing and fixing of 12.5 Mtr High mast, Mini High mast and park lights in ward no-5 at Zone-2 under limit of Municipal Corporation Gurugram

Supply and erection of 2.5 sqmm 3 core unard FRLS PVC insulated ISI Marked copper conductor cable complete as per entire satisfication of engineer in charge.Make RR / Havells / Polycab/Grandley. 2.5 Sq. mm 3 Core Cable.

Providing trench less boring below existing road / pavement including laying of 65 mm dia GI pipe B class required to complete the job in all respect

Restoring the road cut, in level with the existing road surface, including preparation of subgrade laying and relaying of soiling and laying and consolidation of wearing coats to water bound macadam specification and laying 20mm thick premix carpet, on top including cost of tack and sealcoat complete in all respects...

Providing trench less cuttting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road corssing of cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables..

Digging of pucca road in required width for laying of cable/pipe complete in all respect upto the entire satisfaction of Engineer-in-charge..

Casting, Laying and covering of Gap Base plate (Pole) between foundation suitable c.c. mixture and pole marking with yellow reflector stricker with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work..

Supply and Erection of Timer Contractor, DP, MCB mounted on Bakelite sheet and Installed in water proof CRCA Sheet 18 SWG duly painted with powder coated paint Box of Size 12``x15``x5`` duly lockable including Input and Out Put Connectors Bakelite/Porclein of 63A Rating and neccessary service cable up to 10 mtr complete with internal copper wiring and installing the same on pole/pedestal with suitable means at height desired by Engineer in charge to aviod theft upto entire satisfication of engineer incharge with following specification. Timer :-Quartz Analog 24 Hour Operation (G.E/LandT/Siemens/Indoasian/CandS) Contractor :- 3Pole 32A, 415Volt. (Schnider/LandT/Siemens/Indoasian/CandS) DPMCB :- 40A 2pole. (G.E/LandT/Siemens/Schnider/CandS)..

Operation and Maintenance of 1and2 year free of cost

Supply, Erection, testing and commissioning of 3 phase automatic timer AMSON`s / L and T make on/off the street lights on different fixed timing maintainable on street lights pedestal, pillar, wall M.S pedestal where on\off point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection on/off from bottom of the cabinet, 3 contractor 63 Amp, 24 volts D.C each transformer, rectifier system switching system, bakelite contractor 63 Amp, MCB 63 Amp LandT digital timer Auto/Manual system, time setter, fibber sheet, rubber and plastic component, wiring and component fitting, chemical (Epoxy) including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In -Charge of the work.

Casting and laying of making of foundation of 1:1.5:3 for foundation of size 0.4m x 0.4m x1.0m minimum 4 nos 12mm dia longitudinal MS reinforcement roads with rings of 40 nos 8mm dia.

Operation and Maintenance of 3rd year @6% of capital cost....

Operation and Maintenance of 4th year @7% of capital cost......

Supply and eraction of 9 meter long high mast IS, 2062 E250A single saction 3mm thick sheet GI sheet, top dia 150mm bottom dia 360mm hot dip galvanized thickness of galvanized 70 micron as per IS 2629 opening door at base 900x305mm closed, fitting, door with ALLEN KEY thickness and diameter of base plate 25 mm, 520mm, (O.D) IS 2062 E250A size of anchor plate and thickness 3 mm with uniform PCD of 460mm (IS 2062 E250A, no of arm 6nos. double drum type, permanent oil bath lubrication arrangment, 500kg loading capacity still core , 3 plus 2 nos. ropes , braking capicity load 1750 kg for core PVC insulatted 2.5 squre mm coper wire with 6nos foundation bolts length 850mm dia meter 24mm input supply 3 phase 415 balts and motor required as per capicity and Supply and erection of RCC foundation 1.5.3 of size 0.7 M x 0.7M × 1.8 M with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200 mm C.C. for fixing the High Mast with all labour and material required of complete in all respect ( design of high mast, bracket, light fiting as per attached drawing )

Supply and installation of a 3-meter decorative mild steel galvanized tubular pole with varying profiles. The bottom profile is 1000X114mm, and the top profile is 2000X60mm, with cast aluminum embellishment E3. The pole includes a window and fixed plate at the bottom. It is primer coated and painted. Fixture: Supply and installation of a 45 Watt Ornamental LED Post Top luminaire with an aluminium housing, powder coated/PU painted, and equipped with a clear/frosted PC/PM diffuser. The luminaire features a sturdy triple arm mount and high lumen LEDs on aluminum heat sinks. Complete in all respect as per approved design specifications.

Bidder Name

Amount

SANDEEP KUMAR CONTRACTOR (GSTN-06CFGPS4963H1ZI) BID ID -1329042

DHEERAJ ENTERPRISES (GSTN-06AAKFD3784C1ZI) BID ID -1329563

SANDEEP KUMAR CONTRACTOR (BID ID -1329042)

DHEERAJ ENTERPRISES (BID ID -1329563)