CEPCKUNDAH04202122

Special repair works

Earth work excavation in all types of soil for leveling the undulated area with a head load lead of 100m over an initial lead of 10m and lift of 2m for filling as directed by the Engineer in charge including all labour charges , lead, lift, T&Ps etc., complete.

Earth work excavation for foundation and depositing on bank with initial lead of 10m & initial lift of 2m as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete. In all types of soils such as earth, SDR, medium rock, dense medium rock not requiring blasting.

Earth work excavation for foundation and depositing on bank with initial lead of 10m & initial lift of 2m as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete.Removing hard rock by wedging, chiseling and trimming to proper shape where blasting is prohibited.

Providing anti- termite treatment (Pre-Construction) for the Foundation and Ground floor of the Building as per IS 6313 (Part II) including cost of all materials, labour charges, lead, lift, T&Ps etc., complete.

Supply and filling M sand well watered and consolidated in foundation and basement in layers complying with standard specification as directed by the Engineer in charge including cost of all materials, all labour charges, lead, lift, T&Ps etc., complete.

Supply and filling with Gravel from borrow pits in layers for Basement well watered and consolidated complying with standard specification as directed by the Engineer in charge including cost of all materials, all labour charges, lead, lift, T&Ps etc., complete.

Providing P.C.C. 1:4:8 using 40mm HBG metal for foundation and Basement as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, laed, lift etc., complete.

Providing R.C.C. M20 GRADE for footings using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement. For Footing

Providing R.C.C. M20 GRADE for Plinth Beam using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement. For Plinth Beam

Providing R.C.C. Columns in M20 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.Footing top to Ground level.

Providing R.C.C. Columns in M20 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.In staircase headroom above roof level.

Refilling with excavated earth well-watered and consolidated in layers of not more than 150mm thick in foundation and basement as directed by the Engineer in charge including all labour charges, lead, lift, T&Ps etc., complete.

Providing R.C.C. Beams and Lintels in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m3 and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.In ground floor up to Ist Floor slab.

Providing R.C.C. Beams and Lintels in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m3 and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement. FOR HEAD ROOM ROOF LEVEL BEAM.

Providing R.C.C. Floor/Roof slab, Waist slab, Landing and steps in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.Ground Floor.

Providing R.C.C. Floor/Roof slab, Waist slab, Landing and steps in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.Head Room & Water Tank.

Providing R.C.C. Sill Slab M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.

Providing R.C.C. Sunshade, Loft and Cooking platform in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 and using anti-corrosive admixture ‘CONCARE’ or equivalent as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement. In ground floor up to 1st floor slab.

Providing R.C.C. Sunshade, Loft and Cooking platform in M25 GRADE using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m³ and maximum water-cement ratio of 0.5 and using anti-corrosive admixture ‘CONCARE’ or equivalent as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement. Above 1st floor slab up to Staircase Head Room.

Providing R.C.C. M25 GRADE Precast slab using 12mm to 20mm graded HBG metal with minimum cement content of 300kg/m3 and maximum water-cement ratio of 0.5 as directed by the Engineer in charge including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.

Providing and laying one layer of polythene sheet of 50microns over wall and below roof slab including cost of all materials, labour, lead, lift etc., complete.

Providing steel reinforcement for all RCC works including cutting, bending, binding, tying and placing in position including cost of steel, galvanized binding wire, lead, lift and etc., complete as directed by the Engineer in charge at site using.High strength deformed TMT Bars having characteristic strength of Fe500 N/mm² of ‘TATA’ or ‘SAIL’ make or equivalent

Brick work in CM 1:5 using chamber burnt Bricks of size 23x11x7cm with minimum compressive strength of 75kg/cm² for basement and super structure as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete . Basement and Ground Floor.

Brick work in CM 1:5 using chamber burnt Bricks of size 23x11x7cm with minimum compressive strength of 75kg/cm² for basement and super structure as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete . Above 1st slab upto 2nd Floor slab.

Providing Damp Proof course in Cement Mortar 1:4, 12mm thick using water proofing compound of approved make @2% by weight of cement finished with bitumen top as directed by the Engineer in charge including cost of scaffolding, all materials, labour charges, curing, lead, lift etc complete.

Supply and fixing chicken mesh 10mmx10mm of 20G over junction of Brick work with reinforced concrete columns, beams etc., Mesh shall have a minimum lap of 75mm on either side of the joint, and shall be fixed to brick work/concrete before plastering as directed by the Engineer in charge including cost of all materials, labour charges, curing, lead, lift, T&P etc., complete.

Providing floor finish with vitrified tiles of size 600x600x8mm of approved make, colour and pattern over 10mm thick Cement mortar 1:3 bedding and pointing with same coloured cement in all floors as directed by the Enginer incharge at site including cutting chase in walls wherever required, cost of all materials labour charges lead, lift, curing T&P etc., complete.

Providing floor finish with anti-skid tiles of approved make, colour and quality and of size 300x300x6mm over 10mm thick Cement mortar 1:3 bedding and pointing with same coloured cement in all floors for Bath and Toilet cutting chase in walls wherever required, cost of all materials labour charges lead, lift, curing T&P etc., complete.

Providing floor finish 25mm thick Granolithic floor finish in mix 1:1:2 (one part of cement, one part of sand & two part of chips) using chips of grade 10 mm and below for portico floor as directed by the Engineer in charge including cost of all materials, labour charges, lead, lift, curing, T&P etc., complete.

Dadooing the walls with Joint free ceramic tiles of approved make, colour, pattern, quality and size over 10mm thick CM 1:3 bedding and pointing with same coloured cement in all floors for Bath, toilet for a height of 2.40m and above kitchen platform as directed by the Enginer incharge at site including cutting chase in walls wherever required, finishing neat cost of all materials, labour, lead, lift, curing etc., complete.

Skirting with vitrified ceramic tiles of approved make, colour, pattern, quality with 8mm thick over 10mm thick Cement mortar 1:3 bedding for required height and pointing with same coloured cement in all floors for cutting chase in walls wherever required as directed by the Enginer incharge at site including cost of all materials labour charges lead, lift, curing T&P and etc., complete.

Plastering in CM 1:3, 10mm thick for all ceiling surfaces, Sunshades, Lofts, bottom of waist slab etc., including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete.

Plastering in CM 1:5, 12mm thick for exterior surfaces of all walls including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete.

Plastering in CM 1:5, 12mm thick for interior surfaces of all walls including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete.

Floor finishing in CM 1:3, 12mm thick for top of waist slab, steps etc., including cost of all materials, labour charges, lead, lift, curing, etc, complete.

Plastering in CM 1:3, 20mm thick with water proof admixture of approved make and quality and bitumen paint wherever required and as directed by the Engineer in charge for inside and outside surfaces of water tank including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P, etc., complete.

Supply and fixing in position Flush Doors of required size with CRCA pressed steel Box section 18G or 1.25mm thick for Door frames of size 105x60mm, with single leaf factory made Solid core Flush shutters with commercial ply on both side with teak wood lipping alround 35 mm thick with water resistant adhesive fixed to the pressed steel door frame with following fixtures, i) Hold fasts of size 35x35x5mm, length 230mm-6Nos, ii)Powder coatd Aluminium Aldrop 250mm long-1No., iii)Ornamental handles sizes 200mm long - 1 No., iv)Anodised Aluminium Handle 250mm long-1 Nos, v)Anodised Aluminium towerbolts 200x12mm-2Nos, vi)Wooden Door stopper fixed to the frame by hinge arrangements -1No.,vii)Oxidised ron Butt hinges(100x30mm)-4Nos, viii)Rubber Bush-1No, ix)Safety chain-1No, x)Metallic magic eye-1No, xi)Stainless Steel Cylinderical Lock (Godrej or equivalent) with required screws with 3 Keys as directed by engineer at site including cost of transporting, lifting and fixing, embedding the hold fasts in walls rigidly with concrete PCC 1:2:4 ,cost of all materials, labour charges, Lead, Lift, T&P etc., complete. For Entrance Door.

Supply and fixing in position Flush Doors of required size with CRCA pressed steel Box section 18G or 1.25mm thick for Door frames of size 105x60mm, with single leaf factory made Solid core Flush shutters with commercial ply on both side with teak wood lipping alround 35 mm thick with water resistant adhesive fixed to the pressed steel door frame with following fixtures, i) Hold fasts of size 35x35x5mm, length 230mm-6Nos, ii)Powder coatd Aluminium Aldrop 250mm long-1No., iii)Anodised Aluminium Handle 200mm long-2 Nos, iv)Anodised Aluminium towerbolts 250x12mm-2Nos, v)Wooden Door stopper fixed to the frame by hinge arrangements -1No., vi)Oxidised Iron Butt hinges(100x30mm)-4Nos, vii)Rubber Bush-1No, as directed by engineer at site including cost of transporting, lifting and fixing, embedding the hold fasts in walls rigidly with concrete PCC 1:2:4 ,cost of all materials, labour charges, Lead, Lift, T&P etc., complete. For inner Doors.

Supply and fixing in position of partly pannaled and partly glazed Mild Steel Windows of required size using 72mmx72mmx3.2mm square tube for main frame and intermediate frames, 25mmx22mmx3mm ‘T’ section for shutter frame, with 2/3/4/6 leaves. Top leaves provided with two parts of glazed with 4mm thick pin head glass and the glass is to be fixed to the shutter frame using Pins and T.W. Beedings, bottom leaves paneled with MS sheet of 16Gauge and with 16mm MS bars 10 Nos horizontally inserted through the vertical frames as directed by Engineer incharge at site, with following fixures. 1. Holdfast - MS Angle of 35x35x5mm length 230mm, 2. Oxidised Iron Butt Hinges - 2 Nos for Each Shutter, 3. MS Handle of Required Size - 1 No. for Each Shutter, 4. Stay arrangements of Required Size - 1 No. for Each Shutter, 5. Screen hooks - Each 2 No at Top & Bottom as directed by engineer at site including cost of fabrication, transporting, lifting and fixing, embedding the hold fasts in walls rigidly with concrete PCC 1:2:4 ,cost of all materials, labour charges, Lead, Lift, T&P, one shop coat of red oxide primer etc., complete.

Providing, fabricating and fixing in postion MS Gates, MS Doors, MS Grills, MS Ladder, Purlins, Posts, etc., with required accessories such as but not limited to MS Angles, Channels, Pipes, flats, Square Bars, Shafts, Sheets etc., as per approved design and as directed by the Engineer in charge including cost of fabrication, transporting, lifting and fixing in walls rigidly with concrete PCC 1:2:4, cost of all materials, labour charges, lead, lift, T&P, one coat of red oxide primer, etc., complete.

Supply and fixing of Laminated PVC single leaf door SINTEX / STAR SUPREME make or equivalent of approved colour, Pattern and quality with shutter and PVC frame of required size and type with minimum 5mm thick PVC sheet as directed by the engineer at site with 3 Nos 100mm Aluminium butt hinges, 2 Nos 150mm anodized Aluminium handles, 2 Nos Anodised Alumium 200x12mm tower bolt and 1 Nos. 200mm Aldrop etc., for Bath and toilet including cost of transporting, lifting and fixing, cost of all materials, labour charges including fixing, lead, lift, etc., complete.

Supply and fixing of Aluminum anodized Louvered ventilator of required size, the outer frame in Aluminum Box section 62x38x4mm, the louvers with moving arrangements in Alu channel of size 60x30mm with necessary pinhead glass pans of 4mm thick Louvers, Al. clips including chipping, dismantling/making holes in masonry/Concrete wherever necessary and make good the disturbed area to the original condition after fixing, cost of all materials labour charges, lead, lift, fixing charges, Transport, T&P, etc., complete .

Supply and fixing partly panelled and partly glazed country wood Cup board of required size as directed by the Engineer in charge using factory made CW frame (75x32mm) and CW partly panelled and partly glazed shutters using 12mm thick particle board both side laminated of ISI stamped and 5.5mm thick plain glass of good quality and providing 4 tiers of 18 to 20mm thick Jet Black or equivalent colour Granite slabs (Super fine polished with machine cut edges) and making the sides smooth by nosing and polishing the edges for shelves including cost of all materials labour charges fixing charges, required fixtures and fittings to the cupboard such as Mortice Lock - (Godrej or equivalent) with required screws with 3 Keys, Butt Hinges 100 x 30mm - 8 Nos, Aluminium tower bolt inner hooks etc., lead, lift and 2 coats of solignum for portions and wood work in contact with masonry lead, lift, etc., complete.

Supply and laying of Jet Black or equivalent colour Granite slab of size above 4 feet x 2 feet (Super fine polished with machine cut edges) 18 to 20mm thick for kitchen platform with provision to fix the stainless steel sink, below the bed and making the sides smooth by full round nosing and polishing the same as directed by the Engineer incharge with CM 1:3 20mm thick making chase in walls, finishing to the original condition including cost of all materials, labour, lead, lift, curing, etc., complete.

Supply and fixing Stainless steel sink of minium length 600mm, depth 200mm and required width for fixing in the kitchen granite platform including cost of materials such as Stainless steel sink, 32mm dia C.P. waste couplingas directed by Engineer incharge at site, labour, making chase in walls finishing to the original condition, lead, lift, curing, etc., complete.

Supply and fixing 1 No concrete ring for fixing the 300mm exhaust fan in the wall inluding cost of all materials, dismantling brick wall to required size, labour charges, lead, lift, curing, etc., complete.

Supply and fixing Granite single side polished Corner slab of 30cm of size in the bath rooms, toilet wall corner and making the sides smooth by nosing as directed by the engineer at site including cost of materials, labour, making chase in walls for fixing, finishing to the original condition, lead, lift, curing, etc., complete.

Providing Surki in 40mm broken jelly in lime concrete 1:2:5 (One part of Lime, two part of sand and five part of brick jelly) of laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specfication as directed by the Engineer in charge including cost of all materials, Transporting, all labour, lead, lift, T&P, etc., complete.

Supply and fixing Indian water closet of size 530x410mm Parryware make or Equivalent (model - thrift) of approved quality and colour with ‘P’ or ‘S’ trap conforming to IS 2556-Part XII with 10 lit capacity PVC Cistern tank and 12mm dia Angle Valve water colset is connected with 32mm dia PVC 6Kg/cm² pipe of required length, packing the joints of the closet with the traps with asbestos rope using cement mixed with approved water proof compound, laying the closet over sand cushion and forming flooring around the closet using 40mm broken jelly in lime concrete 1:2:5 (One part of Lime, two part of sand and five part of brick jelly) of 100mm thick and finishing the top to required slope, connecting to soil pipes by dismantling the brick masonry / RCC making good the disturbed portion to original condition and finished water tight without leakage complying with standard specification as directed by the Engineer in charge including cost of all materials, Transporting, all labour, lead, lift, T&P, etc., complete.

Supply and fixing in position white Colour Glazed Model Floor Mounted European Water Closet of size 460x380mm of best quality and approved make with 100mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flpped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complee with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by mleans of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as 15mmbras connections, 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc, complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting including cost of all materials, labour charges, lead, lift, curing etc., complete complying with standard specifications.