SPL REP TO BLDG NO E-46 AND 44-45/A AT NAMKUM POCKET, PROVN OF 02X BOREWELL INCL PIPE LINE AND ALL CONNECTED WORKS AT OLD ILP AND 01 X BORE WELL WITH SUBMERSIBLE PUMP WITH ACCESSORIES IN UNIT LINE AREA OF 23 INF DOU AT NAMKUM MIL STN UNDER GE RANCHI

Amount

Taking down chowkatts or frames (without taking off shutters from frame)exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed.

M&L pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc, complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction, with particle board core and plywood face panels commercial type on both side, complete all as specified and directed.

S&F 2nd class hard wood glazed and sketon door shutter 35 mm thick open rebated and prepared to receive glass/gauze (Without sash bars) divided into square with plain, chamfered or rounded, mitred and rebated sash bars the size of menbers of shutters as specified in SSR Part-I section 8 Clause 8.24 (a).

M&L anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.including (powder coating 50 Micron), complete all as specified and directed.

M&L anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.including (powder coating not less than 50 micron), complete all as specified and directed.

M&L anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc .including (powder coating not less than 50 micron), complete all as specified and directed.

M&L 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. Make : Kelwyn/Amar or equivalent

M&L aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work, complete conforming to Fe-410-0 or Fe-310-0.

S&F 140 mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed.

S&F aluminium anodised tower bolts of 200 mm long and 10mm dia stove enamelled black with bright bolt fixed, complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt having 250mm long 12mm dia with and including 1 minimum of 6 bolts and nuts four on bolt plate and two on staple plate, complete all as specified and directed.

S&F mild steel helical door spring 300mm with roller and roller plate fixed with screws or welded to frame, complete all as specified and directed.

S&F extruded aluminium alloy handles, 125mm in size fabricated type anodized fixed, complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0, complete all as specified and directed.

Dismantling Wall and ceiling boards of any description and any thickness including cover fillets, complete all as specified and directed.

M&L providing aluminum snap Grid frame work for false ceiling with of size 595x595 mm, using main and cross Tee of size 36.5 mm x 25mm x 1.4 mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with alu anodized angle of size 40 mm x 25 mm x 2 mm weighing 0.36 Kg/RM . the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia MS wire, J bolts, nuts and washers as per manufacturer's instructrions. Note : If any aluminum section found of less weight, the same ahall be worked out by actual weight and recovery @ Rs. 230/- Kg shall be made from contractors dues.

M&L 4mm thick Non asbestos fibre designer cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed.

Demolition of brick work built in cement morter including all quoins, arches, pillars etc, complete all as specified and directed.

M&L brick work with subclass 'B' bricks in CM 1:6 brick straight or curved on plain exeeding 6m mean radius, complete all as specified and directed.

Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description, complete all as specified and directed.

M&L 15mm thick rendering in CM 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair, complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 10mm thick in CM 1:3 on fair faces of concrete finished even and fair in ceilings, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL), complete all as specified and directed.

M&L Cement concrete 1:2:4 type B0 using 12.5mm graded agg 25 mm thick for laying of floor etc, complete all as specified and directed.

M&L non skid coloured iointfree tiles 7-8 mm thick area of each tile exc 0.18 sqm but not exc 0.38 sqm,as in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6), complete all as specified and directed.

M&L non skid coloured iointfree tiles 7-8 mm thick area of each tile exc 0.18 sqm but not exc 0.38 sqm,on vertical surface set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.

M&L cement concrete type B-1 (1:2:4) using 20mm graded broken stone agg as coping, benching, cills, lintels up to 1.50 mtr clear span, filling around hold fast , fitting in chowkats etc, complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc finished the surface even & fair, complete all as specified and directed.

M&L hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface, complete all as specified and directed.

M&L preparation of new wooden surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed..

M&L preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer, complete all as specified and directed.

M&L for three coats of White Wash on new ceiling surfaces including preparation of ceiling surfaces, complete all as specified and directed.

M&L complete removal of existing treatmemt and finishing the surfaces of wall with two coats of cement base paint of, any colour, complete all as specified & directed.

M&L prepration of newely plastered surfacea nd finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

M&L complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 3mm thick wall care putty, complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour, complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern, complete all as specified & directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe, waste coupling and waste pipe, complete all as specified and directed.

S&F in repairs PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts, complete all as specified and directed.

S&F in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F in repairs Fancy type bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F in reapir 15mm bore angular Stop valve cast copper alloy fancy type chromium plated, complete all as specified and directed. Make-Parko or equivalent

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site, complete all as specified and directed .

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site, complete all as specified and directed .

M&L cutting chases, pining in brick wall and making good in CM 1:3 for concealed water tubing, cutting n.exc 10 cm, complete all as specified and directed.

S&F15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing, complete all as specified & directed.

S&F 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing, complete all as specified & directed.

M&L 75mm bore PVC floor traps plain with grating fixed in repairs including jointing with solvent cement, complete all as specified & directed.

M&L preparation of Old painted surface of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed.

M&L creosoting including preparation of wood and wood based materials new or old of any description and girth not otherwise described, complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams clear span above 4 meters and up to 8 meters, complete all as specified and directed.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats et conforming to I. S 1161-1979 FE-410(Gde E-250, quality A), complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples, complete all as specified and directed .

Hacking out old broken glass (any thickness), size quality or description from metal frames incl punching or drilling out glazing pins/springs clips and providing and fixing new ones glazed with putty or fixed with beads, complete all as specified and directed .

M&L 20 to 25mm thick machine cut kota stone slab flooring over and including 20 mm thick screed bed of cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slabs including grinding and mirror polishing, complete all as specified and directed.

M&L 20 to 25 mm thick machine cut kota stone slab on vertical surfaces over and including 10 mm thick backing plaster in cement mortar (1:4), complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any postion.

Taking down carefully aluminium point wiring (light, socket or power) complete including fittings and fixtures such as switched, ceiling roses pendents, regulators, socket etc for re use to be measured separately including making good the disturbed portion/surface, complete all as specified and directed.

M&L point wiing with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed sized 1.5 Sqmm with concealed conduit with fixing accessories, to be fixed for one light/fan/bell point controlled by one switch with sunkhen box of suitable size incl continous earth wire of PVC insulated unsheathed multistranded copper conductor cable size 1.5 qmm for earth wire conncected to commo earth dolly, complete all as specified and directed.

All as per item No 68 above but for one 3/5 pin socket 5 Amp on independent board with 1.5 Sqmm wire with 1.5 Sqmm earth wire.

All as per item No 68 above but for one 3/5 pin socket 5 Amp on same board with 1.5 Sqmm wire with 1.5 Sqmm earth wire.

All as per item No 68 above but for one 3 pin socket outlet 15 Amp independent with 4 Sqmm incl continous earthing with multistranded copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.

S&F switch piano flush type /bell push, 5 Amps, single pole one way (Make : Anchor/Havells/Indoasian) (ISI Marked)

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose).

S&F socket 15 Amps flush type 230 Volts, AC complete.

S&F switch 15 Amps flush Type 230 Volts, AC Complete.

S&F Ceiling rose, surface backlite, 65x50mm, three terminal

S&F LED bulkhead 10W with IP 65 protection 240V

S&F LED Mirror light 10 Watt with diffuser, decorative type, complete all as specified and directed.

S&F 20W LED 6000K (4') wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electonic driver, optics diffused, complete all as specified and directed.

S&F 36W LED 6000K (2x2) panel light mounted white powder coated luminire screwless design, complete all as specified and directed.

Taking down & M&L for submain wiring 2x6.0 Sqmm + 6.0Sqmm earth wire single core PVC insulated FRLS sheathed copper cable connected to common earth dolly in and including heavy duty in concealed conduit including taking down old wiring all accessoried, complete all as specified and directed.

Dismantling and taking down existing unserviceable cable of any size and making good to disturbed surfaces to match the existing surfaces, complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electic power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 Core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per sited requirement use for services connecting as per specification, complete all as specified and directed.

Taking down unserviceable main switches MCB/s DB/s etc any type and capacity including making good the disturbned surfaces to match the existing, complete all as specified and directed.

S&F single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 08 Ways. Make Havells/Legrand/L&T

S&F MCB SPN 32 to 63 Amps 415 V incl all terminal, fittings etc, complete all as specified and directed. Make : Havells/ Legrand/L&T

S&F MCB SP 06 to 40 Amps 415 V incl all terminals, fittings etc, complete all as specified and directed. Make : Havells/Legrand/L&T

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6.0mm thick burried directly in ground (earth pin not less than 2.25 Mtr normal ground level) and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized means of earth wire 4 mm dia with bolts, nuts & check nuts and washers of galvanized iron protection pipe light grade of 20mm dia with bolts, nuts & check nuts and washers of galvanised rion protection pipe light grade of 20mm dia and watering pipe medium grade of 20mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in elctrical plate No 3 of SSR Part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing protection.

Drilling bore hole by means of using reverse rotary reamers bore hole drilling machine as trial bore hole of nominal bore 200 MM upto the depth of 50 mtr including taking out excavated material complete, all as specified and as directed.

All as per ser No. 89 but above 50 mtr and upto the depth of 100 Mtr

All as per ser No. 89 but above 100 mtr and upto the depth of 150 Mtr

All as per ser No. 89 but above 150 mtr and upto the depth of 170 Mtr

All as per ser No. 89 but above 170 mtr and upto the depth of 190 Mtr

All as per ser No. 89 but above 190 mtr and upto the depth of 200 Mtr Note for Ser tem No. 89 To 94 :- (a) The contractor shall arrange for the necessary T&P including drilling rig/machine at the site for drilling trial bore hole within the quoted rates. (b) The cost of fuel /lubricants etc. used for operation of drilling rig/machine shall be included in quoted rates. (c) The rates quoted here in above for drilling bore hole for a trial bore hole shall be carried out upto the desired depth / level aquifier level to achieve desired yield output. If the contractor fails to draw out water upto the desired yield output, then he has to dig bore to the another alternate location within the same quoted rates as directed.

Yield test for the bore well with mechanical V. notch system by continuously run of borewell for minimum 16 hours to determine safe/regular pumping/water yield including making necessary arrangements. Note:- Necessary T&P for V.notch system to carryout yield test shall be arranged by the contractor at the site within quoted rates.

M&L for lowering of P.V.C casing pipe of nominal bore 200 MM heavy duty ISI marked upto the depth of 200 mtr in continuously coupled with P.V.C sockets of suitable size duly fixed permanently by means of adhesive solvent, complete all as specified and directed.

Material and labour for fixing of end Cap P.V.C suitable for P.V.C casing pipe of nominal bore 150 mm dia, complete all as specified and directed.

M&L for fixing of M.S holding clamp split type in two halves necessary nut both and washers of suitables size and length using M.S flat of size 50 mm x 10 mm. Note:- Necessary PCC around casing pipe and placing holding, complete all as specified and directed.

Supply and install submersible pump, electric driven, 415 volt, 3 phase suitable for 200/250 mm dia borewell (casing pipe size 200/250 mm) complete upto 7.5 WHP of head range 52 m to 84 m and discharge range 395 L/min to 245 L/min.

S&F PVC insulated submersible cable water proof flat type 3 core with stranded copper conductor cable, 6 Sqmm, 1100 Volts grade inculding cable lugs/joints, connection to submersible motor and other end to aluminium amoured cable including jointing, complete all as specified and directed.

M&L GI flange joints with rubber gasket of 3 mm thick chemically treated compressed including suitable size bolts, nuts and washer, complete as directed of 50 mm dia, complete all as specified and directed.

S&F of steel rope in submersible bore wells from motor to top edge of the bore well of size 6 mm dia (Multi wire stainless steel) for holding of submersible pump motor set, complete all as specified and directed.

S&F tubes galvanised Heavy class complete with all fittings laid in boreholes of size 50 mm bore all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60x60cm x 6mm thick, buried directly in ground (eath pit not less than 2.25 metres deep below groung level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.

Excavation in trenches not exceeding 1.5 wide and not exceeding 1.5 mtr in depth in soft/loose soil for laying of pipes and getting out complete, all as specified and as directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete, all as specified and directed.

Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr. Above the starting point complete, all as specified and directed.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches of size 40 mm bore complete, all as specified and directed.

S&F GI tubing medium grade ISI marked including all fittings laid in trenches of size 50 mm bore complete, all as specified and directed.

S&F of Gun-metal globe or gate valves with iron wheell head screwed both ends for iron pipe and fixed of size 40 mm dia complete, all as specified and directed.

S&F of Gun-metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed of size 50 mm dia complete, all as specified and directed.

M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 sq. mm 4 Core, complete all as specified and directed.

M&L for construction of brick masonry valve chamber of size 600x600x600 cm (Internal dimension) including necessary excavation and earth work in any type of soil angle iron frame MS Sheet cover with locking arrangements including painint two coats of synthetic enamel pain over a coat of red oxide primer, complete all as specified and directed.

M&L NRV of size 50 mm

M&L NRV of size 80 mm

M K Enterprises

BHARATI ENTERPRISES

M/S ABDHESH CONSTRUCTION

M/s Dwarika Nath Singh