REPAIR TO CHAJJA, ROOF PROJECTION, FACIA, PLINTH PROTECTION, PLASTERING ETC IN DUTTA, JJ, BHARGAVA, NAIDU, OLD GUPTA, NEW GUPTA AND RODRIGEOUS COLONY IN DOMESTIC AREA AT AIR FORCE STN UTARLAI

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

M&L for rendering 10mm thick on fair faces of concrete surfaces, stone masonry or brickwork/PCC block in cement mortar 1:6 on wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on fair faces of brick work/ concrete surfaces PCC block in CM(1:4) finished even and smooth with out using extra cement complete all as specified.

M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 on ceiling or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.

M/L for prepration of newly plastered external surfaces of wall Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces in Berger/Apex in Asian /Nerolac anti fungal emulsion paint of approved brand and shade over one coat of alkali primer all as per manufacturs instructions incl necessary scaffolding incl writing letters etc complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) all as specified.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection finished concrete surfaces even and smooth without using extra cement complete as specified.

M&L 50mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finished even & smooth using extra cement for floor finish all as spd.

M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M & L for preperation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3. complete all as specified and directed

M&L for machine made rubber moulded precast coloured interlocking tiles of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thick M 35 grade laid, jointed complete all as specified

M & L for cement concrete type B1 1:2:4 (20mm graded aggregate) as in kerb, rounded and chamfered on edges etc complete all as specified and directed at site

M& L for chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying rust remover in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with Nitozinc primer to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.00M height)

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge.(Note : The work shall be carried out upto 12.00 M height and reinforcement bar shall also used as column/beam jacketing or other places as directed )

M&L for driiling holes with 10 mm to 20mm dia and 75 to 100mm deep as required and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with two component polyester resin anchoring grout (two pack system consist of 1 part of resin and 2 hardner part) hole @ 150gm per holes with all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. Note : 1.reinforcement shall be paid and measured separately. 2. The work shall be carried out through upto 12m height

M & L for 15mm to 20 mm thick cement plaster CM 1:3 with added integral waterproofing compound @ 100ml/per 50kg cement bag. Each layer thickness not exceeding 20 mm complete all as specified and directed by engr-in-charge. IWC should conforms to IS 2645-2003 and available with ISI standard Mark including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.00M height)

M & L for perparation the surface and applying 20 to 30 mm thick in layers , each layer n.exc 20mm thick with polymer modifed mortar (PMM) on sufcace of slab/columns/beams/chajjas/ parapet /roof projection/balcony/staircase with Renderoc chemicals including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.00M height)

M & L for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of Nitobond SBR as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc., including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.00M height)

Dismantlies of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L for 20cm thick precast cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate block masonry with solid block, exc 10 cm in width & set in CM 1:6 all as specified & as directed.

Dismantling of cast iron or RCC pipe of 75 mm bore, set in cement mortar including fittings complete all as specified and directed..

Dismantling of cast iron or RCC pipe of 100 mm bore, set in cement mortar including fittings complete all as specified and directed..

S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer-inCharge.

S&F cast iron soil, waste and vent pipes of 100 mm bore in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer-inCharge.

S&F in repair oval accees door for 75mm dia CI bend/Tee etc fixed with bolt and gasket complete all as specified and directed by Engineer-inCharge.

All as per Ser item No 25 here-in-before but 100mm dia CI Bend/Tee etc fixed with bolt and gasket complete all as specified and directed by Engineer-inCharge.

Hacking out old broken glass any thickness size, quality or description from wooden frame/metal frame glazed with puty or fixed with beads complete all as specified and directed..

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F sheet glass 3mm thick ground or obscured or frosted or pin headed type , on one side & glazing with oil putty in square/ rectangular n.exc 0.5 Sqm in each pane complete all as specified.

M&L for one coat of synthetic enamel paint on old wood or wooden based surfaces of any description over 10cm width or girth including preparation surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparatin of old painted steel surfaces complete all as specified and directed.

M & L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, flat iron fillets including all necessary drilling, bolting, welding or riveting, etc, and similar work conforming to Fe-290 Gde E-165 including dismantling old complete all asspecified and directed by Engineer-In-charge.

M&L for providing precast cement concrete cylindrical shape balusters for railing 1:2:4 Type B-0 (12.5 mm graded aggregate), 75 mm dia thick (measured larger portion),fixed at 200 mm Centre to centre spacing including all mouldings and fixed in 35mm thick RCC jali as required in Cement mortar 1:2 including taking down old railing, if required complete all as specified and directed.

M & L for 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet with curved at one end of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, as in sunsheds, chajjas , fixed with self tapping screws including taking down old sheets complete all as specified and directed.

M&L for mirror polished machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) including dismantling of stone slab complete all as specified and as directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC(SWR) bends 110 mm bore of any radius complete all as specified and directed.

M&L For complete removal of existing treatment and finishing the surface of wall including preparation of old plastered surfaces of walls and applying one coats to achieve even shande and colour of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming two coats of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces and application by hand with painting brush/roller complete all as specified and directed. Note:-The Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent.

Cutting down Vegetation growths like plants/trees of girth n.exc 15cm from roof tops/sides, external walls of bldgs, Chajjas, wall junctions at junctions of rain water/ CI waste water pipe junctions including removal of roots and taking out carefully possible quantity of concrete in roofs embedded in walls/slab surfaces including repairing the GI/ CI/ PVC pipe joints of that affected locations and applying TUFALO chemical (herbal rnedicine) to arrest further growth and making good the distrubed surfaces with PCC (1:2:4) type B-1 or CM 1:2 or brick work in CM 1:4 and plastering with CM 1:4 and treating tthe surfaces to match with the adjoining surfaces all as specified and directed by the . Note :- (i) The unit rate quoted shall be deemed to include the cost of scafolding/staging etc. (ii) Any CI/AC/PVC special damaged during work shall be replaced by new one to ensure leak/seapage free joint unit rate quoted shall deemed to be include cost of replacement of specials.

M&L for existing plastered/unplaster surface of wall and applying one coat of water proofing paint new grade -603 (as per manufacturing instruction) complete all as specified and directed by Engr-in-charge.

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3297046)