Providing Compound wall (Except west side) 4 Nos. of Bath, Toilet and Sentry room for the Construction of Fire and Rescue Service Station with development works at Veppadai in Namakkal District.

Earth work excavation for foundation in all soils (including refilling) a) 0 to 2m depth.

Earth work excavation for Open Foundation (Excluding Refilling).(Drain having bed width upto 1.25 metre) a) 0 to 2m depth.

Providing Pre-Constructional Antitermite treatment

Supplying and filling in foundation and basement with filling crushed stone sand

Supplying and laying of Hard core layer 300mm consolidated thickness.

Supply and filling in foundation and basement with gravel in layers of 150mm thickness well watered, rammed and consolidated complying with relevant standard specification including cost of gravel etc., all complete and as directed by departmental officer.

Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly

Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick a) In Foundation and Basement

Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

Providing and laying in position, Standardised Concrete Mix M-20 Grade (Using crushed stone sand) a) In Foundation and Basement

b. In Ground Floor

Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement .

Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm a. In Ground Floor

Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm a. In Foundation and Basement

b. In Ground Floor

Supplying and fixing of 20mm thick bituminous expansion joint filler pad of approved quality and make

Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

Supplying and fixing of ornamental clay designer suitable for sloped roof with base mortar in cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick (Pressed Tiles)

Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

Supplying and fixing of Colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

Supplying and fixing of Ivory colour Vitrified Tiles of size 60 cm x 60cm x 8cm for flooring and other similar works (Best approved quality, colour and shade and the same shall be got approved from the Executive Engineer before use) over cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

Providing Form work and centering for reinforced cement concrete works a. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c.For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors for elevation purposes, scaffolding, curing, finishing etc., all complete. a) 150mm wide border

b) 75mm wide border

Stucco Plastering 12mm thick using hard broken stone chips of size 10mm and below using 86.50 kgs of cement and 0.15 m³ blue metal chips for every 10m² area over the existing plastered surface including curing etc., complete complying with relevant standard specifications and as directed by the departmental officers.

White washing three coats using clean shell lime slaked

Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

Supplying and fixing UPVC door frame with shutter

supplying and fixing UPVC (un plasticized polyvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm

Supplying and fixing Mild Steel grills as per the design approved

Supply, delivery and fixing of 0.47mm Bare Galvanium sheet roof of approved quality with necessary J bolts with bitemen and GI washers including cost of Errection, Fasteners, Transportation charges and all other labour charges etc., all complete and as directed by the deprtmental offcers.

Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

c) 20mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

Supplying and fixing of half turn C.P Long body Tap of 15mm dia

Supplying and fixing of half turn C.P short body Tap of 15mm dia

Supplying, laying and jointing the following dia PVC pipes below ground level including cutting, threading, the pipes wherever necessary and jointing with Teflon tape including earth work for laying the pipes and refilling the trenches after the pipes laid underground and conveying the pipes and specials lowering into trenches and laying to proper gradient etc complete in all respects. a. 40mm dia OD PVC pipe 10 Kg/Sqm.

Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) (a) In Ground floor

Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.

Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety etc., all complete and as directed by the departmental officers. a) 9 watts LED bulb

b) 15 watts LED bulb for bulk head

Supplying and fixing of water tight Bulk head fitting suitable for 12W LED bulb with guard

Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (Excluding cost of fan)

Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48" Electric fan 1200mm sweep

Supplying and fixing 15 Amps 3 pin plug type socket with switch

Wiring with 1.5 sq.mm copper PVC insulated unsheathed single 1.1 KV grade core / cable with continuous earth by means of 1.5 sq.mm copper (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose

Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990 (Open wiring)

Supplying and fixing of Aluminium Towel Rail of 75cm long

Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type

Please Enable Macros to View BoQ information