ADDN ALTN TO MRCC SECTION AT CGRHQ A N AT COAST GUARD AND SPECIAL REPAIR OF EXISTING TOILETS AND SANITARY APPLIANCES UNDER GE HADDO PORT BLAIR

Amount

Demolition of cement concrete block masonry walls built in cement mortar or cement lime mortar complete all as specified & directed

Cutting openings through walls for door, window and other openings or enlarging existing openings, etc and rubbish off the premises built in cement mortar or cement lime mortar complete all as specified

M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified & directed.

M&L for precast cement concrete solid building block masonory or slabs n exc 10 cm thick (with plain or interlocking joints as directed) setting in CM 1:4 , Type C1, PCC 1:3:6, (using 20mm graded stone aggregate), complete all as specified & directed.

Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete un-reinforced in any position and paving n exc 15cm thick above or below ground level complete all as specified

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, dark shade with border design, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including cement screed bed 15mm thick in cement mortar 1:6, etc complete all as specified.

Ditto all as per item No 07 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.

M&L for 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base to flooring etc all as specified and as dierected.

M&L Joint free Non skid ceramic coloured tiles 7mm to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, etc complete all as specified.

M&L for Glazed ceramic designed coloured tiles Digital quality as in vertical surfaces of size 300x450X7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.

M&L 16 to 20mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform or simillar, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete. Note: Colour of granite shall be as approved by Engr-In-Charge

Dismantling of ceiling boards including grid of any description fixed in any position with nails or screws etc all as specified and as directed.

M & L for seamless false ceiling made out of 12mm thick of gypsum board fixed to the ceiling section with 25mm long self drilling and tapping screws having Philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated joining compound and 48 mm wide fibre tape to provide seam less finish and including GI channel 0.55 mm thick with two unequal flanges of 20 to 30mm and web of 27 mm fixed to surrounding wall using nylon sleeve and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 215 mm each and web of 45 mm suspended from soffits at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20mtr length) of 0.55 mm thick having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long including thin layer of Pop with Gypsum binder, sanding the surfaces till smooth surface is obtained and finally applying two coats of acrylic emulsion over one coat primer over 3mm thick putty all as specified and as directed

Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed

S&F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 etc complete all as specified and as directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long etc complete all as specified and as directed.

S&F Aluminum anodized barrel bolt of extruded section 150mm long etc complete all as specified and as directed.

Taking down Aluminium frames or Doors with shutters without taking off shutters from frame Exe 1.5 Sqm but N exc 4.00 Sqm each

Dismantling Aluminium Partitions with glass or panels, etc and safely fixed in any position and of any description etc all as specified and directed.

S&F anodised aluminum frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L for 12mm thick Prelaminated particle board, exterior grade with decorative choice lamination on both sides as in Doors, Cub boards, cabinet, shelves etc and in simillar works, fixed with screws as reqd etc all as specified and as dierected.

Supply only plain sheet glass 6.30 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter exc 0.5 Sqm in each pane complete all as specified & directed

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers etc complete all as specified and as directed.

Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and fixing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified & directed

Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples or beading etc all as specified and directed.

M&L for 18mm thick Prelaminated HDF boards (fire & water proof) as in Cub boards, cabinet, shelves etcand in simillar works, fixed to the walls with screws as reqd etc all as specified and as dierected.

S&F Auto concealed Cabinet Hinges, full overlay of size 103 x 64mm etc all as specified and as directed.

S&F Fancy 'D' Type Drawer / Cabinet handles of Size 100mm, etc all as specified and as dierected.

S&F Magnetic catcher with plate, glossy finish for Drawer / Cabinet of Size not less than 50mm, etc all as specified and as dierected.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) etc complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.

S&F for 110mm dia PVC (SWR) branch piece single (Single 'Y') equal or unequal complete all as specified.

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.

S&F for 75 mm dia PVC (SWR) grade bends of any radius etc complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius etc complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) branch piece single (Single 'Y') equal or unequal complete all as specified.

M&L in repairs PVC (SWR) multi floor trap 75mm with openable or hinge type grating including jointing with solvent cement complete all as specified.

S&F for 50mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed.

S&F in repairs vitreous china ware over counter one piece wash hand basin, white of size 500x400x130mm including CP waste coupling, waste fittings, and all necessary inlet, out let connections complete etc all as specified and directed. Make: Cat No: 4705 (MIST) of Prayag or Equivalent approved.

S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and directed.

S&F in repairs 15 mm bore CP Swan neck pillar taps fixed to wash hand basin and making necessary connections etc complete all as specified and directed. Make: Cat No: 8014 (MABEL) of Prayag or Equivalent approved.

S&F in repairs 15 mm bore Bib taps, long body with flange cast copper alloy, chromium plated fancy type with capstan head handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repairs CP two way bib taps 15mm cast copper alloy fancy type with wall flange screwed down for Iron pipe and fixed etc complete all as specified and directed. Make: Cat No: 9012 (EUROPA) of Prayag or Equivalent approved.

S&F in repairs Hand shower (health faucet) with 1.0mtr long flexible tube with wall hook complete all as specified and directed. Make: Cat No. BEA-101 of Prayag or Equivalent approved

S&F in repairs CP Angular stop cock fancy type with wall flange screwed down for Iron pipe and fixed etc complete all as specified and directed. Make: Cat No. 6810(MARCUS) of Prayag or Equivalent approved

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets etc complete all as specified.

S&F Brass chromium plated Toilet paper holder Complete all as specified and directed. Make : Prayag Cat Part BA-38 or equivalent

S&F Brass chromium plated towel rail (Fancy type) 20mm dia D-type, 60cm long between flanges etc complete all as specified.

S&F Brass chromium plated towel ring fixed with screws complete all as specified (Min weight 90gms).

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts etc complete all as specified.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Min weight 105 gms) complete all as specified and as directed..

S&F Brass chromium plated soap dish holder complete all as specified and as directed. Make : Parayag Cat part No. BA-45 or equivalent.

Taking up or down 15mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and directed.

S& F for 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed.

S& F for 25mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed.

M&L for 25mm dia or bore Galvanized steel tubing " Medium Grade" with all fittings and fixed complete to walls including taking down of old unserviceable pipe complete all as specified and directed.

S&F 20mm dia gun metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron or CPVC pipe, fixed in repairs complete all as specified and as directed.

Supply and fix Vitreous China urinals flat back of size 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete with waste pipe of polyethylene of low or high density including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; and including 32mm dia waste pipein low density polyethylene (LDPE) opf pressure rating 6 kgf/sqcm of 1.0 meter length, PVC connection 15mm size PTMT nuts of length 450mm, concussive push taps 15mm dia or bore, cast copper alloy, screwed for iron pipe, urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Min weight 60 gms), fixed complete all as specified and directed.

M&L for providing chromium plated overhead shower rose with or without swivel joints, fixed to 15 mm bore of pipe complete all as specified and directed.

M&L for corner glass shelf assembly size 300mm with chromium plated bracket guard and railing complete all as specified and directed. Make : Prayag Cat part no. BEA-44 or equivalent)

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick cement plaster in CM 1:4 with WPC on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement etc complete all as specified and as directed.

M&L for Preparation of newly plastered internal wall surface and applying two coats of distemper oil emulsion over a coat of primer over the coat of 3mm thick wall care putty etc complete all as specified and as directed

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard or equivalent).

M&L for complete removal of existing treatment on internal wall surfaces and applying two coat of distemper oil emulsion over a coat of alkali resistant priming paint over a coat of 3mm thick wall care putty etc complete all as specified and as directed

M&L for PCC type D2 1:4:8 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

M&F 18 mm thick rubco huat rubwood in built up interiors as in cupboards, shelves wall lining, box structure and including all fitting items complete all as specified and directed. After completing the carpentry works all the visible woods area will be sanding by No.60 & 80 Wood Sanding Paper, after that will be applying Sheenlac make Filler with mixing of NCD Thinner (Sheenlac make), then pasting Chock Putty in the shabby/nailing area which will be sanding with No.120 Sanding Paper, after that will applying Sealer of Sheenlac make and walnut colour stainer, then cutting with No. 320 Sand Paper, after completing the above process will spray Melamine Polish of Berger/Sheenlac make then cutting with No.400 Sanding Paper. Finally will applying Silicon make: Waxpol with soft Banyan Cloth for better shining/finishing. Make of rubber wood members: RUBCO or equivalent

S&F 5mm thick solid PVC sheet Wall Lining with wood grain printed design and inclusive of solvent cement for fixing over and including 5mm thick PVC sheet fillet frame of width 35mm fixed to the aluminium frame of size not less than 25sqcm with screws at 300mm centre to centre in mid portion & alround on borders or as per the site requirements etc as per specifications and directed by the Engr In Charge

S & F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site

S&F in repairs 12mm thick toughened glass in required size duly crystal polished at the edges and with full etched design finalized by GE in different colours fixed with stainless steel brackets of size 50x25mm, 100mm long made out with 3mm thick SS sheet at the top and bottom, Dorma X:C fittings & Dorma floor springsor ss pivot ,stainless steel handles 600mm D typeand locking arrengement to each door, stainless hinges to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser & all necessary hardwares for functioning etc all as directed

S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long bathroom / kitchen and fixed to wall complete all as specified and directed

Supply, install, test & commissioning of Split type air conditioner, 2.0 TR capacity,BEE 5-Star rating, having cord less remote control unit, wall mounted inverter type with built-in ioniser and plasma filter for better air quality, copper wound, electric driven, single phase, 240 volts, 50 Hz, AC supply including transporting to site, fixing of indoor and outdoor units with necessary wall mounting brackets, necessary copper piping minimum (3+8*) RM for connections, cutting, bending, brazing, proper insulation on copper pipe and all other pipes, PVC drain pipe upto ground level, installation complete with all accessories including connecting electrically between indoor and outdoor units with suitable size of PVC insulated multistranded copper conductor, complete all as specified and as directed. MAKE: BLUESTAR IC 524 DNU/HITACHI/DAIKIN NOTE: 1. Extra All connected pipes upto 5* RM shall be included in quoted rate. 2. The drain out water pipe connection should be conncted up to ground level along with PVC conduit of size 20mm dia.

Supply and fix Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of +- 2.5 % and capacity 5 KVA complete all as specified and as directed.

M&L for copper tubing, confirming to relevant IS of 5/8" flare size complete all as specified and directed.

M&L for copper tubing, confirming to relevant IS of 1/4" flare size complete all as specified and directed.

S &F in replacement of Sheet metal enclosure with socket plug top & MCB single pole and neutral enclosure with two pin and earth plug & socket complete with one single pole MCB 32 Amps including all as specified and directed by Engr-in-Charge

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc.

Taking down fuse Unit/DBs 415 Volt/230 Volt

Taking down old aluminium sub main wiring of any size.

Taking down existing light fittings of any type any capacity complete all as directed.

M&L for Point wiring two single core 1.5 sqmm size PVC insulated, unsheathed FRLS multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLS multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including cocealed / surface PVC coduit of size not less than 20mm dia with all fittings, in wall/roof /floor including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/fan regulators etc. covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :- Make of wire : Polycab/Gloster/Anchor/Havells/ Finolex/Anchor Make of PVC Conduit : Modi/Precision/Supreme/Finolex /Polycab

All as per Srl item No 97 above but One light/fan point controlled by one switch 5 Amps one way.

All as per Srl item No 97 above but, point wiring for 3 pin switch socket outlet , 5 Amps on independent board

All as per Srl item No 97 above but, point wiring for 3 pin switch socket outlet , 5 Amps on same board

All as per Srl item No 97 above but, point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour as earth continuity conductor for one 3 pin 15 Amps socket outlet on independent board.

All as per Srl item No 98 above but, point wiring for 3 pin switch socket outlet , 15 Amps on same board

S & F for switch modular type, 6 Amps 1 module, 230 volts AC Circuit complete all as specified and directed. Make : Roma (Anchor)/Legrand/ Havells/Siemens

S & F Switch modular type, flush type, single pole one way 15 Amps all as directed.

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, flush type 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/Legrand/ Havells/ Siemens

S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16, flush type, universal all as directed. Make : Roma (Anchor)/Legrand/ Havells

Supply & fix AC starter switch of capacity 25 Amps working on 240 volts AC supply with 15 Amps plug top and 15 Amps sockets suitable for air conditioner Make : Crabtree Model No : ACTO252504 or equivalent in Anchor / Standard

Supplying, fixing and testing tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make : Luker Cat Part No : LT5M20 or equivalent to CG/Philips /Havells

Supplying, fixing and testing tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make : Luker Cat Part No : LT510P or equivalent to CG/Philips /Havells

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 18 Watt recess mounted 220V , 50Hz with Aluminium housing ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Philips Cat Part No : Dura Slim or equivalent make in CG//Havells. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting .

S & F and testing fully diffused recessed mounted 2' x 2' LED luminarie with high transmitive diffuser for indoor spaces of cap 36 watt including all accessories and fixing arrangements for fixing the light fitting to any heighted indoor places complete all as specified and directed. Make : Philips model No. RC360B LED 36S-6500 V1 L60W60 PSU OD or equivalent to Havells/CG/Luker

S & F FUOCO track LED light 12 watt, (WH/WW/NW) on channel of suitable size of required length as directed. Make : Luker model No. LSPT12 (60 degree) or equivalent to Havells/Philips/CG

Taking down carefully ceiling fan / Wall fan of any make, size from its location, and deposit to the MES yard/Store.

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V Ac, 50 Hz complete with all accessories. Make: CG Model No : ENERGION Riviera with out remote 32 watt or equvalent make of Havells/Orient/ Usha /Bajaj/ Luker

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd 120 W complete all as specified. Make : Roma (Anchor)/Legrand/Havells.

S&F wall mounting Fan 400mm sweep including all fixing arrangement complete all as specified and as directed by Engineer-in-Charge. Make : Havells Model No : 400mm FHWMWHSWHB16 (Marvel Wind HS White Blue) or equivalent to Eva/CG/Usha/Orient

S & F air ventilating fan 250mm sweep single phase, 230 volt, PVC body with louvers incl all fixing arrangement complete all as specified and directed Make : Havells Model No. FHVVEDXOWH10 Ventil Air DX or CG Model No. BRISK AIR NEO or equivalent to Orient/Usha/Khaitan

S & F Sub main wiring with PVC insulated cable 2 single core 2.5 sq mm 1100 V grade with stranded copper conductor cable with provision of PVC insulated copper conductor single core 2.5 sq mm for earth continuity, using proper colour coding Phase Red /Yellow/ Blue, Neutral- black and earth- green including rigid PVC conduit concealed in wall/ on surface (ISI marked) all as directed. Make:Gloster /Havells /Anchor /Polycab /Finolex NOTE : Three runs of 2.5 sqmm cable alongwith one length of conduit shall be measured as one unit.

S & F Sub main wiring with PVC insulated cable 2 single core 4.0 sq mm 1100 V grade with stranded copper conductor cable with provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity, using proper colour coding Phase Red /Yellow/ Blue, Neutral- black and earth- green including rigid PVC conduit concealed in wall/ on surface (ISI marked) all as directed. Make:Gloster /Havells /Anchor /Polycab /Finolex NOTE : Three runs of 4.0 sqmm cable alongwith one length of conduit shall be measured as one unit.

S & F Sub main wiring with PVC insulated cable 2 single core 6.0 sq mm 1100 V grade with stranded copper conductor cable with provision of PVC insulated copper conductor single core 6.0 sq mm for earth continuity, using proper colour coding Phase Red /Yellow/ Blue, Neutral- black and earth- green including rigid PVC conduit concealed in wall/ on surface (ISI marked) all as directed. Make:Gloster /Havells /Anchor /Polycab /Finolex NOTE : Three runs of 6.0 sqmm cable alongwith one length of conduit shall be measured as one unit.

M & L submain wiring with 4 run single of 10.0 sq mm multistranded copper conductor cable (FRLS) PVC insulated 1100 Volts grade and one run of 10.0 sqmm PVC insulated multistranded copper conductor cable (FRLS) earth continuity conductor Including lugs of suitable size drawn in and including rigid PVC conduit concealed in wall (ISI marked) of suitable size complete all as directed. Make of wire : Polycab/Gloster /Anchor/ Havells/ Finolex and Make of PVC conduit : Modi/ Precision/Supreme/ Finolex/ Polycab NOTE : Five runs of 10 sqmm cable alongwith one length of PVC conduit shall be measured as one unit .

S & F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 160 Amps/200 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated and making good to the distrubed surface /walls complete all as specified and directed. Make : C&S / Indo Asian /Havells/L&T

S & F Triple pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TPN DB system 04 ways,including taking down old unserv DB of any type /rating and making good to the distrubed surface /walls. Make :C&S/ Indo Asian /Havells/L&T/Legrand

S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways,including taking down old unserv DB of any type /rating and making good to the distrubed surface /walls complete all as specified and directed. Make :C&S/ Indo Asian /Havells/L&T/Legrand

All as per item No. 121 above but 8 way complete all as specified and directed. Make :C&S/ Indo Asian /Havells/L&T/Legrand

All as per item No. 121 above but 4 way complete all as specified and directed. Make :C&S/ Indo Asian /Havells/L&T/Legrand

Supply and Fixing 4 pole MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed Make :C&S/ Indo Asian /Havells/L&T

S & F MCB TPN 20-32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : C & S/ Indo Asian/ Havells/L&T

S & F MCB TPN 63 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : C & S/ Indo Asian/ Havells/L&T

Supplying & fixing MCB SPN 40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : C & S/ Indo Asian/Havells/L&T

Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. Make : C & S/ Indo Asian/Havells/L&T Note for item No 119 to 128 :- All the circuits should be connected to MCBs alongwith copper reducer terminals duly crimpled.

Taking down carefully existing split type air conditoner of any make,type, size and any tonnage keep in safe custody of contractor and painting the outer area and re-fixing the same its location after completion of work all as directed.

Taking down carefully existing speaker of any make,type, size and any Amps keep in safe custody of contractor and painting the outer area and re-fixing the same its location after completion of work all as directed.

Taking down carefully existing smoke/heat detector of any make,type, size keep in safe custody of contractor and painting the outer area and re-fixing the same its location after completion of work all as directed.

Supply and laying of rigid non metallic PVC conduit of 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reduses, bell mouth tube ends and fixing accessories such as couplers lock nuts, saddles pipe hooks etc all as directed.

All as per item No. 132 but 32mm dia all as specified and directed.

M & L Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement all as specified and as directed by Engineer-in- Charge

Supply and fixing of metal box, flush type, 1.6mm thick suitable for 4 module complete all as specified and directed by Engr In charge. Make :- Anchor/C&S/Crabtree.

Supply and fixing of top modular plate of size 4 module suitable for mounting of modular sitch / socket all as specified and directed Make :- Anchor/C&S/Crabtree.

Supply and fixing with wall, piller, wooden structure etc. uPVC Panel Trunking of size 60 mm (H) x 60 mm (W) for running of wire, cable of any type etc complete all as specified and directed by Engr In charge. Make :- Precision or equivalent .

Supply, laying, testing and commissioning of LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 70 Sqmm 3.5 core (laid on floor/Roof/wall in proper saddling all as specified and directed. Make Polycab/ Gloster/ Anchor/ Havells/ Finolex.

Supply and laying/ fixing in trenches, cable ducts ,clamping on wall or any place DWC HDPE pipe of size 50 mm (OD) x 38 mm (ID) along with connected accessories like couplers. bends,end caps etc. for LT cable protection all as specified and directed

Earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6.15 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.

CARTWHEEL CONSTRUCTION

Kakolil Trade Agencies

Sree Tirumala Enterprises

M/s Ramesh Lal

ASHOK BISWAS

SHUBHAM SHANKAR GAIKWAD

M/s Pooja Enterprises