PAR.... Improvement to operational efficiency of Tudal pumping.....

Amount

Improvement to operational efficiency of Tudal Pumping station by providing inter compatibility of existing system.

Dismantling of old damaged, rusted manifolds / foundations, MS supports / delivery sides various valves by removing anchored with MS plate stiffeners from floor including necessary lifting tools, plants, machinery, labour, safety equipment‘s for required clearing the site to complete & stacking to a suitable place within 100 m lead etc clearing the site complete.

Supplying, loading, transporting on site, unloading DI Glandless Sluice valves of PN 1.0 with appurtenances and flange adapters, nuts, bolts, washers, packings etc. stacking the same as directed on site for following diameters. (Manually operated). The flange adapter used here conforms to C-219. Note : sluice valves, flange adapters and all other materials.

DN 150 DI Glandless Sluice Valve PN1.6

Providing, Erecting and commissioning, transporting on site, unloading DI double flanged, tilting type, resilient seated Check Valve with PN16 rating as per detailed specification.

DN 150 DI Check Valve PN1.6

Providing, Erecting electrical valve actuator totally enclosed weather-proof and dust proof construction with IP-68 protection class suitable for installation in any position without lubrication, leakage or other operational difficulties with handwheel for emergency manual operation which will automatically disengage on restoration of power to motor and including all material tools and plants laobors etc. with "Electromechanically" unit suitable for operation of AC 50Hz, 3Phase supply.

For DN 150 DI Glandless Sluice Valve PN1.6

Providing Supplying, erecting, testing and commissioning worm/spur gear box assembly for valves including suitable operation rod with provision for manual operation complete as per detailed specification all consumable materials and nut bolts for 100mm to 450mm.

For DN 150 DI Glandless Sluice Valve PN1.6

Providing, Supplying, Erecting, testing and commissioning of control panel unit per actuator including providing, fabricating out of SCRCA sheet 16 Gauges. All control switchgears approved make suitable size contactors, switches, fuses, pushbutton, including lamps complete including providing wiring with required cupper wires 1100 Volts grade for power and control wiring complete including providing applying painting with Oven baked powder coating including erection with necessary foundation.

Providing, Supplying, Erecting and commissioning of STQC certified AHMS System for operational hours monitoring, Torque condition monitoring, Motor health monitoring also included with local and remote monitoring system for planning of preventive maintenance.

Copper conductor PVC insulated, armoured control cable

2.5 sq mm Copper conductor PVC insulated, armoured control cable

CB 7-2-10) 12 core 2.5 sq mm

Cable Tray (CB-CT)

Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

C.C. Foundation

Making Cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Providing MS Slipon flanges at departmental store or work site finished smoothy on one side including drilling of holes as per B.S. Table or IS: 1537-1976 including cost of MS Plates.

150 mm dia. - 12mm thk - 7 Kg

100 mm dia. - 12mm thk - 6 Kg

Plate, Pipe type Earthing (EA-EP)

Supply, installing, and testing of maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF

Providing at departmental store or worksite fabricated MS Pipe and Special with socket and Spigot ends for plain ends with necessary longitudinal and circumferential joints with required number of welding runs including cost of plates, welding rods & all kind of duties except octroi including loading unloading and transportation etc. complete

MS pipes & Specials without plain ends.

Centrifugal Coupled Pump set -- Erection charges Erecting and giving test of centrifugal coupled pump set with foot mounted motor excluding base plate coupling and foundation bolts, etc. on provided concrete foundation / RSJ with accurate levelling with shims and proper alignment.

LT Cables (Copper) (CB-LT/CU)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Accessories

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.

LT - MCCBs (SW-MCCB)

Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB

Accessories

Supplying, erecting, testing & commissioning 525 V 3 phase, 50 Hz., APP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of all polypropylene condensers (APP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

Pure Water Pump house

Pressure Transmitter Designing, Supplying, Installing, commissioning & testing of pressure transmitter CE marked with following technical parameters at Raw Water Pump House and Interfacing with PLC panel including Mounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/- 0.1 % of full scale or better Enclosure- IP 68.

Rebate for old dismantled materials from site.

Elink Software technologies Pvt Ltd. (BID ID -6594280)

Kevla Engineering (BID ID -6592644)