Improvement of illumination system of surrounding premises of different buildings of Institute of Psychiatry COE.

Amount

Dismantling of old,damaged light fittings along with worn out cables and conduits from the outer wall surface of Heritage Building, Backside garden, main passage shed etc. as per direction of EIC

Supply of IP-67 protection outdoor type street light luminaire with PDC housing and street light optics to ensure uniform distribution. Make: Philips/Lighting Technology/Osram

75 W, having light output not less than 10000 Lm & 6000 K [Philips Cat No: BRP032P LED 75 CW PSU GR SPD]

120W, having light output not less than 165000 Lm & 6000 K [Philips BRP 033 LED 120]

Supply of IP-67 protection outdoor type flood lighting luminaire with single die ceramic base high power LED, PDC housing and unique narrow beam flood optics (NB) to ensure uniform distribution, having efficacy not less than 130lm/w, with CCT 6500K & CRI 70. Make: Philips/Lighting Technology/Osram

70W [Philips BVP281 LED 085 CW FG SY5 WB 70 WVI]

150W [Philips BVP 283 LED 181 CW FG SY 5 WB 150W SPDVI]

Supply of Surface/Suspended mounted waterproof (IP65) luminaire suitable for single T8 TLED lamp along with Supply of 1X18/20W, 1200mm, 2100lm, 3000K LED tube light with inbuild heat sinkable driver TCW 450 P 1 X T LED P3397

Supply of Surface/Suspended mounted waterproof (IP65) luminaire suitable for twin T8 TLED lamp along with Supply of 2x18/20W, 1200mm, 2100lm, 3000K LED tube light with inbuild heat sinkable driver TCW 450 P 2 X T LED P3397

Supply & Fixing of post top decorative outdoor luminaries with thick non transparent polycarbonate top cover with anti-theft locking arrangement suitable for B22 LED LAMP (with Milky Acrylic) (with out lamp) (Make: Crompton/HAVELLS/PHILIPS/K-Lite EQUIVALENT)

Supply of B22 12W LED Lamp(Philips/Crompton/Havells make)

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

Supply and Fixing SMC Junction Boxes of dimention (250x200x105)mm with IP 67 protection (Sintex / Hensel ) Mounted directly on wall surface by suitable fastner for compound light. With 3 pole terminal stud and 6A 10KA C curve SP MCB Legrand make, one compression type pvc cable gland for 3 core 6 sqmm PVC/A cable including mending good to the damages to wall as per EIC.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required - 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supply of 3 core 6sqmm, 1.1kv grade XLPE insulated insulated armoured Al cable. (Make: Polycab/Finolex/Gloster)

Laying of cable 3 core 6 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable 3core 6 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying only Cable 3core 6sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required - 40mm

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2 / 4 / 3.5) Core as per GS.

3 Core 6 Sq. mm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. - 12 mm dia holes on the GI pipe

Connecting the equipments to earth busbar including S & F Solid GI wire No. 4 SWG (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

Dismantle the old pole muffing after disconnecting the old connection and reconstruct the pole muffing by providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S&F SMC Junction Boxes of dimention (250x200x105)mm with IP 67 protection (Sintex / Hensel ) Mounted directly inside Pole muffing by suitable fastner for compound light. With 3 pole terminal stud and 6A 10KA C curve SP MCB Legrand make, one compression type pvc cable gland for 3 core 6 sqmm PVC/A cable including mending good to the damages to wall as per EIC.

Supply delivery of 9 Mtr Steel Tubular Pole (Zindal /Bansal) as per specification Type 410- SP-29 as overall length9mtr weight 125KG & having diamention as per details given bellow: Out side dia & thickness of the Bottom section (139.7X4.85) mm; Middle;(114.3X4.5)mm,Top Section (88.9X3.25) with fixing the base plate as per direction of EIC)

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S&F SMC Junction Boxes of dimention (250x200x105)mm with IP 67 protection (Sintex / Hensel ) Mounted directly inside Pole muffing by suitable fastner for compound light. With 3 pole terminal stud and 6A 10KA C curve SP MCB Legrand make, one compression type pvc cable gland for 3 core 6 sqmm PVC/A cable including mending good to the damages to wall as per EIC.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole

One coat of red lead/Zinc chromate priming

1st coat of synthetic enamel paint over the primer

2nd coat of synthetic enamel paint over the 1st coat

S & F 250V 25A Timer controller for AC machine in SS double door 8-way DB enclosure (Make:- LK, encloser cat no DBSPN012DD) or equvalant) with S&F following electrical accessories & front door locking arrangement with all connection by finishing the ends of 2x4 & 1x2.5 copper wire dowells solderless socket by crimping method as to GS earthing attachment on wall incl necessary connections as per direction of EIC :- i) 20A DPMCB (LK make cat no B20250C) --- 1 No ii) 24 Hr programmable Digital/Analog Timer (LK make cat no 67DDT0) ---- 1 No iii) 3 pole power contractor (LK make cat no MNX 22/230V) with 1 NO +1 NC additional contact block ---- 1 set iv) 2 Moduler AC motor stater (Legrand/Myrius) ---- 1 No. V) 2 Module plate with cover (Make :- Legrand/Myrius) -- 1 No vi) 20A Auto-Off-Bipass SPDT toggle switch (approved/reputed make) ---- 1 No. vii) 10A SPST Moduler type switch (Make :- Legrand/Myrius) - 1 No. viii)Outgoing connector make ELMAX (approved/reputed make) - 1 No

Scraffolding arrangement by making suitable scaffolding by bamboo, ropes & wooden plank etc to be provided as per direction of EIC with transportation cost.

TERMS & CONDITIONS :- The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liability Period 1 (One) year

Make & model of each and every material to be approved by EIC

M/s Singh Electrical Works (BID ID -5695907)

JOY MA TARA ELECTRICAL CO. (BID ID -5722460)