Providing, installation and commissioning of Electro-Mechanical Equipments and allied works for submersible pumping machinery of Pump House No.-I and II for Augumentation Tube Well and Arsenic Removal Plant in connection to Accommodate FHTC under

Amount

PART-A Supply delivery at site of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification : DISCHARGE : 42 cubic mtr./Hr. HEAD : 34 Mtr. *N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery. (B) Test Certificate of pump & motor should be submitted during delivery. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply delivery at site of 4 Sq. mm. 3 core, water proof flat copper cable. Materials should be supplied as per specification of NIT and as per direction of EIC. N.B:- Cable should be supplied as per site requirement.

Supply, Delivery and storage at site 1.1 KV Grade 50 mm2 3½ core XLPE insulated Cupper armoured Cable as per technical specification of NIT. (From Cut out to Bus-Bar Panel) )

Supply delivery at site of 1.1 Kv Grade 25 sq. mm. 4 core XLPE insulated Al .Ar. Armoured cable.(From Bus-Bar panel to V.S and V.S to MCC Panel) Materials should be supplied as per specification of NIT and as per direction of EIC. N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 1.1 Kv Grade 12 core, 2.5 Sq. mm. Armoured copper control cable . Materials should be supplied as per specification of NIT and as per direction of EIC. N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 200 Amp Kit-kat rewirable porcelain fuse unit (both base and bridge) Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply delivery at site of 100 Amp. TPN, 415V, main switch with rewireable type fuse link in sheet steel enclosure. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply delivery at site of 100 Amps.4 Pole off load change over switch. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply delivery at site of 200 Amp. 6 way, 415V, wall mounted Bus-Bar chamber having 6 nos copper Bus-Bar. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply & delivery at site 2 mm thick CRCAsheet steel enclosed type Indoor wall Mounted 415 V MCC cum PDB Panel having required Feeders wih PLC as per specification of NIT (7.5 HP to 12.5 HP) Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply and delivery at site of 80 mm dia 3 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply and delivery at site of 80 mm dia 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply and delivery at site of 80 mm dia CI top & bottom adopter Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply and delivery at site of Heavy type suitable dia MS suspension clamp along with nuts bolts and washer. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply and delivery at site of Three Phase actuator operated wafer type butterfly valve PN-1.0 rating of norminal dia 80 mm. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply and delivery at site of 80 mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90⁰ bend-2 nos. CI flanged tee- 1 no., CI flanged short piece -2nos ,flange etc. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply and delivery at site of Heavy type 300 mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry . Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply and delivery at site of Pressure gauge [Make- H. Guru/Febig] 102 mm. dia [0-7 kg/Sq.cm] brass cock and fitting complete [ This cost includes 15 mm. dia G.I. pipes and specials] Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply delivery at site of Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump [This cost includes 15 mm. dia G.I. pipes and specials. Materials should be supplied as per specification of NIT and as per direction of EIC.

Earthing and lighting protection for pump house and electrical installation as per ISS and IE rules and as per technical specification of NIT. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply delivery at site and storage of illumination arrangement like suitable size wire, switch ,switch board ,tube light fitting LED outdoor fixture complete as per specification of NIT. Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply & delivery at sites chair,table,Celing Fan,wooden board, Kiox Box . Materials should be supplied as per specification of NIT and as per direction of EIC.

Supply delivery at site and storage of suitable capacity Power Correction arrangement as per specification of NIT.(20 KVA) 250V to 500V

Installation of all items as mentioned in Sl.No.1 to 24 (Part-A) including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials, earthing arrangement of motors, starters, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation as per Hydraulic standard & IE rules in compliance with specification of NIT and upto entire satisfaction of EIC.

Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per NIT specifiaction & direction of EIC.

Testing & Commissioning of the entire installation i.e. Pumps, Motors,valves etc. as in PART A of (Sl no. 1 to 24) as per direction and to the entire satisfaction of E.I.C.

PART-B Supply, Delivery and storage at site of horizontal Split casing Centrifugal Pumping Machineries with baseplate, flexible coupling, coupling guard, foundation bolt etc. having the following specification and as per NIT. :(pumps suitable for PLC operated unmaned operation facility) (For pumping water from CWR to OHR) Discharge :- 86 m3 per hour Generated Head :- 52 MWC

Supply, Delivery and Storage at site horizontal foot mounted induction motor suitable for the pump duty mentioned above ( item No- 1) with adequate margin as specified in the NIT. Routine test certificate of Induction Motor has to be submitted during delivery

Supply, Delivery and storage at site of Monoblock vacuum Pumping Machinary with the following specification and as per NIT. : A) Vacuum : upto 600 mm of Hg B) Air Flow Rate :1.8 to 20.5 m3 / Hr

Supply, delivery and storage at site Lift Type 150 mm Foot valve combined with stainer as per IS : 4038 PN-0.6 and as per detail given in the NIT . :-N.B. : Test Certificate to be produced for each valve ( AT SUCTION SIDE OF PUMP )

Supply, delivery and storage at site of CI doble flanged single door swing check 125 mm dia N.R.V as per IS : 5312, Part-I, PN-1.0 and as per detail given in NIT. :-N.B. : Test Certificate to be produced for each valve. (AT DELIVERY SIDE OF PUMP)

Supply, delivery and storage at site 125 mm dia Cast Iron actuator operated wafer type butterfly valve generally conforming to IS:13095 and PN-1.0. and as per detail given in NIT. :-N.B. : Test Certificate to be produced for each valve (AT DELIVERY SIDE OF PUMP )

Supply, delivery and storage at site 125 mm dia double flanged Cast Iron manually operated non-rising spindle sluice valve generally conforming toIS:14846 PN-1.0.and as per detail given in NIT. :-N.B. : Test Certificate to be produced for each valve. (AT COMMON DELIVERY HEADER )

Supply, delivery and storage at site 80 mm dia Cast Iron kinetic double orifice air released valve as per relevant IS, PN-1.0.and as per detail given in NIT. :-N.B. : Test Certificate to be produced for each valve. (AT COMMON DELIVERY HEADER )

Supply, Delivery and Storage at site MS Dismantling Joint DN 125 mm PN 1.0 ( for Delivery side & common header of pump )

Supply, Delivery and Storage at site Bourdon type pressure & compound gauges, 150 mm dia cast Aluminium Dial with , SS internal, DN 15 GI impulse line with three way cock.

A)Pressure Guages (0 - 15 kg/cm2)

B)Compound Guages ( +1 to -1 KSCG)

Supply, Delivery and Storage at site of 150 mm dia , thickness 5.4mm and 125 mm dia 5.4 mm thick MS Black Pipe conforming to IS:3589 Gr.330 (For Suction, Delivery & Delivery Header) along with necessary Bends, fittings viz. flanges, bolts, nuts, gaskets , eccentric reducers 150 X 100 mm, concentric enlarger 80 X 125 mm etc. as reqd. to make the installation complete in all respect and as per NIT.

Supply delivery and storage at site of Ultrasonic/Radar type continuous level measuring unit with provision of 4 to 20 mA analogue signal, indicator and recorder for continuous level monitoring as well as 5 nos. relay out put for sensing high, low, low - low level in suction sump as per specification given in NIT.

Supply, Delivery and Storage at site 20 mm dia, G.I Pipes(medium duty),water storage pvc tank , Bends,sockets, Tees,fittings, and other specials,gaskets , solenoide valve ,gate valve for auto & manual operation etc. as reqd. to make the piping arrangement of vacuum pump complete in all respect as per NIT. (For priming arrangement)

Supply, Delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type Indoor Floor Mounted 415 Volt MCC Panel having required Feeders with PLC as per specification given in NIT.

Supply, Delivery and storage at site 1.1 KV Grade 70 mm2 3½ core XLPE insulated Aluminiun armoured Cable as per technical specification of NIT. (From Bus-Bar panel to MCC Panel)

Supply, Delivery and storage at site 3 core 1.1 KV Grade 10 Sq. mm. 3 core XLPE insulated Aluminiun armoured Cable as per technical specification of NIT. (For MCC Panel to motor. )

Supply, Delivery and storage at site 1.1 KV Grade 2.5 Sq. mm. 12 core pvc insulated Copper control Cable as per technical specification of NIT. (For MCC Panel to actuator. )

Supply, Delivery and storage at site 1.1 KV Grade 2.5 Sq. mm. 2 core pvc insulated Copper control Cable as per technical specification of NIT.(For solenoid valve connection)

Supply, Delivery and storage at site 1.1 KV Grade 4 Sq. mm. 2 core pvc insulated Copper Cable as per technical specification of NIT.(For vaccume pump connection)

Supply, Delivery and storage at site 1.1 KV Grade 35 mm2 3½ core XLPE insulated Aluminiun armoured Cable as per technical specification of NIT. (From Main power to V.S to MCC Panel)

Earthing & lightning protection for Pump house and electrical installation as per ISS and IE rules and as per technical specification of NIT. (Earth pit 2 nos + 2 L/A)

Supply, delivery at site and storeage of GI perforated cable tray at Pump house for laying of incoming & outgoing power and control cables to and from MCC Panel having proper M.S. structural support as per NIT specification and direction of EIC.

Supply delivery at site and storage of illumination arrangement like suitable size wire, switch ,switch board ,tube light fitting ,exhaust fan ,ceilling fan , LED outdoor fixture complete as per specification of NIT.

Supply delivery at site and storage of safety equipment like suitable capacity Fire Extinguisher , sand bucket ,fire bracket, rubber mats, shock treatment chart and first aid box,chair ,table ,415 volt danger board complete as per specification of NIT.

Supply delivery at site and storage of suitable capacity Power Correction arrangement as per specification of NIT.(40 KVA) 250V to 500V

Supply delivery at site and storage of Disinfection arrangement (Hydraulic Diaphragm )with Flow rate 100 LPH as per specification of NIT.

Installation of all items as mentioned in Sl.No.28 to 55 (Part-B) including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials, earthing arrangement of motors, starters, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation including making slope of floor and arrangement of removing gland leckage water as per Hydraulic standard & IE rules in compliance with specification of NIT and upto entire satisfaction of EIC.

Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per NIT specifiaction & direction of EIC.

Testing & Commissioning of the entire installation i.e. Pumps, Motors,valves etc. as in PART A (Sl no. 28 to 53) as per direction and to the entire satisfaction of E.I.C.

Operation and maintenance of the entire installation in High lift pumping stations on 24 hrs. basis including guarding for a period of 90 days are to be provided with supply of skilled, semi-skilled and un-skilled personnel including watch and ward personnel from the date of commissioning. During maintenance period supply of all consumable materials sundrys and lubricants are to be supplied. Charges of Electrical energy during maintenance period will be born by the Department.

Supervision charges for electrical installation by licensed electrician as per IE Rules, 1956 read with latest amendments with overhead expenditures. .

Add: GST @ 18%

Add: LW Cess @ 1%

KARTICK BAL

C M S ENGINEERING CONCERN