Renovation work related to Wooden and AL hatchway at 60A

Amount

Renovation work related to Wooden & AL hatchway at 60A Servant Quarters at Kasturba Hospital.

Providing & fixing in position single leaf flush door of required sizefor internal doors of residential units, shutters madeof 45mm thickmarine grade block board core with 25mm x 45mm T.W. lippingpatti, 1mm thick approved decorative laminates finish on both faces ofshutter, including providing & fixing T.W. frame of 60mm x 150mm size,coating all the exposed surfaces of wood with 2 coats of flat enamel paint of approved shade & make over one coat of approvedsynthetic primer, coating all the surfaces of wood in contact withmasonary with Tar (Black Japan), preparing the surfaces, providing and fixing brass chrome finished or S.S. fittings and fastenings etc complete as per detailed drawing no. WD-26 & as directed by the Engineer in charge.D5,D7,D12,D8,D9,GL-D5

Dismantling doors, windows, fanlight and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Providing anti termite treatment conforming to IS- 6313 (part-III) to the wooden frames of doors / windows of the Existing building by drilling the 3 mm dia. holes at 150mm c/c and at the junction of wood work and masonry work to downward angle of 45 degree and injecting 500 ml per hole or until refusal with oil / kerosene based chloropyrifos EC 20 emulsion or equivalent of 1% concentrate, sealing the holes by filling the putty etc complete as directed by Engineer-In-Charge with 2 years guaranty

Providing anti termite treatment conforming to IS- 6313 (part-III ) to the joints of wooden frames of beams/ joists used for the roof work of the Existing building by drilling the 3 mm dia holes at the four corners at downward angle of 45 degree at the junction of wood work and masonry work and injecting 500ml or until refusal per hole with oil / kerosene based chloropyrifos EC 20 emulsion or equivalent of 1% concentrate, sealing the hole by filling the putty etc complete as directed by Engineer-In-Charge with 2 years guaranty.

Providing and applying two coats of an approved wood preservative for anti-termite treatment to wooden surface as per manufacturer’s specifications and as directed by Engineer-In- Charge.

Providing and fixing in position alluminum door fully panelled with 6mm thick Novapan BSL and made up of extruded and anodised aluminium sections of approved make and of size 63.5 mm x 38.10 mm x 2.0 mm thk, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881kg./Rm) for outer frame, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881 kg/Rm) for top rail, 95.25 mm x 25.40 mm x 2.0 mm thk (wt. 1.519 kg/Rm) for bottom rail, 25.0 mm x 44.45 mm x 2.40 mm thk (wt. 0.918 kg/Rm) for lock rail, 47.62 mm x 44.45 mm x 1.88 mm thk (wt. 0.943 kg/Rm) for vertical shutter (hinge side), 47.52 mm x 44.45 mm x 1.95 mm thk (wt. 0.936 kg/Rm) for vertical shutter (latch side), clip weighing 0.097/kg/Rm., including neoprene gasket, fixtures, fastenings and accesories like hinges, locking arrangement, door closer etc. complete as directed by Engineer In Charge.

SHREE HERAMB CORPORATION (BID ID -6473104)

M/S AMI IMPEX (BID ID -6464905)