Supply, Installation, testing and Commissioning and AMC of various capacity STPs at Ambala, Bijwasan and Rewari Terminal under Delhi and Haryana State Office

Amount

Part-A: Supply, Commissioning of STP: Ambala Terminal SEWAGE TREATMENT PLANT as per the Technical Specification . (As below) a) The scope of activity shall include design, drawings, getting approval from statutory authorities, supply, supervision, erection, testing and commissioning of required capacity of STP as specified below with all electrical, mechanical, civil and piping works. b) Scope of supply of each Sewage Treatment Plant shall include but not necessarily be limited to following equipments to achieve the outlet quality as per Clause 4.0 Design Parameters of the Technical Specification. Any additional equipment required to achieve treated water quality shall be included by the Vendor in their scope of supply. List of Equipments for each of the skid mounted STPs Bar Screen (1 No), Grit Chamber (1 No), Oil & Grease Trap Chamber(where required) (1 No), Sewage Collection Tank(1 No), Raw Sewage Pumps (2 Nos(1W+1S)), Air Blower( 2 Nos(1W+1S)), FBBR/MBBR containerized (1 No), Recirculation Pumps (1 No), Dosing Tanks (2 No), Dosing Pumps (2 Nos(1W+1S)), Filter feed pumps (2 Nos(1W+1S)), Pressure Sand filter (1 No), Activated Carbon filter (1 No), Treated Water Collection Tank(1 No), Treated water Transfer pumps (2 Nos(1W+1S)), Sludge holding tank(1 No ), Mechanical filter pree Mechanical filter press (1 No), Sludge feeding pumps (2 Nos(1W+1S)), Sludge Drying Bed( 1 No) No extra payment shall be made to the successful contractor for making the Sewage treatment plant fully operational and meeting the desired treated water quality by aforesaid means including all accessories which might be needed for the system to serve its purpose. Scope of work also includes design and construction of all types of civil works for underground/above ground RCC chambers, tanks etc. for screen chamber, Oil & Grease traps, equalization tank, sewage collection tank etc. and foundations for equipment such as pumps, blowers, filter press, pipe supports etc., all complete as per manufacturer’s specifications and directions of the Engineer-in-Charge. Scope also includes getting design and drawings approved through TPI inspector from the list of TPI Inspection agencies as well as TPI of materials before dispatch

a) 5 kLD in 8 hours (Unit of measurement EA (Lump sum)

Part B: Associated Lumpsum Civil and Electrical/ Instrumentation works for functioning of STP

Civil, Electrical/ Instrumentation work

Part-C: Cost of credible spares for operation of STP

Cost of credible spares as per bidder's design and detailed engineering

Part D: AMC cost for STP for period of 5 years AMC 5 years for STPs after warranty of 2 years

2x5 kLD in 8 hours (Unit of measurement of quarter)

Charges for additional visits beyond specified in scope of AMC. (Per visit comprises of 2 days)

Part-A: Supply, Commissioning of STP: Rewari Terminal SEWAGE TREATMENT PLANT as per the Technical Specification . (As below) a) The scope of activity shall include design, drawings, getting approval from statutory authorities, supply, supervision, erection, testing and commissioning of required capacity of STP as specified below with all electrical, mechanical, civil and piping works. b) Scope of supply of each Sewage Treatment Plant shall include but not necessarily be limited to following equipments to achieve the outlet quality as per Clause 4.0 Design Parameters of the Technical Specification. Any additional equipment required to achieve treated water quality shall be included by the Vendor in their scope of supply. List of Equipments for each of the skid mounted STPs Bar Screen (1 No), Grit Chamber (1 No), Oil & Grease Trap Chamber(where required) (1 No), Sewage Collection Tank(1 No), Raw Sewage Pumps (2 Nos(1W+1S)), Air Blower( 2 Nos(1W+1S)), FBBR/MBBR containerized (1 No), Recirculation Pumps (1 No), Dosing Tanks (2 No), Dosing Pumps (2 Nos(1W+1S)), Filter feed pumps (2 Nos(1W+1S)), Pressure Sand filter (1 No), Activated Carbon filter (1 No), Treated Water Collection Tank(1 No), Treated water Transfer pumps (2 Nos(1W+1S)), Sludge holding tank(1 No ), Mechanical filter pree Mechanical filter press (1 No), Sludge feeding pumps (2 Nos(1W+1S)), Sludge Drying Bed( 1 No) No extra payment shall be made to the successful contractor for making the Sewage treatment plant fully operational and meeting the desired treated water quality by aforesaid means including all accessories which might be needed for the system to serve its purpose. Scope of work also includes design and construction of all types of civil works for underground/above ground RCC chambers, tanks etc. for screen chamber, Oil & Grease traps, equalization tank, sewage collection tank etc. and foundations for equipment such as pumps, blowers, filter press, pipe supports etc., all complete as per manufacturer’s specifications and directions of the Engineer-in-Charge. Scope also includes getting design and drawings approved through TPI inspector from the list of TPI Inspection agencies as well as TPI of materials before dispatch

a) 10 kLD in 8 hours (Unit of measurement EA (Lump sum)

a) 15 kLD in 8 hours (Unit of measurement EA (Lump sum)

Part B: Associated Lumpsum Civil and Electrical/ Instrumentation works for functioning of STP

Civil, Electrical/ Instrumentation work

Part-C: Cost of credible spares for operation of STP

Cost of credible spares as per bidder's design and detailed engineering

Part D: AMC cost for STP for period of 5 years AMC 5 years for STPs after warranty of 2 years

10 kLD in 8 hours (Unit of measurement of quarter)

15 kLD in 8 hours (Unit of measurement of quarter)

Charges for additional visits beyond specified in scope of AMC. (Per visit comprises of 2 days)

Part-A: Supply, Commissioning of STP: Bijwasan Terminal SEWAGE TREATMENT PLANT as per the Technical Specification . (As below) a) The scope of activity shall include design, drawings, getting approval from statutory authorities, supply, supervision, erection, testing and commissioning of required capacity of STP as specified below with all electrical, mechanical, civil and piping works. b) Scope of supply of each Sewage Treatment Plant shall include but not necessarily be limited to following equipments to achieve the outlet quality as per Clause 4.0 Design Parameters of the Technical Specification. Any additional equipment required to achieve treated water quality shall be included by the Vendor in their scope of supply. List of Equipments for each of the skid mounted STPs Bar Screen (1 No), Grit Chamber (1 No), Oil & Grease Trap Chamber(where required) (1 No), Sewage Collection Tank(1 No), Raw Sewage Pumps (2 Nos(1W+1S)), Air Blower( 2 Nos(1W+1S)), FBBR/MBBR containerized (1 No), Recirculation Pumps (1 No), Dosing Tanks (2 No), Dosing Pumps (2 Nos(1W+1S)), Filter feed pumps (2 Nos(1W+1S)), Pressure Sand filter (1 No), Activated Carbon filter (1 No), Treated Water Collection Tank(1 No), Treated water Transfer pumps (2 Nos(1W+1S)), Sludge holding tank(1 No ), Mechanical filter pree Mechanical filter press (1 No), Sludge feeding pumps (2 Nos(1W+1S)), Sludge Drying Bed( 1 No) No extra payment shall be made to the successful contractor for making the Sewage treatment plant fully operational and meeting the desired treated water quality by aforesaid means including all accessories which might be needed for the system to serve its purpose. Scope of work also includes design and construction of all types of civil works for underground/above ground RCC chambers, tanks etc. for screen chamber, Oil & Grease traps, equalization tank, sewage collection tank etc. and foundations for equipment such as pumps, blowers, filter press, pipe supports etc., all complete as per manufacturer’s specifications and directions of the Engineer-in-Charge. Scope also includes getting design and drawings approved through TPI inspector from the list of TPI Inspection agencies as well as TPI of materials before dispatch

a) 5 kLD in 8 hours (Unit of measurement EA (Lump sum)

a) 15 kLD in 8 hours (Unit of measurement EA (Lump sum)

Part B: Associated Lumpsum Civil and Electrical/ Instrumentation works for functioning of STP

Civil, Electrical/ Instrumentation work

Part-C: Cost of credible spares for operation of STP

Cost of credible spares as per bidder's design and detailed engineering

Part D: AMC cost for STP for period of 5 years AMC 5 years for STPs after warranty of 2 years

5 kLD in 8 hours (Unit of measurement of quarter)

15 kLD in 8 hours (Unit of measurement of quarter)

Charges for additional visits beyond specified in scope of AMC. (Per visit comprises of 2 days)

WATERNEER TECHNOLOGIES INDIA PVT LTD

Mentor Water Experts Pvt. Ltd.

KRISHNA GANGAA ENVIRO SYSTEM PVT.LTD.

WATERNEER TECHNOLOGIES INDIA PVT LTD

Mentor Water Experts Pvt. Ltd.

KRISHNA GANGAA ENVIRO SYSTEM PVT.LTD.