Tender ID

DEFPROC

Active

Works

Civil Works

8916 REPAIR TO EXTERNAL PLASTER CHAJJA SLAB ROOF REPAIR IN 4 RMC CH COMPLEX AREA IN AOR OF GE SOUTH PUNE

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE SOUTH PUNE | Pune, Maharashtra

Amount: ₹40.0 LCloses: 24 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published3 Nov 2026
Submission Opens17 Nov 2026
Closes24 Nov 2026
Bid Opening1 Dec 2026

Tender Value

₹40.0 L

EMD Value

₹79,960

Closing Date

24 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

GE SOUTH

Address

NO 1 GEN BHAGAT MARG PUNE 40

Work Description

8916 REPAIR TO EXTERNAL PLASTER CHAJJA SLAB ROOF REPAIR IN 4 RMC CH COMPLEX AREA IN AOR OF GE SOUTH PUNE

Tender Information

Tender ID

2026_MES_797107_1

Reference Number

8916 GE SOUTH PUNE

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

180 days

Location

GE SOUTH PUNE

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS PER TENDER DOCUMENTS

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of application on letter head of the firm requesting issue of tender (.pdf)

RequiredScanned copy of cost of tender in form of DD or bankers cheque for Rs 500 in favour of GE South Pune (.pdf)

RequiredScanned copy of Enlistment letter including Appx A and B and renewal letter in MES (.pdf)

RequiredScanned Documents of Permanent PF Code Number and Scanned Copy of GST Registration Number (.pdf)

RequiredFor Unenlisted Contractors scanned copy of Docs meeting MES enlistment criteria for Class D Cat a i (.pdf)

RequiredFor Unenlisted Contractors scanned copy of Earnest Money Deposit (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE SOUTH PUNE

EMD Fee Amount

₹79,960

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

3 Nov 2026

Published

3 Nov 2026

Bid Opening

1 Dec 2026

Download Starts

3 Nov 2026

Download Ends

24 Nov 2026

Submission Starts

17 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (139 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), the surface even and Smooth without extra cement Including chicken wire mesh including taking down cement plaster on stone or brick wall walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.	255	Sqm	-	-
-	M&L for rendering 10 mm thick in cement mortar 1: 6 on fair faces of Brick/AAC block/PCC block work or concrete surfaces finished even & smooth without using extra cement Including chicken wire mesh including taking down cement plaster on brick or stone surface of wall built in cement sand mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.	190	Sqm	-	-
-	M & L for preparation of New surface of wall apply two coats of Plastic emulsion paint over primer over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth on wall complete all as specified & directed by Engineer-in-Charge.	540	Sqm	-	-
-	M & L Preparation of New surfaces and applying two coat of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns complete all as specified and directed. Note :- Exterior acrylic emulsion paint shall be anti-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality.	255	Sqm	-	-
-	Demolition of cement concrete reinforced roofs, crumple, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work of any description and in any position not otherwise specifically provided for all as specified and directed.	3	Cum	-	-
-	M&L RCC M-25 (Design mix) in 20mm graded aggregrate for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and directed.	3	Cum	-	-
-	M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.	240	Kg	-	-
-	M&L Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.	60	Kg	-	-
-	M&L for formwork to sides and soffits of flat floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. all as specified and directed.	25	Sqm	-	-
-	M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter etc. fair finished surfaces all as specified and directed.	8	Sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.08 MB

Work Item Documents

8916TenderDocs.pdf

Tender Documents • 0.64 MB

BOQ_894106.xls

BOQ • 0.82 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), the surface even and Smooth without extra cement Including chicken wire mesh including taking down cement plaster on stone or brick wall walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

255

Sqm

M&L for rendering 10 mm thick in cement mortar 1: 6 on fair faces of Brick/AAC block/PCC block work or concrete surfaces finished even & smooth without using extra cement Including chicken wire mesh including taking down cement plaster on brick or stone surface of wall built in cement sand mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

190

Sqm

M & L for preparation of New surface of wall apply two coats of Plastic emulsion paint over primer over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth on wall complete all as specified & directed by Engineer-in-Charge.

540

Sqm

M & L Preparation of New surfaces and applying two coat of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns complete all as specified and directed. Note :- Exterior acrylic emulsion paint shall be anti-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality.

255

Sqm

Demolition of cement concrete reinforced roofs, crumple, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work of any description and in any position not otherwise specifically provided for all as specified and directed.

Cum

M&L RCC M-25 (Design mix) in 20mm graded aggregrate for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and directed.

Cum

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

240

M&L Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for formwork to sides and soffits of flat floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. all as specified and directed.

Sqm

M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter etc. fair finished surfaces all as specified and directed.

Sqm