Maintenances and Miscellaneous work in Chemical lab Room No. MF-23 at AMPRI, Bhopal.

Amount

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm bend

Providing and fixing on wall face unplasticised - PVC pipe clips of approvd design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarsed sand ) and making good the wall etc complete. 110 mm

12 mm cement plaster of mix :1:4 (1 cement: 4 sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Removing dry or oil bound distemper, oil paint water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead

Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead

Of area beyond 3 sq. metres

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :Thickness above 10 mm up to 25 mm

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :100 mm dia pipe

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.32 mm nominal outer dia Pipes

Cutting holes up to 30x30cm in walls including making good the same 18.76.1 with common burnt clay F.P.S. (non modular) bricks

Providing & Applying polymer modified, flexible cementtatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @ 14.35kg / 10 sqm. One coat of self priming of cementatious waterproofing polymer (dilution with water in the ration of 1:1) and two coats of cementatious waterproofing polymer ( dilution with water in the ratio of 3:1) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster in visible complete in all respect as per the direction of E-in-C

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 50mm average thickness

Providing and fixing over cabinet in exiting structure of kitchen of size approx 0.45x 3.90M (approx)on plan and 1.50 high with doors of required size and other fittings handles locks, hinges etc. as needed and plyboard 16 mm and mica 0.75mm on front and balancing lamination on back and fitting of make hettich/ hafle/ blum.The over cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing under cabinet with doors of required size and other fittings like handles hinges etc. as needed in ACP Sheet and Edges in aluminium section including aluminium framing with butt hinges, latch, handle and fitting of standerd make.The shelves of under cabinet of the platform will be made of ply board with mica on top with fitted with support for storage including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. For any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing on wall face unplasticised Chemical resistant pipes including jointing with seal ring leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 6 Inch diameter(6 kg per cm) Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Providing and fixing blackout roller blind of approved make design in window of required size in approved pattern and design as directed by E-in-C

Labour for shifting of miscellious equipment, junk clearance etc

P/f aluminium partition in aluminium section medium gauge with 4mm glass / 12mm board ISI marked including fitting with clip, rubber as required with screws, handles, door stopper hinges, L-drop etc all fittings and fixtures as required and desired by E-in-C. (Old aluminium section/glass/board as per availability will be used contractor are requested to visit site to access quantity).

P/f aluminium Sliding window in aluminium section powder coated medium gauge with 4mm glass and required sealing rubber including fitting with clip, rubber as required with screws, handles, Latch, hinges etc all fittings and fixtures as required and desired by E-in-C.

Providing and fixing Laboratory tap with fitting and fixture complete as per instruction of E-in-C.

Providing and fixing of counter plateform for corner cabinet with Granite of average thickness 16mm over Marble stone of average thickness approx 16mm of size of plateform over brick wall 0.10m wide with plaster in cement mortar 1:4 (1cement and 4 sand) 1.2x 1.5M (approx) on plan. Vertical wall of the cabinet will be of brick work. The edges of plateform will be moulded in required shape. as required as per site requirement and instruction and decision of E-in-C.

Providing and fixing table top fumehood of size 4ft x 3ftx3ft a) with outer MS powder coated & Inner stainless steel. Inner chamber size 4ft (w) x 3ft (h)x3ft (d), outer body made up of 1mm MS sheet, Interior work surface made up of with stainless steel, Work top with existing black granite with sink, Exhaust blower Inline poly propylene with 6 inch PVC Ducting, Fluorescent lamp, Vertical opening glass sash with counter weight arrangement, provision of 2 power point & 1 gas regulator.

Wiring for circuit / submain wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required

2 X 2.5 Sq.mm + 1 X 2.5 Sq.mm earth wire.

2 X 4 Sq.mm + 1 X 4 Sq.mm earth wire.

Supplying and fixing follwing modular Switch/Socket on the exixting modular plate & switch box including connections excluding moddular plate etc as required.

3 pin 5/6 Amps Socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make - BEC/Kissan/Kasta/ Supreme/ Sudhakar/ Reliance)

Supplying,installation,testing and commissioning of prewired LED compact light fitting of following type complete with all accessories etc. recess/surface/panel/flase ceiling i/c connection with 3 x 1.5 sq. mm FRLS PVC insulated copper conductor wire earthing etc. as reqd.

supplying and fixing of LED Recess/surface mounted downlight 12/18 watt with Lamp complete with connection and testing etc as required as per Havells modal no.LHEAABPIL1WO012 or similar make like havells/ Crompton/philips/wipro)

Supplyiong and Fixing following size/ Modular plate, GI box alongwith modular base & cover plate for modular switchesin recess ets as required

8 module

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying Installation testing and commissioning of 250 mm , 1400 rpm PVC exhaust fan including louver/ shuter as front cover in the existing opening, including making good the damage, connection with 3 x 1.5 Sq. mm copper conductor i/c testing, commissioning etc. as required.(Make:Crompton/Orient/Bajaj )

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

M.R.Traders

A S build and construction