NIT NO. 08 ITEM NO. 25

Supply of Horizontal split casing Pump suitable for clear Water having 144 m3/hr discharge at 40 Meters head, min. 1460 rpm, the pump should be fitted with CI impeller, CI casing and EN8 shaft & efficiency shall be 80±2%. Make: - Kirloskar/M&P/Beacon/Jyoti/DJB approved.

Supply of sluice valve, non-rising with SS spindle flanged ends of size 100mm PN 1.0. Make: Kirloskar/ IVC/Marck/ Jupiter/ VAG/ Dorot/ Skope/ DJB approved

Supply of C.I. NRV without bye pass swing type flanged ends of size 100 mm PN 1.0. Make: Kirloskar/ IVC/ Marck/ Jupiter/ VAG/ Dorot/ Skope/ DJB approved

Supply of foot valve 150 mm dia. Make Kirloskar/ IVC/ Marck/ Jupiter/ VAG/ Dorot/ Skope/ DJB approved

S/O 150 mm dia size MS Black pipe medium B class Make of pipe: - Jindal/ Tata/ Approved

S/o Nut bolts with washers of good quality.

Supply of 50% neoprene rubber packing of suitable size as per site requirement. Make: Jyoti/ Worth/ DJB approved

Supply of complete Tyre coupling TC/N/014 or equivalent. Make: Unique/ Fenner/ Samrat/ Approved by DJB

Supply of PVC insulated aluminium armoured cable 35 sq.mm having 4 cores. Make-Havells Grandlay/ Gloster/ Kalinga/ Finolex/ DJB approved

Supply of manually operated Star-Delta Oil immersed Starter with double contact, three phase ,50 Hz, 41-60 HP rating, Oil tank capacity minimum 10 ltrs.Make:- Bentex/ Advance/ Havells/ L&T/ Capital/ DJB approved

Supply of transformer oil for starter

S/O Pressure Gauge having dial size of 100 mm dia. with all accessories of pressure gauge socket, bush etc. per site requirement. Make: - H. Guru/ Fibeig/ DJB approved

Supply of PVC cylindrical vertical water tank heavy duty of 500 ltr, capacity. Make: - Sintex/ Jindal/ Ganga/ ISI mark/ DJB approved

Disconnection of Electric connections of motor from panel to starter and motor after dismantling of old starter & associated cables with the help of manual labour, tools and tackles as required at site taking all safety measures.

Decoupling the pump and motor after removing the tyre coupling by opening of the nuts, bolts etc. The job includes dismantling of suction and delivery side sluice valve, NRV, taper, bends etc. as per site requirement and then taking them to a suitable place in the pump house.

Dismantling the pump set from the MS Base frame by cutting of nut & bolts with the help of gas cutter, tools & heavy labour as required at site and taking outside pump house.

Dismantling of MS base frame from CC foundation by cutting of foundation bolts with the help of gas cutter and taking out with the help of heavy manual labour & taking all safety measures as required at site.

Modification of existing base frame suitable for pump set with the help of welding work & material as required after that making of cement concrete foundation suitable for the P/set with all material like cement, concrete, sand, etc. i/c supply and grouting of foundation bolts vibrating pads etc. as required.

Dismantling of old damage line, valve, bend, pipes, and specials by manual labour, taking all safety measures and arrangement with proper welding, alignment, tightening the nut bolts, fixing of the packing sheet, making the joint leak proof.

Making of suction lines with the help of welding work and cutting of M.S. pipe as per site requirement & also provide and weld M.S. Flange with the pipe, gas cutting arrangement as required and after that lowering of suction line with the help of manual labour by taking all safety guidelines as per instruction of Engineer in Charge

Renovation of charging system by repairing/ replacement of worn out sleeve, fixing bearings, studs, gland plate of charging pump and other specials like gate valves, Tee, bend, elbows water tank etc. as per site requirement. The job includes refurbishment of charging motor.

Re- assembling of suction line & piping specials including bend of suitable size with welding and civil work as required at site. The job includes opening and closing of in-take UGR inlet valve with the help of manual labour. After completion of welding work testing of suction lines by operating pump sets first at no load & then at full load.

Installation of motor-pump set (motor will be provided by department), providing & fixing of coupling set after making bore as required, providing & fixing of coupling guard and other E&M equipment along with all piping work & providing and fixing of specials like Bends, Tee, reducer, flanges, pressure gauge etc. as required at site & fixing of valves, and executing all allied E&M and civil work, laying of cable as per site requirement, making connection using Aluminium armoured cable with end terminations made from copper cable of suitable rating, using thimbles with panel board by taking all safety precautions, arranging all tools and tackles including grinder, welding machine, gas cutter etc. as per site requirement.

Making and Supply of M.S. cover made out of M.S. Angle 40mm X 40mm X 5 mm with centre supporting angle and top side cover with M. S. chequered sheet minimum 3mm thickness duly welded with opening arrangement with heavy duty single hinges with handle. The size of UGR cover = minimum (2.5x2.5) sq feet

Dismantling the old damaged UGR cover at site and fixing new cover including civil work with the help manual labour& making use of cutting machine and filling with cement and concrete and shuttering material along with labour, tool and tackles etc. as required at site. The job includes painting of UGR cover with 1 coat of red-oxide primer and 2 coats of enamel paint.

Renovation of three phase electrical Supply system by providing/ fixing of four pole changeover switch 200 Amp in SS enclosure (1 No.), MCCB 200 Amp (1 No.), MCCB 100 Amp (2 Nos.), MCB 63 Amp (1 No.) volt meter -02 Nos., ampere meter- 2 Nos., LED indicating lights- 03 nos., porcelain re- wirable Kit Kat fuse (200 Amp) including all suitable accessories and wiring and making interconnections with copper cable as per site requirement in the panel. Make of Switchgear: L&T/ Schneider/ Havells/ HPL/ Standard/ Bentex/ DJB approved Meters: - L&T / AE / Schneider/ Trinity / Sigma/ DJB approved Indicating Light: - L&T/ BCH / Schneider/ DJB approved

Testing & commissioning of motor P/sets i/c above all E&M equipment first at on No-load and then on full-load condition to the satisfaction of engineer-in-charge

Transportation charges for to and fro of men and material including loading and unloading, shifting of old material from site to a suitable place as directed by engineer-in-charge.

Super System Engineers

Raj Engineering Co.

SONI SALES and SERVICE

paramount systems

Gupta Brothers

M/S CHAITANYA CONSTRUCTION CO.

PARTH SHARMA