REPLACEMENT OF DEFI FURNITURE AGAINST CONDEMNATION / BER AT BSO GIRINAGAR PUNE-25

Amount

Almirah Steel Large Overall size of almirah large steel is 1900mm high, 910mm wide and 490mm deep. The MS sheet used for making sides, front, drawers, partitions, base and shelves of the almirah shall be of 20 gauge except the back which shall be of 22 gauge. Three shelves shall be fixed at an equidistant positions as shown in drg.The locker of the almirah shall be provided with safety handle and lock. The front two doors of the almirah shall be fixed with 75mm long hinges three on each side with proper rivet and welding. The weight of the locker shall not be less than 68 kgs The shelves shall be welded to sides and back of almirah internally as shown on drg.One chromium plated rod of 20mm dia shall be fixed at 75mm below the top for hanging purpose. The entire almirah shall be treated with granular silver grey shade irrespective of what is shown on drg.Rest all as per drg. Drg No : FD/E6/MAP/18

Almirah Steel Medium DIMENSION: Overall size shall be 1270mm high,765mm wide and 440mm deep. DESCRIPTION: The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves.All joints and welding, fixing shall be done according standard workmanship HANDLE: A steel chromium plated handle 100mm long shall be provided to the shutter. LOCKING DEVICE: The locking device shall be three way locking device and shall also be provided with decorative key plate .Make of Lock-Harrison/Godrej. FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of green hammerpaint over a coat of primer with spray machine after preparation of surfaces. A mark of MES shall also be provided on left top corner of front shutter of visisble colour as directed by Engr-In -Charge.Rest all as per drgs. Drg No : FD-1032

Bed Hard Overall size shall be 2050mm long, 900mm wide and 400mm high. All Steel shall be MS Square pipe of 18 Gauge. The head board shall be 800mm high and Foot board shall be 500mm high. The frame of head board and foot board shall be of 38mmx38mm MS square pipe.18mmx18mm MS square pipe shall be provided in the inner of head board frame/foot board frame as shown in drg.18mm thick both side decorative prelaminated particle board of walnut shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick rectangular pipe with standard workmanship both in head board/foot board..25mmx65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR ply of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed.All metal /iron work shall be treated with synthetic enamel black after doing two coats of metal primer.Rest all as per drg. Drg No : FD/E6/MAP/08 ®

Receptacle PVC The body of receptacle PVC shall be made up of thick polymer plastic .It shall be of capacity 20 liters, provided with lid and handle as shown in drg. Drg No : FD-E6/MAP/13

Chair Dining Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm..Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm.All sizes shall be taken as stated in specification, irrespective of what is shown on drg. All wood surfaces shall be lacquer polished with high gloss finish of walnut shade.Rest all as per drg. Drg No : FD/MAP-II/04

Chair writing DIMENSION:The overall size of the chair shall approx be 950mm high,500mmwide DESCRIPTION:It shall be of trade pattern and of one make and model as described.The size /dimensions of the chair shall meet the overall specification as described.The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section.Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back.Arm rest shall be of black integral skin poly urethane with shore “A” hardness and reinforced with MS insert.It shall be scratch and wheather resistant.Both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. FINISH:Pre treated with epoxy powder caoted oven baked with ivory white colour/white/warmgrey. Drg No : FD/E6/MAP/12

Chair Verandah The overall size of the chair shall be 455mm wide 455mm deep and 940mm high. The frame of the chair shall be of 19mm dia MS tube of wall thickness 1.6mm duly powder coated. The seat and back of the chair shall be of PVC 4mm of weight not less than 1.85 kgs and grooves 90x10mm ten in nos on seat and back. One stiffener 19mm dia MS tube shall be provided in between the front legs as shown in drg. An additional support in seat and back shall be provided at centre between the seat and back duly welded for rest of PVC seat irrespective of what is shown on drg. Rubber shoes of best quality shall be provided to each end of legs.Rest all as per drg. Drg No : FD/MAP-II/06

Chair Easy DIMENSION: Overall size shall be 510 mm long, 575mm wide and 720mm high . DESCRIPTION:- All wood shall be first class teak (MP). Front legs shall be 30mmx55mm in section and 355mm high up to seat level. Rear legs shall be of 30mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. Front, back and side rails of seat shall be out of 30mmx55mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear Teak wood arm rests shall be provided at 150mm above seat level and shall be of 30mmx55mm in section as shown on drawing. Back rest shall be made of frame consisting of top horizontal rail of 30mmx100mm in section out of 60mmx100mm teak wood made to shape as shown on drawing and lower horizontal rail of back rest shall be of 30mmx100mm in section joined together by vertical side rails of 30mmx25mm in section teak wood to form the frame |Caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. Caning shall be done in Godrej pattern. PVC shoes 25mmx25mm shall be provided at the bottom of all legs. FINISH:- All wood surfaces exposed to view when placed in position shall be given high gloss French polish with lacquer finish. Drg No : FD-229

Sofa set 5 seater DIMENSION:-Overall size of three seat piece shall be 1730mm long, 745mm wide and 530mm high up to arm rest level.Overall size of one piece shall be 670mm long and 745 mm wide and 530mm high up to arm rest level. DESCRIPTION: The sofa set to seat five shall consist of one large three seat piece and two small one seat pieces.. All wood shall be of first class teak wood (MP) legs of sofa set shall be 70mm x35mm in section teak wood . Front legs shall be jointed by 100mm x 35mm in section wooden rail in front . Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides. 100mm thick seat cushion and back cushions shall be of size 530mm x 560mm (three numbers in seat and three numbers in the back for the large seat). In one seat sofa chair the cushion shall be one in back and one in seat of size 530mm x 560mm. The cushion shall be of cool foam or any other superior quality foam of 32 density as approved by Engineer-in-charge.Cushion shall be covered with approved color tapestry cloth(approved by GE , not less than Rs:300/meter) or as directed by Engineer-in-charge. FINISH:All wood surface exposed to view when placed in position shall be French polished with lacquer finish rest.Rest all as per drg. Drg No : FD-373

Table dining 6 pers IMENSION:Overall size shall be 1500mm long, 900mm wide and 750mm high. DESCRIPTION: All wood shall be of first class teak wood (MP).The top shall be of prelaminated MDF board of 18/19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only . Four legs shall be 90mm×45mm in section and 750mm high. Legs shall be joined by 45mm×90mm teak wood rails in long and short sides at top in such a way that top of legs and top of rails shall be at one level.25mmX45mm teak wood wooden member of size 900mm long shall also be provided as shown in drg. Two stiffeners of 90mm×25mm in section shall be fixed equally spaced joining the long rails with dove tailed joints.Four wooden brackets /corners of size 100mmx100mmx35mm thick shall also be provided over 150mmx30mmx5mm angle iron bracket. 25mm×25mm PVC shoes shall be provided at the bottom of the table.Rest all as per drgs FINISH:All wood surfaces exposed to view when placed in position shall given high gloss French polish with lacquer finish. Drg No : FD/MAP-II/03

Table Dressing Ladies DIMENSION:The overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. DESCRIPTION:- The sides, top ,back and front of the base unit shall be of 18mm thick prelaminated MDF board. The bottom of the side units shall be of 12mm thick commercial plywood. The sides and back drawers shall be of 12mm thick prelaminated MDF ,bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated MDF board.5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. The plywood shall be fixed on two vertical hardwood member of size 45mmx35mm a horizontal support of size 30mmx20mm shall be provided in between two vertical members. The Overall size of the stool shall be 440mm long 350mm wide and 425mm high. The four sides shall be of 18mm thick prelaminated MDF .The top of the stool shall be of 12mm thick plywood openable as shown in drg.Four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20mmx20mm.The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth as approved by Engr-In-charge/GE.Rest all as per drg. Overall size shall be 900mm long, 380mm wide and 1700mm high (height is the mirror). Drg No : FD/MAP-II/07

Table Dressing Gents DIMENSION: Overall size shall be 900mm long, 300mm wide and 150mm high at bottom with support of mirror as 1115mm high. DESCRIPTION: The frame of mirror shall be overall size of 410mm wide and 790mm high, fixed at 150mm from top of lower base.The entire box shall be made of 12mm thick prelaminated MDF board except back and bottom which shall be of 12mm thick plywood .The sides of the drawers shall be made of 12mm thick commercial ply with bottom of 6 mm ply and front of 12mm thick prelaminated MDF board.The mirror of 380mmx760mm shall be provided with its wooden frame made of 25mmx35mm teak wood battens.The bach shall be of 6mm thick plywood.5.5mm thick mirror distortion free shall be provided on 6mm thick plywood backing..3mm thick flat iron key plates of MS.Two knobs of aluminium anodized dark brown in shade shall be provided to both the drawers. 25mmx25mm in section shall be provided at top of mirror and painted with black paint. FINISH:All wood surfaces shall be french polished with high gloss finish. Drg No : FD-230

Teapoy Verandah Overall size shall be 700mm long 400mm wide and 540mm high. The legs, top centre stiffener, top rails and bottom rails shall be of 18mm square MS pipe of wall thickness 1.6 mm.Base tray made of 5mm dia MS bar 12x10 nos at equidistant shall be made and fixed as shown on drg.The top shall be of 18mm thick pre laminated particle board of approved shade and the edges shall be covered with 4mm thick teak wood beading. Hard rubber shoe shall also be fixed to the bottom of each leg.The steel frame shall be painted with synthetic enamel black colour.Rest all as per drg. Drg No : FD/E6/MAP/17

Table writing DIMENSION:Overall size shall be 1145mm long, 600mm wide and 760mm high. DESCRIPTION: All wood shall be of first class hard teak wood except top and right hand side drawer cabinet. Legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. The top shall be of 18mm thick prelaminated MDF board of approved shade and the edges shall be covered with 4mm thick teak wood beading. Two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. Sides of the box which house the drawer and cabinet shall be 18mm thick prelaminated particle board exterior grade. Sides and back of drawers shall be of 12mm thick teak wood planks. Bottom of drawers shall be of 6 mm thick plywood commercial.6mm thick plywood commercial 75mm high partition shall be provided in the drawer. Shutter for cabinet shall be fixed with piano type continuous hinges. Lock shall be provided to drawer and shutters. Recessed handle shall be provided to drawer and shutter.25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. FINISH: All wood surfaces shall be French polished with high gloss finish. Rest all as per drg. Drg No : FD-275

Table Centre DIMENSION: Overall size shall be 900mm long, 450mm wide and 400mm high. DESCRIPTION: All wood shall be of teak wood. Top of the table shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of top.Legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs.The bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss.The bottom tier shall be of 18mm thick prelaminated particle board exterior grade of approved shade with 4mm thick teak wood beading all-round the edges of both the tops.25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. FINISH:All wood surfaces shall be French polished with high gloss finish Rest all as per drg. Drg No : FD-274

Peg Table DIMENSION;Overall size shall be 450mm long,300mm wide and 380mm high. DESCRIPTION:Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed between the legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of table shall be of 18mm thick prelaminated MDF board of approved shade.4mm thick teak wood beading shall be provided alround the top edges of table. FINISH:All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.Rest all as per drg. Drg No : FD-277

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3097616)

swastik industries (BID ID -3099145)

agarwal and company (BID ID -3098614)

Mahesh Traders (BID ID -3097661)